Rusting is an electrochemical reaction. Iron rusts faster when alloyed with cobalt than when alloyed with manganese because, in the iron-manganese alloy, manganese is rendered the anode and iron is rendered the cathode
An alloy is a combination of two metals. There are various reasons for producing alloys such as greater tensile strength, corrosion resistance and improved aesthetic appearance.
When iron is alloyed with cobalt, the iron rusts faster than pure iron because iron is rendered the anode and cobalt is rendered the cathode. When the iron is alloyed with manganese, it rusts more slowly than pure iron because in the iron-manganese alloy, manganese is rendered the anode and iron is rendered the cathode.
Missing parts;
An iron object alloyed with cobalt rusts more quickly than a pure iron object. However, an iron object alloyed with manganese rusts less quickly than a pure iron object under the same conditions. This is true because
(1) cobalt is a stronger reducing agent than iron
(2) iron is a stronger reducing agent than manganese
(3) cobalt exhibits more metallic character than either iron or manganese
(4) in the iron-manganese alloy, manganese is rendered the anode and iron is rendered the cathode
(5) in the iron-cobalt alloy, cobalt is rendered the anode and iron is rendered the cathode
Learn more: https://brainly.com/question/14281129
Hurry Answer for a Brainlist
Answer:
The most accurate and percise player was Josh
how does the ribosome know the sequence of amino acids
Answer:
The ribosome contains three grooves which are sites for the tRNA. The first codon is AUG, which is called a "start codon". ... So, the tRNA that has the anti-codon sequence of UAC carrying the amino acid Met bonds to the mRNA codon. Another tRNA bonds to the next codon in the next groove with the next amino acid
I need helpppp pleaseeee!!
Answer:
Box#:
1:CoS
2:Co2S3
3:CoSO4
4:Co2(SO4)3
5:CoSO3
6:Co2(SO3)3
Explanation:
1:Co(II) is -2 and S is -2, so the charges cancel
2:Co(III) is -3 and is -2, so you cross the charges but do not reduce
3:Co(II) is -2 and SO4 is -2, so the charges cancel
4:Co(III) is -3 and SO4 is -2 so the charges cross but do not reduce
5:Co(II) is -2 and SO3 is -2 so the charges cancel
6:Co(III) is -3 and SO3 is -2 so the charges once again cross
Answer:
Cobalt (II) sulfide → CoS
Cobalt (III) sulfide → Co₂S₃
Cobalt (II) sulfate → CoSO₄
Cobalt (III) sulfate → Co₂(SO₄)₃
Cobalt (II) sulfite → CoSO₃
Cobalt (III) sulfite → Co₂(SO₃)₃
Methods used to separate heterogeneous mixtures include the following: check all that apply. *
Decanting
Filtration
Sifting
Answer:
Filtration, Sifting and Decanting
Explanation:
Heterogenous mixtures can be seperated by filtration and sifting (Also known as sieving). Sifting is the process of parting a mixture using a sieve. Sifting is used to separate solid mixtures that contain molecules of varying sizes. Filtration is the process of separating a liquid from an insoluble solid. A common example is using a funnel and a coffee filiter to seperate the liquide from the insoluable solid. Although there are many other methods for filtration. You can also separate mixtures by decantation. Decantation is the process of separating a liquid from a solid/liquid by removing the liquid layer at the top from the layer of solid/liquid below.
Sort the following elements in order from least reactive to most reactive.
A - Sb
B - S
C - F
D - As
Sorting the chemical elements in order from least reactive to most reactive, we have:
1. Fluorine (F).
2. Arsenic (As).
3. Antimony (Sb).
4. Silicon (S).
Given the following chemical elements:
Antimony (Sb).Silicon (S).Fluorine (F).Arsenic (As).Reactivity can be defined as a chemical property which determines how readily a chemical element bonds with other chemical elements, in order to form a new chemical compound.
Generally, the ability of a chemical element to bond with other chemical elements is largely (highly) dependent on the number of valence electrons it has in the outermost shell of its atomic nucleus.
As a general rule, chemical elements that are having fewer number of valence electrons are the most reactive while those having higher valence electrons are least reactive.
Also, chemical reactivity decreases down a group on the periodic table.
Based on the periodic table, the valency for the given chemical elements are:
Antimony (Sb): 5 valence electrons.Silicon (S): 4 valence electrons.Fluorine (F): 7 valence electrons.Arsenic (As): 5 valence electrons.In conclusion, sorting the chemical elements in order from least reactive to most reactive, we have:
1. Fluorine (F).
2. Arsenic (As).
3. Antimony (Sb).
4. Silicon (S).
Find more information: https://brainly.com/question/18214726
Using the information in the table, calculate the number of moles in a 7.89 kg sample of aspirin
(C9H8O4).
