20. if you were trying to build a soundproof room, which of the following materials would you choose to absorb the most sound, based on the coefficient of absorption for each material? a. carpet b. clay tile c. heavy curtains d. wood

1.5 × 10³V is the potential difference between the two points where work done by external agent to move a point charge of 2 mc from the origin to a point 3 m away is 5 J.

The quantity of current times the resistance equals the potential difference (also known as voltage), which is equal to that. When a charge travels between two locations in a circuit, a potential difference of one Volt is equivalent to one Joule of energy being used by that charge.

W = 5J, the amount of work required to move the point charge by the external agent.

q = 2 mC, is the point charge.

Description of the work is,

W = Vq

V=W/q

Replace the values listed,

V = 5J / 2mC

V = 5J / 2 × 10 ⁻³C

V = 2.5 × 10³ V

Consequently, the possible discrepancy between the points is 1.5 × 10³V

To learn more about potential difference, visit:

https://brainly.com/question/12198573

#SPJ4

The light left the star 100,000 years ago, if we are seeing a star which is 100,000 light years away.

There are different units to measure the length or distance, like: kilometers, meters are used to measure the distance of larger magnitude like length of the road, length of the cricket pitch. But astronomical distances are very large in length and they are measured by using a bigger unit, like: light year. A light year is a distance travelled by the light in a single year. it is equal to (3.0 × 10⁸ × 86400×365) ≈ 9.46 × 10¹⁵ meters. Hence we can say that light has left the star 100,000 years ago.

To  know more about light years, here

https://brainly.com/question/1302132

#SPJ4

The magnitude of the average force is 120,000 N.

A factor is an effect that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or even a pull. A force is a vector quantity since it has either magnitude and direction.

Determine the car's acceleration when it is stopping: take the car in the + direction

v = u + at

0 = 10m/s + a*0.1

0.1a = -10m/s

a = -1000 m/s^2

a = 100m/s^2 in opposite direction to direction of car

F = m*a

F = 1200kg * -100m/s^2

F = -120,000 N

Force = 120,000 N in opposite direction to direction of car

To know more about force visit :

https://brainly.com/question/13191643

#SPJ4

The acceleration of the boxes are 1.625 m/s^2.

What is acceleration?

Acceleration is a measure of how much an object's velocity changes over time. Velocity is a vector quantity that includes both speed and direction, so acceleration can refer to changes in speed, direction, or both. Acceleration is typically measured in meters per second squared (m/s^2) or feet per second squared (ft/s^2). Positive acceleration indicates an increase in speed, while negative acceleration indicates a decrease in speed.

To find the acceleration of the boxes, we can use the formula:

force = mass x acceleration.

In this case, we know the force applied (39.0 N) and the mass of the boxes (9.00 kg + 14.0 kg + 1.00 kg = 24.00 kg).

So we can calculate the acceleration as:

force = mass x acceleration

39.0 N = 24.00 kg x acceleration

acceleration = force / mass

acceleration = 39.0 N / 24.00 kg

acceleration = 1.625 m/s^2

Therefore, the acceleration is 1.625 m/s^2.

To learn more about acceleration from the given link:

https://brainly.com/question/26408808

#SPJ4

Its velocity (in m/s) just before it strikes the floor is - 5.42 m/s.

The displacement that an object or particle experiences with respect to time is expressed vectorially as velocity. The meter per second (m/s) is the accepted unit of velocity magnitude (also known as speed). Alternately, the magnitude of velocity can be expressed in centimeters per second (cm/s).

Velocity is the pace and direction of an object's movement, whereas speed is the time rate at which an object is travelling along a path. In other words, velocity is a vector, whereas speed is a scalar value.

Given,

height = 1.50m

rebound height = 1.00m

Using the equation of motion,

v² = u² - 2as

⇒ v = - √(u² + 2(-9.81 m/s² × - 1.50m))

⇒v = - 5.42 m/s

To learn more about Velocity from given link

https://brainly.com/question/25749514

#SPJ4

Explanation:

I assume the polls of the 2 magnets are +/+ and -/- aligned, so that both magnets repel each other.

when we add weight, it will be lower, as more weight (more pressure, more power) forces the magnets to get closer, as their repelling force is constant per distance.

The density of gold can be calculated by dividing the mass of the gold nugget (16.60 g) by the volume of water it displaces (in cm3).

The density of a material can be calculated by dividing the mass of the material by its volume. The formula is Density = Mass/Volume. In this case, the mass of the gold nugget is given (16.60 g) and the volume of water it displaces can be measured by reading the graduated cylinder.

To calculate the density of gold, we need to know the volume of water that the gold nugget displaces. To find the volume, we can subtract the initial water volume (V1) from the final water volume (V2) after the gold nugget has been added. We can then use the formula density = mass/volume to find the density of the gold nugget.

Density = mass / volume

Density of gold = 16.60 g / (V2 - V1)

The volume of water displaced by the gold nugget needs to be measured in order to calculate the density of the gold nugget.

To know more about gold nugget visit:

brainly.com/question/28507154

#SPJ4

The energy of a 679 nm photon emitted from a light source is 1.76*10^5 J.

A photon is a tiny energy packet of electromagnetic radiation, also referred to as a light quantum. Albert Einstein's account of the photoelectric effect, in which he proposed the existence of discrete energy packets during the transmission of light, gave rise to the concept of the photon in 1905.

The electron-volt (eV), rather than the joule, is a commonly used unit of energy when discussing "particles" like photons or electrons (J). A photon with an energy of 1 eV = 1.602* 10^-19 J is the energy needed to elevate an electron through 1 volt.

E =hν

E = h*c/λ

h = 6.626*10^-34 J.s

c = 3*10^8 m/s

λ = 679*10^-9 m

1 mol photons = 6.023 x 10^23 photon

Energy of one photon [tex]E=\frac{6.626*10^-34*3*10^8}{679*10^-9}[/tex]

[tex]E=\frac{6.023*10^23*6.626*10^-34*3*10^8}{679*10^-9}[/tex]

[tex]E=1.76*10^5J[/tex]

To know more about photon energy visit:

https://brainly.com/question/28463226

#SPJ4

The resistance of a 1500 watt (120 volt) hair dryer is 12 ohms.

Resistance is an opposition or a refusal to accept or comply with something. It is the ability to withstand or overcome something, such as an opposing force or influence. Resistance can also refer to a process of gradual change or transformation over time. Resistance is often seen in the form of protests, civil disobedience, or other forms of dissent. Resistance can also refer to the refusal to accept something as true or valid, such as a political or social ideology.

This can be determined by using Ohm’s Law, which states that voltage (V) is equal to the current (I) multiplied by the resistance (R). Therefore, if the voltage is 120 volts and the wattage is 1500 watts, the resistance can be calculated as follows: R = V/I = 120/1500 = 0.08, or 12 ohms.

It is important to note that the above calculation only applies to a hair dryer that runs on direct current (DC). If the hair dryer is running on alternating current (AC), the resistance may be slightly different. The resistance of an AC-powered hair dryer can be determined by measuring the current and voltage with a multimeter.

To know more about resistance click-
https://brainly.com/question/17563681
#SPJ4

The final velocity of the two vehicles as they move as a single mass is 18.42 m/s.

The total momentum of the two vehicles before the collision is:

momentum_initial = mass_suv ×velocity_suv + mass_car × velocity_car

The total momentum of the two vehicles after the collision is:

momentum_final = (mass_suv + mass_car) ×velocity_final

Since momentum is conserved, the initial momentum is equal to the final momentum:

momentum_initial = momentum_final

mass_suv × velocity_suv + mass_car × velocity_car = (mass_suv + mass_car) ×velocity_final

By substituting the given values, we can solve for the final velocity_final:

1217 kg * 20.8 m/s + 1087 kg * 14 m/s = (1217 kg + 1087 kg) * velocity_final

velocity_final = (1217 kg * 20.8 m/s + 1087 kg * 14 m/s) / (1217 kg + 1087 kg)

velocity_final = 18.42 m/s

The final velocity of the two vehicles as they move as a single mass is 18.42 m/s.

If you need to learn more about finding the velocity, click here

https://brainly.com/question/20668174?referrer=searchResults

#SPJ4

Answer:

The angle of refraction be 3.21°

Explanation:

Let the angle of refraction = r

Given,

Angle of incidence, i = 0.5°

Refractive index of amber, n = 1.55

Refractive Index can be calculated by  n = sin i/sin r

⇒ n = sin i/sin r

⇒ 1.55 = sin 0.5°/sin r

⇒ sin 0.5° =  0.0087

⇒ 1.55 =  0.0087/ sin r

⇒ sin r = 0.0087/1.55

⇒ sin r = 0.0056

⇒ r =  sin−1(0,0056)

⇒ r = 3.21°

A system must meet two requirements for its momentum to be conserved: The mass of the system must remain constant during the interaction.

