According to the question b. Dominant. Dominant alleles are expressed even when present in a single dose, whereas recessive alleles require two doses (homozygous) to be expressed.
What is Dominant ?Dominant is a term used to refer to something that is the most powerful or influential over others. It can be used to describe a person, group, trait, or behavior. In terms of people, it can refer to a leader who is strong and forceful in their opinions and actions.
In terms of traits, dominant often describes a trait that is more common than others in a particular population. For example, brown eyes may be dominant in a particular group. When discussing behavior, dominant is used to describe a behavior that is seen more often than other behaviors in a given situation.
To learn more about Dominant
https://brainly.com/question/9838245
#SPJ4
you can reduce your chances of being involved in an collosion by knowing and using the standerd collsion prevention formula what is it
We can reduce our chances of being involved in a collision by knowing and using the standard collision prevention formula and the formula is Be alert - Be prepared - Act in time.
Never assume that the driver behind you won't make a mistake on the road. Get ready: Discover how to react quickly in any circumstance, and be prepared for the unexpected at all times. Act quickly and try not to freak out. Understand what to do if a surprising event occurs. Although certain crashes are riskier than others, they are always dangerous results of unsafe driving. Most collisions are caused by speeding and disregard for traffic regulations. Every motorist has a duty to reduce the possibility of colliding with other vehicles, pedestrians, or other roadside items. There is nearly always something you can do to prevent or lessen an impending collision.
Know more about standard collision prevention formulas here:
https://brainly.com/question/22989352
#SPJ4
What is the correct order of the following user interfaces from the earliest to the most current?
Select one:
a. GUI, CLI, TUI
b. CLI, TUI, GUI
c. TUI, CLI, GUI
d. GUI, TUI, CLI
B) The following user interfaces should be listed in chronological sequence from the earliest to the latest: CLI, TUI, and GUI.
In the early computer systems, the Command Line Interface (CLI) was the first kind of user interface. To engage with the system, the user had to type commands in a particular format. After the CLI, the Text-based User Interface (TUI) offered a graphical display with a number of predefined options that the user could choose from using the keyboard. Today, the TUI is still in use, notably in specific kinds of software and applications. The most recent kind of user interface to be created was the Graphical User Interface (GUI), which used graphical features like windows, menus, and icons to provide a more user-friendly and intuitive method to interact with computers.
learn more about Command Line Interface here:
brainly.com/question/29590552
#SPJ4
An incident handler needs to preserve evidence for possible litigation. Which of the following will the incident handler MOST likely do to preserve
the evidence?
A. Encrypt the files.
B. Clone any impacted hard drives.
C. Contact the cyber insurance company.
D. Inform law enforcement.
Clone any impacted hard drives to preserve the evidence. The correct option is B.
What is litigation?Litigation is basically the process of taking an argument between people or groups to a court of law.
When an incident handler needs to preserve evidence for potential litigation, one of the most important things to do is to create a forensic copy or clone of the impacted hard drives, which will preserve the data in its original state and ensure that it has not been altered.
This is significant because the evidence may be required in court, and any changes or modifications could render it invalid.
Encrypting the files, notifying law enforcement, and contacting the cyber insurance company are all necessary steps in responding to a security incident, but they do not specifically address evidence preservation.
Thus, the correct option is B.
For more details regarding litigation, visit:
https://brainly.com/question/14678868
#SPJ1
3. the primary source of power for industrial production in the antebellum period was a. coal. b. steam. c. water. d. wood.
Even though steam power was also employed at the time, water power remained the main source of energy for industrial output.
When year did industrialization start?The Industrial Revolution was the transition from manual to machine production of goods. Although the historical period mostly included the years 1760 to 1840, scholars are divided over when it started and ended.
Which type of energy played a major role in the early Industrial Revolution?The coal-fired steam engine was the Industrial Revolution's key technology in many ways.
To know more about technology visit:-
https://brainly.com/question/20414679
#SPJ1
Monty is building a project team. He’s considered the project complexity, team size, and location. What else should Monty consider when building a team against project resource requirements?
A. JIT modeling
B. Executable specifications
C. Prioritized requirements
D. Organization distribution
When building a team against project resource requirements, Monty should consider the skill sets and expertise needed, as well as the availability and allocation of resources such as budget, equipment, and technology. The correct option from the given choices is C. Prioritized requirements.
Prioritized requirements refer to the process of organizing and ranking project requirements based on their importance and urgency. It involves identifying and assessing the needs, objectives, and constraints of the project, and then determining the order in which these requirements should be addressed and fulfilled.
Prioritization ensures that the most critical and valuable requirements are given higher priority, allowing the project team to focus their efforts and resources on the aspects that are essential for project success. This helps in managing time, budget, and resources effectively and enables the team to deliver the most valuable outcomes to stakeholders.
Learn more about Prioritized requirements here:
https://brainly.com/question/32588934
#SPJ12
a faulty metering valve will cause pressure to build rapidly in the rear brakes, which causes a rear-wheel lockup during hard braking.
True Flase
It is true that a faulty metering valve will result in rapid pressure buildup in the rear brakes, locking up the rear wheels when braking hard.
A brake system's metering valve serves what purpose?A metering valve is a necessity for the disc/drum brake system in order to maintain proper balance. When the master cylinder's fluid flow is controlled by a metering valve, the rear drum brakes engage prior to the front disc brakes. This prevents the car from nose-diving when braking and allows it to settle evenly.
If the pressure differential valve is broken, what would happen?When pressure drops on one side of the Pressure Differential Valve versus the other, it is designed to move in the opposite direction. The master cylinder's fluid basically hits a wall when this happens. The pedal becomes extremely rigid as a result of the inability to compress the brake fluid.
To know more about metering valve visit :-
https://brainly.com/question/29219392
#SPJ4
a pipe cleaner can be recommended to clean in which type of embrasure space?
A pipe cleaner can be recommended to clean in Type III of embrasure space.
What is a pipe cleaner?
An interdental tool called a pipe cleaner is used to clean in between teeth surfaces with large spacings. Pipe cleaners should only be placed partially between the teeth, just far enough to massage the gum tissue and scrape away any plaque. For people with open furcations and Type III embrasures, pipe cleaners are advised.
The pipe cleaner's metal core makes it simpler to use in a wide area, but it should be used carefully as it can harm soft tissues. A section of a pipe cleaner should be inserted into the embrasure space or furcation region, cut into 3-inch lengths. Wrap your fingers around the interior root surface and rock back and forth like you are shining shoes.
Learn more about pipe cleaner:
https://brainly.com/question/20716104
#SPJ4
Complete question is:
A pipe cleaner can be recommended to clean in which type of embrasure space?
Question 2 options:
1)
Type I
2)
Type II
3)
Type III
4)
Type IV
Only one element tensors can be converted to python scalars. True or False?
The only tensors that can be converted to Python scalars are, in fact, those with a single element.
Why are scalars used in Python?
In NumPy, a scalar is the name for each element you include in an array. Similar to the concept of a field element used to define a subspace in linear algebra. As a result of NumPy, every scalar in such an array needs to be of the same type.
How do scalar values operate?
An unambiguous definition of a numeric value is one in which the magnitude is the only component. Since it only includes the speed at which you are going, your speed is an example of a scalar. Being tall would be the only factor determining your height, .
Learn more about tensors here:
https://brainly.com/question/28204268
#SPJ4
A boiler produces steam, which is then used to heat a reactor vessel inside a steam jacket. The boiler is located on a stand next to the vessel. When the boiler is heated, the temperature at the top of the reactor (Point A) is hot, but the bottom of the reactor (Point B) is cold.
image as described in question
What might be causing the cool spot at the bottom?
There is no stirrer in the reactor.
Steam always rises to the top.
The steam is not hot enough.
There is condensate backing up in the jacket.
Condensate buildup in the jacket may be the cause of the chilly region at the bottom of the reactor (Point B). Any condensate that forms should be drained away when steam is used to heat a vessel through a boiler jacket.
What is a boiler's steam used for?Water heating, sanitation, cooking, waste energy utilisation, and central heating are all uses for steam boilers in HVAC systems. Warm air from fire-tube boilers is circulated through a house or warehouse's rooms.
The operation of a boiler systemGas, oil, or coal are used in boilers to heat the water contained within the vessel. Depending on the sort of boiler you have, this heated water is either maintained in liquid form or converted to steam.
To know more about boiler visit:-
https://brainly.com/question/30334187
#SPJ1
a data classification standard provides a consistent definition for how an organization should handle and secure different types of data. (T/F)
True. The set of rules and guidelines a company uses to categorize its data is known as a data classification standard. The standard offers a framework for determining data sensitivity and classifying it appropriately for successful handling.
According to a common definition, data categorization is the process of classifying data into appropriate categories so that it can be used and protected more effectively.
In essence, finding and retrieving data is made simpler by the classification process. For risk management, compliance, and data security, data classification is essential.
To make information easy to find and search for, it must be categorized. Also, it gets rid of duplicate copies of the data, cutting back on storage and backup expenses while accelerating search times.
Despite the fact that it could seem very challenging, the classification process needs to be communicated to the leadership of your company. The classification of data has greatly improved over time. The technology is presently used for a variety of purposes, typically in support of activities aimed at enhancing data security. Nonetheless, data can be categorized for a number of reasons, including accessibility, assuring regulatory compliance, and attaining various other professional or personal objectives.
To know more about data classification:
brainly.com/question/30154126
#SPJ4
a value of ____ in the rotation box is appropriate for an object that should appear straight up and down.
A value of 0 (zero) in the rotation box is appropriate for an object that should appear straight up and down.
What is the rationale for the above response?What the above means is that the object is not rotated at all, and its top edge is parallel to the top edge of the screen or viewport. Increasing the value in the rotation box rotates the object clockwise, while decreasing the value rotates it counterclockwise.
The rotation box is used to set the rotation angle of an object in degrees. A value of 0 (zero) means that the object is not rotated at all and is upright, with its top edge parallel to the top edge of the screen or viewport. This is because a full rotation is 360 degrees, so a value of 0 indicates that the object has not been rotated at all. Increasing or decreasing the value rotates the object clockwise or counterclockwise, respectively.
Learn more about rotation at:
https://brainly.com/question/13720584
#SPJ1
what is a board foot
Sawmills and producers of timber and lumber products use the board foot as a unit of measurement to precisely determine how much wood may be removed from a log or plank.
Describe a log?This computation can be used to solve engineering issues involving mass and heat transport. A text file called a "server log" keeps track of all activity involving a particular server over a given period of time.
What do servers do?The actual computer which a server programme runs on in a data centre is also usually referred as a servers.
For instance, a Web server just on World Wide Web is indeed a computer that utilises using HTTP protocol to transfer Web content to a browser in response to a client request.
To know more about log visit :
https://brainly.com/question/28596588
#SPJ4
A device for measuring the specific weight of a liquid consists of a U-tube manometer as shown. The manometer tube has an internal diameter of 0.5 cm and originally has water in it. Exactly 2 cm3 of unknown liquid is then poured into one leg of the manometer, and a displacement of 5 cm is measured between the surfaces as shown. What is the specific weight of the unknown liquid? PROBLEM 3.54
The specific weight of the unknown liquid is (5 cm * 1000 kg/m3) / (2 cm3) = 2500 kg/m3.
What is the liquid ?The liquid is a state of matter that has a definite volume but no definite shape. It is made up of particles that are free to move around and take the shape of their container. Liquids are able to flow and can be poured, but the molecules are close together and relatively strong intermolecular forces exist. Examples of liquids include water, alcohol, oil, and other chemical compoun
The specific weight of the unknown liquid can be calculated using the equation
Specific Weight = (Displacement * Density of Water) / Volume of Unknown Liquid
For this problem, the specific weight of the unknown liquid is (5 cm * 1000 kg/m3) / (2 cm3) = 2500 kg/m3.
To learn more about liquid
https://brainly.com/question/30129462
#SPJ1
Transcribed image text: Which choice is a good reason to segment a network? Network segments that are more accessible to the Internet are known by what new term? Screened subnet Enhanced subnet None of these
The choice is a good reason to segment a network as the network segments that are more accessible to the Internet are known by new term is screened subnet.
What do subnet masks mean?A subnet mask is a 32-bit numeral formed by setting keeper bits to all 0s and developing network times to all 1s. In this way, the subnet mask divides the IP speech into the network and host addresses.
A subnet mask is used to separate an IP address into two pieces. One element defines the host (computer), and the different part identifies the network to which it belongs.
Therefore, The choice is a good reason to segment a network as the network segments that are more accessible to the Internet are known by new term is screened subnet.
Learn more about IP speech on:
https://brainly.com/question/16011753
#SPJ1
What is the demand factor?
noun. : the ratio of the maximum demand in the course of an assigned length upon an electric-power system to the load absolutely linked all through that time expressed usually in per cent.
Is demand issue usually less than 1?Generally, the fee of demand factor is much less than 1. It is due to the fact the most demand on the power station is normally much less than the related load to the power station. The understanding of demand issue is important in deciding the capability of tools of the power plant.
What is demand issue formula?Demand Factor = Maximum demand / Total related load = 1.5 Kw / 12 Kw = 0.125.
Learn more about demand factor here;
https://brainly.com/question/1245771
#SPJ4
a plant consumes 100 kw of power at 0.9 pf lagging. if the load current is 200 a rms, find the load voltage.
The load voltage can be calculated using the formula: V = (Power / Power Factor) / Current. In this case, we substitute the given values to get: V = (100 kW / 0.9) / 200 A = 500 V.
What is the values ?Values are beliefs, customs, and practices which define how individuals and groups interact with one another. They are established standards of behavior that guide our interactions and decisions, and they can be either personal or shared. Values can include respect, honesty, fairness, responsibility, hard work, compassion, kindness, and cooperation. They provide a framework for making decisions, and they can help create a sense of purpose and meaning. Values can also help us find balance in our lives and can serve as a source of guidance when we need it.
The load voltage is:
V = (100 kW / 0.9) / 200 A = 500 V
To learn more about values
https://brainly.com/question/29663853
#SPJ1
Is red positive or negative DC?
In general, positive voltage is represented by red wires, whereas negative voltage is represented by black wires. Yet this is not the case.
Is red positive or negative DC?There will normally be two or three shielded wires when wiring for DC power. The coloring looks like this: The red current must be positive. It must be black for the negative current.
Is red cable positive or negative?Positive and negative cables are also included in the jumper cable set. The red one is positive (+), while the black one is negative (-). (-). Never connect the red cable to the negative battery terminal or a dead battery in a car.
To know more about positive or negative DC visit:-
https://brainly.com/question/15379637
SPJ4
Non-motorized vehicles are allowed on expressways.True or False
Non-motorized vehicles are allowed on expressways.The statement is false.
What is vehicles?Vehicles are machines used to transport people and goods from one place to another. They come in all shapes and sizes, from cars, buses, and trucks, to boats, planes, and even spacecraft. Vehicles have been around for centuries, and have been used for everything from military operations to leisurely travel.
Non-motorized vehicles such as bicycles and skateboards are not allowed on expressways due to safety concerns. The speed of expressway traffic and the lack of physical barriers between vehicles and the roadway make it too dangerous for non-motorized vehicles.
To learn more about vehicles
https://brainly.com/question/29522053
#SPJ4
determine if the airplane weight and balance is within limits. front seat occupants.............. 415 lb. rear seat occupants................ 110 lb. fuel, main tanks....................... 44 gal. fuel, aux. tanks........................ 19 gal. baggage..................................... 32 lb.
It should be noted that Weight within limits, CG out of limits
How to explain the weightWhen the weight of an aircraft is within the specified limits, but the CG (center of gravity) is out of limits, it can have significant implications on the aircraft's stability and control.
The CG location plays a crucial role in determining an aircraft's stability and handling characteristics. If the CG is too far forward, the aircraft may be difficult to rotate during takeoff, and it may be prone to nose-over on landing. On the other hand, if the CG is too far aft, the aircraft may be difficult to control in pitch and may be prone to stall or spin.
If the CG is out of limits, the aircraft's stability and control may be compromised, which could lead to an unsafe situation. Pilots should always ensure that the aircraft's weight and balance are within the specified limits before takeoff.
In such a situation, the aircraft may require corrective action to bring the CG back within the limits, such as moving weight forward or aft, depending on the aircraft's design and the location of the payload.
Learn more about weight on
https://brainly.com/question/229459
#SPJ1
which is the better heat pump a geothermal, air source, or water source heat pump?
It depends on your individual needs and the climate in which you live. Geothermal heat pumps are typically the most efficient and cost effective option, but they are not suitable for all locations.
What is geothermal?
Geothermal energy is a form of renewable energy that comes from the heat generated by the Earth's core. This energy is captured and used to generate electricity, provide heating and cooling, and to create hot water. Geothermal energy has relatively low environmental impact and can be used to meet most of our energy needs. It is a reliable, clean, and safe source of energy that can be used to reduce carbon emissions.
Air source heat pumps are more widely available and less expensive, but they are not as efficient and are limited by the outdoor temperature. Water source heat pumps are suitable for some climates and can provide more efficient cooling than air source units, but they may be more expensive to install and require a water source such as a pond or lake.
To learn more about geothermal
https://brainly.com/question/29647892
#SPJ1
Starting with x =0 at the left wall. Assume we measure the displacement at x=85 mm to be 0.71 mm and the displacement at x=215 mm to be 1.02 mm. Determine the average engineering strain in this section as a percentage. Put in the answer with three decimal places.
To determine normal strain ex' for x' a.xis.
Normal strain is the ratio of the length of the element before and after deformation. It is necessary to determine the distances between points before and after deformation.
What is the distance between points C and A?We calculate the distance between points C and A.
CA = 800*cos45° = 565.68542 mm
We calculate the distance between points C and A'.
CA' = 800*cos45° +5 = 570.68542 mm
Starting with x =0 at the left wall. Assume we measure the displacement at x=85 mm to be 0.71 mm and the displacement at x=215 mm to be 1.02 mm.
Therefore,Normal strain is the ratio of the length of the element before and after deformation. It is necessary to determine the distances between points before and after deformation.
Learn more about displacement on:
https://brainly.com/question/30087445
#SPJ1
When you grip a vehicle’s steering wheel with both hands, a couple moment is applied to the wheel.
Would older vehicles without power steering have larger or smaller steering wheels? What could be the reason having (larger or smaller) steering wheels?
Larger steering wheels were typically found on older, non-power steering automobiles. Larger steering wheels have a mechanical advantage over smaller ones, enabling drivers to turn with more force.
Why are steering wheels on new, contemporary cars smaller than those on older cars?A lower diameter allows for a more comfortable driving position as well as more space between the seat and the steering wheel.
Why does the steering on older automobiles seem loose?Over time, tie rods frequently sustain significant wear and tear. The tie rods are put to frequent use each time you turn your wheel, but they also serve as a major vibration absorber for the wheels.
To know more about automobiles visit:-
https://brainly.com/question/28992824
#SPJ1
Which of the following TWO choices would be TRUE characteristics of "democratic" systems of government?
Group of answer choices
Loyalty to a leader
Equal Opportunity
No Due Process
Limited Free Speech
Free and Open Elections
The TWO alternatives would be Genuine hallmarks of "democratic" forms of government: equal opportunity and free and open elections.
What are the two types of democracy that are most prevalent?The two types of democracy that are most prevalent now are representative democracy and indirect democracy. When citizens choose representatives to enact laws on their behalf, this is known as indirect democracy or representative democracy.
What two forms of democratic government exist?A representative democracy that upholds the rule of law and protects people's rights to their property is referred to as a liberal democracy. The ability of elected representatives to rule however they choose is weakly or not at all constrained in an illiberal democracy.
To know more about democratic visit:-
https://brainly.com/question/30189685
#SPJ1
The pier is made of material having a specific weight gamma The pier supports a constant load P at its top where its width is w1. If it has a square cross section, determine its width w as a function of z so that the average normal stress in the pier remains constant. Express your answer as an expression in terms of the variables w1,y, P, and z and any necessary constants.
The width of the pier as a function of z so that the average normal stress in the pier remains constant is given by: w(z) = w1 × √(1 + (z / z1)²)
What is Normal Stress?
Assuming that the pier is vertical and the load P is acting vertically downwards, the normal stress at a height z from the base of the pier can be given by:
σ(z) = P/A(z)
where A(z) is the cross-sectional area of the pier at height z. Since the pier has a square cross section, we have:
A(z) = w(z)²
where w(z) is the width of the pier at height z.
The weight of the pier itself also contributes to the load at each point. At a height z, the weight of the pier above that point is:
W(z) = γ × A(z) × z
where γ is the specific weight of the material used to build the pier. The total load at each point is therefore:
P(z) = P + W(z)
Substituting for A(z) and W(z), we get:
P(z) = P + γ × w(z)² × z
To keep the average normal stress in the pier constant, we need to ensure that the total load at each point remains constant. This gives us:
P + γ × w1² × z = P + γ × w(z)² × z
Simplifying and solving for w(z), we get:
w(z) = w1 × √(1 + (z / z1)²)
where z1 = w1² / (2 * γ) is a constant determined by the material properties and the width of the pier at its top. Therefore, the width of the pier as a function of z so that the average normal stress in the pier remains constant is given by:
w(z) = w1 × √(1 + (z / z1)²)
To know more about normal stress , visit:
https://brainly.com/question/17135312
#SPJ1
a reason why mvc may reject your road test vehicle is because there is a lack of examiner access to emergency brake or .
Answer:
A reason why MVC may reject your road test vehicle is that there is a lack of examiner access to the emergency brake or foot brake. The examiner must be able to reach the brake pedal from the passenger seat in case of an emergency.
Two cables BG and BH are attached to frame ACD as shown in the given figure. Knowing that the tension in cable BG is 540 N, determine the components of the force exerted by cable BG on the frame at B.
We cannot determine the components of the force exerted by cable BG on the frame at B without additional information.
To determine the components of the force exerted by cable BG on the frame at B, we need to resolve the force into its horizontal and vertical components.Let's consider the free-body diagram of point B, which is connected to cables BG and BH. The force exerted by cable BG can be resolved into horizontal and vertical components using trigonometry.The vertical component of the force exerted by cable BG is equal to T*sin(θ), where T is the tension in the cable and θ is the angle that the cable makes with the horizontal. In this case, we are not given the angle, so we cannot calculate the vertical component.The horizontal component of the force exerted by cable BG is equal to T*cos(θ), where T is the tension in the cable and θ is the angle that the cable makes with the horizontal. We know that the tension in cable BG is 540 N, but we are not given the angle, so we cannot calculate the horizontal component.To know more about cables visit:
https://brainly.com/question/13257527
#SPJ1
the following loop is syntactically valid. for (int j = 0; j < 1000; j ) j--; (T/F)
True, This loop activates j to 0 then evaluates it to 1000 without changing j for the course of the loop. In fact, once I grows too big to fit in memory, the loop will finally end with an operated error.
What three types of loops are all there?Loops are necessity to understand that repeat a specific chunk of code until a certain condition is satisfied or a specified number of times. There seem to be three main forms of loops in Visual Basic.
What does a program loop mean?A loop is a set of instructions which are repeatedly carried out until a specific condition is met in computer coding. Usually, a specific method is carried out, such as obtaining and altering a data set.
To know more about loop visit:
https://brainly.com/question/13868539
#SPJ4
what are used as top and bottom plates in metal wall framing.
There are two fundamental components of steel framing: tracks and studs. The top and bottom plates are held in place by the track.
Which stud is used to support the header on each side of the rough window opening?A header is a horizontal piece of framing that extends to the king stud on each side of the opening and is installed directly above the door or window opening. On either side of the opening, jack studs that are nailed in place next to the king stud support the header. Jack studs reach the wall's bottom plate.
What holds the top plate and bottom plate together?In terms of rooftop lift resistance, stud plate ties provide a general solution for connecting the stud to the top and bottom plates and assisting in the creation of a continuous load path. There are a number of products that are suitable for double top plates and studs, and these metal ties can be used to connect to either the top or bottom plate.
To know more about tracks visit :-
https://brainly.com/question/28234708
#SPJ4
what is the most important way that the engineering spirit helps advance the discipline?
the most important way that the engineering spirit helps advance the discipline that It encourages open-minded exploration.
What is the most crucial factor for engineers?Practically every area of engineering requires the ability to solve problems. Also, it is a skill that may be developed over time. So, make an effort to improve your problem-solving abilities at every step of your career.
Why is it so crucial for an engineer in the modern world to be knowledgeable in a variety of disciplines in addition to his area of specialization?You can better comprehend the scope of work by understanding the fundamentals of multidisciplinary engineering. You make lots of mistakes if you don't get this. While the borders of different disciplines do overlap, disputes between them can be settled. You can break deadlocks since you are aware of each discipline's responsibilities.
to know more about engineering spirit here:
https://brainly.com/question/14094488
#SPJ4
what is the adhesion between the tires and surface
Answer:
The stopping distance of a wheel is greatly affected by the interaction of the rotating tyre tread and the road surface. The relationship between the decelerating force and the vertical load on a wheel is known as the adhesion factor.