Write your answer using three significant figures.
Answer:
43.7mol
Explanation:
[tex]?mol = 7.86kg * \frac{1000g}{1kg} *\frac{1mol}{180g}[/tex]
Above is dimensional analysis method. Write what you are trying to find with the question mark and write your given info on the other side of the equal sign. Follow the units and pay attention to them cancelling out. You should have your answer unit by the end.
the 180g came from the table with masses times the chemical formula all added together. Below is exact formula.
hydrogen mass(hydrogen amount) + carbon mass(carbon amount) + oxygen mass(oxygen amount)
1g(8)+12g(9)+16g(4)=180g
180g is 1 mole of [tex]C_{9} H_{8} O_{4}[/tex]
How does a phase change from solid to liquid occur in a substance?(1 point)
Answer:
As heat is added to solid water, the temperature increases until it reaches 0 °C, the melting point. At this point, the phase change, added heat goes into changing the state from a solid to liquid. Only when this phase change is complete, the temperature can increase.
hope this helps
Heat is responsible for the change of phase from solid to liquid state.
A phase change from solid to liquid occur in a substance by heating of that substance because the bonds present between solid particles can be broken down with the help of heat energy.
When the bond is heat at the temperature on which it is broken down, the solid particles are converted into liquid substance so we can conclude that heat is responsible for the change of phase from solid to liquid state.
Learn more: https://brainly.com/question/25664350
the proton concentrations of three solutions at 25 °c are given. classify the solutions as acidic, basic, or neutral.
This problem is giving information about the proton concentrations of three solutions at 25 °C. Despite they are not numerically given, we can propose three scenarios to see how to approach the question.
Let the following solutions to come up:
[H⁺] = 2.63x10⁻³ M
[H⁺] = 1.00x10⁻⁷ M
[H⁺] = 4.511x10⁻⁹ M
The first step, will be the calculation of the pH for each solution via:
pH = -log([H⁺])
So that they turn out to be:
pH = -log(2.63x10⁻³ M) = 2.580
pH = -log(1.00x10⁻⁷ M) = 7.000
pH = -log(4.511x10⁻⁹ M) = 8.3457
In such a way, since acidic solutions have a pH below 7, neutral have a pH equal to 7 and basic have it above 7, we infer the first one is acidic, second one is neutral and third one is basic.
Thus, you can reproduce this methodology with the proton concentrations you are given.
Learn more:
https://brainly.com/question/23659500https://brainly.com/question/23428840assume you are performing the calibration step of experiment 8 and you begin with 80 g of water at 20 oc and 80 g of water at 80 oc. after adding the two portions of water into your calorimeter setup and following the procedure outlined in the experiment, you determine the temperature of the mixed portions of water to be 45 oc. what is the heat capacity of the calorimeter?
The heat capacity of the calorimeter is 133.76 J°/C.
A calorimeter is an apparatus employed when estimating the amount of heat required in a chemical reaction.
For the given calorimetric function:
the heat lost by the hot water = to the heat gained by the cold water and the calorimeter.These can be computed mathematically as:
[tex]\mathbf{m_wC_w\Delta \theta _w = m_cC_c\Delta \theta _c + C_{cal} \Delta_c}[/tex]
[tex]\mathbf{80 \ g\times 4.18 J/g^0 C \times (80-45)^0 \ C = 80 g \times 4.18\ J/g^0 \ \times (45- 20)^0 +C_{cal} \times (45- 20)^0 \ C}[/tex]
[tex]\mathbf{11704 \ J =8360 \ J+C_{cal} \times (25)^0 \ C}[/tex]
[tex]\mathbf{(11704 -8360) \ J= C_{cal} \times (25)^0 \ C}[/tex]
[tex]\mathbf{ C_{cal} = \dfrac{3344 \ J} { (25)^0 \ C}}[/tex]
[tex]\mathbf{ C_{cal} =133.76 \ J/^0 C}[/tex]
Therefore, the heat capacity of the calorimeter is 133.76 J°/C.
Learn more about calorimeter here:
https://brainly.com/question/10987564?referrer=searchResults
HELP!!!
Water boils in an open pot at 100 °C, but in a pressure cooker it can boil at 116 °C.
Describe what happens to the gas particles inside the pressure cooker as the pressure increases.
Explain whether the diagram Francisco drew is correct for the water particles in an open pot at 100 °C as well as those in the pressure cooker at 116 °C.
Identify which water particles have more energy, those in the open pot or those in the pressure cooker.
Explain why Francisco should use a pressure cooker to warm the jars of vegetables. Include a description of the behavior of the gaseous and liquid particles in the pressure cooker in your explanation.
PLEASE GIVE ME AN ANSWER TO EACH ONE IF YOU CAN.
Answer:
A pressure cooker looks like a regular pot but has a modified lid that locks on over a rubber gasket to create a seal. The cooker works by raising the temperature of boiling water, thereby speeding up the time it takes to boil, braise, or steam. To use a pressure cooker, you put the food in the pot with some liquid-usually a minimum of 2 cups to build up sufficient steam pressure. Once the lid is locked in place and the cooker is set on high heat, steam develops in the pot and can’t escape. The trapped steam increases the atmospheric pressure inside the cooker by 15 pounds per square inch (psi), or 15 pounds above normal sea-level pressure. At that pressure, the boiling point of water is increased from 212°F to 250°F. This higher temperature is what cooks food faster. Once the cooker has reached full pressure, usually indicated by a gauge or pop-up rod on the lid, a release valve opens, letting out steam in a regulated flow to maintain a constant temperature inside the pot.
Explanation:
in hydrogen iodide __________________ are the most important intermolecular forces.
Answer:
dipole-dipole forces
Explanation:
The important intermolecular force in hydrogen iodide HI is dipole- dipole forces. This force is arising due to the partial charge separation and permanent dipole moment.
What is dipole-dipole force?There are various intermolecular forces which binds two atoms chemically to form a compound. Ionic bonding, covalent bonding, dipole -dipole force, hydrogen bonding, Van der Waals force etc are some of them.
Dipoles are opposite charges separated by a small distance. Dipole -dipole force is generated between the atoms when they have partial charge separation and this creates a permanent dipole moment.
Hydrogen is an electropositive atom and iodine is slightly electronegative. This difference in electronegativities leads to the bonded electrons more attracted towards iodine result in partial charge separation and dipole-dipole force.
To find more on dipole-dipole forces, refer here:
https://brainly.com/question/14195217
#SPJ2
. Nếu dẫn 0,01 mol CO2 vào 50 ml dung dịch Ba(OH)2 0,1M thì sau phản ứng thuđược
A. BaCO3
B. Ba(HCO3)2
C. BaCO3 vàBa(HCO3)2
D. BaCO3 vàBa(OH)2
Distinguish between the first, second, and third ionization energies of an atom. b. How do the values of successive ionization energies compare
Answer:
The third ionization energy is the energy it takes to remove an electron from a 2+ ion. (That means that the atom has already lost two electrons, you are now removing the third.) And 2nd ionization energy is higher than 1st ionization energy, 3rd is higher than 2nd, and so forth.
hope it is helpful :)
How many molecules are in 25.3g of C2H4O
Answer:
0.57 molecules
Explanation:
balance equation for H2O+O2-H2O2
What is the relationship between temp./color and magnitude
(STARS)
Answer:
The surface temperature of a star determines the color of light it emits. Blue stars are hotter
hope this helps :)
ignore q above 6 NO LINKS and please answer all question 6-9 and parts
Where is the question?
una pieza de hierro de 25cm3 tiene una masa de 195g cual es su densidad?
Answer:
Pretend you are a TV producer. Think of ideas for new TV shows. Your objective is to create ideas that will be successful, regardless of whether this is quality programming or not. Think of an idea of a copy. Explain the basics of what this show will be like and what show it is copying. Explain why you feel this show will be popular. Think of an idea of a spin-off. Explain the basics of what this show will be like and what show it is spinning off from. Explain why you feel this show will be popular. Think of an idea for a TV show that falls into one of the genre categories listed in the genre chart. Describe the basics of the show and how it falls under the genre’s expectations for characters, plots, and aesthetics. Explain why you feel this show will be popular.
g. What is crystallization?Name any two go mixtures that can be separated by this method:name any two mixtures that can be separated by
crystallization is a process which helps to separate a pure solid from a solution in its crystal form. This is the in use to purify solid. For an example the salt we get from seawater can have many impurities in it. Hence, the process of crystallization is in use to remove these impurities.
Sugar and salt are examples of products where crystallization does not only serve as separation/purification technique, but where it is also responsible for getting crystals with the right size (and shape) for further application of the products.
- BRAINLIEST answerer
Answer:
Crystallization is the process by which a solid forms, where the atoms or molecules are highly organized into a structure known as a crystal. Some of the ways by which crystals form are precipitating from a solution, freezing, or more rarely deposition directly from a gas.
Sugar and salt are two mixtures that can be seperated by crystallization
Explanation:
Which class of macromolecule was described as being most like the hydrocarbons?.
Answer:
Fats........................
Lipids is the class of macromolecule was described as being most like the hydrocarbons.
what are Macromolecules ?Macromolecules are bigger molecules of large size and made of smaller molecules called as monomers, Polymers are macromolecules.
All Macromolecules are not like the hydrocarbon because the macromolecules not only consists of C and H atoms but also N and O.
Macromolecules are classified into 4 types
Proteins , Carbohydrates , Lipids and Nucleic Acids
Lipids is the class of macromolecule was described as being most like the hydrocarbons.
Lipids are a broad category of chemicals that are mostly nonpolar in nature.
This is due to the fact that they are hydrocarbons with nonpolar carbon–carbon or carbon–hydrogen bonds.
To know more about Macromolecules
https://brainly.com/question/15237842
#SPJ2
2. How many of valence electrons do the elements in column 4 have? Are these elements very reactive?
Explain your answer.
Answer:
4
Explanation:
Elements in group 14 have 4 valence electrons. Meaning that to achieve a stable octet they need to either gain or lose 4 electrons in total.
Which ions are isoelectronic with ar?.
Answer:
Isoelectronic means same electronic configuration as Ar. These are such as sulfide ion (S2− ), chloride ion (Cl− ) and phosphide ion (P3− ).
Explanation:
Any atom or ion with 18 electrons is isoelectronic with Ar. Some examples are:
Ca2+S2-Cl-What are isoelectronic?Isoelectronic atoms or ions refer to those that possess an identical number of electrons consequently sharing the same electron configuration. The term "isoelectronic" derives from the Greek words "isos " signifying "equal " and "elektron " denoting "electron".
It is worth noting that isoelectronic atoms or ions may exhibit varying atomic numbers and charges; nonetheless, their electron count remains constant.
Learn about isoelectronic here https://brainly.com/question/30014620
#SPJ6
how did JJ Thomson discovered the electron explain his plum pudding model of the atom
c. 0.0023 moles of CO2
Answer:
0.1gram
Explanation:
mass = no of moles × molar mass
I WILL GIVE BRAINLIST!!!!!!!!!! HELPPPPPP (Learning Newtons Law) A 0.5 kg tennis ball, a 2 kg basketball, and a 5 kg bowling ball are all falling at the same speed.
Which has more momentum?
A: the 0.5 kg tennis ball
B: the 2 kg basketball
C: the 5 kg bowling ball
D: the all have the same momentum
Hurry!!! Only got a couple mins!!!
The momentum of the bowling ball will be greater than the rest balls.
The correct answer to the question is Option C. The 5 kg bowling ball
Momentum is defined as the product of mass and velocity i.e
Momentum = mass × velocity
If we keep the velocity of the object constant, the momentum will depend on the mass of the object.
Thus, the higher the mass, the greater the momentum and the lesser the mass, the smaller the momentum.
From the question given above,
Mass of tennis = 0.5 Kg
Mass of basketball = 2 Kg
Mass of bowling ball = 5 kg
We can see that the bowling ball has a higher mass.
Therefore, the momentum of the bowling ball will be greater than the rest balls.
The correct answer to the question is Option C. The 5 kg bowling ball
Learn more: https://brainly.com/question/8695101
During secondary active transport, the movement of one substance down its electrochemical gradient provides the force to move another substance up its electrochemical gradient. When both substances move in the same direction the mechanism is referred to as a(n)
Given what we know about the mechanisms surrounding the biological movement of substances, we can confirm that when two substances in a secondary active transport move in the same direction, it is called a symport.
A secondary active transport harnesses the electrochemical energy generated by its movement of one substance, to aid the movement of the other. These movements can be of two types, depending on the directions:
AntiportSymportAn antiport transport will move both substances in opposite directions, meaning one out of the cell and one into the cell. The transport described in the question is that of a symport, given that it moves both substances in the same direction.
To learn more visit:
https://brainly.com/question/2503897?referrer=searchResults
measuring the isotopic composition of atmospheric co2 shows that the burning of fossil fuels has led to _____ co2 levels over the last 200 years.
Answer:
measuring the isotopic composition of atmospheric co2 shows that the burning of fossil fuels has led to the co2 levels over the last 200 years.
Explanation:
pa brainliest po ty
How many dozens of silver atoms are in the piece of jewelry?.
When a certain isotope, such as Pa-231, is hit by a neutron, it will always split into the same smaller nuclei.
true or false
Answer: false
Explanation:
Why are reforestation and reclamation important to environmental health?
Answer:
Reforestation can be used to undo and rectify the effects of deforestation and improve the quality of human life by absorbing pollution and dust from the air, rebuilding natural habitats and ecosystems,reducing global warming via biosequestration of atmospheric carbon dioxide, and harvesting for resources, particularly.
Explanation:
