The density of the SF₆ gas at the given pressure and temperature is 2.96 g/l.
The given parameters:
temperature of the SF₆ gas, T = 27 ⁰C = 273 + 27 = 300 Kpressure of the SF₆ gas, P = 0.5 atmThe molecular mass of the SF₆ gas is calculated as follows;
M of SF₆ = 32 + (6 x 19) = 146 g/mol
The density of the SF₆ gas is calculated by applying ideal gas law as follows;
[tex]PV = nRT\\\\PV = \frac{m}{M} RT\\\\PM = \frac{m}{V} RT\\\\PM = \rho RT\\\\\rho = \frac{PM}{RT}[/tex]
where;
[tex]\rho[/tex] is the density of the gasR is the ideal gas constant = 0.0821 L.atm/mol.K[tex]\rho = \frac{0.5 \times 146}{0.0821 \times 300} \\\\\rho = 2.96 \ g/l[/tex]
Thus, the density of the SF₆ gas at the given pressure and temperature is 2.96 g/l.
Learn more here:https://brainly.com/question/21912477
Omar rubs a balloon with wool, giving the balloon a
charge of -8.9x10-14 C. What is the force between
the balloon and a metal sphere that is charged to
25 C and is 2 km away?
Answer:
-8.9×10-14=-89-14=-103°C
25°C=2km
-103°C=? Less
=-103/25×2km
=-8.24km
Compare the amplitude of these waves.
help?
Answer:
The greater the amplitude of a wave then the more energy it is carrying.
Explanation:
E is carrying the most energy which means that it has the highest amplitude
A has the least energy because it has the lowest amplitude
which wave has a higher frequency and why?
Explanation:
the figure in the left side has higher frequency.
because it has more nos. of wave in 1sec.
PLEASE ANSWER THIS RIGHT ASAP
What is the correct definition of energy?
A: chemical changes
B: force × distance
C: both kinetic and potential energy
D: the ability to do work or cause change
Answer:
D: The ability to do work or cause change.
Explanation:
Energy can be defined as the ability to do work. We apply energy in basically everything we do in life, energy is needed to walk or move from one position to another, it is required to eat and do other basic things of life. The body system converts the food that is being consumed into energy, this energy can be switched from one form to another.
There are various forms of energy which include solar energy, wind energy, electrical energy, mechanical energy, kinetic energy, potential energy, etc. This form of energy can be converted from one form to another but cannot be destroyed.
Hope this helps :)
I will give a 5-star answer and Brainlest
Direct contact is necessary for which type of energy transfer?
A. Conduction
B. Sound Waves
C. Convection
D. Radiation
Answer:
D
Explanation:
Help me quick!!! please!!
Calculate the power of an engine which raises a mass of 1000 kg to a height of 40 m in 10 s.
Answer:
39.240 W
Explanation:
Let's start by calculating the work done by the engine. We can assume that it is the same work done by the weight of the object to bring it from 40m to the surface: as much energy it takes to bring it up, the same ammount it takes to bring it down. Said work is [tex]w= \vec F\cdot \vec{h} = mg h = 1000 \times 9.81\times 40 = 392.400 J[/tex]
At this point we can simply apply the definition of power, that is [tex]P = \frac wt[/tex], to get the power of the engine is [tex]39.240 W[/tex]
Answer:
P=39200W
Explanation:
P=(mgh)/t
P=(40×9.8×1000)/10
P=39200W
answer question 7 please
2. All objects contain both what and what charges.
Answer:
All objects are composed of these atoms. ... Charged objects have an imbalance of charge - either more negative electrons than positive protons or vice versa. And neutral objects have a balance of charge - equal numbers of protons and electrons.
Explanation:
When the sum of all the forces acting on a block.
Answer:
finish the question pls
Explanation:
lonic Naming Practice
Write the name of the following chemical compound:
Na3Cl1
Answer:
sodium chloride. .....
Where could light travel the easiest and fastest?
A) through air
B) through empty space
C) through liquid hydrogen
Explanation:
Light travels fastest through air
Answer:
try through air
Explanation:
State a hypothesis about your estimated daily water use.
Answer
Estimates vary, but, on average, each person uses about 80-100 gallons of water per day, for indoor home uses.
Explanation:
The wave height is equal to twice the _____.wave period wave height wave amplitude wave velocity wavelength
The wave height is equal to twice the amplitude of the wave.
The wave height of a wave of given wave with amplitude, period and wavelength is equal to twice the amplitude of the wave.
The amplitude of a wave is the maximum displacement of the wave, starting from the zero position of the wave. The wave height measures twice the maximum displacement of the wave.
Thus, we can conclude that the wave height is equal to twice the amplitude of the wave.
Learn more here:https://brainly.com/question/21431500
two objects are sitting 6m apart, one object has a mass of 100kg and the other has a mass of 200kg. what is the gravitational attraction between them
What is a thought experiment?
Answer:
A thought experiment is an experiment carried out only in the imagination
Explanation:
A particular roller coaster has a mass of 3500 kg, a height of 4.0 m, and a velocity of 12 m/s. What is the kinetic energy? If needed, use g= 10. m/s^2
Explanation:
given
m=3500kg,h=4.0m,v=12m/s
ke=½mv²
½×3500×12²=3500×144÷2
=252,000j or 252j
Please help! Question is attached.
Answer:
a. 6
b. 6 m/s²
c. 300 m to the right
d. 30 secs
Explanation:
slope = rise /run
60-0/10-0
= 6
b. slope = acceleration = 6 m/s²
c. d=ut+1/2at²
t=10 (segment A last for 10 secs)
u - initial velocity = 0
so d = 0(10)+1/2*6*10²
=300 m
30 POINTS!!! CAN U AWNSER IT?? :)
A space ship is cruising at 2,500.0 km/hr with the engines off. The engines fire for 8.00s
with a thrust of 45,450 N, bringing the ship up to its new speed of 2,750 km/hr. What is the mass of the ship? GOOD LUCK :)
Answer:
5235.84 kg
Explanation:
There is one theorem - whose proof I will never remember without having to drag calculus in there - that says that the variation of momentum is equal to the force applied times the time the application last.
[tex]F\Delta t = m \Delta v[/tex] As long as the engine isn't ejecting mass - at this point it's a whole new can of worm - we know the force, we know the variation in speed, time to find the mass. But first, let's convert the variation of speed in meters per second. The ship gains 250 kmh, [tex]\Delta v = 69.4 m/s[/tex];
[tex]45 450 \cdot 8 = 69.4 m \rightarrow m = \frac{45450\cdot 8}{69.4} = 5235.84 kg[/tex]
Describe at least two similarities between untraviolet rays and microwaves
What is the force that makes planets ring around it? ANSWER IT IF YOU ARE SMART
Answer:
gravitational force make the planet move around the sun on its orbit
Answer:
gravitational force makes planets orbit the sun
As an aeroplane decelerates, its kinetic energy decreases. Suggest what happens to this energy
they are converted into thermal and sound energy as well as the kinetic energy in the air
sports photographers often use large aperture, long focal length lenses. what limitations do these lenses impose on the photographs?
Answer:
The depth of focus achievable with those lenses is small.
Explanation:
A larger aperture makes it much harder to focus on more than one object. When using a telephoto lens (the ones the question is referring to), the depth of focus is very small. For example, using a telephoto lens to take a photo of a runner might get the runner in focus, but certainly not the track, or the audience behind them. If you look at photos, especially older photos, of Olympians in almost any sport you can see this.
Hope this helps!
How can magnets attract and repeal without touching each other?
Answer:
The hyperactivity of these electrons give magnets the ability to attract and repel
3. A mouse crawls 9 meters left in a tube, pauses and then crawls back 5 meters before
stopping. The entire trip took a total of 7 seconds.
a. What is the average speed of the mouse over these 7 seconds?
b. What is the average velocity of the mouse over these 7 seconds?
c. What was the instantaneous velocity of the mouse when it turned around?
Answer:
A
Explanation:
If it is loooking for a proper question, it wants to know how fast the mouse was going
Answer: The answer for this is A.
Explanation: I know this cause i'm smart and totally didn't copy the other guy just to get points
A 1,500 kg car’s speed changes from 30 m/s to 15 m/s after the brakes are applied. Calculate the work done onto the car from the brakes.
The work done onto the car is 506,250 J
The work done on a system implies an increase in the internal energy of the system as a result of some forces acting on the system from the outside.
From the parameters given:
The mass of the car = 1500 kgThe initial speed = 30 m/sThe final speed = 15 m/sThe work done onto the car refers to the change in the kinetic energy (i.e. ΔK.E)
[tex]\mathbf{=\dfrac{1}{2} mv_1^2 -\dfrac{1}{2} mv_2^2}[/tex]
[tex]\mathbf{=\dfrac{1}{2} m(v_1^2 - v_2^2)}[/tex]
[tex]\mathbf{=\dfrac{1}{2} \times 1500 \times (30^2 - 15^2)}[/tex]
= 506,250 J
Therefore, we can conclude that the work done on the car is 506,250 J
Learn more about work done here:
https://brainly.com/question/18762601
A group of waves is propagated at a speed that is ________ the speed of the individual waves in deep water.
explain properties and importance of light and how it separates into colours
Answer:
White light can be separated into different colors using a special lens called a prism. As visible light passes from air into the glass, the change in medium causes a change in direction and speed. Refraction causing the separation of white light into its various color wavelengths is called dispersion.
hope this helps
A falling object with a weight of 15N is moving downwards towards earth at a steady speed. What is the size of the drag force on this object?
Answer:
15 N :D
Explanation:
The size of the drag force on this object falling at a constant speed is determined as 15 N.
Drag force on the objectThe drag force on the object is determined by calculating the net force on the object;
F(net) = W - D
where;
W is weight of the objectD is the drag force of airma = W - D
at constant speed, acceleration, a = 0
0 = W - D
W = D
15 N = D
Thus, the size of the drag force on this object falling at a constant speed is determined as 15 N.
Learn more about drag force here: https://brainly.com/question/15237524
#SPJ2
an acorn falls from a tree. ignoring air resistance, what forces are on the acorn while it’s falling?
Answer: gravity
Explanation:
Which jet stream affects weather In South Africa?
Answer:
The low-level easterly African jet stream is considered to play a crucial role in the southwest monsoon of Africa, and helps form the tropical waves which move across the tropical Atlantic and eastern Pacific oceans during the warm season.
Explanation:
