A rectangular window is 36 inces and 24 wide. Martina would like to buy a screen for the window. The cost of the screen is based on the number of square feet the screen is. Use the facts to find the area of the window in square feet.

The length seen in the miscroscope is 3.3 inches

From the question, we have the following parameters that can be used in our computation:

Scale factor = 10

Object length = 0.33 in

This means that the length of the object seen through the microscope is 10 times the actual length.

So, we have

Length = 10 * Actual length

The actual length is 0.33 inches, so the length seen through the microscope is:

Length = 10 * 0.33

Length = 3,3

Hence, it would appear to be 3.3 inches long when viewed through Sam's microscope.

Read more about dilation at

https://brainly.com/question/15891755

#SPJ1

A U.S. dollar bill is approximately 6.14 inches (15.6 cm) long, 2.61 inches (6.6 cm) wide, and 0.0043 inches (0.11 mm) thick.

A United States dollar bill is a rectangular piece of paper currency that is approximately 6.14 inches (15.6 cm) long, 2.61 inches (6.6 cm) wide, and 0.0043 inches (0.11 mm) thick. It is standardized by the U.S. government and has a green and black design featuring images of historical figures such as George Washington and Benjamin Franklin.

The front of the bill displays a portrait of a U.S. president, while the back showcases symbols and images related to U.S. history and culture. The U.S. dollar bill is the most widely used form of currency in the world and is accepted as a means of payment in many countries outside the United States.

Learn more about U.S. dollar bill:

https://brainly.com/question/17313224

#SPJ4

The mode would remain the same because 24 is already a part of the set.

Mode is a measure of central tendency, or an average, in a set of numerical data. It is the most frequently occurring value in a set of data.

For example, consider the following set of numbers: 1, 2, 2, 3, 3, 3, 4, 4, 5. In this set, 3 is the mode since it appears most often. It occurs three times, while the other numbers occur fewer times.

Mode can be used with both continuous and discrete data. Continuous data can be divided into classes, and the mode is the most frequent class. For example, if the numbers above were in the following classes: 1-2, 3-4, 5-6, then 3-4 would be the mode since it occurs the most often.

Mode can also be used with categorical data. In this case, the mode is the most frequent category.

For example, if the data set consists of the categories blue, green, and red, and blue occurs most often, then blue is the mode.

24 is the most frequently occurring number in the set of 24, 58, 24, 24 53. So it is the mode. It appears 3 times, which is more than any other number.

To know more about Mode, visit:

https://brainly.com/question/27951780

#SPJ1

Answer:

Expression: 7(-6 1/8)

Product: -42 7/8

Step-by-step explanation:

7/1×−49/8 =

−343/8 =

−42 7/8

The Evaluate the expression (12)2•(3•5−3)+13 is [tex]{7\frac{1}{2}[/tex]

Multiply the numerator by the reciprocal of the denominator:

[tex]5(\frac{3}{2} )[/tex]

Multiply [tex]5(\frac{3}{2} )[/tex]:

Combine [tex]5[/tex] and [tex]\frac{3}{2}[/tex]:

[tex]\frac{5⋅3}{2}[/tex]

Multiply [tex]5[/tex] by [tex]3[/tex]:

[tex]\frac{15}{2}[/tex]

The result can be shown in multiple forms.

Exact Form:

[tex]\frac{15}{2}[/tex]

Decimal Form:

[tex]7.5[/tex]

Mixed Number Form:

[tex]{7\frac{1}{2}[/tex]

Hence, The Evaluate the expression (12)2•(3•5−3)+13 is [tex]{7\frac{1}{2}[/tex]

#SPJ3

Answer:

Step-by-step explanation:

66666

A continuous variable is a variable that can take on any value within a certain range, and often takes the form of real numbers but a discrete variable is a variable that can only take on specific values within a certain range, and often takes the form of integers

Continuous and discrete variables are two types of quantitative variables in statistics.

A continuous variable is a variable that can take on any value within a certain range, and often takes the form of real numbers. Examples of continuous variables include height, weight, time, temperature, and distance. These variables can be measured using instruments with varying degrees of precision, but they can theoretically take on an infinite number of values.

On the other hand, a discrete variable is a variable that can only take on specific values within a certain range, and often takes the form of integers. Examples of discrete variables include the number of siblings a person has, the number of cars in a parking lot, and the number of points a basketball team scores in a game. These variables can only take on a limited number of values, and often represent counts or whole numbers.

The main difference between continuous and discrete variables is the way they can be measured and the number of possible values they can take. Continuous variables can take on an infinite number of values and can be measured with varying degrees of precision, while discrete variables can only take on specific values and are often measured with exact precision.

Learn more about discrete variable here

brainly.com/question/13339063

#SPJ4

The coordinates of triangle A'B'C' after a translation of triangle ABC based on the transformation rule (x, y) → (x - 4, y + 3) are A' (-2, 7), B' (-2, 0), and C' (3, 0).

The coordinates of quadrilateral Q'R'S'T' after a translation based on the transformation rule are Q' (-2, 0), R' (4, 0), S' (-2, -8), and T' (-2, -8).

In Mathematics, the translation of a geometric figure to the right simply means subtracting a digit to the value on the x-coordinate (x-axis) of the pre-image of a function.

By translating the coordinate of triangle ABC to the left by 4 units and vertically upward by 3 units, the coordinates include the following:

(x, y)                               →                          (x - 4, y + 3)

Coordinate A = (2, 4)   →    Coordinate A' (2 - 4, 4 + 3) = (-2, 7).

Coordinate B = (2, -3)   →    Coordinate B' (2 - 4, -3 + 3) = (-2, 0).

Coordinate C = (7, -3)   →    Coordinate C' (7 - 4, -3 + 3) = (3, 0).

By translating the coordinate of quadrilateral QRST vertically downward by 4 units, the coordinates include the following:

(x, y)                               →                          (x, y - 4)

Coordinate Q = (-2, 4)   →    Coordinate Q' (-2, 4 - 4) = (-2, 0).

Coordinate R = (4, 4)   →    Coordinate R' (4, 4 - 4) = (4, 0).

Coordinate S = (-4, -4)   →    Coordinate S' (-4, -4 - 4) = (-2, -8).

Coordinate T = (-2, -4)   →    Coordinate T' (-2, -4 - 4) = (-2, -8).

Read more on translation here: brainly.com/question/16486008

#SPJ1

So the reason for the discrepancy between the calculated result and the result obtained by hand is due to how the remainder is being handled.

By hand, the remainder is kept as a separate value, whereas a calculator may display the result as a decimal instead of showing the remainder.

When dividing 587 by 187 by hand, the result would indeed be 0 with a remainder of 16:

3 | 5 8 7

  - 5 6 1

  -------

    2 7 6

    2 8 1

    -----

      9 6

Therefore, the quotient is 0 with a remainder of 16, which can also be written as 0.085 by dividing the remainder (16) by the divisor (187).

However, when using a calculator, it may display the result as a decimal instead of showing the remainder. In this case, the calculator would compute 587 divided by 187 as 3.136, which can be rounded to 0.357 if the result is being displayed to three decimal places.

Learn more about calculator here: brainly.com/question/30719281

#SPJ4

At 7 a.m., the temperature was 2°.

Temperature is a measure of the average kinetic energy of particles in a system, measured in degrees on a specific scale (such as Celsius or Fahrenheit). The higher the temperature, the faster the particles move. Temperature is also related to heat, which is the transfer of energy between two systems at different temperatures. Heat always flows from a higher temperature system to a lower temperature system. In addition, temperature is related to pressure, which is the force exerted by the particles in a system. When the temperature of a system increases, so does the pressure.

At 7 a.m., the temperature was 2°. This is because temperatures dropped by 2° per hour until 2 o'clock in the morning. In the 6 hours (from 2 a.m. to 8 a.m.) there were 12° of decrease in temperature (2° per hour x 6 hours). This means that the temperature at 7 a.m. was -6° (2° - 12° = -6°).

To know more about Temperature Calculations, visit:

https://brainly.com/question/25677592

#SPJ1

Answer:

ED = 57 , AB = 19

Step-by-step explanation:

the midsegment FC is half the sum of the parallel bases , that is

[tex]\frac{AB+ED}{2}[/tex] = FC

[tex]\frac{4x+3+18x-15}{2}[/tex] = 38 ( multiply both sides by 2 )

22x - 12 = 76 ( add 12 to both sides )

22x = 88 ( divide both side by 22 )

x = 4

then

ED = 18x - 15 = 18(4) - 15 = 72 - 15 = 57

AB = 4x + 3 = 4(4) + 3 = 16 + 3 = 19

The binomial probability formula is used to calculate the probability of a specific number of successes in a fixed number of independent trials, where each trial can only result in success or failure. It is used to model situations where there are only two possible outcomes for each trial, and where the trials are independent and identically distributed.

The formula for binomial probability is:

[tex]P(x) = (n choose x) * p^x * (1 - p)^{n-x}\\[/tex]

where P(x) is the probability of x successes in n trials, p is the probability of success on each trial, (n choose x) is the binomial coefficient which gives the number of ways to choose x successes from n trials, and (1 - p) is the probability of failure on each trial.

The binomial probability formula can be used in a variety of applications, such as:

For more questions on Binomial Probability

https://brainly.com/question/9325204

#SPJ4

Answer:

If ABCD is a square, all sides are 11 and all angles are 90 degrees, so:

BC = AD = 11

AC = BD = 11√2

EC = AC - AE = 11√2 - 11 = 11(√2 - 1)

mDAB = 90 degrees

mAEB = 180 - mDAB = 90 degrees

mCBD = 90 degrees

mBAC = 45 degrees

Step-by-step explanation:

Answer:

371.5 square units.

Step-by-step explanation:

the shaded region is a ring-shaped region between the two concentric circles, we can find the area of the shaded region as follows:

The area of the large circle is given by:

Area of large circle = π × r^2

where r is the radius of the large circle, which is 13.5.

Area of large circle = 22/7× (13.5)^2

Area of large circle ≈ 572.78

The area of the small circle is given by:

Area of small circle = π × r^2

where r is the radius of the small circle, which is 8.

Area of small circle = 22/7× (8)^2

Area of small circle ≈ 201.14

The area of the shaded region is the difference between the area of the large circle and the area of the small circle:

Area of shaded region = Area of large circle - Area of small circle

Area of shaded region ≈ 572.78 - 201.14

Area of shaded region ≈ 371.5

Therefore, the approximate area of the shaded region is 371.5square units.

Answer:

The area of the shaded region is 371.5 square units to the nearest tenth.

Step-by-step explanation:

To find the area of the shaded region of two concentric circles with a common center, subtract the area of the smaller circle from the area of the larger circle.

The formula for the area of a circle is A = πr², where r is the radius of the circle.

From inspection of the given diagram:

Therefore, the area of the shaded region is:

[tex]\begin{aligned}\textsf{Area of shaded region}&=\textsf{Area of larger circle}-\textsf{Area of smaller circle}\\&=\pi (13.5)^2-\pi (8)^2\\&=182.25 \pi - 64 \pi\\&=118.25 \pi\\&=371.493331...\\&=371.5\; \sf unit^2\;\;(nearest\;tenth)\end{aligned}[/tex]

The area of the shaded region is 371.5 square units to the nearest tenth.

When computing the correlation​ coefficient, the effect of changing the order of the variables on​ r is option (A) It has no effect on r

The correlation coefficient is a measure of the strength and direction of the linear relationship between two variables.

Changing the order of the variables has no effect on the correlation coefficient, It has no effect on r.

This is because the correlation coefficient measures the degree of association between two variables, regardless of which variable is designated as the dependent variable or independent variable. The formula for the correlation coefficient is symmetrical, meaning that it yields the same result regardless of the order in which the variables are entered into the formula.

Therefore, the correct option is (A)  It has no effect on r

Learn more about correlation coefficient here

brainly.com/question/27226153

#SPJ4

The standard form of the polynomial f( x ) = ( x + 4 )² - 18 is f( x ) = x² + 8 - 2.

The standard form of a polynomial is expressed as;

ax² + bx + c

To write a polynomial in its standard form, we simplify and arrange the terms in descending order.

Given the function in the question;

f( x ) = ( x + 4 )² - 18

First, simplify using FOIL Method

f( x ) = ( x + 4 )( x + 4 ) - 18

f( x ) = x( x + 4 ) + 4( x + 4 ) - 18

f( x ) = x² + 4x + 4x + 16 - 18

Add like terms

f( x ) = x² + 4x + 4x + 16 - 18

f( x ) = x² + 8 - 2

Therefore, the standard form is f( x ) = x² + 8 - 2.

Learn more about polynomial standard form here: https://brainly.com/question/29074766

#SPJ1

An object is moving along the x x -axis. At t t = 0 it is at x x = 0. Its x x -component of velocity vx v x as a function of time is given by vx(t)=αt−βt3 v x ( t ) = α t − β t 3 , where α= α = 7.2 m/s2 m / s 2 and β= β = 4.8 m/s4 m / s 4  the nonzero time at which x = 0 is 1.22 seconds.

To find the time at which the object is again at x=0, we need to solve the equation vx(t) = 0, which gives us:

αt - βt^3 = 0

t(α - βt^2) = 0

The solutions to this equation are t = 0 (which corresponds to the initial position) and t = ±√(α/β). Since we're looking for a nonzero time, we can discard the t = 0 solution and take t = √(α/β):

t = √(α/β) = √(7.2 m/s^2 / 4.8 m/s^4) = √(1.5 s^2) = 1.22 s

Therefore, the object is again at x=0 after a time of 1.22 seconds.

For more questions on Velocity

https://brainly.com/question/25749514

#SPJ4

The value of ∫[1/(x² - 25)^3/2]dx when x = 5 secθ using integral by substitution, the answer is (1/2)[(x/5)^2 - 1]^-1/2 + C

To solve this problem, we simply need to use integration by substitution.

∫[1/(x² - 25)^3/2]dx when x = 5 secθ

We can start by making the substitution x = 5 secθ, which implies that dx/dθ = 5 secθ tanθ.

Substituting these expressions into the integral, we get:

∫[1/(x² - 25)^3/2]dx = ∫[1/(25sec²θ - 25)^3/2] (5 secθ tanθ)dθ

Simplifying the denominator inside the integral:

25sec²θ - 25 = 25(sec²θ - 1) = 25tan²θ

Substituting this back into the integral:

∫[1/(25tan²θ)^3/2] (5 secθ tanθ)dθ = ∫(5/125)tanθ/cos³θ dθ = ∫tanθ/cos³θ dθ

We can simplify this using the substitution u = cosθ, which implies that du/dθ = -sinθ and, therefore, -du = sinθdθ.

Substituting these expressions back into the integral, we get:

∫tanθ/cos³θ dθ = -∫(1/u³) du = u^-2/2 + C

Substituting back u = cosθ, we get:

u^-2/2 + C = cos^-2θ/2 + C

Therefore, the final answer in terms of x is:

cos^-2θ/2 + C = (1/2)[(x/5)^2 - 1]^-1/2 + C

Since the solution is not in the option, the answer is none of these

Learn more on integral by substitution here;

https://brainly.com/question/22008756

#SPJ1

Derek bought a house for £140,000 and sold it for £145,500. To work out Derek's percentage profit, we need to use the formula:

Profit percentage = (Profit / Cost price) x 100%

Where:

In this case, Derek's profit is:

Substitute the values into the formula:

Therefore, Derek's percentage profit is 3.93%.

~ Zeph

The required value of h(t)=-20+11t at t=11 is , h(11)=101.

The word PEMDAS is primarily used in the US, although we refer to it as BODMAS in India and the UK. Yet, there is no distinction between them. For both the rule and brackets, addition, subtraction, multiplication, and division are performed in the same order.

The following is the full form of PEMDAS:

P – Parentheses  [{()}]

E – Exponents (Powers and Roots)

MD- Multiplication and Division (left to right) (× and ÷)

AS –A= Addition  and S= Subtraction (left to right) (+ and -)

whereas the full form of BODMAS is – Brackets Order Division Multiplication Addition and Subtraction.

If h(t)=-20+11t and you wish to evaluate h(11):

h(11)=-20+11(11)

h(11)=-20+121

h(11)=101

know more about PEDMAS Rule, visit:

https://brainly.com/question/24086845

#SPJ1

Generally, the main five functions of consumer protection agencies includes:

Consumer protection agencies are organizations that work to protect consumers from unfair and deceptive business practices. These agencies perform a variety of functions to promote fair and ethical business practices and ensure that consumers are able to make informed decisions when purchasing goods and services.

The list of the consumer protection agencies we have in U.S. are:

Read more about consumer protection

brainly.com/question/27474312

#SPJ1

The value of length 8inch into cm is 20.32 cm.

8inch can be converted into centimeters (cm) using the conversion factor of 1 inch equals 2.54 centimeters.  it's essential to use the appropriate conversion factor and ensure that the units cancel out correctly to arrive at the desired result.

Since 8 is a unit of inches, we can simply multiply 8 by the conversion factor of 2.54 cm/inch to get the equivalent measurement in centimeters.

So, the conversion can be done as follows:

8 inches x 2.54 cm/inch = 20.32 cm

Therefore, 8 inches is equal to 20.32 centimeters.

To know more about Length:

https://brainly.com/question/22157838

#SPJ4

_____The given question is incomplete, the complete question is given below:

How to convert 8 inches into cm.

The range for the function y = x + 5, when the domain is {-2, 2}, is {7, 3}.

From the question, we have the following parameters that can be used in our computation:

y = x + 5

Domain {-2, 2}

Substitute the known values in the above equation, so, we have the following representation

When x = 2, y = 2 + 5 = 7

When x = -2, y = -2 + 5 = 3

Hence, the range for the relation y = x + 5 is {7, 3}.

Read more about domain at

brainly.com/question/27910766

#SPJ1

Complete question

find the range of the following function when the domain is -2 and 2

y = x + 5

The conversion of 63 f to c is equivalent to approximately 17.22°C .

For 63 (degrees) Fahrenheit we write 63 °F, and (degrees) Celsius or centigrades are denoted with the symbol °C.

As a side note: the unit of temperature Fahrenheit is named after the German physicist Daniel Gabriel Fahrenheit.

So if you have been looking for 63 °F to °C, then you are right here, too.

To convert a temperature from Fahrenheit (°F) to Celsius (°C), you can use the formula:

°C = (°F - 32) * 5/9

So, to convert 63°F to °C, you can substitute 63 for °F in the formula:

°C = (63 - 32) * 5/9

= 31 * 5/9

= 155/9

≈ 17.22°C

Therefore, 63°F is equivalent to approximately 17.22°C (rounded to two decimal places).

For further questions on conversion,

https://brainly.com/question/30775072

#SPJ4

The equivalent exponential expressions are 625 · 5ˣ and [tex]a^{4 + x}[/tex].

Exponents are a short way of representing repeated multiplication. The exponent, or power, indicates the number of times the base is multiplied by itself.

An exponent is a small number written to the right and above the base number, indicating how many times the base number should be multiplied by itself.

By the rule of exponents,

Here we have

Exponents 5⁴· 5ˣ  

We can rewrite the above expression as follows

Since 5⁴ = 625

=> 5⁴· 5ˣ  = 625 · 5ˣ

By using the Rules of exponents,

=> 5⁴ + 5ˣ =  [tex]a^{4 + x}[/tex]

Therefore,

The equivalent exponential expressions are 625 · 5ˣ and [tex]a^{4 + x}[/tex].

Learn more about Exponents at

https://brainly.com/question/29125740

#SPJ1

The rank-nullity theorem states that the rank of a matrix plus the dimension of its null space equals the number of columns.

Thus, if the null space of a 4 x 5 matrix is three-dimensional, then the rank of the matrix is 5 - 3 = 2.

Answer to Question 2:

The dimension of the solution space of A x = 0 is 6 - 2 = 4, since the number of columns of A is 6 and its rank is 2. The solution space of A x = 0 is the null space of A, which has dimension 4 by the rank-nullity theorem.

Answer to Question 3:

No, the columns of A do not necessarily have to be linearly independent. The column space of A is the span of its columns, which has dimension p. However, the columns of A may be linearly dependent, which means that some columns can be expressed as linear combinations of the others.

Answer to Question 4:

To prove that H + K is a subspace of V, we need to show that it satisfies three conditions:

It contains the zero vector: 0 = 0 + 0 belongs to H + K, since it can be expressed as the sum of the zero vectors in H and K.

It is closed under vector addition: if w1 and w2 belong to H + K, then there exist h1 and k1 in H and K such that w1 = h1 + k1, and there exist h2 and k2 in H and K such that w2 = h2 + k2. Therefore, w1 + w2 = (h1 + h2) + (k1 + k2) belongs to H + K, since it can be expressed as the sum of vectors in H and K.

It is closed under scalar multiplication: if w belongs to H + K and c is a scalar, then there exist h and k in H and K such that w = h + k. Therefore, c w = c h + c k belongs to H + K, since it can be expressed as the sum of vectors in H and K.

Since H + K satisfies these three conditions, it is a subspace of V.

To know more about matrix :-

brainly.com/question/28180105

#SPJ4

Answer:

Step-by-step explanation:

Since the hexagon is regular, all of its sides have the same length. Therefore, each side has a length of 57 inches / 6 = 9.5 inches.

To find the area of the hexagon, we can use the formula:

Area = (3√3 / 2) × s^2

where s is the length of a side.

Substituting s = 9.5 inches, we get:

Area = (3√3 / 2) × (9.5 inches)^2

Area ≈ 244.3 square inches

Rounding to the nearest tenth, the area of the hexagon is 244.3 square inches.

For a regular pentagon, the apothem is the distance from the center of the pentagon to the midpoint of one of its sides. We can use the formula for the area of a regular pentagon to find the apothem:

Area = (5/4) × apothem × side length

Substituting the given values, we get:

118.25 square meters = (5/4) × apothem × (4.3 meters)

apothem = 118.25 square meters / (5/4) / (4.3 meters)

apothem ≈ 8.4 meters

Therefore, the length of the apothem is approximately 8.4 meters.

Since the hexagon is regular, all of its sides have the same length. Therefore, each side has a length of 90 feet / 6 = 15 feet.

To find the area of the hexagon, we can use the same formula as in the first problem:

Area = (3√3 / 2) × s^2

Substituting s = 15 feet, we get:

Area = (3√3 / 2) × (15 feet)^2

Area ≈ 1161.4 square feet

Rounding to the nearest tenth, the area of the hexagon is 1161.4 square feet.

first off, let's convert all mixed fractions to improper fractions.

[tex]\stackrel{mixed}{2\frac{7}{8}}\implies \cfrac{2\cdot 8+7}{8}\implies \stackrel{improper}{\cfrac{23}{8}} ~\hfill \stackrel{mixed}{1\frac{1}{4}} \implies \cfrac{1\cdot 4+1}{4} \implies \stackrel{improper}{\cfrac{5}{4}} \\\\[-0.35em] ~\dotfill\\\\ \stackrel{ whole }{\cfrac{23}{8}}-\stackrel{ used }{\cfrac{5}{4}}\implies \cfrac{(1)23~~ - ~~(2)5}{\underset{\textit{using this LCD}}{8}}\implies \cfrac{23-10}{8}\implies \cfrac{13}{8}\implies \stackrel{ leftover }{1\frac{5}{8}}[/tex]

15 members of the club voted in the election.

To find out how many members voted, we can start by calculating 30% of the total number of club members:

30% of 50 = (30/100) * 50 = 15

So 15 members of the club voted in the election.

Based on the given conditions, formulate:

Reduce the fraction: (30/100)

Multiply a number to both the numerator and the denominator:

(30/100) * 50

Write as a single fraction: 0.3 * 50

Calculate the product or quotient: 15

Rewrite a fraction with denominator equals 100 to a percentage:

Answer: 15

The French club held elections to elect new board members. 50 club members, or 30% of them, cast ballots. So, 15 members casted the most votes.

Learn more about fraction here :

brainly.com/question/10354322

#SPJ4