Answer:
The value is [tex]k = 2 \ ppb[/tex]
Explanation:
From the question we are told that
The volume of the drinking water is [tex]V = 500 \ mL = 500 *10^{-3} \ L = 500 *10^{-6} \ m^3[/tex]
The mass of mercury it contains [tex]m_c = 0.001 \ mg = 0.001 *10^{-3} \ g = 0.001 *10^{-6}\ kg[/tex]
Generally the mass of water is mathematically represented as
[tex]m = V * \rho[/tex]
Here [tex]\rho[/tex] is the density of water with value [tex]\rho = 1000 \ kg/m^3[/tex]
So
[tex]m = 500 *10^{-6 }* 1000[/tex]
=> [tex]m = 0.5 \ kg[/tex]
Generally ppb mean part per billon , and 1 billon is 100,000,000
So the part per billon which this represents is mathematically represented as
[tex]k = \frac{0.001 *10^{-6}}{ 0.5} * 100 000 000[/tex]
=> [tex]k = 2 \ ppb[/tex]
Answer:
2 ppb
Explanation:
I got it right in class!
Hope this Helps!! :))
I need help help mee plea
the correct lewis dot structure for CaO?
Answer:
Here you go.
Explanation:
Hopefully it is not confusing.
What is formed when atoms of elements combine? (5 points)
оа
Compounds
Ob
Electrons
ос
Protons
Od
Neutrons
Answer:
Its compounds
Explanation:
Which statement best describes a primary occurrence in an uncontrolled fission reaction.
Incomplete question. Options;
A) Mass is created and energy is released.
B) Mass is created and energy is stored.
C) Mass is converted to energy, which is released.
D) Mass is converted to energy, which is stored.
Answer:
Mass is converted to energy, which is released
Explanation:
Basically, when uncontrolled nuclear fission (splitting) occurs, a radioactive atom (a mass) is split into two smaller nuclei leading to a continuous chain of fission reactions.
In other words, as the fission of the mass of the atom continues to occur, the mass is converted to energy, which is then released and more reactions occur.
How does the concept of action- reaction apply to the human body?
Answer:
The physical body of human work accosting to Action-Reaction law.
Explanation:
The rule of action-reaction state that an equivalent and reverse reaction occurs with any action. If one entity imposes force on a second entity, the second responds by exerting an equivalent force on first entity in the same direction.
If a cake recipe requires 25g of sugar, how much sugar will the baked cake contain
How many grams are in 4 moles of Calcium?
Answer:
160.32 grams of Ca or 160 if rounded
Explanation:
Multiply moles of Ca by the conversion factor (molar mass of calcium) 40.08 g Ca/ 1 mol Ca, which then allows the cancelation of moles, leaving grams of Ca.
4 mol*40.08g/mol = 160.32 grams of Ca
please give thanks by clicking heart button :)
Answer:
[tex]\boxed {\boxed {\sf 160.32 \ g, \ 160 \ g, \ or \ 200 \ g }}[/tex]
Explanation:
To convert from grams to moles, we must use calcium's molar mass, which can be found on the Periodic Table of Elements.
Calcium (Ca) Molar Mass: 40.08 g/molNow, we can use the molar mass as a ratio or fraction.
[tex]\frac{40.08 \ g \ Ca}{1 \ mol \ Ca}[/tex]
This fraction can be multiplied by the number of moles, which is 4.
[tex]4 \ mol \ Ca * \frac{40.08 \ g \ Ca}{1 \ mol \ Ca}[/tex]
When we multiply, the moles of calcium will cancel each other out.
[tex]4* \frac{40.08 \ g \ Ca}{1}[/tex]
Since the fraction is over 1, we can just remove the denominator and write a simply multiplication equation.
[tex]4* 40.08 \ g \ Ca[/tex]
[tex]160.32 \ g \ Ca[/tex]
Depending on the teacher's instructions, the answer can be left as is or rounded.
If we round to the technically correct number of significant figures, it would be 1, because the original measurement of 4 moles has 1 sig fig. This would 200 grams, but that's a large amount to round.
