Option (c) reverberation is the best choice. Reverberation can be decreased by utilizing materials that absorb sound before it reaches the room's walls and ceiling, preventing the sound from being reflected.
What is reverberation?Reverberation is the characteristic of sound that best explains what just happened in this scenario. Reverberation occurs when sound waves are reflected off of surfaces in a room, creating multiple echoes that can be heard. When a loud noise is made in a large room, the sound waves will reflect off of the walls, floor, and ceiling, creating a series of echoes that can be heard. This is known as reverberation.
Which is better, reverberation or echo?Both open and closed places can produce echoes. In tight environments with many reflecting items, reverberation occurs. The distance of the item can be determined using the echos. Reverberation cannot estimate the distance of a reflecting object because the travel time is too brief.
To know more about echoes visit:
brainly.com/question/14038173
#SPJ4
a bulldozer pushes a boulder with a force of 18,000 n over a distance of 53 m, in a time of 60 s. how much work is done by the bulldozer?
The bulldozer's work done is measured in joules is 954000J, since it is capable of moving a boulder 53 metres with 18,000 newtons of force in just 60 seconds. Force and motion must coexist.
Applied to the body as well as to how the body moves. Consider a block that has been placed on a flat, frictionless surface. This block is affected by a constant force F. The body is moved by this force across a distance of d in a straight line and in the force's direction. In physics, a force is an effect that has the ability to change how an object moves. Due to a force, a massed object may change.
Work done = Force*cos(theta)*d = Force*d = 18,000*53 = 954000J
Learn more about force here
https://brainly.com/question/13191643
#SPJ4
A spring with spring constant k = 340 N/m is used to weigh a 6.7-kg fish. a. (2 pts.) Draw a picture of the fish and label Fspring and F, acting on the fish. Write down Newton's second law for the fish. b. (2 pts.) How far does the spring stretch?
(2 pts.) What is the weight of the fish.spring with spring constant k = 340 N/m is used to weigh a 6.7-kg fish. a. (2 pts.)
What is weight ?
Weight is a measurement of the force of gravity on an object or person. It is typically measured in units of mass such as kilograms, pounds, or ounces. Weight is an important factor in determining a person's overall health, as well as their ability to perform physical tasks.
The spring stretches 0.2 m.
Fspring = F = ma = 340N = 6.7kg * a
a = 340N/6.7kg = 50.7 m/s^2
Δx = vt = 0 * t = 0
Δx = (1/2)at^2 = (1/2)(50.7 m/s^2)(t^2)
t = √(2Δx/a) = √(2*0.2m/50.7 m/s^2) = 0.2 m
To learn about more weight
https://brainly.com/question/229459
#SPJ4
what would be true of a thermometer that always reads three degrees lower than the actual temperature?
A thermometer which always reads three degrees lower than the actual temperature is reliable but it is not valid. Thus, the correct option is E.
How does the thermometer works?A thermometer is generally made up of a small, hollow glass tube. At the bottom of this tube is present a bulb, which holds a liquid such as the alcohol or mercury element. When there is an increase in the heat, the liquid present inside the bulb expands, pushing up into the tube of the thermometer. On the other hand, a decrease in heat lets the liquid contract, moving down the tube of the thermometer.
A thermometer works on the principle which states that solids and liquids tend to expand with temperature. This changes in mercury is studied on a temperature scale.
A thermometer which always reads three degrees lower than the actual temperature can be reliable but it is not valid at all.
Therefore, the correct option is E.
Learn more about Thermometer here:
https://brainly.com/question/24189042
#SPJ1
Your question is incomplete, most probably the complete question is:
What would be true of a thermometer that always reads three degrees lower than the actual temperature?
a. It is valid but not reliable
b. It is both reliable and valid
c. It is neither reliable nor valid
d. It is not valid, but you cannot determine if it is reliable from the information given
e. It is reliable but not valid
assuming that the acceleration does not change, through what additional angle will the disk turn during the next 7.0 s?
The disk will rotate through an additional angle of 52.5 rad during the next 7 seconds.
What is angular acceleration?Angular acceleration is scaled in units of angle per unit time squared (which in SI units is radians per second squared) and is ordinarily characterized by the symbol alpha( α). It is a pseudovector quantity.
To find the additional angle the disk will turn during the next 7 seconds, we can use the equation for angular displacement: Δθ = α × t² / 2 + ωi × t Where: α = angular acceleration (constant), t = time ,ωi = initial angular velocity (which is 0, since the disk is starting from rest)
We know the angular acceleration and time, so we can plug in the values to get: Δθ = α × (7.0s) ² / 2 + 0 × 7.0s
We don't know the angular acceleration, but we know the final angular displacement, which is 30 rad and the time taken which is 4s, so we can use the equation Δθ = α × t²/2 + ωit 30 = α × 4² / 2 + 04
Solving for α, we get: α = 30/8 rad/s²
Now we can use this value of angular acceleration to find the additional angle the disk will turn during the next 7 seconds: Δθ = α × (7.0s) ² / 2 + 0 × 7.0s
Δθ = (30/8) × (7.0s) ² / 2 + 0 × 7.0s
Δθ = (30/8) × 49/2
Δθ = 52.5 rad
So, the disk will rotate through an additional angle of 52.5 rad during the next 7 seconds.
To know more about Angular acceleration, visit:
https://brainly.com/question/29428475
#SPJ4
The complete answer is as follows:
two uniformly charged infinite non conducting planes are parallel to a yz plane and positioned at x 50 cm and x 50 cm the charge densities on the planes are 50 nc m2 and 25 nc m2 respectively what is the magnitude of the potential difference between the origin and the point on the x axis at x 80 cm hint use gauss law
To calculate the potential difference between the origin and the point on the x-axis at x=80 cm, we can use Gauss's Law. the potential difference between the origin and the point x=80 cm is 1.74 x 10^-4 V or 1.74 microvolts
What does the term "potential difference" mean?the difference in potential between two points that symbolizes the labor or energy expended during the transfer of a unit amount of electricity from one spot to another.
The flux through the top face is:
Flux_top = (50 nC/m^2) * (pi*(80 cm)^2) / (8.854 x 10^-12 C^2/Nm^2) = 1.45 x 10^-5 N
The flux through the bottom face is:
Flux_bottom = (25 nC/m^2) * (pi*(80 cm)^2) / (8.854 x 10^-12 C^2/Nm^2) = 7.24 x 10^-6 N
Since the electric field is perpendicular to the planes, the net flux is:
Flux = Flux_top - Flux_bottom = 1.45 x 10^-5 N - 7.24 x 10^-6 N = 6.76 x 10^-6 N
The electric field is then:
E = Flux / (pi*(80 cm)^2) = 6.76 x 10^-6 N / (pi*(80 cm)^2) = 2.17 x 10^-6 N/m^2
To find the potential difference, we need to integrate the electric field along the x-axis from x=0 to x=80 cm.
V = Integral(E dx) = Integral(2.17 x 10^-6 N/m^2 dx) = 2.17 x 10^-6 N/m^2 * 80 cm = 1.74 x 10^-4 V
V = 1.74 x 10^-4 V or 1.74 microvolts
To know more about potential difference visit:
https://brainly.com/question/24142403
#SPJ4
Calculate the adiabatic flame temperature attained when methane at 298k, is combusted (a) with oxygen in the molar ratio air/CH4 = 9.524. Assume that CO2 and H2O are the products of the combustion. The adiabatic flame temperature is that temperature reached if all of the heat of the oxidation reaction is used to increase the temperature of the products of the reaction. Air is 21 molar percent O2 and 79 molar percent N2.
Adiabatic flame temperature of approximately 2300 K or 2027 °C
To calculate the adiabatic flame temperature, we need to know the heat of combustion of the fuel and the specific heat of the products of the combustion.
The heat of combustion of methane (CH4) is -890 kJ/mol. The balanced equation for the combustion of methane with oxygen is:
CH4 + 2O2 -> CO2 + 2H2O + heat
The molar ratio of air/CH4 = 9.524, which means that for every 1 mole of CH4, 9.524 moles of air are used. Since air is 21% O2 and 79% N2, the number of moles of O2 in 9.524 moles of air is (0.21) * (9.524) = 2.00 moles.
The number of moles of CO2 and H2O produced in the combustion of 1 mole of CH4 with 2 moles of O2 is 1 mole and 2 moles respectively
The adiabatic flame temperature is calculated using the equation:
ΔH / (ΔnCp) = ΔT
where ΔH is the heat of combustion of the fuel, Δn is the change in the number of moles of the products, and Cp is the specific heat of the products at constant pressure.
The specific heat of CO2 and H2O are 0.846 and 4.18 J/mol·K respectively.
ΔT = (-890 kJ/mol) / ((1+2) * (0.846 + 2*4.18) J/mol·K)
This gives an adiabatic flame temperature of approximately 2300 K or 2027 °C. This temperature is the highest temperature reached at the flame front when all the heat of combustion is used to raise the temperature of the products and no heat is lost to the surroundings.
To know more about adiabatic flame:
https://brainly.com/question/14863146
#SPJ4
A cell membrane has a resistance and a capacitance and thus a characteristic time constant.
What is the time constant of a 9.0-nm-thick membrane surrounding a 0.040-mm-diameter spherical cell? Assume the resistivity of the cell membrane as 3.6×107 ??m and the dielectric constant is approximately 9.0.
The membrane's time constant is 2.87 ms. The resistance and capacitance of RC circuits are used to calculate the time constant. The time constant's value is determined in milliseconds.
How can the time constant be determined?The time constant is calculated using the equation,
T = R*C in seconds.
Describe the time constant.In physics and engineering, the parameter that specifies how a first-order, linear time-invariant (LTI) system reacts to a step input is known as the time constant, which is typically symbolized by the Greek letter tau. The time constant is the main property of a first-order LTI system.
To know more about time constant visit:
https://brainly.com/question/1597456
#SPJ4
Find the mesh currents i, i2, and i3. Find the mesh currents i1, 2, and i3. 31 3 R2 ib 3 10 V(+ 4 Given Variables: R1:8 ohm R2: 2 ohm R3: 2 ohm Given Variables R1:2 ohm R2 1 ohm R3: 1 ohnm R4: 2 ohnm V1:2V V2:1 V
The mesh current have the values i1=1, i3=2, for the given variables: R1:8 ohm R2: 2 ohm R3: 2 ohm Provided Variables R1:2 ohm R2 1 ohm R3: 1 ohnm R4: 2 ohm V1:2V V2:1 V
The circuit
i₂ = -3A
KCL should be applied at node X id = 3+i3 from ckt Va = (i1-i2).
²\sVa = (i₁+3)
Since this is a super mesh analysis, apply EVL to loop i1, i3.
i₁ = 3ib +i₃\s=3(3+i₃) +i₃\si₁-4i₃=9
the loops 1, 3, and EVL
2(i₁-i₂)
-10+8i₃+2Va+2(i₃-i₂)=0
2i₁-2(-3)
-10+8i₃+2(i₁+3)
2+2i₃-2(-3)=0
i₁(2+4)+i₃(8+2)
-10+2+6+6=0
6i₁+10i₃+14=0
3i1+5i3=7 based on this
i₁=1\si₃= 2
Mesh Current Analysis is a method for locating the currents flowing through any closed channel in a circuit, including a loop or mesh.
Kirchhoff's Laws provide the fundamental framework for analysing any complicated electrical circuit, but there are a number of techniques to enhance this framework by employing Mesh Current Analysis or Nodal Voltage Analysis, which reduces the amount of arithmetic required.
Learn more about Mesh current here:
https://brainly.com/question/28192863
#SPJ4
what is the sum of the kinetic and potential energies of particles in an object called? rotational energy
The sum of the kinetic and potential energies of particles in an object called mechanical energy.
What is mechanical energy?Mechanical energy is the energy possessed by an object due to its motion or due to its position. This energy is derived from the work done on an object.
It can be in the form of kinetic energy, the energy of motion; or in the form of potential energy, the energy an object has due to its position or shape.
Mechanical energy can be converted between the two forms, and is often converted into other forms, such as electrical energy or thermal energy.
Mechanical energy is used to power machines and devices, and is an important source of energy in the modern world.
Therefore, The sum of the kinetic and potential energies of particles in an object called mechanical energy.
To learn more about mechanical energy
Here: brainly.com/question/24443465
#SPJ4
what causes certain elements to be pulled into a region of stronger magnetic field? select all that apply
Most electrons in materials like iron, cobalt, and nickel spin in the same direction. Another extremely magnetic material must enter the magnetic field of an existing magnet in order to become magnetized.
The magnetic influence on moving electric charges, electric currents, and magnetic materials is described by a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetic field acts on it when the charge is travelling through a magnetic field. The magnetic field of a permanent magnet pulls on ferromagnetic substances like iron and attracts or repels other magnets.
Paramagnets, diamagnetism, and antiferromagnetic are three more magnetic effects, albeit these forces are often so weak that they can only be observed with specialized laboratory equipment. Electric currents, like those utilised in electromagnets, and electric fields that change in time produce magnetic fields that surround magnetised things. Since a magnetic field's direction and strength can change depending on the location, it can be mathematically characterized by a function that assigns a vector to each point in space. This function is known as a vector field.
To know more about magnetic
https://brainly.com/question/8725370
#SPJ4
Part A What is the strength of the magnetic field at the center of the loop in the figure? (Figure 1) Express your answer to two significant figures and include the appropriate units.B= Value SubmitProblem 32.48 Assume that I=4.8A and d = 1.6cm.
The equation B=μ0I/2R, where R is the loop's radius, describes how strong the magnetic field is in the loop's center. The direction of the field with regard to the loop is provided by RHR-2. so, B= [tex]9.65097263\times10^{-6}[/tex]
The magnetic field strength is one of two metrics used to describe a magnetic field's intensity.
Technically, a difference is made between magnetic field strength H, measured in amperes per meter (A/m), and magnetic flux density B, commonly known as teslas, measured in Newton-meters per ampere (Nm/A) (T).
The magnetic field is depicted by magnetic field lines. The field strength and the density of the field lines are correlated.
The total number of magnetic field lines in a particular area is known as the magnetic flux.
B=[tex]=4\Pi \times 10^{-7}\times 4.8 \times 1.6[/tex]
B= [tex]9.65097263\times10^{-6}[/tex]
For such more question on magnetic field .
https://brainly.com/question/7802337
#SPJ4
on a far away planet, a 500 hz tuning fork is held over the open top of a glass pipe held vertically. the pipe is filled to the top with water then slowly drained until the air column inside it is in resonance with the vibrations of the tuning fork. when this first occurs the air column is 150 mm long. what is the speed of sound in the (closed) pipe?
The speed of sound in the pipe is 150m/s and that found to be enhanced when air column is 150 mm long.
What does "tuning fork" mean?
a two-pronged metal tool used for tuning musical instruments and determining standard pitch that produces a set tone when struck.
ΔL = 150mm => 0.15m = λ/2
=> λ = 2 x 0.15 => 0.3 m
The velocity of sound => frequency x wavelength
500hz x 0.3 m => 150m/s
Which tuning fork's frequency is higher?The length of a tuning fork's prongs determines the pitch it produces. Each fork has a stamp that says the note it makes (for example, A) and the frequency in Hertz (e.g. 440 Hz). Higher pitch (frequency) noises are produced by shorter prongs than by longer prongs.
Learn more about tuning fork here:
brainly.com/question/3472339
#SPJ4
31 Consider Earth to be stationary, and the Moon as orbiting Earth in a circle of radius R. If the masses of Earth and the Moon are Mg and MM respectively. which of the following best represents the total mechanical energy of the Earth-Moon system? (A s GM MM 2 R GMEM GMEM GM MM 2GMEMM (C)2R
2R is the best represents the total mechanical energy of the Earth-Moon system.
What term do you use instead of mechanically?The words automatic, impulsive, instinctual, and spontaneous are some typical substitutes to mechanical. While all of these terms refer to "doing or engaging without deliberate action," mechanical emphasizes how lifeless and frequently mechanical the response is. When mechanical may not be the best choice.
What does the term "technological thinking" mean?What does mechanical thinking entail? When pupils think mechanically, their brains just repeat thought loops without giving them any consideration. Children could automatically think, "I'm not strong at arithmetic," for instance. They simply remember it everytime they encounter a math problem.
Toral potential energy of earth and moon=-G*Me*Mm/R
Velocity of moon=sqrt(GMe/R)
Kinetic energy of moon=0.5*Mm*v^2=0.5*G*Me*Mm/R
Total energy=-GMe*Mm/2R
To know more about mechanical visit:
https://brainly.com/question/23561157
#SPJ4
A 10cm×10cm×10cm wood block with a density of 690 kg/m3 floats in water.
PART A
What is the distance from the top of the block to the water if the water is fresh?
PART B
If it's seawater? Suppose that rho=1030kg/m3.
Part A) The distance from the top of the block to the water if the water is fresh is 3 cm.
Part B) The distance from the top of the block to the sea water if the water is fresh is 3.31cm.
What does density mean in its simplest form?We refer to an object or substance's volume (or how much space it occupies) in terms of its density (its mass).
(a) The density of fresh water is ρwater = 1000 kg/m³
ΣF = 0
ΣF = - (ρwood)g(Vwood) + (ρwater)g(vwood)
- (ρwood)g(Vwood) + (ρwater)g(vwood) = 0
(vwood)/(Vwood) = (ρwood)/(ρwater)
(690×h)/(10×10×10) = (690)/(1000)
h = 6.9 cm
The block's top is above the water, and it is 10 - 6.9 = 3 cm
(b) The density of seawater is ρsea = 1030 kg/m³
(vwood)/(Vwood) = (ρwood)/(ρsea)
(690 × h')/(10 ×10 × 10) = (690)/(1030)
h' = 6.69 cm
The distance from the top of the block to the water is
10 - 6.69 = 3.31cm.
To know more about density visit:
https://brainly.com/question/2356214
#SPJ4
a 3.2-kg model rocket is launched, shooting 51.8 g of burned fuel from its exhaust at an average speed of 632 m/s. what is the speed of the rocket after the fuel has burned (ignore gravity and air resistance). answer: m/s
9.8 m/s will be speed of rocket after fuel has burned.
Let m1 be the mass of the rocket, m2 - the mass of burned fuel.
V1 - velocity of the rocket after the fuel has burned,
V2 - average velocity of burned fuel.
According to the law of conservation of linear momentum :
0 = m₁V₁ - m₂V₂
V₁ = V₂m₂/m₁
V₁ = 9.8 m/s
The conservation of linear momentum states that, within some problem domain, the amount of momentum remains constant; momentum is neither created nor destroyed, but only changed through the action of forces as described by Newton's laws of motion.
Learn more about linear momentum visit:
brainly.com/question/27988315
#SPJ4
he slope at a point on a position-versus-time graph of an object is the object's speed at that point:
the object's average velocity at that point:
the object's instantaneous velocity at that point:
the object's acceleration at that point:
the distance traveled by the object to that point.
Option a is Correct. An object's speed at a given moment is given by the slope at that point on a position-versus-time graph of the object: is the average speed of the object at that time:
The slope of location vs time is velocity. The velocity is constant if that slope does not change. The velocity is a negative constant if the slope is negative and stable.
The slope of velocity against time is acceleration. The slope of the line will be +4 m/s if the object is travelling at a velocity of +4 m/s. The slope of the line will be -8 m/s if the object is moving at a velocity of -8 m/s.
Learn more about slope Visit : brainly.com/question/3493733
#SPJ4
Correct Question:
The slope at a point on a position-versus-time graph of an object is the object's speed at that point:
a. the object's average velocity at that point:
b. the object's instantaneous velocity at that point:
c. the object's acceleration at that point:
d. the distance traveled by the object to that point.
a ball is released from rest from the twentieth of a building. after , the ball has fallen one such that it is directly outside the nineteenth- window. the are evenly spaced. assume air resistance is negligible. what is the number of the ball would fall in after it is released from the twentieth ?
A ball released from rest from the twentieth floor of a building, after 3 s falls 9 floors, considering they are evenly spaced.
A ball is released from rest from the twentieth floor of a building. It experiences a uniformly accelerated rectilinear motion. We can find the displacement after 1 s using the following kinematic equation.
To know more about ball released visit:
https://brainly.com/question/2018955
#SPJ4
an 82.0 g arrow is fired from a bow whose string exerts an average force of 95.0 n on the arrow over a distance of 80.0 cm. what is the speed of the arrow (in m/s) as it leaves the bow?
The speed of the arrow is 28.9 m/s. This can be calculated using the equation: V = (F x D) / m, where V is the speed, F is the force, D is the distance, and m is the mass. In this case, V = (95.0 N x 0.8 m) / 82.0 g = 28.9 m/s.
What is mass ?
Mass is a fundamental concept in physics that describes the amount of matter in an object or system. It is measured in terms of kilograms (kg) or other units such as pounds (lbs).
Mass is also used to measure the force of gravity, as well as the inertia of an object. In physics, mass is also used in the theory of relativity and in quantum mechanics. Mass is related to weight, which is the force of gravity acting on an object. Mass is different from weight because it is a measure of the amount of matter, while weight is a measure of the force of gravity on an object.
To learn about more mass
https://brainly.com/question/28021242
#SPJ4
what phenomenon occurs when light passes through a glass plate with parallel, microscopic grooves on it?
Diffraction is the phenomenon occurs when light passes through a glass plate with parallel, microscopic grooves on it.
When light travels through a diffraction grating, which is made up of numerous parallel slits that are evenly spaced apart, an intriguing thing happens. A very similar interference pattern to that produced by a double slit is produced.
A diffraction grating is an optical component that separates (disperse) light made up of a variety of wavelengths (such as white light) into its individual wavelength components. The most basic kind of grating has a lot of parallel slits that are widely separated from one another.
Diffraction gratings are optical components that split polychromatic light into its underlying constituent wavelengths in instruments like spectrometers.
To know more about diffraction click here
https://brainly.com/question/12290582
#SPJ4
A capacitance C and an inductance L are operated at the same angular frequency. A) At what angular frequency will they have the same reactance? Express your answer in terms of the variables C and L B)If L = 5.30 mH and C = 3.90 μF , what is the numerical value of the angular frequency in part A? C) What is the reactance of each element?
A) The angular frequency at which they will have the same reactance is equal to 1/√(LC).B) The numerical value of the angular frequency in part A is 8.51 x 10^6 rad/s.C) The reactance of each element is equal to 1/√(LC), which is equal to 5.91 kΩ.
What is the numerical ?
Numerical refers to a quantity that is expressed or represented by a number. It is a numerical value that can be used in mathematical equations and calculations. Numerical can also refer to a type of data that consists of numbers or numerical values, such as dates, times, measurements, or financial data.Numerical is a term used to describe data that is expressed in numerical form, such as numbers or numerical values. This type of data is used to make calculations and accuracy is important in order to make reliable predictions and decisions.
To learn more about numerical
https://brainly.com/question/24468862
#SPJ4
Select the correct answer. If the coefficient of static friction is 0.35 and the normal force is 80 newtons, what is the maximum frictional force of the surface acting on the object
The maximum frictional force of the surface acting on the object is greater than or equal to 28 N.
Given that,
Coefficient of static friction = 0.35
It is represented by μ.
Normal force = 80 N
Let us calculate the maximum frictional force of the surface exerted on the object.
The surface's frictional force is equal to the product of the static friction coefficient and the normal reaction.
Mathematically, f = μ N = 0.35 × 80 = 28 N
The answer is 28 N if the static friction coefficient mentioned in the question is equivalent to limiting friction.
The maximum frictional force exceeds 28 N if it is less than the coefficient of limiting friction.
To know more about frictional force:
https://brainly.com/question/3389350
#SPJ4
Which of the following changes would decrease the coefficient of friction needed for this rice? a. increasing the rider's mass b. increasing the radius of the rice c. increasing the speed of the ride d. increasing the acceleration due to gravity (taking the ride to another planet)
The correct answer is b. Increasing the radius of the rice would decrease the coefficient of friction needed for the ride, as a larger surface area would increase the area of contact between the rider and the ride, thus reducing the force of friction.
What is gravity?Gravity is a natural phenomenon by which all objects with mass are brought towards each other. It is most commonly observed as the attraction between objects with mass, such as the Earth and the Moon. This force of attraction is known as the force of gravity. Gravity also affects light and other particles, such as protons and neutrons. Gravity holds us to the ground and helps keep the planets in their orbits. It is the reason why objects fall to the ground and why we can’t easily fly off into space. Gravity is one of the fundamental forces of nature and is essential to understanding the universe.
Increasing the speed of the ride would increase the coefficient of friction needed, as it would increase the force of friction. Increasing the acceleration due to gravity would have no effect on the coefficient of friction needed for the ride.
To know more about gravity click-
https://brainly.com/question/940770
#SPJ4
when the outdoor emergency warning siren at cheryl's school was tested, the sound from the siren took 7.0 s to reach her house located 2.40 km from the school. what is the speed of sound in air?
According to question, The speed of sound in air is 342.85 m/s.
Define speed?the speed at which an object's location changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined. Since speed simply has a direction and no magnitude, it is a scalar quantity.Speed tells us how fast something or someone is travelling.
the solution is -
distance d = 2.4 km = 2400 m , time t = 7s
speed of sound = distance/time
speed of sound = 2400/7
speed of sound = 342.85 m/s
To know more about speed visit :
https://brainly.com/question/28484577
#SPJ4
4) a very elastic rubber ball is dropped from a certain height and hits the floor with a downward speed v. since it is so elastic, the ball bounces back with the same speed v going upward. which of the following statements about the bounce are correct? (there could be more than one correct choice.) a) the ball had the same momentum just before and just after the bounce. b) the magnitude of the ball's momentum was the same just before and just after the bounce. c) the ball's momentum was conserved during the bounce. d) none of the above statements are correct.
When dropped from a specific height, a very stretched rubber ball hits the ground quickly to the left. The elastic nature of the ball causes it to rebound with
What has Elastic been famous for?
Elasticsearch, the centerpiece of the Elastic Stack, a collection of free and open technologies for data intake, enrichment, storing, analysis, and visualization, is renowned for its straightforward REST APIs, decentralized nature, speed, and scalability.
Where can you find elastic?
Designed to feel soft on the skin, cord elastic is frequently used in clothes that doesn't need as much stretch as well as in jewelry making. It's a fantastic choice for doll clothing or baby garments because of its tiny size. Often, cord elastic is used.
To know more about elastic visit:
https://brainly.com/question/22810476
#SPJ4
Contain(s) an objective description of the murder victim.
The murder victim was a white male in his early thirties, approximately 5 feet 8 inches tall with a thin build and brown hair.
What is victim?A victim is a person who has been harmed, either physically or emotionally, as a result of another person's actions or inaction. Victims may suffer physical injuries, psychological trauma, and/or financial losses. Victims also experience feelings of powerlessness, fear, anxiety, and anger. Victims of crime often feel a deep sense of injustice, which may manifest in the form of post-traumatic stress disorder, depression, or other psychological distress. Victims may also experience social stigma, which can have a long-term impact on their lives. Victims of crime may also have difficulty accessing justice and finding support to help them cope. It is important for victims of crime to have access to a range of services that can provide them with appropriate assistance and support.
He was wearing a white t-shirt and jeans at the time of his death. He had several stab wounds to his torso and a deep cut to his throat.
To learn more about victim
https://brainly.com/question/29468778
#SPJ4
you have 9 balls. 1 is heavier than the other 8. using a balance scale, how would you identify the heaviest ball in as few steps as possible?
From the nine total balls, three groups of three balls each should be created. We compare the relative weight of the two groups. It should then be clear which group is heavier.
Because it will either tip the scales or keep them level. The group you excluded is then involved. The most common definition of weight in basic physics textbooks is the gravitational force exerted on a body. The formula W = mg, which stands for weight, object mass, and gravitational acceleration, is widely used to express this. Mass is a physics term for a quantitative measure of inertia, a fundamental property of all matter. It basically refers to the resistance a body of matter shows to a change in speed.
Learn more about mass here
https://brainly.com/question/18064917
#SPJ4
which of the following best respresents R= A - B?
PLEASE I NEED HELP ON THIS!!
Answer:
the right side one
Explanation:
a+b will go left
define astronomical unit. define astronomical unit. the average distance between earth and the sun, which is about 9.46 billion kilometers. the distance that light can travel in 1 year, which is approximately 149.6 billion kilometers. the average distance between the sun and neptune, which is approximately 4497 million kilometers. the average distance between earth and the sun, which is approximately 149.6 million kilometers. the distance that earth travels around the sun in 1 year, which is about 9.46 million kilometers.
However, it is around 93 million miles on average between Earth and the sun (150 million kilometers). This distance is also known as one astronomical unit by scientists (AU)
What does the term "astronomical" mean?
Astronomical: Extremely or unbelievable huge; of or connected to astronomy. The price was exorbitant. astronomically
What does astronomy mean exactly?
Like the other disciplines, astronomy too began as a -ology, although it was termed astrology. Astro-, which naturally meaning "star," is a prefix that both astrological and astronomy share. "Knowledge" or "science" are denoted by the prefix -ology.
To know more about astronomical visit:
https://brainly.com/question/5165144
#SPJ4
consider a planet where the pressure of the atmosphere at sea level is 2500 mmhg. does water behave in a way that can sustain life on the planet?
Water is the most significant and prevalent liquid on planet. There is no life without water. The region of the earth where liquid water is present is where life is found. Water exists as solid ice on other planets with pressures of 2500mmHg.
What are an example and the environment?The light you feel on your face, the wind that blows through your schoolyard and waves the flag, and even the clouds you see in the sky are all effects of the atmosphere of Earth. The atmosphere of Earth extends from the surface of the planet.
Which types of atmospheres are there?The four atmospheric layers that make up the Earth's atmosphere are called the troposphere, stratosphere, mesosphere, and thermosphere.
To know more about atmosphere visit:
https://brainly.com/question/26767532
#SPJ4
A cannon ball is launched horizontally from a cannon. the cannon is on the edge of a 50 m tall cliff. what is the acceleration of the cannon ball horizontally?
a 0
b not enough information
c 50 m/s2
d 9.8 m/s2
Answer:
a
Explanation:
The acceleration of the cannon ball horizontally is 0 m/s2, since it is already traveling at a constant velocity.
