Answer:
The magnitude and direction of the earth's magnetic field is between the range of 0.25 to 0.65 Gauss considering the angle of the earth's north pole is eleven degrees.
Explanation:
The magnetic field or force of the earth is attributed to a dynamo effect but the electric charges are not constant. The origin of the field is believed to be from the molten metallic core and the earth's rotation.
The Force of the magnetic field is a function of the velocity or speed 'v' of the electric charges 'q' and the field itself 'B' at an angle of sin∅. That is,
F = vqBsin∅
Im yess hi sksksks sm and then ríndalos dndk
You have to travel 5000 meters. You only have two minutes (120 seconds) to get there. How fast must you travel to get there in time in meters per second?
Answer:
416.667 m/s
Explanation:
divide the distance by the time
If the magnitude of a vector is√8 .If it's x-component is 2 ,then it's y- component is
Answer:
The answer is below
Explanation:
A vector quantity is a quantity that has both magnitude and direction. The magnitude of a vector is the length of that vector.
The magnitude of a vector a with a x component of x and y component of y is given by the formula:
[tex]|a|=\sqrt{x^2+y^2}[/tex]
Given that the vector has a magnitude of √8, the x component is 2 and the y component = y. Hence:
[tex]\sqrt{8}=\sqrt{2^2+y^2}\\\\squaring\ both\ sides:\\\\8=4 + y^2\\\\y^2=8-4\\\\y^2=4\\\\square\ root\ of\ both\ sides:\\\\y=\sqrt{4} \\\\y=\pm 2\\\\y=+2\ or\ y=-2[/tex]
A clown in a circus act swings a 2.7-kg metal ball attached to a 72.0-cm nylon string in a horizontal circle above her head, making one revolution in 0.98 s. What is the tension force, Ft, exerted on the string by the ball?
Answer:
Tension, Ft = 79.91 N
Explanation:
The tension in the string is the resultant force that exists in the string due to the centripetal effect of the swinging ball.
From conservation laws, the tension in the string will be equals to the centripetal force acting on the string.
The tension in a string can be obtained using the formula:
[tex]T=mv^2/R[/tex]
where v = linear velocity of the metal ball which equals to the angular velocity of the ball X the radius of the ball.
The radius of the ball is given as 72 cm = 0.72m and the angular velocity = 1.02 rad/second.
Therefore, linear velocity, [tex]v = 2\pi \times 1.02\times 0.72 =4.616m/s[/tex]
The tension in the string will now be equals to [tex]2.7 \times 4.616^2 /0.72 =79.91N[/tex]
Robin throws a penny up in the air. If the penny's initial velocity is 1.0m/s[up] and it is launched from a height of 1.5 m, what is the maximum height of the penny above the ground?
Answer:
1.55m
Explanation:
The formula for calculating the maximum height is expressed as;
H = u²/2g
u is the initial velocity
g is the acceleration due to gravity
Substitute
H = 1²/2(9.8)
H = 1/19.6
H = 0.051m
Since it is launched form a height of 1.5m, the height above the ground will be 1.5+0.051 = 1.55m
Which star is closest to our solar system (after the Sun)?
Alpha Centauri A
The two main stars are Alpha Centauri A and Alpha Centauri B, which form a binary pair. They are an average of 4.3 light-years from Earth. The third star is Proxima Centauri. It is about 4.22 light-years from Earth and is the closest star other than the sun
Have a nice Day , Hope this helped you I would appreciate it if you could mark my answer brainliest
Answer:
The answer is A
What is the MAIN idea of the section "Green Loses Its Power In Fall"?
A 120 -kg crate accelerates toward the positive x-direction . If the magnitude of the force due to friction is 74.4 N , what force must pull on the crate to give it a 2.5 m/s ^ s acceleration ?
Answer:
The applied force to accelerate the crate is 374.4 N
Explanation:
Given;
mass of the crate, m = 120 kg
magnitude of force due to friction, Fk = 74.4N
acceleration of the crate, a = 2.5 m/s²
The net horizontal force on the crate is calculated as;
∑Fx = F - Fk
ma = F - Fk
F = ma + Fk
where;
F is the applied force to accelerate the crate by 2.5 m/s²
F = (120 x 2.5) + (74.4 N)
F = 300 N + 74.4 N
F = 374.4 N
Therefore, the applied force to accelerate the crate is 374.4 N
A 0.050 kg golf ball leaves the tee at a speed of 75.0 m/s. The club is in contact with the
ball for 0.020 s. What is the net force of the club on the ball?
The ball accelerates from rest to 75.0 m/s in a matter of 0.020 s, so the drive applies an (average) acceleration of
a = (75.0 m/s - 0) / (0.020 s) = 3750 m/s²
Assuming this acceleration was constant, then the net force F on the ball is
F = (0.050 kg) (3750 m/s²) = 187.5 N ≈ 190 N
the steps of mieosis
Answer:
Since cell division occurs twice during meiosis, one starting cell can produce four gametes (eggs or sperm). In each round of division, cells go through four stages: prophase, metaphase, anaphase, and telophase.
Answer:
here are six stages within each of the divisions, namely prophase, prometaphase, metaphase, anaphase, telophase and cytokinesis
Explanation:
The sun shines equally on both hemispheres during the summer and winter solstices.
True
False
Ya sabes que los materiales se utilizan dependiendo de la fun- ción que deben tener: transparentes (cristales), conductores de la electricidad (cables de tendidos eléctricos), muy resistentes (vigas), inoxidables (cuberterías), etc. Pero, ¿interesarán materiales de densidad grande o pequeña? ¿Por qué? Busca ejemplos de tres materiales que justifiquen tu respuesta (por ejemplo, el hilo conductor de las líneas de alta tensión, los colchones de espuma de alta densidad, la fibra de carbono, etc). ¿Qué características tiene la fibra de carbono en cuanto a resis- tencia y densidad? Busca objetos que se elaboren con fibra de carbono.
We work in less time.
3.
Differentiate between:
a)
Work and energy
b)
Work and power
c) Kinetic energy
Kinetic energy and potential energy
Work from burning fuel and work from moving objects
d)
110
Answer:
1 work is scalar quantity
2 it si unit of work is joule
3The equation of caculate is work= Force× Displacement
1 power is scalar quantity
2 it si unit of power is watt
3 the equation of calculateis power= work \time
help please 10 pts and quick!
can someone write me a short response
Answer:
Explanation:
Pecan 1 and 4 seem the best answer
Which statement illustrates how progress in engineering has affected the natural environment? (O A. Engineers continue to make design improvements to solar panels, making them ever more efficient in providing electricity. O B. The development of new solar panel technology drives the development of battery technology. O C. Engineers have developed solar energy technology that reduces the need for other sources of energy that can pollute the atmosphere. (® D. As solar energy technology continues to improve, it is becoming a more attractive source of energy than sources that use fossil fuels.
Explanation:
sorry but Oz is the option or anything else can clarify
Engineers have developed solar energy technology that reduces the need for other sources of energy that can pollute the atmosphere. So, option C.
What is meant by solar energy ?Solar energy is defined as the solar radiation that has the potential to ignite chemical processes, produce heat, or generate electricity.
Here,
In order to protect wildlife, and ecosystems, it is imperative that greenhouse gas emissions are reduced and climate change is mitigated. Solar energy plays a significant part in this as a renewable source of energy.
Additionally, solar energy can reduce water use in energy production and enhance air quality.
An extremely crucial factor considering the scarcity of water is that solar energy does not produce waste or contaminate water. Wind energy is essential for preserving hydrological resources because it consumes among the least amounts of water compared to fossil fuels and nuclear power facilities.
Hence,
Engineers have developed solar energy technology that reduces the need for other sources of energy that can pollute the atmosphere. So, option C.
To learn more about solar energy, click:
https://brainly.com/question/9704099
#SPJ2
A student pulls a 50-newton sled with a force having a magnitude of 15 newtons. What is the magnitude of the force that the sled exerts on the student?
Answer:
Force = 35 N
Explanation:
From Newton's third law of motion, the boy must apply a force greater than the weight of the sled to lift it.
weight of sled = mg
where m is its mass and g the force of gravity on it.
weight of sled = 50 N
Force applied by the boy on the sled = 15 N
Since the force applied on the sled by the boy is lesser than the weight of the sled, then;
Force that the sled exerts on the student = 50 - 15
= 35 N
The force exerted by the sled on the student is 35 N.
Please help in these 4 questions
Answer:
See the answers below.
Explanation:
1
The data of 100W means power, and the other data of 220V means voltage, that is to say that bulb serves to work at a voltage of 220V100W datum means power.
J means work that is given in Joules [J], we must remember that power is defined as the relationship between work at a certain time, therefore we can determine work by means of the following expression.
[tex]P=W/t\\[/tex]
where:
P = power [Watt]
W = work [J]
t = time [s]
[tex]W=P*t\\W=100*5[hr]*[\frac{3600s}{1hr} ]\\W=1800000[J] = 1.8[MJ][/tex]
Now the electric cost.
[tex]0.1[kW]*5[hr]*55\frac{LL}{1kwhr} =27.5[LL][/tex]
2
We know that power is defined as the product of voltage by resistance.
[tex]P=V*I[/tex]
where:
P = power [W]
V = voltage [V]
I = current [amp]
[tex]I=P/V\\I=1500/220\\I=6.82[amp][/tex]
3
The voltage can be calculated by means of ohm's law, which tells us that the voltage is equal to the product of resistance by the current.
[tex]V =I*R[/tex]
where:
V = voltage [V]
I = current = 20 [mA] = 0.02 [A]
R = resistance = 20 [kΩ] = 20000 [Ω]
Now replacing:
[tex]V = 0.02*20000\\V = 400 [V][/tex]
4
According to the figure we see that when the current is equal to 10 [mA] the voltage is equal to 1 [V]. With these two values, we can use ohm's law and find the value for the resistance.
[tex]V = I*R\\R = V/I\\R = 1/0.01\\R =100 [ohm][/tex]
A container of gas is held at a constant volume. Which will most likely happen to the temperature if the pressure of the gas increases?
The temperature will increase at the same rate as the pressure increases.
The temperature will decrease at the same rate as the pressure increases.
The temperature will increase at half the same rate as the increase in pressure.
The temperature will decrease at half the same rate as the increase in pressure.
Answer:
With more particles there will be more collisions and so a greater pressure. The number of particles is proportional to pressure, if the volume of the container and the temperature remain constant. ... This happens when the temperature is increased.
Explanation:
Assuming the gas to be an ideal gas, the temperature will increase at the same rate as the pressure increases.
Ideal gas:Let us assume that the gas in the container is an ideal gas. Then from the ideal gas equation, we get that:
PV = nRT
where P is the pressure of the gas
V is the volume
T is the temperature
n is the number of moles of the gas
R is the universal gas constant
Now, it is given that V is constant, R is already a constant, and n will also be constant, since the number of moles of gas in the container is not changing, so:
P = nRT/V
P = constant × T
P/T = constant
This means that the temperature will increase at the same rate as the pressure increases.
Learn more about ideal gas:
https://brainly.com/question/14934878?referrer=searchResults
what is the relation between distance and speed
by the formula
s=d/t
speed=distance/time
the bigger the distance that has been traveled over a period of time the bigger the speed
Speed = Distance / Time
If time is held constant, then speed is directly proportional to distance. If distance is held constant and time varies, then the speed is inversely proportional to the time taken.
reaction takes place that is expected to yield 171.9 g of product, but only yields 154.8 g. What is the percent error for this experiment?
Answer:
9.95 percent
Explanation:
To get the percentage error, we use the following formula:
Percentage error = (expected output- actual output)/expected output X 100
Where
expected output: This is the mass of the end product after the chemical reaction that was expected = 171.9g
actual output: This is the mass of the end product after the chemical reaction that was observed = 154.8 g
Percentage error = [tex]\frac{171.9-154.8}{171.9} X 100= 9.95 percent[/tex]
Therefore the percentage error in the experiment is 9.95 percent.
The percent error for this experiment in which the reaction takes place to yield 171.9 g of product is 9.95%.
What is percentage of error?The difference between the measured or calculated value during the experiment or calculating and the known value is called the error. The percentage of error is the 100 times of this difference when divided with known value.
The expected value of the reaction to yield is 171.9 g of product. The experimental value of the reaction to yields is 154.8 g of product.
Thus, the percent error for this experiment
[tex]P=\left(\dfrac{171.9-154.8}{171.9}\right)\times100\\P=9.95\%[/tex]
Thus, the percent error for this experiment in which the reaction takes place to yield 171.9 g of product is 9.95%.
Learn more about the percentage of error here;
https://brainly.com/question/10218601
What is the distance between a 2000 kg truck and a 3000 kg truck if the gravitational force between them is 0.00006 N?
A 258
B. 567 m
C 981
D. 15
Answer:
A. 2.58m
Explanation:
Using the formula;
F = GMm/r²
M and m are the masses
G is the gravitational constant
r is the distance between the masses
Substitute
0.00006 = 6.67*10^-11(2000)(3000)/r²
0.00006r² = 6.67*10^-11*6000000
0.00006r² = 40.02*10^-5
0.00006r² = 0.0004
r² = 0.0004/0.00006
r² = 6.66
r = 2.58m
Hence the distance between them is 2.58m
What does dalton theory have in common with democritus
Answer:
Democritus and Dalton has similar ideas about the atom, but Democritus based his theory more on reason than science. ... His ideas were similar to those of Democrites in that he believed that atoms were indivisible and that atoms of one substance are all alike but are different from atoms of another substance.
Explanation:
PLS MAKE ME AS BRAINLIST
Answer:
Democritus and Dalton has similar ideas about the atom, but Democritus based his theory more on reason than science. ... His ideas were similar to those of Democrites in that he believed that atoms were indivisible and that atoms of one substance are all alike but are different from atoms of another substance.
Explanation:
The two equal strong kids are having a tug a war. What do you expect to happen to the ball in this situation
Answer:as per as Newtons second law, The forces exerted on the rope create tension.
As such,The tension is equal to the applied force.The tension is trasmitted to the opposite side and of the rope delivering the applied force.
Hope this helps.. :)
question is attached!
Answer:
For Bill to dump the water on Tim, Tim should be 7.232 meters from the tree when Bill dumps the water
Explanation:
The given height above the ground at which Bill sits on the tree branch with a bucket of water, h = 4.0 meters
The speed with which Tim is approaching the tree = 8.0 meters per second
The time , t, it will take for the bucket of water to reach the ground is given by the equation of free fall as follows;
h = 1/2·g·t²
Where;
h = Height = 4.0 m
g = The acceleration due to gravity ≈ 9.8 m/s²
t = The time
Making t the subject of the above equation gives;
t = √(h/(1/2·g))
Substituting the known values gives;
t = √(4.0 m/(1/2 × 9.8 m/s²)) ≈ 0.904 s
t ≈ 0.904 seconds
Therefore, for Bill to dump the water on Tim, it should take Tim approximately 0.904 seconds to get to the tree
The distance, d, Tim will be when it will take him 0.904 seconds to get to the tree is given from the kinematic equation of speed, s, as follows;
Distance, d = Time, t × Speed, s
Where;
d = The distance
t = The time = 0.904 s
s = The speed with which Tim is approaching the tree = 8.0 m/s
Substituting the values gives;
d = 0.904 s × 8.0 m/s = 7.232 m
Therefore, the distance Tim should be when Bill throws the water = 7.232 meters
John is pushing (horizontally) on a 100 kg (Fw = 980N) bench with an unknown force. If the coefficient of static friction is 0.20 and the acceleration is 1.84m/s/s, what is the applied force?
Answer:
1176N
Explanation:
Given parameters:
Mass of bench = 100kg
Forward force = 980N
Coefficient of static friction = 0.2
Acceleration = 1.84m/s²
Unknown:
Magnitude of the applied force =?
Solution:
Frictional force is a force that opposes motion, for a body to move, the applied force must be greater than the frictional force;
The Force applied;
Force applied = Frictional force + Weight of the body
Frictional force = umg
u is the coefficient of static friction
m is the mass
g is the acceleration due to gravity
Force applied = 0.2 x 100 x 9.8 + 980 = 1176N
HELP ASAP!!!! WILL GIVE BRAINLIEST!
What are the functions of ribosomes, the endoplasmic reticulum, vesicles, and the Golgi apparatus?
Ribosomes, endoplasmic reticulum, vesicles, and the Golgi apparatus are the organelles present in the eukaryotic cell. They are involved in various roles and functions involving proteins.
What are the functions of the organelles?Ribosomes are the organelles involved in the transcription and translation process to synthesize proteins and transport them from ER to the vesicles. The endoplasmic reticulum (ER) is a membraneous structure that along with ribosomes is involved in lipid and protein synthesis.
The proteins synthesized from ER are transported to the Golgi body through the vesicles. They even eliminate the waste from the cell. The Golgi apparatus receives proteins from ER and then packs, modifies, and transports them to the target location.
Therefore, the ER, ribosomes, Golgi, and vesicles are involved in protein synthesis and transportation.
Learn more about cell organelles, here:
https://brainly.com/question/14798609
#SPJ2
A light bounces off the surface of a metal cup and shines in Harold’s eyes. Which best describes what is happening to the light waves in this scenario?
absorption
interference
refraction
reflection
Answer:
Reflection
Explanation:
Reflection is the change in direction of a wavefront at an interface between two different media so that the wavefront returns into the medium from which it originated. Common examples include the reflection of light, sound, and water waves.
Answer:
d
Explanation:
A physicist drops astone off the top of cliff over looking a lake. She hears the splash 4 second after releasing the stone?
Answer:
Height of cliff(h) = 80 meter (Approx)
Explanation:
Given:
Time taken t = 4 sec
Gravitational acceleration = 10 m/s (Approx)
Find:
Height of cliff(h)
Computation:
h = ut + 1/2(g)(t)²
Height of cliff(h) = (0)(4) + 1/2(10)(4)²
Height of cliff(h) = 80 meter (Approx)
How does a decrease in thermal energy affect the kinetic energy of the particles in each state of matter?
Answer:
kinetic and potential energy). The opposite is true when you remove thermal energy: Particles move slower (less kinetic energy). Particles get closer together (less potential energy)
Answer:
Explanation:
kinetic and potential energy). The opposite is true when you remove thermal energy: Particles move slower (less kinetic energy). Particles get closer together (less potential energy).
Does this make sense??-
A ship is travelling due east at 30 km/hr and a boy runs across the deck
in a south west direction at 10 km/hr. Find the velocity of the boy
relative to sea.
Answer:
Vr = 20 [km/h]
Explanation:
In order to solve this problem, we have to add the relative velocities. We must remember that velocity is a vector, therefore it has magnitude and direction. We will take the sea as the reference measurement level.
Let's take the direction of the ship as positive. Therefore the boy moves in the opposite direction (Negative) to the reference level (the sea).
[tex]V_{r}=30-10\\V_{r}=20 [km/h][/tex]
