To determine the solution of the question, we can divide the total number of tangerines, which is 168, by the number of boxes, which is 9. When we perform this division, we get 18, with a remainder of 6 as the number of tangerines that can be placed in each box.
To understand the answer better, let's go through an explanation of the same. Since the division of 168 by 9 leaves us with a remainder of 6 and a quotient of 18, it implies that 9 boxes shall contain 18 tangerines in each of them and 6 tangerines are leftover after the distribution.
Therefore, the farmer can distribute his 168 tangerines in numbers of 18 in each of the 9 boxes and be left with 6 tangerines.
To know more about tangerines, visit:
https://brainly.com/question/258913
#SPJ11
Identify coordinate point c.
(0, 2)
(1, 5)
(6, 7)
(7, 3)
Answer:
The coordinate point "c" is (6, 7). if start with ABCD which is rectangle
Step-by-step explanation:
What resistance R must be connected in series with a 200-mH inductor and a capacitor of the resulting RLC oscillating circuit is to decay to of its initial value of charge in 50 cycles
In order for the RLC oscillating circuit to decay to 1/10th of its initial value of charge in 50 cycles, a certain resistance (R) needs to be connected in series with a 200-mH inductor and a capacitor.
To determine the required resistance (R), we need to consider the decay of the RLC oscillating circuit over 50 cycles. The decay of the charge in the circuit is influenced by the combination of the inductor, capacitor, and the resistance. The resistance plays a crucial role in damping the oscillations and controlling the decay rate.
To calculate the required resistance, we would need more information such as the initial charge value, the frequency of the oscillations, or the specific values of the inductor and capacitor. Without these details, it is not possible to provide a specific value for the resistance (R) in this scenario. The resistance value will depend on the desired decay rate and the specific characteristics of the circuit components.
Learn more about RLC oscillating circuit here:
https://brainly.com/question/14582661
#SPJ11
the length (in km) of a random sample of new zealand (nz) rivers that travel to the pacific ocean and the lengths (in km) of a random sample of new zealand rivers that travel to the tasman sea are given in the table below. do the data provide enough evidence to show on average that the rivers that travel to the pacific ocean are longer than the rivers that travel to the tasman sea?
The data provide enough evidence to show on average that the rivers that travel to the Pacific Ocean are longer than the rivers that travel to the Tasman Sea.
How to calculate the valueThe test statistic is:
t = (209 - 76) / (™(19 * 78.95² + 22 * 33.29²))
= 3.263
The p-value is:
p-value = 0.0024
Since the p-value is less than 0.05, we reject the null hypothesis. This means that there is sufficient evidence to conclude that the mean length of the rivers that travel to the Pacific Ocean is greater than the mean length of the rivers that travel to the Tasman Sea.
Learn more about statistic on
https://brainly.com/question/15525560
#SPJ1
The rate of interest that you are paying on a mortgage loan is 6.5 per cent per year. Inflation is running at 3 per cent per year. The real rate of interest that you are paying is therefore: Group of answer choices 6.5 9.5 3 3.5
The real rate of interest that you are paying is 3.5%.
The rate of interest, often referred to as the interest rate, is the percentage or proportion of the principal amount that is charged or earned over a certain period of time. It represents the cost of borrowing money or the return on investment. The rate of interest is typically expressed as an annual percentage, but it can also be calculated for shorter or longer time periods depending on the context.
The real rate of interest is calculated by subtracting the inflation rate from the nominal interest rate. In this case, the nominal interest rate is 6.5% per year, and the inflation rate is 3% per year.
Real Rate of Interest = Nominal Interest Rate - Inflation Rate
Real Rate of Interest = 6.5% - 3%
Real Rate of Interest = 3.5%
Therefore, the real rate of interest that you are paying is 3.5%.
Learn more about the rate of interest at:
https://brainly.com/question/25720319
#SPJ4
Cuando el papa de julio se fue a comprar un pantalon vaquero vio que estaban clasificados por ancho y largo y pidio uno de 32 por 34 pulgadas, ya que es muy alto de hecho jugo basquetbol ya que mide 5 pies con nueve pulgadas pero un compañero de equipo el mas alto media 6 pies y tres pulgadas si hay 12 pulgadas en un pie ¿de cuanto es la diferencia de estatura del papa de julio y el jugador mas alto en el equipo de basquetbol
Answer:65
Step-by-step explanation: 35x43
g In addition to paternity testing, DNA testing is now used legally in many civil and criminal cases. In what kinds of cases other than parentage could the presence of chimerism cause problems
Chimerism, the presence of two or more distinct sets of DNA within an individual, can cause problems in cases other than parentage, such as forensic investigations and identification in criminal investigations.
In forensic investigations, chimerism can complicate DNA profiling and identification processes, as it may result in mixed DNA profiles that make it challenging to determine an individual's true genetic identity. This can create difficulties in accurately linking suspects to crime scenes or identifying victims.
In transplant compatibility assessments, chimerism can lead to inconclusive results when determining whether a potential donor's DNA matches the recipient's DNA. The presence of two or more sets of DNA may affect the reliability of compatibility tests, potentially impacting the success of organ or tissue transplants.
In criminal investigations, chimerism can raise issues when DNA evidence is used to establish a suspect's presence at a crime scene. The presence of multiple DNA profiles within an individual may create doubt or confusion when attempting to match DNA evidence to a specific person, potentially affecting the outcome of criminal cases.
In summary, chimerism can cause problems in forensic investigations, transplant compatibility assessments, and criminal investigations by introducing complexities and uncertainties into DNA profiling and identification processes.
Learn more about tissue transplant here:
https://brainly.com/question/30154469
#SPJ11
In ratio analysis, a single value has little meaning. Therefore analysts use trend and comparative analyses to help "interpret the numbers." T/F
True, analysts use trend and comparative analyses to help "interpret the numbers.
What is Ratio Analysis?
a) Ratio analysis is a financial analysis tool that helps to evaluate the financial performance and health of a business by comparing different financial figures
b) There are three categories of ratios in ratio analysis: liquidity ratios, profitability ratios, and solvency ratios.
c) Ratio analysis is important because it helps to provide a quick snapshot of a company's financial health and performance.
In ratio analysis, a single value may not provide sufficient context or insight into a company's financial performance.
To draw meaningful conclusions, analysts use trend and comparative analysis to effectively interpret numbers.
Trend analysis involves examining financial ratios over multiple periods to identify patterns and determine whether performance is improving, deteriorating, or remaining stable over time.
This helps identify potential trends or anomalies that may affect decision making. Benchmarking, on the other hand, involves comparing a company's ratios to industry standards, competitor performance, or historical data to assess its relative performance and identify areas of strength or weakness.
By comparing ratios over different time periods or with external benchmarks, analysts gain a more comprehensive picture of a company's financial health and can make more informed judgments and recommendations.
Trend and comparative analyzes are therefore essential tools for analysts to effectively interpret ratio analysis and gain valuable insights into a company's financial performance.
To learn more about Ratio Analysis from the given link
https://brainly.com/question/31361998
#SPJ4
please answer number 4
3. D 49° B mzB = ? 70° d = 18 C length of arc CD = length of are BD =
The measure of <B is 61 degree.
length of arc CD = 20.859 unit and length of are BD = 22.4118 unit.
First, using Angle sum property in triangle DCB
<D + <C + <B = 180
49 + 70 + <B= 180
<B = 180 - 119
<B = 61 degree
Now, using sine law
CB / sin 49 = BD / sin 70
18 / 0.75470958022 = BD / 0.93969262078
BD = 22.4118
and, 18 / 0.75470958022 = CD / 0.87461970713
CD = 20.859
Learn more about Sine law here:
https://brainly.com/question/13098194
#SPJ1
which is the priority nursing action for a child with severe burns on the arms who is scheduled for therapeutic escharotomy
The priority nursing action for a child with severe burns on the arms who is scheduled for therapeutic escharotomy is to ensure airway patency and stability.
When a child with severe burns on the arms is scheduled for therapeutic escharotomy, ensuring airway patency and stability takes precedence as the priority nursing action. Severe burns can cause swelling and inflammation, which may compromise the child's airway. Therefore, the nurse must assess the child's respiratory status, monitor for signs of respiratory distress, and intervene promptly if any airway compromise is detected.
The nurse should closely observe the child for signs of respiratory distress, such as increased rate of breathing, decreased oxygen saturation, cyanosis, or altered mental status. In case of airway obstruction or compromise, immediate interventions like repositioning, providing supplemental oxygen, or performing an emergency airway management procedure should be initiated.
Learn more about rate here:
https://brainly.com/question/13324776
#SPJ11
For which of these research situations would you calculate an F-ratio? a. independent variable = ounces of alcohol consumed dependent variable = reaction time in milliseconds b. independent variable = study environment dependent variable = test score c. independent variable = college major dependent variable = political affiliation d. independent variable = age dependent variable = miles driven per week
The correct answer is b. independent variable = study environment,
dependent variable = test score
In which research situation(s) would the F-ratio be applicable, and how is it calculated?The F-ratio is applicable in research situations involving analysis of variance (ANOVA) or comparing the means of multiple groups. It quantifies the variability between groups compared to the variability within groups. To calculate the F-ratio, one needs to determine the mean square values by dividing the sum of squares by the respective degrees of freedom, and then compute the ratio of the mean square between groups to the mean square within groups.
The F-ratio is typically calculated for situations involving analysis of variance (ANOVA) or comparing the means of multiple groups. In the given research situations, the F-ratio would be calculated for:
b. independent variable = study environment,
dependent variable = test score
For this scenario, if there are multiple study environments (e.g., different classrooms, online vs. in-person), and the researcher wants to determine if there are any significant differences in test scores across these environments, an ANOVA test can be conducted to calculate the F-ratio. This test compares the variability between the groups (study environments) with the variability within the groups to determine if there are significant differences in the mean test scores.
The other research situations mentioned (a, c, and d) involve independent variables with a single category or continuous dependent variables, which do not require calculating an F-ratio for their analysis.
To learn more about the F-ratio from the given link
brainly.com/question/29537928
#SPJ4
Use the Pythagorean Theorem to find the missing side of a right triangle who has one leg 5 and a hypotenuse of 9. If your answer has a square root in it, write it like such: 2 radical 5.
Answer:
Step-by-step explanation:
Mason made his father a quilt. the width is 9
4 5 ft and the length is 5 3 4 ft. what is the area of the quilt? solve on paper. then check your work on zearn.
The area of the quilt is 1127/20 square feet. This can also be written as a mixed number, which would be 56 7/20 square feet.
To find the area of the quilt, we need to multiply the width by the length. Let's calculate it step by step:
Width: 9 4/5 ft. We can convert the mixed number to an improper fraction by multiplying the whole number (9) by the denominator (5) and adding the numerator (4). Then we divide the result by the denominator.
9 * 5 = 45. 45 + 4 = 49.
So, the width is 49/5 ft.
Length: 5 3/4 ft. We can convert the mixed number to an improper fraction using the same method.
5 * 4 = 20. 20 + 3 = 23.
So, the length is 23/4 ft.
Now, we can calculate the area:
Area = Width * Length.
Area = (49/5 ft) * (23/4 ft).
To multiply fractions, we multiply the numerators together and the denominators together:
Area = (49 * 23) / (5 * 4) ft².
Area = 1127/20 ft².
For more such questions on area
https://brainly.com/question/25292087
#SPJ4
aking into account identical letters, how many ways are there to arrange the word PARVAMONSTRA that both begin and end with consonants? (consonants are the non-vowel letters. In this word the consonants are R, P,V, M, N, S, and T)
There are 2,520 ways to arrange the word "PARVAMONSTRA" such that it begins and ends with consonants.
To arrive at this number, we need to consider the arrangement of the consonants at the beginning and end, as well as the arrangement of the remaining letters in the middle.
To determine the arrangement of the consonants at the beginning and end, we have 7 consonants to choose from.
Since the first and last letters must be consonants, we have 7 choices for the first letter and 6 choices for the last letter.
For the middle letters, we have 10 letters in total (including the remaining consonants and vowels). However, since some of these letters are repeated, we need to account for the repeated letters.
In "PARVAMONSTRA," the letters A and R are repeated twice. Therefore, we have 10!/(2!2!) ways to arrange the middle letters.
Multiplying the choices for the first and last letters (7 * 6) and the number of ways to arrange the middle letters (10!/(2!2!)), we get a total of 2,520 ways to arrange the word "PARVAMONSTRA" with consonants at both the beginning and end.
Therefore, there are 2,520 different ways to arrange the word "PARVAMONSTRA" such that it starts and ends with consonants, taking into account the repetition of the letters A and R.
To know more about consonants, visit:
https://brainly.com/question/1390341
#SPJ11
A triangle has sides with lengths of 4 yards, 6 yards, and 7 yards. Is it a right triangle?
According to Kirkpatrick's (1976) taxonomy of training criteria, _____ criteria are the training criteria MOST closely linked to transfer of training.
According to Kirkpatrick's (1976) taxonomy of training criteria, the answer is d. Behavior criteria.
Kirkpatrick's taxonomy of training evaluation consists of four levels:
1. Reaction: This level focuses on participants' immediate reactions and feedback to the training program.
2. Learning: This level assesses the extent to which participants have acquired new knowledge, skills, or attitudes as a result of the training.
3. Behavior: This level examines the transfer of learning from the training program to actual job behavior and performance.
4. Results: This level evaluates the broader organizational impact and results achieved as a result of the training.
Among these levels, the behavior criteria are the ones most closely linked to the transfer of training. Behavior criteria assess whether participants have successfully applied the acquired knowledge and skills in their actual work environment. It measures the extent to which the desired changes in behavior and performance have occurred as a result of the training. By evaluating behavior criteria, organizations can determine whether the training program has effectively translated into practical application and whether the newly acquired skills and behaviors are being utilized on the job. This level of evaluation is critical in assessing the effectiveness and transferability of training to real-world situations.
To know more about Kirkpatrick's taxonomy of training criteria, click here: brainly.com/question/31606050
#SPJ11
an ambulance station is located 30 miles from one end of a 100-mile road. the station services accidents along the entire road. suppose that an accident occurs. suppose that suppose accidents occur with uniform distribution along the road and suppose that the ambulance travels 60 miles per hour. let t be the amount of time it takes the ambulance to arrive at the sence with the assumption that the ambulance leaves the station right after the accident occurs. find the distribution function ft(t) and the density function ft(t)
The distribution function F(t) is F(t) = 3t/5 for 0 ≤ t ≤ 100/60. The density function f(t) is f(t) = 3/5 for 0 ≤ t ≤ 100/60.
Let X be the distance from the ambulance station to the accident location. Since accidents occur uniformly along the road, X follows a uniform distribution on the interval [0, 100]. The probability density function (pdf) of X is f(x) = 1/100 for 0 ≤ x ≤ 100.
The time it takes the ambulance to arrive at the scene, denoted by T, can be calculated as T = X/60, where the ambulance speed is 60 miles per hour.
F(t) = P(T ≤ t) = P(X/60 ≤ t) = P(X ≤ 60t) = ∫[0, 60t] f(x) dx
Since f(x) is a constant within the interval [0, 100], we can evaluate the integral as:
F(t) = ∫[0, 60t] f(x) dx = (60t - 0) * (1/100) = 3t/5
Therefore, the distribution function F(t) is given by F(t) = 3t/5 for 0 ≤ t ≤ 100/60.
To find the density function f(t), we can differentiate the distribution function F(t) with respect to t:
f(t) = dF(t)/dt = 3/5
Therefore, the density function f(t) is a constant 3/5 for 0 ≤ t ≤ 100/60.
Learn more about distribution function here:
https://brainly.com/question/30402457
#SPJ11
HELP ASAP!!! WILL MARK BRAINLIEST!!!
Find the domain restrictions from both the right & left sides of the equation.
The domain restriction for the right side of the equation is
x not equal to 0The domain restriction for the left side of the equation is
x not equal to 12What is domain?In mathematics, the domain refers to the set of all possible input values for a function. it is the collection of values for which the function is defined and can be evaluated.
The domain is typically represented by the variable x and determines the valid input values that can be plugged into the function to obtain meaningful outputs or results.
To get a possible value for 8/x, x should not be equal to 0, otherwise we get undefined
To get a possible value for 8/(12 - x), x should not be equal to 12, otherwise we get undefined
8/0 is undefined
Learn more about domain restriction at
https://brainly.com/question/31280397
#SPJ1
james scored 182 points while playing a video game. he scored 7 times as many points as jada many points did jada score?
By solving the equation, we conclude that Jada scored approximately 26 points in the video game.
What is equation?
An equation is a mathematical statement that indicates the equality of two expressions. It consists of mathematical symbols, variables, constants, and mathematical operations such as addition, subtraction, multiplication, division, and exponentiation.
To find out how many points Jada scored, we need to divide James' score by the factor by which James outscored Jada.
Given that James scored 182 points and he scored 7 times as many points as Jada, we can set up the following equation:
James' score = Jada's score * 7
182 = Jada's score * 7
To find Jada's score, we can divide both sides of the equation by 7:
182 / 7 = Jada's score
Jada's score ≈ 26
Therefore, Jada scored approximately 26 points in the video game.
To learn more about equation visit:
https://brainly.com/question/29174899
#SPJ4
what would expect to happened to the coefficient on weight if you re-estimated the above regression using your sample of 200 cars models?
i need help immediately, im giving out twenty point for help
Answer:
250x +425y ≤ 5900the truck will be overloadedStep-by-step explanation:
You want an inequality relating the number of 250 lb refrigerators (x) and the number of 425 lb pianos (y) a truck with a 5900 lb load limit can carry. And you want to know if 12 refrigerators and 8 pianos will overload the truck.
LoadThe weight of x refrigerators will be 250x. The weight of y pianos will be 425y. Then the restriction on the total weight is ...
250x +425y ≤ 5900 . . . . . . the load limit of the truck
OverloadThe weight of 12 refrigerators and 8 pianos will be ...
250·12 +425·8 = 3000 +3400 = 6400 . . . . pounds
This weight will overload the truck.
__
Additional comment
The graph shows the point (12, 8) is not in the solution space of the inequality. Hence the truck will be overloaded with that load.
<95141404393>
Please see attached image.
Answer:
Step-by-step explanation:
its easu
(You only have to answer the second one)
Answer:
35.6 minutes
Step-by-step explanation:
The average (aka mean) of a set of values is defined as the sum of the values divided by the total number of values.
Step 1: Find sum of values:
According to the dot plot: person talked 0 minutes
1 person talked 0 minutes,2 people talked 10 minutes2 people talked 20 minutes,4 people talked 30 minutes,3 people talked 50 minutes,and 4 people talked 60 minutes,Now we can find the sum using addition and multiplication:
Sum = (1 * 0) + (2 * 10) + (2 * 20) + (4 * 30) + (3 * 50) + (4 * 60)
Sum = 0 + 20 + 40 + 120 + 150 + 240
Sum = 570
Step 2: Find the total number of values present.
To find the total number of values, we add up the total number of people present:
Total = 1 + 2 + 2 + 4 + 3 + 4
Total = 16
Step 3: Determine average by dividing sum of values by total number of values. Then round to the nearest tenth:
Average = 570 / 16
Average = 35.625
Average = 35.6
Thus, the average number of minutes spent talking on a cell phone was about 35.6 minutes
__________ is a statistical method that utilizes many separate correlations in order to determine which variables change in concert and thus can be considered functionally related.
The statistical method that utilizes many separate correlations to determine which variables change in concert and can be considered functionally related is called 'principal component analysis' (PCA).
PCA is a technique used to identify patterns and relationships in multivariate data.
PCA aims to transform a set of possibly correlated variables into a smaller set of uncorrelated variables called principal components.
These components are linear combinations of the original variables and are ordered in such a way,
That the first component captures the maximum variance in the data,
The second component captures the maximum remaining variance orthogonal to the first component and so on.
By analyzing the correlations among the original variables,
PCA identifies the variables that change in concert and can be considered functionally related.
The variables that contribute most to each principal component are the ones that exhibit high correlations with each other.
And low correlations with variables in other components.
PCA helps to reveal underlying structure or dimensions in data, making it easier to interpret and understand relationships between variables.
Therefore, principal component analysis (PCA) is a statistical method that utilizes correlations among variables to identify which variables change in concert .
Learn more about statistical method here
brainly.com/question/30652356
#SPJ4
.2 The graph shows a journey that Denver and his father made to Johannesburg. They arrived in Johannesburg at 12:00. 2.2.1 2.2.2 2.2.3 2.2.4 Distance in km 250 200 150 100 50- 0 07:00 08:00 Journey to Johannesburg 09:00 10:00 Time in hours At what time did they start their journey? How many times did they stop along the road? 11:00 At what time between 9:00 and 12:00 did they stop? How far did they travel to Johannesburg? 12:00 13:00 4 (1) (1) э (1)
The average speed of the train during the journey is 35 km/hour.
a) The train leave city A at 5 AM.
b) By 12 noon the train cover a distance of 200 km.
c) By 1 pm the train travelled 250 km.
d) The speed of the train during 1 pm and 3 pm is 100/2 = 50 km/hour
e) The average speed of the train during the journey = 350/10
= 35 km/hour
f) The number of hours trains spend at rest is 3 hours.
Therefore, the average speed of the train during the journey is 35 km/hour.
Learn more about the average speed here:
brainly.com/question/9834403.
#SPJ1
8. Alice Corporations has two divisions. The one in the high-risk industry has a beta of 1.5 and can be financed optimally in line with others in the industry at 25% debt and 75% equity. The low risk division has a beta of .8 and based on industry averages, can be financed optimally at 50% debt and 50% equity. Assuming the risk-free rate of return on 10-year government securities is 2.7% and the market risk premium is 5%. What is the estimated cost of common equity for the high-risk division
The estimated cost of common equity for the high-risk division of Alice Corporations can be calculated using the Capital Asset Pricing Model (CAPM). Hence, the estimated cost of common equity for the high-risk division is 10.2%.
The Capital Asset Pricing Model (CAPM) is commonly used to estimate the cost of equity. It is based on the relationship between the expected return on an investment and its systematic risk (measured by beta). The formula for estimating the cost of equity using CAPM is as follows:
Cost of Equity = Risk-Free Rate + Beta * Market Risk Premium
Since the high-risk division can be financed optimally in line with others in the industry at 25% debt and 75% equity, we can assume that the beta for the division represents the weighted average of the industry's beta. Therefore, the estimated beta for the high-risk division is 1.5.
Plugging in the values into the CAPM formula:
Cost of Equity = 2.7% + 1.5 * 5%
= 2.7% + 7.5%
= 10.2%
Hence, the estimated cost of common equity for the high-risk division is 10.2%. This represents the expected return on equity based on the risk profile of the division as measured by its beta and the overall market conditions.
Learn more about Capital Asset Pricing Model here:
https://brainly.com/question/32230922
#SPJ11
The pressure in an ideal gas is cut in half slowly, while being kept in a container with rigid walls. In the process, 495 kJ of heat left the gas. Part A How much work was done during this process
During the process in which the pressure of an ideal gas is cut in half slowly while being kept in a container with rigid walls, 495 kJ of heat leaves the gas.
According to the First Law of Thermodynamics, the change in internal energy (ΔU) of a system is equal to the heat (Q) added to or removed from the system minus the work (W) done by the system: ΔU = Q - W.
In this case, the heat leaving the gas is given as 495 kJ, and since the process is done slowly, we can assume it is reversible, meaning no energy is lost as non-mechanical work.
Therefore, the change in internal energy (ΔU) is equal to zero.
Since ΔU = Q - W and ΔU = 0, we can rearrange the equation to solve for the work done: W = Q.
Thus, the work done during this process is equal to the amount of heat leaving the gas, which is 495 kJ.
Therefore, the work done during the process in which the pressure of the ideal gas is cut in half slowly while being kept in a container with rigid walls is 495 kJ.
Learn more about First Law of Thermodynamics here:
https://brainly.com/question/31275352
#SPJ11
IM LOOKING FOR THE INEQUALITY. PLEASE HELP ANSWER FOR “Y” 20 POINTS IMMEDIATELY.
Answer:
Step-by-step explanation:
In which quadrant does the point (16 , -2) lie?
Answer:
4th quadrant
Step-by-step explanation:
If you were to imagine a quadrant plane you would see a plus. Quadrant one is two positives. Quadrant two is one negative and then one positive. Quadrant 3 is two negatives. So, its quadrant 4 because it is one positive and one negative.
Leeann was telling her friend about a movie with her favorite actor. She wanted her friend to guess his name so she gave her friend the first initial to his first and last name. Leeann provided a __________ for her friend
Leeann provided a clue or hint for her friend to guess the name of her favorite actor.
By giving the first initial of both the first and last name, she offered a partial but crucial piece of information to narrow down the possibilities. This clue could be seen as a form of "initialism" or "initial hint."
Using initials to represent names or words is a common practice to create puzzles, riddles, or guessing games.
In this case, Leeann employed the initial hint strategy to engage her friend in a guessing game, making it more fun and challenging.
By providing the first initials, Leeann ensured that her friend had a starting point and could begin narrowing down the list of potential actors.
By not revealing the full names, Leeann added an element of suspense and intrigue to the conversation.
This approach encouraged her friend to think creatively, consider different options, and ultimately engage in an interactive and entertaining exchange.
The use of a partial clue not only sparked curiosity but also allowed Leeann's friend to actively participate in the guessing process, making it a shared experience between the two friends.
To know more about partial clue, visit:
https://brainly.com/question/23425407
#SPJ11