What is momentum?

To know more about momentum, click the link given below:

https://brainly.com/question/29598011

#SPJ4

The velocity midway between P and Q is 25 m. Based on the direction of the displacement, the average velocity might either be positive or negative.

We say an object has uniform acceleration if its speed (velocity) is growing at a constant pace. Acceleration happens at a steady rate. A car's acceleration is not uniform if it accelerates quickly, then slows down, and then accelerates again.

In terms of time, an object or particle's movement is expressed vectorially as velocity. The recognized measurement of velocity magnitude is the meter per second (m/s) (also known as speed). A different way to indicate velocity is in centimeters per second (cm/s).

The velocity midway between P and Q can be found using the average velocity formula. Average velocity is given by:

Average velocity = (Initial velocity + Final velocity) / 2

In this case, the initial velocity is 20 m/s and the final velocity is 30 m/s. Therefore, the average velocity is:

Average velocity = (20 m/s + 30 m/s) / 2 = 25 m/s

So the velocity midway between P and Q is 25 m/s.

To know more about velocity visit:

https://brainly.com/question/29223620

#SPJ4

The initial potential gravitational energy will be 0 joules because the height will be zero.

Potential energy is the energy that is stored in any object of reffred to its height of the base of surface of earth. The object or system is unaffected by external factors like air or height. The power of moving particles within a system or an item is referred to as kinetic energy.

Potential energy is often represented by its height from surface. Height-dependent energy is known as gravitational potential energy. Weight determines the potential energy amount (mass times gravity).

To know more about potential energy visit:

https://brainly.com/question/24284560

#SPJ1

Answer: 1a. To find the recoil velocity on the staple gun after firing the staple, we need to use the principle of conservation of momentum. This principle states that the total momentum of an isolated system remains constant if no external forces act upon it.

The momentum of an object is given by the formula p = mv, where m is the mass and v is the velocity of the object.

Let's assume the mass of the staple is m_s and the velocity of the staple after being fired is v_s. The mass of the staple gun is m_g and the velocity of the staple gun after firing the staple is v_g.

According to the principle of conservation of momentum, the initial momentum of the system (before firing the staple) is zero, and the final momentum of the system (after firing the staple) is:

m_s * v_s + m_g * v_g = 0

We know the mass of the staple gun is 0.910 kg, the mass of staple is 6.8g, velocity of the staple is 1.23 m/s. So we can calculate the recoil velocity on the staple gun after firing the staple by solving the above equation:

(m_s * v_s) + (m_g * v_g) = 0

(6.8 * 10^-3 kg * 1.23 m/s) + (0.910 kg * v_g) = 0

v_g = -(6.8 * 10^-3 kg * 1.23 m/s) / 0.910 kg = -0.0075 m/s

The recoil velocity on the staple gun after firing the staple is -0.0075 m/s (negative sign indicates that the recoil velocity is in the opposite direction of the staple)

1b. The recoil velocity is so small because the mass of the staple is much smaller than the mass of the staple gun. Therefore, the staple gun will only experience a small recoil velocity due to the firing of the staple. This is because the principle of conservation of momentum states that the momentum of an object is directly proportional to its mass and velocity. In this case, the velocity of the staple is much larger than the velocity of the staple gun, but the mass of the staple is much smaller than the mass of the staple gun, which results in a small recoil velocity.

Higher amplitude indicates higher energy. these statements about a wave's amplitude is true.

what is energy ?

Energy is the ability to do work. It is a fundamental concept in physics and is defined as the ability to do work or produce heat. Energy is the capacity to cause change and can be stored in a variety of forms such as kinetic, potential, thermal, electrical, mechanical, and chemical.

Kinetic energy is the energy of motion; potential energy is the energy stored in an object due to its position; thermal energy is the energy related to the temperature of an object; electrical energy is the energy related to the movement of electrons; mechanical energy is the energy related to the motion of an object; and chemical energy is the energy stored in the bonds of atoms and molecules. Energy can be converted from one form to another, and although energy can never be created or destroyed, it can be transferred from one system to another.

To learn about more energy.

https://brainly.com/question/13881533

#SPJ1

The acceleration of block m1 is (ma-ma-mulo/im.mpma).

Acceleration is the rate at which an object's velocity with respect to time changes. It is a vector quantity to accelerate (in that they have magnitude and direction). The direction of the net force acting on an object determines the direction of its acceleration.

The acceleration of block m1 (ma) can be determined by analyzing the net force acting on it, which is equal to the tension in the string connected to it, minus the weight of the block.

Tension in the string connected to m1 is equal to the tension in the string connected to m3, since the two strings are light and inelastic. Therefore, the net force acting on m1 is equal to T - m1g, where T is the tension in the string and g is the acceleration due to gravity.

The tension in the string is equal to the acceleration of m3, since

T = m3a. Therefore, the net force acting on m1 is equal to m3a - m1g.

m1 is connected to m2 and m3, so the acceleration of m1 is dependent on the masses of m1, m2 and m3.

Therefore, the acceleration of block m1 is (m3-m1-m2)/(m1+m2+m3) which corresponds to option D) (ma-ma-mulo/im.mpma).

To know more about acceleration, visit:

brainly.com/question/12550364

#SPJ4

The nylon string lengthened by 3.89 cm from its untensioned length of 30.0 cm, if the tennis racket is under a tension of 275 N and the diameter of the string is 1.00 mm.

Force on the string, F = 275 N

Diameter of the string = 1 mm

Cross-sectional area of the string, A = (π/4)×1²= 0.785 mm²

Initial length of the string, L = 30.0 cm

Modulus of elasticity of the nylon, E = 2700 N/mm²

Let the change in the length of the string = Δl

By the formula, Δl = (F×L)/(A×E)

Δl = (275×30)/(0.785×2700)

Δl = 3.89 cm

To know more about tension, here

https://brainly.com/question/15880959

#SPJ4

By doubling the mass and the radius, the force of gravitation would also be doubled as it is directly proportional to the mass of the interacting objects.

The more massive object will pull the other body with a stronger gravitational pull since the force of gravity is exactly proportional to the masses of the two interacting bodies. Therefore, when two things' respective masses increase, so does their gravitational pull to one another. The gravitational pull between any two objects is equal to the product of their individual masses. Hence, if the mass is doubled, the gravitational force will also get doubled.

According to the Newton's law of universal gravitation, force of gravitation is directly proportional to the masses of the two interacting bodies while it is inversely proportional the the square of the distance between them. Putting 'G' as the proportionality constant, we get that

F = Gm1m2 / r²

where, m1 and m2 are the masses of the two bodies, and r is the distance between them.

To know more about gravitational force, refer to the following link:

https://brainly.com/question/11760568

#SPJ4

Answer:

They move and collide faster.

Explanation:

This is because increasing the temperature increases the kinetic energy of the gas particles. As a result they move rapidly having more more frequent collisions.

Answer:

When the temperature of the container increases, the kinetic energy of the gas molecule becomes high.

Explanation:

This means the collision rate of the particles increases. Due to the collision of gas particles, the pressure increases across the wall of the container.

The number of the square tiles that would be needed to tile the entire room is 2,800 tiles.

The area of the room is calculated by applying the following formula as shown below.

Mathematically, the formula for area of a rectangular room is given as;

A = L x B

where;

Area = 350 m x 200 m

Area = 70,000 m²

The area of the square tiles is calculated as follows;

A = L x L

where;

A = 5 m x 5 m

A = 25 m²

The number of the square tiles that would be needed to tile the entire room is calculated as follows;

n = area of the entire room / area of each square tile

n = ( 70,000 m² ) / ( 25 m² )

n = 2,800

Learn more about area of square here: https://brainly.com/question/813881

#SPJ1

All electromagnetic waves are organized into a continuum called the electromagnetic spectrum according to their frequency and wavelength.

The wavelength, which will also apply to troughs, is the separation between two wave crests. The frequency is measured on cycles per second (Hz), which is the quantity of vibrations that cross a specific area in a second (Hertz). In this article, the relationship between frequency and wavelength is covered.

Here are some wavelength examples: Yellow Light is a prime example. The wavelength range of all visible light is 400 to 700 nanometers (nm). The wavelength of yellow light is 570 nanometers or such. Wavelength (nm) (nm)

To know more about wavelength visit:

https://brainly.com/question/13533093

#SPJ4

The mass flow of ammonium-n passed by any point in the lake after the two sources have become mixed depends on the combined rate of release from the sources.

What is the mass ?

The amount of matter that makes up a thing is measured by its mass.. It is typically measured in kilograms or grams and is an important quantity in physics and chemistry. Mass is different from weight, which is a measure of the force of gravity on an object. Mass is an intrinsic property of an object, meaning it is independent of the object's environment. Mass is conserved, meaning it cannot be created or destroyed, only changed through physical or chemical reactions.

To learn more about mass

https://brainly.com/question/19385703

#SPJ4

The time taken to travel 50 m ina 25 m/s average velocity is 2 sec.

The directional speed of an item in motion, as measured by a specific unit of time and viewed from a certain point of reference, is what is referred to as velocity.

An object's position changes if it moves in relation to a reference frame, such as when a passenger travels to the back of an airliner or a lecturer moves to the right in relation to a whiteboard. Displacement describes this shift in location.

When anything moves in connection to a reference frame, such when a passenger moves to the back of an airplane or a lecturer walks to the right in relation to a whiteboard, the location of the item changes. This locational change is described as displacement.

The displacement is = 50 m

The average velocity = 25 m /sec

The time taken is = displacement/ average Velocity  = 50/25 = 2 sec.

To learn more about Velocity refer to :

https://brainly.com/question/29620915

#SPJ1

The eye changing light waves into impulse and the ear changing sound waves into impulses are examples of transduction.

Transduction is the method of translation of arriving signal into a command transfer to the brain by a sensory receptor. It starts when stimulus changes the membrane potential of a receptor cell, which converts the signal energy in a stimulus and then into an electrical signal. Receptors are categorized into two main categories: exteroceptors, and interoceptors. Exteroceptors receive external sensory stimuli, and interoceptors receive internal sensory stimuli.

in visual system, cone and rods are the sensory cells that convert the physical light energy signal into electrical signal. In auditory system, hair cells transduced the sound vibrations into electrical signal and transfer them to the brain.

To know more about transduction, here

https://brainly.com/question/12974399

#SPJ4

The region that best matches a typical IR spectrum is 4000 to 400 cm-1.

The IR spectrum is a plot of transmitted (or absorbed) frequencies versus transmission intensity (or absorption).

The region that best matches a typical IR spectrum is typically considered to be 4000 to 400 cm-1 , also known as the "fingerprint region" as it contains the majority of the vibrational absorption bands for most organic compounds.

However, it's worth noting that different types of compounds or samples may exhibit different spectral features and may require different regions to be examined in order to obtain meaningful information.

To know more about IR spectrum , visit:

brainly.com/question/15452269

#SPJ4

True, the speed of individual particle diffusion is influenced by temperature and particle size, not by concentration.

Prolixity is the tendency of motes to spread out in order to enthrall an available space. feasts and motes in a liquid have a tendency to diffuse from a more concentrated terrain to a lower concentrated terrain. Passive transport is the prolixity of substances across a membrane. This is a robotic process and cellular energy isn't expended. motes will move from where a substance is more concentrated to where it's less concentrated. The rate of prolixity for different substances is affected by membrane permeability.

Learn more about diffusion visit:

brainly.com/question/14852229

#SPJ4

False. Increasing the mass attached to a spring will decrease the period of its vibrations.

what is vibrations ?

Vibrations are oscillations in physical systems that happen in the form of kinetic energy being transferred from one point to another. They are caused by a variety of factors, including sound waves, mechanical forces, and electrical currents. Vibrations can produce both audible and inaudible sound, and can be felt as a physical sensation.

Vibrations travel through materials and can be measured using a variety of devices such as accelerometers and vibration meters. In machines and structures, vibrations can indicate the level of stress or strain on components and are used to monitor the health and performance of the system. Vibrations can cause unwanted noise and wear on components, and can be prevented by damping or isolation.

To learn about more vibrations .

https://brainly.com/question/2279743

#SPJ4

Answer: A, C, E

Explanation:

Potassium and sodium both belong to Group 1. They have the same number of valence electrons. Therefore, they form similar compounds with other elements.