Answer:
False
Explanation:
It is absolutely false that as the river's slope increases the power of the river to cause erosion usually decreases.
The right statement is vice versa because as the slope of the river increases, the ability of the river to cause erosion increases.
The slope of a river is its gradient. As the slope of a river increases so also is its erosive power. The erosive power of a river depends on gravity. As the river becomes more vertical, then the gravity effect increases. This increases the power the river has for erosion.Answer:
false
Explanation:
just cause its right and i took the test
Of the elements Pt, V, Li, and Kr, which is a nonmetal?
Would this be point D or point E? (Picture)
About Salva Chapter 14
1.Why isn’t Nya happy when the borehole water starts flowing?
2.How much time has now passed since Salva fled from his school?
3.What was life like in the Kakuma and Ifo refugee camps?How did they compare?
4.What does Salva mean when he thinks,”It was hard to keep hope alive when there was so little to feed it?”
5.Where does Salva finally find this hope?
Answer:
Because it is muddy and dirty.9 yearsDreadful / Compared The Ifo and Kakuma camps: Isolated areasThere was no way Salva could ever reach his goal of branching out into the world if he was stuck at the camp.When he hears that 3000 boys will be chosen to go to America.What is the anode of a galvanic cell made with zinc and aluminum?
O A. Aluminum ions
B. Zinc metal
O C. Aluminum metal
D. Zinc ions
Answer:
Aluminum Metal
Explanation:
A P E X states that it is Aluminum Metal 100% right
Scientists are always learning new things. Which of the following shows how
scientists use observations to gain new understanding about the world?
A. Scientists have discovered new planets orbiting a star by
detecting a wobble in the star's motion.
B. Scientists hope to learn more about how many stars are in space.
C. Scientists wonder if other planets can support life, and some
scientists wonder if there are aliens.
D. Scientists are familiar with some galaxies, but they do not know
how many galaxies exist.
Answer:
The answer is B
Can someone help me
Answer:
The longer it takes to orbit the sun.
Explanation:
Match each CDE with the correct category it falls into.
Answer:
evaluation
Explanation: Big brain
If you have 9.0x10^24 molecules of water, how many moles of water do you have?
Answer:
14.9 moles of water
Explanation:
Given data:
Number of molecules of water = 9.0×10²⁴ molecules
Number of moles of water = ?
Solution:
Avogadro number:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.
The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ molecules of water
9.0×10²⁴ molecules ×1 mol / 6.022 × 10²³ molecules
1.49×10¹ moles
14.9 moles
What happens when the dynamic equilibrium state of a system is disturbed by changing the conditions?
A. The position of the equilibrium shifts toward the reactants.
B. The equilibrium shifts to counteract that change.
C. The position of the equilibrium is maintained.
D. The equilibrium state is unable to reestablish.
Answer:
It covers changes to the position of equilibrium if you change concentration, pressure or temperature. ... If a dynamic equilibrium is disturbed by changing the conditions, the position of equilibrium moves to counteract the change
Explanation:
If a cake recipe requires 25g of sugar, how much sugar will the baked cake contain
PLEASE HELP ME, CHEMISTRY THANKS! :)
The density of water at 4.00°C is 0.967 g/mL. How many molecules of water are present in a 499.8 mL bottle of water? Express your answer to the correct number of significant figures. Be sure to show all steps completed to arrive at the answer.
Answer:
161.69×10²³ molecules
Explanation:
Given data:
Volume of water = 499.8 mL
Density of water = 0.967 g/mL
Number of molecules of water = ?
Solution:
First of all we will calculate the mass of water.
Density = mass/volume
0.967 g/mL = mass/499.8 mL
Mass = 0.967 g/mL × 499.8 mL
Mass = 483.3 g
Number of moles of water:
Number of moles = mass/molar mass
Number of moles = 483.30 g / 18 g/mol
Number of moles = 26.85 mol
1 mole contain 6.022×10²³ molecules
26.85 mol ×6.022×10²³ molecules / 1mol
161.69×10²³ molecules
Answer:
density of water at 4.00c is 0.967 g/mL. Volume of water=499.8mL
Mass of water=density x volume= 0.967 x 499.8=483.3066g
Number of moles of water molecules in given of water = givenmass/molarmass=483.3066/18=26.85
we know that 1 mole has 6.022 x 1023 molecules of water
so the number of water=6.022 x 1023 x 26.85=161.69 x 1023 =1.62 x 1025 molecules of water is its upto 3 significant figure.
Explanation:
A spaceship is traveling through space. Suddenly, its speed increases. What can
you say about the kinetic energy of the spaceship?
A. The kinetic energy increases as its speed increases.
B. The kinetic energy decreases as it is converted into speed.
C. The kinetic energy remains the same because speed and kinetic energy are not
related.
D.There is no way to know what happens to the kinetic energy.
Answer:
A. The kinetic energy increases as its speed increases.
Explanation:
The kinetic energy of an object is energy possessed by an object by virtue of its motion.
Now, kinetic energy of a moving body is given by;
KE = 1/2 mv^2
Where;
m = mass of the body
v = velocity (speed) of the body
It follows that if the mass of the spaceship is constant, a sudden increase in speed leads to a corresponding increase in the kinetic energy of the spaceship in accordance with the relationship show above.
Answer:
You'll speed up! A. Because the kinetic energy increases as its speed increases.
Explanation:
Elements that are most similarities are located in the same...?
Answer: In the same Group
Explanation: Elements in the same group (row going down) have the same number of valance electrons. These valance electrons dictate their chemical properties and how they react with other elements/compounds.
True or False:
All stars are the same color.
Answer:
False
Explanation:
They are not the same color since they do not all have the same temperature
Temperature defines their color
When 1000 C of charge is passed through CuSO4 solution, x g of copper is deposited. How much charge should be passed through the solution to deposit 5x g of copper?
Number of charge = 5018 C
Further explanationGiven
1000 C of charge for x grams of copper
Required
Number of charge
Solution
Faraday's Law :
[tex]\tt W=\dfrac{e.i.t}{96500}\\\\W=\dfrac{e.Q}{96500}[/tex]
For 1000 C, W = x grams
[tex]\tt x=\dfrac{1000.e}{96500}=0.0104e[/tex]
For 5x grams :
[tex]\tt 5x=\dfrac{e.Q}{96500}\\\\5\times 0.0104e=\dfrac{e.Q}{96500}\\\\Q=\dfrac{96500\times 5\times 0.0104e}{e}=5018~C[/tex]
For which each question , which box do I mark?
Answer:
A
B
A
B
B
Explanation:
B - MIXTURE
A - COMPOUND
solid to liquid change melting
Answer:
The process of a solid becoming a liquid is called melting. (an older term that you may see sometimes is fusion). The opposite process, a liquid becoming a solid, is called solidification. For any pure substance, the temperature at which melting occurs—known as the melting point—is a characteristic of that substance.
Hope this helps, have a wonderful day/night, stay safe, happy holidays, and merry christmas!
Help ASAP ......begdhzhshs
Answer:
thunderstorms
Explanation:
what happen if carbon is heated with oxygen?
what happens if magnesium is burnt in oxygen?
what happens if iron is heated with oxygen?
Answer:
abc
Explanation:
I need help help mee plea
ANSWER THIS QUESTION AS QUICK AS YOU CAN YOU WILL GET BRAINLY AND PIONTS PLEASE HELP ASAP!!!!!!!!!!!!!!!!!
Which of the following is NOT true about comparisons between analog and digital signals?
Question 3 options:
Digital signals are pulses of voltage that switch currents on an off in devices like computers.
Analog signals are used to convert sound waves into electronic signals.
Digital signals are more prone to distortion.
Analog signals are more prone to distortion.
Answer:
Explanation: Analog signal is continuous in nature as it is well defined for every specific time. More specifically, it is the one defined continuously for a range of values with time. These are represented as a sinusoidal waveform. The figure below represents an analog signal:
analog signal
As we can see here that the signal is continuous in nature as its every value is specified for each particular interval of time, thus, is referred as the continuous-time signal. For the purpose of recording the analog signals, the actual signal must be preserved as only in that case we can record the accurate analog signal.
However, whenever in any application there arises a need to change an analog signal into a digital one then through sampling this can be achieved. In the sampling technique, this signal is sampled at certain fixed time intervals and the sampled voltage is converted into digital values.
Definition of Digital Signal
A type of signal which is non-continuous in nature as it is defined only for a set of discrete times is known as a digital signal. More simply, we can say, it is specified at some particular time instants only. Thus, here the information is represented as a set of discrete values. The figure given below shows the signal representation in digital form:
digital signal
Here it is clear that the data is discretely positioned in time axis thus is shown in the form of bits i.e., 0 and 1. This means that here the signal performs the sudden transition between 0 and 1 where these two values correspond to the two voltage levels. For the purpose of recording the signals, in the digital one, only the samples of the actual signal are taken and not the whole signal.
Key Differences Between Analog and Digital Signal
Analog and digital signals are differentiated mainly on the basis of their way to carry the information. Analog signals represent the information as a continuous function of time. As against, digital signals are represented discretely at specific time intervals.
Analog signals deteriorate more easily than digital one as their susceptibility towards noise is higher.
The devices that operate on an analog signal need more power for transmission and reception than the devices that work on the digital signal.
The information represented by the analog signal is comparatively more accurate than the digital signal due to its continuous range of values.
Analog signals are transmitted at a slower rate than digital signals as the information holds more values thus is precise.
An analog signal is defined by the amplitude, phase, frequency, etc. While the digital signal is mainly associated with bit rate, bit intervals, etc.
The sinusoidal representation of the analog signal makes it difficult to understand or get decoded thus encryption is not required in analog signals. But as the digital signals are in the form of square waves, thus, it can be decoded easily hence need to be encrypted for secured communication.
On the basis of processing, it is said that the continuous nature of the signal offers easy processing of the analog signal. However, the discrete nature of the signal offers difficultly in the processing of the digital signal.
Conclusion
Thus, the above discussion concludes that due to the way of representing the signal, the two are differentiated. And because of this, the two types of signals possess different properties and are used in different applications. Like analog signals are used in radio wave transmission and reception whereas digital signals are used in the field of digital electronics.
How much thermal energy must be added to a 87.5 g sample of ice at -25oC completely melt the entire sample? As part of your work, sketch a labelled heating curve. Circle the portion of the curve that is the focus of this question.
Answer:
4.6 kJ
Explanation:
The energy required to raise the temperature of a substance from its initial temperature to a final temperature is given by:
Q = mcΔT
Where Q = energy, c = specific heat capacity of substance and ΔT = final temperature - initial temperature
Given that:
c = 2.1 kJ/kg°C, m = 87.5 = 0.0875 kg, ΔT = final temperature - initial temperature = 0 - (-25) = 25
Q = 0.0875 * 2.1 *25
Q = 4.6 kJ
Aqueous magnesium chloride is added to aqueous silver nitrate. A white precipitate forms. Write the chemical equation for this reaction.
Answer:
1. Molecular equation
BaCl2(aq) + 2AgNO3(aq) –> 2AgCl(s) + Ba(NO3)2 (aq)
2. Complete Ionic equation
Ba²⁺(aq) + 2Cl¯(aq) + 2Ag⁺(aq) + 2NO3¯ (aq) —> 2AgCl(s) + Ba²⁺(aq) + 2NO3¯(aq)
3. Net ionic equation
Cl¯(aq) + Ag⁺(aq) —> AgCl(s)
Explanation:
Answer:
The symbol for magnesium chloride is MgCl2 and silver nitrate is Ag(NO3)2 so the equation will be :
MgCl2 + Ag(NO3)2 → AgCl2 + Mg(NO3)2
8. When using the scientific notation system to express large numbers, move the_______
until____ digit(s) remain(s) to the left, then indicate the number of moves of the decimal point as the_______
9. When a measurement is recorded, it includes the_____
are certain plus one uncertain digit.
a. Major figures
b. Significant figures
c. Relative figures
d. Relevant figures
10.The ______is based on the lowest theoretical temperature, called______
a Kelvin scale, absolute zero
b. Celsius scale, absolute zero
c. Kelvin scale, boiling point of water
d. Centigrade scale, freezing point of water
Answer:
8. When using the scientific notation system to express large numbers, move the decimal until one digit(s) remain(s) to the left, then indicate the number of moves of the decimal point as the power of 10.
9. b. Significant figures.
When significant figures are used, the digits are certain plus one uncertain digit.
10. a Kelvin scale, absolute zero.
The Kelvin scale runs to absolute zero which is the lowest theoretical temperature. This measures 0 Kelvins on the Kelvin scale and −273.15°C on the Celsius scale.
Which statement best describes a primary occurrence in an uncontrolled fission reaction.
Incomplete question. Options;
A) Mass is created and energy is released.
B) Mass is created and energy is stored.
C) Mass is converted to energy, which is released.
D) Mass is converted to energy, which is stored.
Answer:
Mass is converted to energy, which is released
Explanation:
Basically, when uncontrolled nuclear fission (splitting) occurs, a radioactive atom (a mass) is split into two smaller nuclei leading to a continuous chain of fission reactions.
In other words, as the fission of the mass of the atom continues to occur, the mass is converted to energy, which is then released and more reactions occur.
A stretched out rubber band is an example of:
A. kinetic energy
B. potential energy
C. gravitational energy
D. light energy
what is the average atomic mass of einsteinium? what are its common isotopes?
Answer:
Boom
Explanation:
The bomb is big and it goes boom and it also creates nuclear fragments everywhere
What is the electron configuration for Ti (titanium)?
Explanation:
Titanium is an element found in the d-block group on the periodic table. It is a transition element.
To write the electronic configuration of an element, we must know the number of electrons in them;
In a titanium atom, we have 22 electrons;
Shell notation = 2 8 10 2
Orbital notation = 1s² 2s² 2p⁶ 3s² 3p⁶ 3d² 4s²
Answer: [Ar]4s^2 3d^2
Explanation:
Fill in the coefficients that will balance the following reaction: (Note: Use 1 as coefficient where appropriate.) C3H7OH+O2-- CO2 +H2O
The balanced equation :
2C₃H₇OH+9O₂⇒ 6CO₂ +8H₂O
Further explanationGiven
The following reaction(combustion of Propanol) :
C₃H₇OH+O₂⇒ CO₂ +H₂O
Required
Balanced equation
Solution
Equalization of chemical reactions can be done using variables. Steps in equalizing the reaction equation:
• 1. gives a coefficient on substances involved in the equation of reaction such as a, b, or c, etc.
• 2. make an equation based on the similarity of the number of atoms where the number of atoms = coefficient × index (subscript) between reactant and product
• 3. Select the coefficient of the substance with the most complex chemical formula equal to 1
1. Give coefficient
C₃H₇OH+aO₂⇒ bCO₂ +cH₂O
2. Make an equation
C, left=3, right=b⇒b=3
H, left=8, right=2c⇒2c=8⇒c=4
O, left=1+2a, right=2b+c⇒1+2a=2b+c⇒1+2a=2.3+4⇒1+2a=10⇒2a=9⇒a=9/2
The equation becomes
C₃H₇OH+9/2O₂⇒ 3CO₂ +4H₂O x 2
2C₃H₇OH+9O₂⇒ 6CO₂ +8H₂O
Can someone please help me and explain how to do this :')
How many moles of O₂ are needed to produce 3.17 mol of carbon monoxide from it's elements by a synthesis reaction?
Answer:
this is the answer explanation of previous question. as what you say in comment i do that