We could also round to the nearest whole number. The 3 in the tenth place tells us to leave the whole number as it is. This would be 160 grams.
The answer could be 160.32 grams, 160 grams, or 200 grams, depending on rounding and significant figures.
What happens when the dynamic equilibrium state of a system is disturbed by changing the conditions?
A. The position of the equilibrium shifts toward the reactants.
B. The equilibrium shifts to counteract that change.
C. The position of the equilibrium is maintained.
D. The equilibrium state is unable to reestablish.
Answer:
It covers changes to the position of equilibrium if you change concentration, pressure or temperature. ... If a dynamic equilibrium is disturbed by changing the conditions, the position of equilibrium moves to counteract the change
Explanation:
Scientists are always learning new things. Which of the following shows how
scientists use observations to gain new understanding about the world?
A. Scientists have discovered new planets orbiting a star by
detecting a wobble in the star's motion.
B. Scientists hope to learn more about how many stars are in space.
C. Scientists wonder if other planets can support life, and some
scientists wonder if there are aliens.
D. Scientists are familiar with some galaxies, but they do not know
how many galaxies exist.
Answer:
The answer is B
What is the electron configuration for Ti (titanium)?
Explanation:
Titanium is an element found in the d-block group on the periodic table. It is a transition element.
To write the electronic configuration of an element, we must know the number of electrons in them;
In a titanium atom, we have 22 electrons;
Shell notation = 2 8 10 2
Orbital notation = 1s² 2s² 2p⁶ 3s² 3p⁶ 3d² 4s²
Answer: [Ar]4s^2 3d^2
Explanation:
Identifies at least one organism
that goes through photosynthesis
or respiration
what is the average atomic mass of einsteinium? what are its common isotopes?
Answer:
Boom
Explanation:
The bomb is big and it goes boom and it also creates nuclear fragments everywhere
True or False:
All stars are the same color.
Answer:
False
Explanation:
They are not the same color since they do not all have the same temperature
Temperature defines their color
Of the elements Pt, V, Li, and Kr, which is a nonmetal?
About Salva Chapter 14
1.Why isn’t Nya happy when the borehole water starts flowing?
2.How much time has now passed since Salva fled from his school?
3.What was life like in the Kakuma and Ifo refugee camps?How did they compare?
4.What does Salva mean when he thinks,”It was hard to keep hope alive when there was so little to feed it?”
5.Where does Salva finally find this hope?
Answer:
Because it is muddy and dirty.9 yearsDreadful / Compared The Ifo and Kakuma camps: Isolated areasThere was no way Salva could ever reach his goal of branching out into the world if he was stuck at the camp.When he hears that 3000 boys will be chosen to go to America.Would this be point D or point E? (Picture)
*
When Gallium becomes an ion it loses 3 electrons to become:
A: -3
B: +3
C: It loses 3 electrons to become a neutral atom
D: It is already neutral
Answer:
B: +3
Explanation:
If Gallium loses 3 electrons, it will become an ion.
The ion will be positively charged because in this new ion, the number of electrons is lesser than the number of protons. The charge difference will impart a positive net charge on the ion.
In a neutral atom, the number of electrons and protons are the same. For positively charged ions, the number of protons is greater than the electronsIf Gallium the loss of 3 electrons offsets the charge balance in the chemical specie. Thus, the ion will have a net +3 charge.
PLEASE HELP ME, CHEMISTRY THANKS! :)
The density of water at 4.00°C is 0.967 g/mL. How many molecules of water are present in a 499.8 mL bottle of water? Express your answer to the correct number of significant figures. Be sure to show all steps completed to arrive at the answer.
Answer:
161.69×10²³ molecules
Explanation:
Given data:
Volume of water = 499.8 mL
Density of water = 0.967 g/mL
Number of molecules of water = ?
Solution:
First of all we will calculate the mass of water.
Density = mass/volume
0.967 g/mL = mass/499.8 mL
Mass = 0.967 g/mL × 499.8 mL
Mass = 483.3 g
Number of moles of water:
Number of moles = mass/molar mass
Number of moles = 483.30 g / 18 g/mol
Number of moles = 26.85 mol
1 mole contain 6.022×10²³ molecules
26.85 mol ×6.022×10²³ molecules / 1mol
161.69×10²³ molecules
Answer:
density of water at 4.00c is 0.967 g/mL. Volume of water=499.8mL
Mass of water=density x volume= 0.967 x 499.8=483.3066g
Number of moles of water molecules in given of water = givenmass/molarmass=483.3066/18=26.85
we know that 1 mole has 6.022 x 1023 molecules of water
so the number of water=6.022 x 1023 x 26.85=161.69 x 1023 =1.62 x 1025 molecules of water is its upto 3 significant figure.
Explanation:
What is the base name for the following compound?
C-C-C-C-C=0
Answer:
Ethanoic Acid
Explanation:
Elements that are most similarities are located in the same...?
Answer: In the same Group
Explanation: Elements in the same group (row going down) have the same number of valance electrons. These valance electrons dictate their chemical properties and how they react with other elements/compounds.
Fill in the coefficients that will balance the following reaction: (Note: Use 1 as coefficient where appropriate.) C3H7OH+O2-- CO2 +H2O
The balanced equation :
2C₃H₇OH+9O₂⇒ 6CO₂ +8H₂O
Further explanationGiven
The following reaction(combustion of Propanol) :
C₃H₇OH+O₂⇒ CO₂ +H₂O
Required
Balanced equation
Solution
Equalization of chemical reactions can be done using variables. Steps in equalizing the reaction equation:
• 1. gives a coefficient on substances involved in the equation of reaction such as a, b, or c, etc.
• 2. make an equation based on the similarity of the number of atoms where the number of atoms = coefficient × index (subscript) between reactant and product
• 3. Select the coefficient of the substance with the most complex chemical formula equal to 1
1. Give coefficient
C₃H₇OH+aO₂⇒ bCO₂ +cH₂O
2. Make an equation
C, left=3, right=b⇒b=3
H, left=8, right=2c⇒2c=8⇒c=4
O, left=1+2a, right=2b+c⇒1+2a=2b+c⇒1+2a=2.3+4⇒1+2a=10⇒2a=9⇒a=9/2
The equation becomes
C₃H₇OH+9/2O₂⇒ 3CO₂ +4H₂O x 2
2C₃H₇OH+9O₂⇒ 6CO₂ +8H₂O
ANSWER THIS QUESTION AS QUICK AS YOU CAN YOU WILL GET BRAINLY AND PIONTS PLEASE HELP ASAP!!!!!!!!!!!!!!!!!
Which of the following is NOT true about comparisons between analog and digital signals?
Question 3 options:
Digital signals are pulses of voltage that switch currents on an off in devices like computers.
Analog signals are used to convert sound waves into electronic signals.
Digital signals are more prone to distortion.
Analog signals are more prone to distortion.
Answer:
Explanation: Analog signal is continuous in nature as it is well defined for every specific time. More specifically, it is the one defined continuously for a range of values with time. These are represented as a sinusoidal waveform. The figure below represents an analog signal:
analog signal
As we can see here that the signal is continuous in nature as its every value is specified for each particular interval of time, thus, is referred as the continuous-time signal. For the purpose of recording the analog signals, the actual signal must be preserved as only in that case we can record the accurate analog signal.
However, whenever in any application there arises a need to change an analog signal into a digital one then through sampling this can be achieved. In the sampling technique, this signal is sampled at certain fixed time intervals and the sampled voltage is converted into digital values.
Definition of Digital Signal
A type of signal which is non-continuous in nature as it is defined only for a set of discrete times is known as a digital signal. More simply, we can say, it is specified at some particular time instants only. Thus, here the information is represented as a set of discrete values. The figure given below shows the signal representation in digital form:
digital signal
Here it is clear that the data is discretely positioned in time axis thus is shown in the form of bits i.e., 0 and 1. This means that here the signal performs the sudden transition between 0 and 1 where these two values correspond to the two voltage levels. For the purpose of recording the signals, in the digital one, only the samples of the actual signal are taken and not the whole signal.
Key Differences Between Analog and Digital Signal
Analog and digital signals are differentiated mainly on the basis of their way to carry the information. Analog signals represent the information as a continuous function of time. As against, digital signals are represented discretely at specific time intervals.
Analog signals deteriorate more easily than digital one as their susceptibility towards noise is higher.
The devices that operate on an analog signal need more power for transmission and reception than the devices that work on the digital signal.
The information represented by the analog signal is comparatively more accurate than the digital signal due to its continuous range of values.
Analog signals are transmitted at a slower rate than digital signals as the information holds more values thus is precise.
An analog signal is defined by the amplitude, phase, frequency, etc. While the digital signal is mainly associated with bit rate, bit intervals, etc.
The sinusoidal representation of the analog signal makes it difficult to understand or get decoded thus encryption is not required in analog signals. But as the digital signals are in the form of square waves, thus, it can be decoded easily hence need to be encrypted for secured communication.
On the basis of processing, it is said that the continuous nature of the signal offers easy processing of the analog signal. However, the discrete nature of the signal offers difficultly in the processing of the digital signal.
Conclusion
Thus, the above discussion concludes that due to the way of representing the signal, the two are differentiated. And because of this, the two types of signals possess different properties and are used in different applications. Like analog signals are used in radio wave transmission and reception whereas digital signals are used in the field of digital electronics.
What is potential energy?
Answer:
the energy possessed by a body by virtue of its position relative to others, stresses within itself, electric charge, and other factors.
Explanation:
In physics, potential energy is the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors.
Can someone help me
Answer:
The longer it takes to orbit the sun.
Explanation:
On the graph, which dimension would be changed if the rate of reaction were to be altered by a catalyst?
Answer:
The alteration of the rate of the chemical reaction by the addition of a catalyst will change the dimension of L
Explanation:
The parts of the Energy profile of a reaction diagram the given letters represent are;
K = The energy possessed by the reactants
L = Activation energy required for the reaction to take place
M = Energy threshold required for the reaction to take place
N = The change in the enthalpy from the reactants to the products, which is also the energy released
O = The energy possessed by the products
The addition of a catalyst changes the route with which the reaction takes place such that the reaction rate is increased because the activation energy, L, is reduced.
Therefore, the dimension that will be changed if the rate of reaction were to be altered by a catalyst is L.
solid to liquid change melting
Answer:
The process of a solid becoming a liquid is called melting. (an older term that you may see sometimes is fusion). The opposite process, a liquid becoming a solid, is called solidification. For any pure substance, the temperature at which melting occurs—known as the melting point—is a characteristic of that substance.
Hope this helps, have a wonderful day/night, stay safe, happy holidays, and merry christmas!
How much thermal energy must be added to a 87.5 g sample of ice at -25oC completely melt the entire sample? As part of your work, sketch a labelled heating curve. Circle the portion of the curve that is the focus of this question.
Answer:
4.6 kJ
Explanation:
The energy required to raise the temperature of a substance from its initial temperature to a final temperature is given by:
Q = mcΔT
Where Q = energy, c = specific heat capacity of substance and ΔT = final temperature - initial temperature
Given that:
c = 2.1 kJ/kg°C, m = 87.5 = 0.0875 kg, ΔT = final temperature - initial temperature = 0 - (-25) = 25
Q = 0.0875 * 2.1 *25
Q = 4.6 kJ
Help ASAP ......begdhzhshs
Answer:
thunderstorms
Explanation:
19.5 g O2 is equal to how many moles of O2? _____moles O2
Explanation:
Molar mass of O2: 32g/mol
Moles of O2 = 19.5 / 32 = 0.609mol
what happen if carbon is heated with oxygen?
what happens if magnesium is burnt in oxygen?
what happens if iron is heated with oxygen?
Answer:
abc
Explanation:
