Answer:
a = 1.428 [m/s²]
v₀ = 5 [m/s]
Explanation:
To solve this problem we must use the following equation of kinematics.
[tex]x=x_{o}+v_{o}*t+\frac{1}{2}*a*t^{2}[/tex]
where:
x = final point [m]
x₀ = initial point [m]
v₀ = initial velocity [m/s]
a = acceleration [m/s²]
t = time [s]
But we need to use this additional equation.
[tex]v_{f}=v_{o}+a*t[/tex]
where:
vf = final velocity = 15 [m/s]
Now we can use this equation, replacing it, in the first one. We must bear in mind that the difference among x - x₀ is equal to 70 [m]
[tex]x-x_{o}=v_{o}*t+\frac{1}{2}*a*t^{2} \\x-x_{o}=(v_{f}-a*t)*t+\frac{1}{2} *a*t^{2}\\70=(15-a*t)*t+\frac{1}{2}*a*t^{2}\\70=15*t-a*t^{2} +\frac{1}{2}*a*t^{2} \\70=15*t-\frac{1}{2}*a*t^{2}\\70=15*(7)-\frac{1}{2} *a*(7)^{2}\\105-70=0.5*a*49\\35=24.5*a\\a=1.428[m/s^{2} ][/tex]
Now replacing this value in the second equation, we can find the initial velocity.
[tex]15=v_{o}+1.428*7\\v_{o}=5[m/s][/tex]
What is the difference between a vigorous sport and vigorous recreation ?
Answer:
Explanation:El ejercicio vigoroso previene en mayor medida el síndrome metabólico (un conjunto de enfermedades que aumentan el riesgo cardiovascular )
mientras que una reacción vigorosa se produce entre el aluminio y el gas cloro. Como consecuencia de la gran cantidad de energía liberada se producen luz y calor
The temperature of boiling water cannot be measured by alcohol
thermometer.
Answer:
It can be measured by using laboratory thermometer.
An insulated rigid tank with a volume of 0.57 m3, contains 4 kg of Argon gas at 450 kPa and 30 C. A valve is now opened, and the Argon is slowly allowed to escape until the pressure inside drops to 200 kPa. Assuming the Argon remaining inside the tank has undergone a reversible, adiabatic process, determine the final mass in the tank,
Answer:
The value is [tex]m_2 = 2.46 \ kg[/tex]
Explanation:
From the question we are told that
The volume of the tank is [tex]V = 0.57 \ m^3[/tex]
The mass of the Argon it contains is [tex]m = 4 \ kg[/tex]
The initial pressure on of the gas is [tex]P_1 = 450 kPa = 450 *10^{3} \ Pa[/tex]
The initial temperature is [tex]T_1 = 30^oC = 30 + 273 = 303 \ K[/tex]
The new pressure inside the tank is [tex]P_2 = 200 \ kPa = 200 *10^{3} \ Pa[/tex]
Gnerally given that the Argon remaining inside the tank has undergone a reversible, adiabatic process, then the final temperature of the Argon gas is mathematically represented as
[tex]T_2 = T_1 * [\frac{P_2}{P_1} ]^{ \frac{(k - 1 )}{k} }[/tex]
Here k is the specific heat ratio of Argon with value [tex]k = 1.667[/tex]
So
[tex]T_2 = 303 * [\frac{200}{450} ]^{ \frac{(1.667- 1 )}{1.667} }[/tex]
=> [tex]T_2 = 219 \ K[/tex]
Generally from the ideal gas equation
[tex]PV = mRT_2[/tex]
So
[tex]\frac{P_1V}{P_2V} =\frac{ m_1 * R * T_1 }{ m_2 * R * T_2}[/tex]
Here R is the gas constant with value [tex]R = 8.314 \J \ K^{-1}\ mol^{-1}[/tex]
=> [tex]m_2 = \frac{P_2 * T_1 }{ P_1 * T_2 } * m_1[/tex]
=> [tex]m_2 = \frac{200 * 303 }{ 450 * 219 } * 4[/tex]
=> [tex]m_2 = 2.46 \ kg[/tex]
Dos cargas q1= 5 Milicoulombios y q2 = 6 Milicoulombios, se encuentran separadas 4 cm y sufren una fuerza entre ellas. ¿Cuál será el valor de la fuerza entre ambas cargas? ¿Existirá una fuerza de atracción o de repulsión? ¿Por qué?
Answer:
El valor de la fuerza entre ambas cargas es 168,750,000 N.
Ambas cargas son positivas, por lo que entre ellas existirá una fuerza de repulsión.
Explanation:
Los responsables de todos los fenómenos eléctricos son los electrones, porque pueden escapar de la órbita del átomo y son mucho más ligeros que las otras partículas.
La carga eléctrica es una propiedad física propia de algunas partículas subatómicas que se manifiesta mediante fuerzas de atracción y repulsión entre ellas. La materia cargada eléctricamente es influida por los campos electromagnéticos, siendo a su vez, generadora de ellos.
Entre dos o más cargas aparece una fuerza denominada fuerza eléctrica cuyo módulo depende del valor de las cargas y de la distancia que las separa, mientras que su signo depende del signo de cada carga.
La fuerza entre dos cargas se calcula como:
[tex]F=k*\frac{Q*q}{d^{2} }[/tex]
donde:
F es la fuerza eléctrica de atracción o repulsión y se mide en Newtons (N). Q y q son lo valores de las dos cargas puntuales y se miden en Culombios (C). d es el valor de la distancia que las separa y se mide en metros (m)k es una constante de proporcionalidad llamada constante de la ley de Coulomb. Depende del medio en el que se encuentren las cargas. Para el vacío k es aproximadamente 9·10⁹ N·m²/C² utilizando unidades en el S.I.Siendo 1 millicoulomb [mC] = 0,001 coulomb [C] y 100 cm= 1 m, en este caso sabes:
Q= 5 mC= 0.005 Cq= 6 mC= 0.006 Cd= 4 cm= 0.04 mReemplazando:
[tex]F=9*10^{9}\frac{N*m^{2} }{C^{2} } *\frac{0.005C*0.006C}{(0.04m)^{2} }[/tex]
F= 168,750,000 N
El valor de la fuerza entre ambas cargas es 168,750,000 N.
Las cargas del mismo signo se repelen, mientras que las cargas con diferente signo se atraen. En este caso ambas cargas son positivas, por lo que entre ellas existirá una fuerza de repulsión.
who was the first president of the united states
Answer:
George Washington
Explanation:
Answer:
well for me
Explanation:
It was George Washington
uh guys so i forgot everything that i took in physics and now i a question, whats p=mv
p stands what?
Answer:
P is momentum.
Explanation:
Brainliest Please!!?!!
- ElizabethKate.
. A motorist is speeding along at 33m/s when he sees a squirrel on the road 200 meters in
front of him. He tries to stop, but it takes 12 seconds for his car to stop
(a) What is the acceleration of the car? (assume acceleration was constant)
(b) Does the squirrel survive?
(c) How fast was the car moving at 100 meters?
Hello!
a)
Use the kinematic equation to solve for the acceleration:
[tex]v_{f} = v_{i} + at[/tex]
In this instance, the final velocity is 0 because he comes to a stop. We can solve for the acceleration by plugging in the given values:
0 = 33 + (12)a
0 = 33 + 12a
-33 = 12a
-33 / 12 = a --> a = -2.75 m/s²
b) Find the amount of distance necessary to stop. Use the formula:
[tex]v_{f} ^{2} = v_{i} ^{2} + 2ad[/tex]
Plug in the values:
0² = 33² + 2(-2.75 · d)
0 = 1089 - 5.5d
-1089 = -5.5d
d = 198 meters. Therefore, the squirrel would survive.
c)
Find the velocity at 100 meters by using the same formula as before:
[tex]v_{f} ^{2} = v_{i} ^{2} + 2ad[/tex]
However, in this instance, we are solving for the final velocity. Plug in the given points to solve:
vf² = 33² + 2(-2.75 · 100)
vf² = 1089 + (-550)
vf² = 539
vf = √539
vf ≈ 23.22 m/s.
Enter the appropriate word(s) to complete the statement. (Choose from the words between parentheses)
In a inelastic , elastic)-
collision, both momentum and kinetic energy are conserved
-
Answer:
The correct option is;
Elastic
Explanation:
In an elastic collision, the initial kinetic energy of the system is equal to the final kinetic energy of the system, such that there is no loss in the net kinetic energy available at a specific time or stage in the system
Therefore, we have;
1/2·m₁·v₁₁² + 1/2·m₂·v₂₁² = 1/2·m₂·v₁₂² + 1/2·m₂·v₂₂²
From which we get;
m₁·v₁₁ + m₂·v₂₁ = m₂·v₁₂ + m₂·v₂₂
Which is indicates that the initial and momentum of the system is also conserved
Therefore, in an elastic collision, both momentum and kinetic energy are conserved.
A tourist stands at the top of the Grand Canyon, holding a rock, overlooking the valley below. Find the final velocity, and displacement of the rock after 4.0 seconds give the three initial conditions listed below.
a. The rock is dropped vertically from rest
b. The rock is tossed vertically upward with 8.0 m/s of speed
c. The rock is tossed vertically downward with 8.0 m/s of speed TV TV
Answer:
a. Vf = 39.24 [m/s]
b. Vf = 31.24 [m/s]
c. Vf = 47.24 [m/s].
Explanation:
To solve this problem we can use the following equation of kinematics. We have to keep in mind that the gravitational acceleration acts downwards, therefore when the rock falls towards the abyss it has the same direction of the acceleration and that is why the gravitational acceleration has a positive sign in the equation.
[tex]v_{f}=v_{o}+g*t[/tex]
where:
Vf = final velocity [m/s]
Vo = initial velocity = 0 (when the rock is dropped)
g = gravitational acceleration = 9.81 [m/s²]
t = time = 4 [s]
a.
[tex]v_{f}=0+9.81*4\\v_{f}= 39.24 [m/s][/tex]
b.
In this particular situation, the acceleration will be taken as negative because the gravity is pointing in the opposite direction of the movement of the rock.
[tex]v_{f}=8-(9.81*4)\\v_{f}=-31.24[m/s][/tex]
The negative sign in the answer tells us that the rock no longer moves up instead it does downwards when 4 seconds have passed.
c.
[tex]v_{f}=8+(9.81*4)\\v_{f}=47.24[m/s][/tex]
A meter stick of uniform density is pivoted at the 75 cm mark and a 250 g mass is placed at the 90.0 cm mark. If it balances the meter stick, what is the mass of the meter stick
Answer:
The mass of the meter stick is 50 g.
Explanation:
make a sketch of the problem statement;
0-------------------------------------------------75cm------90cm-----100cm
↓ Δ ↓
W 250 g
where;
W is the mass of the meter stick
Apply the principle of moment; take moment about the pivot.
sum of the anticlockwise moment = sum of the clockwise moment
W(75 - 0) = 250(90 - 75)
W(75) = 250(15)
W(75) = 3750
W = 3750 / 75
W = 50 g
Therefore, the mass of the meter rule is 50 g.
You walk exactly 250 steps North, turn around, and then walk exactly 400 steps South. How far are you from your starting
point?
steps to the
North, South, East or West)
Answer:
150 steps south
Explanation:
250 north 250 back to start then continue south for remainder of 400 steps. 150 south
10 cm^3 of iron have a smaller
mass then 115 cm^3 of wood.
(density of iron 7.9 g/cm^3)
(density of wood 0.7 g/cm^3)
true or false
Explanation:
Mass of iron = (7.9)(10) = 79g
Mass of wood = (115)(0.7) = 80.5g
Therefore iron has a smaller mass than the wood, which is true.
Which of the following is the most likely consrquence of gang involvement
Answer:
????
Explanation:
was their supposed to be a picture?
Which of the following is true about sound waves?
1:they move faster than light
2:they make wind
3:the vibrate the air
4: they move slower in water than air
Answer:
They transmit by vibration through mediums such as air. So #3 is most logical answer.
Explanation:
It is in fact vibration of air (sound waves) which is transformed by the tympanic membrane in the ear of human to audible sounds.
++++++++++++++++++++++++++++++++++++++++++++++
Sound travels slower than light
Move faster in water than air.
Wind blowing through leaves and other objects creates sounds.
Answer:
(Question) Which type of wave needs a medium to travel?
(Answer) sound waves, because they travel by oscillating molecules
(Question) What do both sound and light waves transfer?
(Answer) energy
(Question) How does an increase in amplitude affect sound and light waves?
(Answer) louder sound and brighter light
(Question) What happens to the wavelength when the frequency increases?
(Answer) The wavelength decreases.
(Question) Which of the following is true about sound waves?
(Answer) Sound moves faster in the ocean than in the air.
Explanation:
i just did the quick check
PLEASE HELP ME this is due in 20 mins!!!!!
See how a block and tackle system can increase your mechanical advantage. You will need two broomsticks, a rope, and two helpers.
A. Give each helper a broom stick and have them stand facing each other holding the broomstick firmly in both hands in a horizontal position. The broomsticks should be at the same level, about two feet apart.
B. Tie one end of the rope to one of the broomsticks. (You may need to have one of your helpers hold the knot firmly in one hand as he or she holds the broomstick to help anchor it.)
C. Wrap the rope around the other broomstick, as in a simple pulley system, and pull on the free end of the rope. Your helpers should resist your pulling. What happens? Can you pull the broomsticks together?
D. Now weave the rope back over the first broomstick, so you have a double pulley. Pull on the free end. What happens now? Can you pull the broomsticks together? What is your mechanical advantage?
E. Try weaving the rope over the broomsticks one or two more times. Describe what happens, and state the mechanical advantage of each situation.
F. Write a summary of what happened and an explanation using the terms:
force
distance
work
mechanical advantage
Psychology:
Retrograde amnesia is the memory loss of events that occurred after the onset of amnesia.
True or False
It’s false.
Answer:
thank you
Explanation:
Answer:
False is correct
Explanation:
Peace and Love
help!!! if it’s blurry click on it and zoom in but i need to know the net forces!!!
Answer:
the net force is 330N
Explanation:
Answer:
270N to the left
Explanation:
Since the 3 individual forces are all parallel to each other and effect the x-axis, you can add and subtract them to find the net force.
The three forces are:
200 N to the LEFT
300 N to the LEFT
230 N to the RIGHT
First, add up any multiples of forces with the same direction. Basically, add up all the forces going LEFT and all going RIGHT.
200 N + 300 N = 500 N LEFT
230 N RIGHT
In order to find resultant magnitude you must now subtract the larger force from the smaller force. The resultant direction will be in the direction of the larger force.
Magnitude of Net Force: 500 N - 230 N = 270 N
Net Force Direction: Direction of larger force: Direction of 500N force: LEFT
Dont decorate a tree in front of a cat lol we finished decorating the tree last night and the cat climbed up the tree and knocked it over XD
what is meant by lenght
Answer:
the size of something from one end to the other; how long something is
It took a bulldozer 62,000 J of work to move a rock 30 m. It took 5 minutes. How much force did the bulldozer have to apply?
A- 2066.6 N
B- 413.33 N
C- 12,400 N
D- 10,333.33 N
Answer:
A (2066,6 N)
Explanation:
Use the Work formula
62.000J = F . 30
62.000/30 = 2066,6 N
The amout of time it took to move the rock doesn´t matter at all.
It is called a distraction variable, We don´t need it to solve the problem it is there just to confuse.
What is string theory? Need answer in own word
Answer:
When point particals are replaced by string like particals
Explanation:
A 0.2 kg baseball is pitched with a velocity of 40 m/s and is then batted to the pitcher with a velocity of 60 m/s. What is the magnitude of change in the ball's momentum?
Answer:
The magnitude of change in the ball's momentum is 4 kgm/s
Explanation:
Given;
mass of the ball, m = 0.2 kg
initial velocity of the ball, u = 40 m/s
final velocity experienced by the ball, v = 60 m/s
Therefore, the change in momentum of the ball is given as final momentum minus initial mometum;
ΔP = mv - mu
ΔP = m(v-u)
ΔP = 0.2 (60 - 40)
ΔP = 4 kgm/s
Therefore, the magnitude of change in the ball's momentum is 4 kgm/s
The magnitude of the change in the momentum of the baseball is 4 kgm/s.
To solve the problem above we need to use the formula of change in momentum
Change in momentum: This can be defined as the product of the mass and the change in velocity of a body.
The formula of change in momentum is
M = m(v-u).................. Equation 1
Where M = change in momentum, m = mass of the baseball, v = final velocity of the baseball, u = initial velocity of the baseball.
From the question
Given:
m = 0.2 kg v = 60 m/s u = 40 m/sSubstitute these values into equation 1
M = 0.2(60-40) M = 0.2(20) M = 4 kgm/sHence, The magnitude of the change in the momentum of the baseball is 4 kgm/s
Learn more about change in momentum here: https://brainly.com/question/11789105
A plumb bob is hanging from the ceiling of a car. If the car moves with an acceleration a, what is the angle made by the string with the vertical?
Answer:
[tex]\theta=\tan^{-1}\dfrac{a}{g}[/tex]
Explanation:
Here we are assuming that the car is moving in a straight line and is traveling on a smooth surface. When the car is moving with acceleration [tex]a[/tex] the bob moves in the opposite direction with the same acceleration. Gravity is acting on the bob so it is experiencing an acceleration of [tex]g[/tex] downwards.
The angle between the acceleration [tex]a[/tex] and the acceleration due to gravity [tex]g[/tex] is
[tex]\theta=\tan^{-1}\dfrac{a}{g}[/tex].
If a current of 2.5 Ampere flow through a circuit in 15 minutes calculate amount of charge through a crcuit
Answer:
Q = 2250 Coulombs
Explanation:
We are given;
Current: I = 2.5 A
Time: t = 15 minutes = 15 × 60 seconds = 900 s
Now formula for the amount of charge through the circuit is given by:
Q = It
Thus;
Q = 2.5 × 900
Q = 2250 Coulombs
A girl walks 0.3 m/s. She moves 0.8 m/s 5 s later.
What is the girl’s acceleration?
0.8 m/s
0.5 m/s, 2
0.3 m/s
0.1 m/s2
Answer:
a = 0.1 [m/s²]
Explanation:
To solve this problem we must use the following equation of kinematics.
[tex]v_{f}=v_{o}+a*t[/tex]
Vf = final velocity = 0.8 [m/s]
Vo = initial velocity = 0.3 [m/s]
a = acceleration [m/s²]
t = time = 5 [s]
[tex]0.8=0.3+a*t\\0.5 = 5*a\\a = 0.1 [m/s^{2}][/tex]
a fire woman dropped a person onto the safety net. right before the person hit the net he had a velocity of 11.2m/s and 1800j of kinetic energy
Answer: 28.699
Explanation:
KE=1/2(mv²)
1800=1/2m (125.44)
14.349=2m
m=28.699
Answer:
28.699
Explanation:
A block has a length of 1.0 cm, a width of 3.1 cm, and a height of 2.5 cm. What is the block's volume to the nearest tenth?
Answer:
8
Explanation:
1.0 × 3.1 × 2.5 = 7.75 cm^3
nearest tenth 8cm^3
what is meant by momentum?
Answer:
Im afraid i need to to know more on what your asking, are you asking what is momentum?
Explanation:
Because therefore it is the quantity of motion of a moving body, measured as a product of its mass and velocity to the state of motion
or
p = mv
I hope this helps and have a good day, or to best that you can make it <33
Answer:
Momentum can be defined as "mass in motion "OrMomentum is how we measure mass that is in motion ORMomentum,product of mass of particle and its velocityExplanation:
Please mark my answer as a brainliest. Please follow me. ❤❤❤❤❤A cyclist travels 100 kilometers in 4 hours. What is the cyclist speed?
Answer:
100x4=400 kilometers
Explanation:
: )
Answer:
100÷4=25
Explanation:
you would devide
A car is moving along a straight horizontal road. The car has 1.6MJ of kinetic energy. The car accelerates for 20s until the kinetic energy of the car increases to 2.5MJ. What is the minimum average power developed by the car engine for this acceleration?
Answer:
P = 45 [kW]
Explanation:
We must find the difference in kinetic energy during the 20 seconds.
[tex]D_{kE}=2.5-1.6\\D_{kE}=0.9[MJ][/tex]
Power is defined as the relationship between energy over time.
[tex]P=D_{kE}/t\\P=0.9/20\\P=0.045[MW] or 45 [kW][/tex]
