The energy of 1 mole of photons of light with a wavelength of 626.3 nm is approximately 3.17 × 10^(-19) J.
To determine the energy for 1 mole of photons of light with a wavelength of 626.3 nm, we can utilize the equation E = hc/λ, where E represents the energy of a single photon, h is Planck's constant (6.62607015 × 10^(-34) J·s), c is the speed of light (2.998 × 10^8 m/s), and λ is the wavelength of the light in meters. First, we need to convert the given wavelength of 626.3 nm to meters. This can be achieved by dividing the wavelength by 10^9, resulting in λ = 6.263 × 10^(-7) m. Next, substituting the values into the equation, we can calculate the energy of a single photon:
E = ((6.62607015 × 10^(-34) J·s) * (2.998 × 10^8 m/s)) / (6.263 × 10^(-7) m)
This calculation provides us with the energy per photon. To determine the energy for 1 mole of photons, we multiply this value by Avogadro's number (6.02214076 × 10^23).
E = ((6.62607015 × 10^(-34) J·s) * (2.998 × 10^8 m/s)) / (626.3 × 10^(-9) m)
Calculating the value of E using the given values:
E ≈ 3.17 × 10^(-19) J
To learn more about photons, Click here:
https://brainly.com/question/29409292
#SPJ11
Starting from rest, a child zooms down a frictionless slide from an initial height of 2 m. What is her speed at the bottom of the slide
The child's speed at the bottom of the slide can be determined using the principle of conservation of mechanical energy. The speed at the bottom of the slide is approximately 6.26 m/s.
The principle of conservation of mechanical energy states that the total mechanical energy (sum of kinetic energy and potential energy) remains constant in the absence of external forces. Since the slide is frictionless, there is no loss of mechanical energy.
At the top of the slide, the child possesses potential energy, given by
PE = mgh, where m is the mass of the child, g is the acceleration due to gravity, and h is the initial height. As the child slides down, the potential energy is converted into kinetic energy, given by KE = (1/2)mv^2, where v is the speed at the bottom.
By equating the initial potential energy to the final kinetic energy, we can solve for v. Substituting the values, the speed at the bottom of the slide is approximately 6.26 m/s.
learn more about conservation click here;
brainly.com/question/9530080
#SPJ11
A positive charge 2Q is located at point -3 m from the origin. What is the sign and size of the second charge Q located at point 2 m from the origin, if the electric potential at the origin is zero
A positive charge 2Q is located at point -3 m from the origin. The second charge Q located at point 2 m from the origin must have a size of zero (Q = 0). This indicates that there is no charge present at that location.
To determine the sign and size of the second charge Q located at point 2 m from the origin, we can use the concept of electric potential and the principle of superposition.
Given that the electric potential at the origin is zero, we can consider the electric potential due to the two charges individually and then combine them.
Let's denote the electric potential due to the charge 2Q at the origin as V1 and the electric potential due to the charge Q at the origin as V2.
Since the electric potential at the origin is zero, we have:
V1 + V2 = 0
The electric potential due to a point charge can be calculated using the equation:
V = k× (Q / r)
where V is the electric potential, k is the electrostatic constant (approximately 9.0 x 10^9 N·m^2/C^2), Q is the charge, and r is the distance from the charge.
For the charge 2Q located at -3 m from the origin, the electric potential at the origin (V1) is given by:
V1 = k × (2Q / 3 m) = (2/3) × kQ
For the charge Q located at 2 m from the origin, the electric potential at the origin (V2) is given by:
V2 = k × (Q / 2 m) = (1/2) × kQ
Substituting these values into the equation V1 + V2 = 0:
(2/3) × kQ + (1/2) × kQ = 0
Combining the terms:
(4/6) × kQ + (3/6) × kQ = 0
(7/6) × kQ = 0
To satisfy this equation, the only possible solution is Q = 0.
Therefore, the second charge Q located at point 2 m from the origin must have a size of zero (Q = 0). This indicates that there is no charge present at that location.
To learn more about electric potential visit: https://brainly.com/question/14306881
#SPJ11
A portable radio connected to a 9.0 V battery draws a current of 25 A. What is the resistance o the radio
The resistance of the radio is 0.36 Ω. The portable radio connected to a 9.0 V battery draws a current of 25 A. To calculate Resistance of the radio. We know the Ohm's Law: V = I × R where, V is the voltage, I is the current, and R is the resistance of the circuit.
Arranging the equation, we get R = V / IGiven,
V = 9.0 VI = 25 A
Substituting the values in the above equation,
we get:R = 9.0 V / 25 AR = 0.36 Ω
Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points. Introducing the constant of proportionality, the resistance, one arrives at the usual mathematical equation that describes this relationship V = I × R
Therefore, the resistance of the radio is 0.36 Ω.
Learn more about resistance at
https://brainly.com/question/29427458
#SPJ11
An airplane is heading north at an airspeed of 600 km/hr, but there is a wind blowing from the southwest at 70 km/hr. How many degrees off course will the plane end up flying? (Round your answer to three decimal places.)
Therefore, the airplane will end up flying approximately 5.116 degrees off course due to the wind.
To determine the angle off course, we can use vector addition. Let's consider the airplane's velocity vector and the wind velocity vector as vectors in a two-dimensional plane.
The airplane's velocity vector points north with a magnitude of 600 km/hr. We'll denote it as A.
The wind's velocity vector blows from the southwest, which is a direction 45 degrees south of west. We'll denote it as W, with a magnitude of 70 km/hr.
To find the resultant velocity vector R, which represents the actual velocity of the airplane, we can add vectors A and W.
By decomposing vector W into its north and west components, we can determine the effect of the wind on the airplane's heading.
The north component of W is given by: [tex]W_{north}[/tex] = W × cos(45°)
[tex]W_{north}[/tex] = 70 × cos(45°) = 70 × 0.7071 ≈ 49.497 km/hr (rounded to three decimal places)
The west component of W is given by: [tex]W_{west}[/tex] = W × sin(45°)
[tex]W_{west}[/tex] = 70 × sin(45°) = 70 × 0.7071 ≈ 49.497 km/hr (rounded to three decimal places)
Now, let's subtract the westward wind component from the northward airplane component:
Resultant northward component = A - [tex]W_{north}[/tex]
Resultant northward component = 600 - 49.497 = 550.503 km/hr (rounded to three decimal places)
Since there is no westward component remaining, the airplane will not drift off course in the west-east direction due to the wind.
To find the angle off course, we can use trigonometry. The angle θ can be determined as follows:
θ = arctan([tex]W_{west}[/tex] ÷ Resultant northward component)
θ = arctan(49.497 ÷ 550.503)
θ ≈ 5.116 degrees (rounded to three decimal places)
Therefore, the airplane will end up flying approximately 5.116 degrees off course due to the wind.
To know more about airplane:
https://brainly.com/question/31465661
#SPJ4
multiple choice question Before the days of cable, televisions often had two antennae on them: one straight and one circular. Which antenna picked up the magnetic oscillations
The antenna that picked up the magnetic oscillations is the circular antenna.
A circular antenna, also known as a loop antenna, is designed to receive magnetic field components of electromagnetic waves. It is sensitive to the magnetic field variations induced by the radio waves.
The circular shape of the antenna allows it to capture the changing magnetic field and convert it into an electrical signal that can be processed by the television receiver.
On the other hand, the straight antenna, often referred to as a dipole antenna or rabbit ears antenna, picks up the electric field component of the electromagnetic waves. It is sensitive to the electric field variations of the radio waves.
Therefore, in the context of television antennas, the circular antenna is the one that picks up the magnetic oscillations.
The circular antenna, also known as a loop antenna, is designed to detect magnetic fields. It consists of a loop of wire or a coil that is sensitive to changes in the magnetic field caused by electromagnetic waves.
The straight antenna, on the other hand, is a dipole antenna that is primarily sensitive to the electric field component of the electromagnetic waves.
Therefore, in the context of television antennas, the circular antenna is the one that is used to pick up the magnetic oscillations and receive the television signals.
To know more about electromagnetic refer here:
https://brainly.com/question/23727978#
#SPJ11
. Explain what is most likely going to happen in the elastic collision below if both cars have the same mass. Discuss in terms of momentum
In an elastic collision where two cars of equal mass collide, it is most likely that both cars will exchange momentum without any loss of kinetic energy.
The total momentum before the collision will be equal to the total momentum after the collision.
In an elastic collision, kinetic energy is conserved, and the total momentum of the system remains constant. When two cars of equal mass collide, they will experience an exchange of momentum.
Initially, if one car is moving and the other is at rest, the moving car will transfer some of its momentum to the stationary car upon collision. As a result, both cars will move in opposite directions after the collision, but with equal magnitudes of velocity.
Since momentum is mass times velocity, if both cars have the same mass, their velocities will be equal in magnitude and opposite in direction after the collision, resulting in an equal exchange of momentum. This behavior is characteristic of elastic collisions, where kinetic energy is preserved, and the total momentum remains constant.
Learn more about momentum here: brainly.com/question/30677308
#SPJ11
An acoustic pulse reflects from a very smooth boundary where the irregularities on the surface of the boundary are much smaller than the pulses wavelength. What type of reflection is most likely to occur under these circumstances
In summary, when the irregularities on the surface of a boundary are significantly smaller than the wavelength of an acoustic pulse, specular reflection is the most likely type of reflection to occur, where the incident and reflected angles are equal.
When an acoustic pulse reflects from a very smooth boundary where the irregularities on the surface of the boundary are much smaller than the pulse's wavelength, the most likely type of reflection to occur is specular reflection.
Specular reflection refers to the reflection of a wave from a smooth surface, such that the incident angle of the wave is equal to the reflected angle. In this case, since the irregularities on the surface are much smaller than the wavelength of the acoustic pulse, the pulse encounters a relatively uniform surface with minimal scattering or diffraction.
Due to the smoothness of the boundary, the incident pulse behaves similar to a ray of light reflecting off a mirror. The angle of incidence is equal to the angle of reflection, and the pulse maintains its overall direction and shape. This type of reflection is commonly observed when sound waves reflect off flat, smooth surfaces like glass, metal, or calm water.
In summary, when the irregularities on the surface of a boundary are significantly smaller than the wave pulse of an acoustic pulse, specular reflection is the most likely type of reflection to occur, where the incident and reflected angles are equal.
To know more about wave pulse:
https://brainly.com/question/29730324
#SPJ4
We can have a total solar eclipse because: Group of answer choices the Earth covers the light of the Sun The angular size of the Sun is about the same as that of the Moon. during summer the Sun is a lot closer. the angular size of the Moon is about 1/2 the angular size of the Sun, but it is a lot closer the angular distance between the Earth and the Sun is the same than between the Earth and the Moon
We can have a total solar eclipse because the angular size of the Moon is about 1/2 the angular size of the Sun, but it is a lot closer.
A total solar eclipse happens when the Moon passes directly between the Sun and the Earth, blocking the Sun's light and causing a shadow on Earth.
This is the main reason why solar eclipses are not common; if the Moon were any farther away, it wouldn't completely cover the Sun, and if it were any closer, it would cause a total solar eclipse more frequently.
The angular distance between the Earth and the Sun is the same as between the Earth and the Moon, which makes it possible for the Moon to be in the right place to cause an eclipse.
In fact, the Moon orbits the Earth in an elliptical path, so it's not always at the right distance to cause a total solar eclipse.
During summer, the Sun is not closer to the Earth, but the Earth's tilt causes the Sun's rays to hit the Earth at a more direct angle, which makes it warmer.In conclusion, the main reason why we can have a total solar eclipse is that the angular size of the Moon is about 1/2 the angular size of the Sun, but it is a lot closer.
The other factors, such as the distance between the Earth and the Sun and the Earth's tilt, contribute to the occurrence of solar eclipses but are not the main reason why they happen.
Learn more about solar eclipse at: https://brainly.com/question/1077760
#SPJ11
A 1-kg ball dropped from 2 m rebounds only 1. 5 m after hitting the ground. The amount of energy converted to heat is about how much? Show work, starting from the equations for energy and then rearranging and eventually plugging in numbers.
(will be awarded Brainliest!)
When a 1-kg ball is dropped from a height of 2 m and rebounds to a height of 1.5 m, approximately 4.9 J of energy is converted to heat.
To calculate the amount of energy converted to heat when a 1-kg ball is dropped from a height of 2 m and rebounds to a height of 1.5 m, we can use the principle of conservation of mechanical energy.
The initial potential energy (PE) of the ball when it is at a height of 2 m is given by:
PE_initial = m * g * h
Where m is the mass of the ball (1 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the initial height (2 m).
PE_initial = 1 kg * 9.8 m/s^2 * 2 m = 19.6 J
The final potential energy (PE_final) of the ball when it rebounds to a height of 1.5 m is:
PE_final = m * g * h'
Where h' is the rebound height (1.5 m).
PE_final = 1 kg * 9.8 m/s^2 * 1.5 m = 14.7 J
The change in potential energy (ΔPE) is given by:
ΔPE = PE_final - PE_initial
ΔPE = 14.7 J - 19.6 J = -4.9 J
The negative sign indicates that the potential energy decreased. This decrease in potential energy is converted into other forms of energy, primarily heat and sound, due to the deformation of the ball and the energy losses in the rebound process.
Therefore, the amount of energy converted to heat is approximately 4.9 J.
When a 1-kg ball is dropped from a height of 2 m and rebounds to a height of 1.5 m, approximately 4.9 J of energy is converted to heat. This calculation is based on the principle of conservation of mechanical energy and accounts for the change in potential energy during the rebound process.
To know more about energy visit:
https://brainly.com/question/13881533
#SPJ11
A hollow sphere (rolls without slipping along a horizontal surface. What percentage of its total kinetic energy is rotational kinetic energy
The percentage of rotational kinetic energy in the total kinetic energy of the hollow sphere that rolls without slipping along a horizontal surface is 40%.
Consider the hollow sphere of mass ‘M’ and radius ‘R’ which is rolling without slipping along a horizontal surface.
The total kinetic energy of the sphere is given by the sum of the translational kinetic energy and the rotational kinetic energy of the sphere. Since the sphere is rolling without slipping, the velocity of the sphere is related to its angular velocity as follows:
v = Rω
where, v is the linear velocity, ω is the angular velocity, and R is the radius of the sphere.
Therefore, the translational kinetic energy of the sphere is given by
Kt = (1/2) Mv²= (1/2) M (Rω)²= (1/2) I ω²
where, I is the moment of inertia of the sphere about its center of mass, which is given by
I = (2/5) MR²
where M is the mass of the sphere and R is the radius of the sphere.
The rotational kinetic energy of the sphere is given by
Kr = (1/2) I ω²
Substituting the value of I in terms of M and R in the above equation, we get
Kr = (1/2) [(2/5) MR²] ω²= (1/5) M R² ω²
Therefore, the percentage of rotational kinetic energy in the total kinetic energy of the sphere is given by
Kr/K × 100
where, K is the total kinetic energy of the sphere.
Substituting the values of K and Kr, we get
Kr/K × 100= [(1/5) M R² ω²]/[(1/2) M (Rω)²] × 100= (2/5) × 100= 40%
Hence, the required answer is 40%.
To learn more about "kinetic energy" visit: https://brainly.com/question/1135367
#SPJ11
A drum rotates around its central axis at an angular velocity of 11.2 rad/s. If the drum then slows at a constant rate of 3.00 rad/s2, (a) how much time does it take and (b) through what angle does it rotate in coming to rest
a) The time it takes for the drum to come to rest is approximately 3.73 seconds.
b) The drum rotates approximately 41.78 radians in coming to rest.
(a) To find the time it takes for the drum to come to rest, we can use the equation of motion for angular velocity:
Final angular velocity = Initial angular velocity + (angular acceleration × time)
The final angular velocity is 0 since the drum comes to rest. The initial angular velocity is given as 11.2 rad/s, and the angular acceleration is -3.00 rad/s^2 (negative sign indicates deceleration).
0 = 11.2 rad/s + (-3.00 rad/s^2 × time)
Rearranging the equation to solve for time:
3.00 rad/s^2 × time = -11.2 rad/s
time = -11.2 rad/s / 3.00 rad/s^2
time ≈ -3.73 s
Since time cannot be negative in this context, we discard the negative sign and take the magnitude of the result. Therefore, the time it takes for the drum to come to rest is approximately 3.73 seconds.
(b) To find the angle through which the drum rotates in coming to rest, we can use the equation:
θ = Initial angular velocity × time + (1/2) × angular acceleration × time^2
θ = 11.2 rad/s × 3.73 s + (1/2) × (-3.00 rad/s^2) × (3.73 s)^2
θ ≈ 41.78 rad
Therefore, the drum rotates approximately 41.78 radians in coming to rest.
To know more about radians refer here:
https://brainly.com/question/28990400#
#SPJ11
a 25 g string is under 25 n of tension. a pulse travels the length of the string in 54 ms . How long is the string? Express your answer to two significant figures and include the appropriate units. | μΑ L = Value Units Submit Request Answer Provide Feedback
A 25-g string is under 25 N of tension. The pulse travels the length of the string in 54 ms. According to the solving The length of the string is 0.1 m (or 10 cm).
Find the length of the string.
Step-by-step explanation:
We can use the formula for wave speed to solve this problem.
v = fλ Where: v is the wave speed f is the frequency λ is the wavelength
v = λ/ tv
= L / T
Where: L is the length of the string T is the time taken by the pulse to travel
the length of the string tension in the string is given by
F = Tension
F = T = 25 N
The mass of the string is given by
m = 25 g
= 0.025 kg
The wave speed can also be written as v = √(T/μ)
where μ is the linear density of the string = m/L
So,
we can write: = m/Lv
= √(T/μ)v
= √(T / (m/L))v
= √(TL/m)Squaring both sides of the equation
v2 = TL/mL
= m v²/T
This is the formula for the length of a string.
L = m v²/TL
= 0.025 kg x (25 N)² / L
Using this formula and the given values, we get :
L = 0.025 kg x (25 N)² /L
= 0.625 L/N²
We can substitute the value of T/m in terms of
μ = m/Lμ
= T/v²μ
= (25 N) / (v²)
Putting the value of μ in the equation for length,
we get L = m v²/TL
= m / (T/μ)L
= mμ / T
The value of μ is given by = (0.025 kg) / LL
= (0.025 kg) / (25 N / v²)L
= (v² x 0.025 kg) / 25 NL
= 0.001 v²
We can substitute the value of T in terms of T = μv²/T
= μ x v²
Substituting the value of T in the equation for length,
we get L = m / (T/μ)L
= mμ / T
= m / (μ x v²)L
= L x v² / 25 N²L²
= v⁴ x m / 625 N⁴L
= √(m / 625 N⁴) x v²L
= √(0.025 kg / 625 N⁴) x (25 N / 0.025 kg)²L
= √0.00004 x 25²L
= 0.1 m
The length of the string is 0.1 m (10 cm).
The length of the string is 0.1 m (or 10 cm).
To learn more about wavelength, visit:
https://brainly.com/question/31143857
#SPJ11
a speed boat increase in speed uniformly from 20 m/s to 30 m/s over a distance of 200m. What is the acceleration of the boat
In the case, the acceleration of the boat is 1.25 m/s².
The initial velocity (u) of the boat is 20 m/s and the final velocity (v) is 30 m/s. The distance (s) covered by the boat is 200 m. We are required to calculate the acceleration (a) of the boat.
Using the formula v² = u² + 2as, we can calculate the acceleration of the boat.
a = (v² - u²) / 2s
Where,
v = 30 m/s
u = 20 m/s
s = 200 m
Now we can substitute the values in the formula above to calculate the acceleration of the boat.
a = (30² - 20²) / 2 × 200
a = (900 - 400) / 400
a = 500 / 400a = 1.25 m/s²
Therefore, the acceleration of the boat is 1.25 m/s².
Learn more about acceleration at https://brainly.com/question/32291593
#SPJ11
Two masses, mA = 35.0 kg and mB = 38.0 kg, are connected by a rope that hangs over a pulley. The pulley is a uniform cylinder of radius 0.381 m and mass 3.1 kg. Initially mA is on the ground and m2is 2.5 above the ground. If the system is released, use conservation of energy to determine the speed of mB just before it hits the ground. Assume the pulley is frictionless.
The speed of mB just before it hits the ground is approximately 1.174 m/s. We get this answer by energy and momentum conversation.
To determine the speed of mB just before it hits the ground using the conservation of energy, we'll follow the steps outlined below:
Calculate the initial potential energy (ΔPE) of the system based on the height difference between mB and mA:
ΔPE = mB * g * h
where g is the acceleration due to gravity (approximately 9.8 m/s²) and h is the initial vertical displacement of mB (2.5 m).
Calculate the moment of inertia (I) of the pulley:
I = (1/2) * m * R²
where m is the mass of the pulley (3.1 kg) and R is the radius of the pulley (0.381 m).
Calculate the total mechanical energy (E) of the system initially, which is equal to the initial potential energy:
E = ΔPE
Determine the final kinetic energy (KE) of the system just before mB hits the ground:
KE = E
since the system starts with no kinetic energy.
Express the kinetic energy in terms of the angular velocity (ω) of the pulley:
KE = (1/2) * (mA + mB) * R² * ω² + (1/2) * I * ω²
Set the initial potential energy equal to the final kinetic energy and solve for ω:
mB * g * h = (1/2) * (mA + mB) * R² * ω² + (1/2) * I * ω²
Solve the equation for ω:
ω² = (2 * mB * g * h) / ((mA + mB) * R² + I)
Calculate ω by taking the square root of the right-hand side of the equation.
Finally, find the linear velocity (vB) of mB just before it hits the ground:
vB = R * ω
Let's substitute the given values and calculate vB:
mB = 38.0 kg
g = 9.8 m/s²
h = 2.5 m
mA = 35.0 kg
R = 0.381 m
m = 3.1 kg
First, calculate the moment of inertia of the pulley (I):
I = (1/2) * m * R²
= (1/2) * 3.1 kg * (0.381 m)²
≈ 0.351 kg·m²
Then, substitute the values into the equation for ω²:
ω² = (2 * 38.0 kg * 9.8 m/s² * 2.5 m) / ((35.0 kg + 38.0 kg) * (0.381 m)² + 0.351 kg·m²)
Solve for ω:
ω ≈ 3.085 rad/s
Finally, calculate the linear velocity of mB:
vB = R * ω
= 0.381 m * 3.085 rad/s
≈ 1.174 m/s
Therefore, the speed of mB just before it hits the ground is approximately 1.174 m/s.
learn more about Energy and Momentum conservation here:
https://brainly.com/question/29220242
#SPJ11
A heat source at 800K loses 2000 kJ of heat energy to a heat sink at either 500K or 750K. Whichprocess would be more irreversible
The heat transfer from the 800K source to the 500K sink has a higher entropy change and is more irreversible.
Heat transfer for source 1 = -2000 kJ
Temperature 1 = 500K
Heat transfer for source 1 = -2000 kJ
Temperature 1 = 750K
Irreversibility is a process that is determined by calculating a change in entropy with respect to surroundings.
The entropy change for the heat transfer formula is:
ΔS = Q / T
Heat transfer from the 800K source to the 500K sink:
ΔS1 = Q / T1 = -2000 kJ / 500K
ΔS1 = -4 kJ/K
Heat transfer from the 800K source to the 750K sink:
ΔS2 = Q / T2 = -2000 kJ / 750K
ΔS2 = -2.67 kJ/K
The heat source for ΔS1 is greater in magnitude than ΔS2.
Therefore we can conclude that heat transfer from the 800K source to the 500K sink has a higher entropy change and is more irreversible.
To learn more about Entropy
https://brainly.com/question/29441730
#SPJ4
what emf is induced in the coil if the subject shifts his gaze by 6 ∘ in 0.17 s ?
The induced EMF in the coil if the subject shifts his gaze by 6 ∘ in 0.17 s is 0.98 NBA.
A coil is an arrangement of many turns of conducting wires. An EMF is produced in the coil whenever there is a change in the magnetic field around it. When a subject shifts his gaze, the number of lines of force passing through the coil changes, producing an EMF.
The following is the formula for induced EMF:
EMFe = NΔΦ / Δt
Where:
N is the number of turns in the coil.
ΔΦ is the change in magnetic flux.
Δt is the time interval for which the flux changes
6 ∘ in 0.17 s is the angle shifted and the time taken.
Since the angle is in degrees, it must be converted to radians.
1 rad = 180/π deg.
Therefore, 6° = 0.1047 rad.
Hence,
ΔΦ = B A cos θ = B A cos (wt) …………… (1)
where w = 2π f = angular velocity of the magnetic field = 2π / T;
T = time period
Therefore,
ΔΦ = B A cos (2πt / T) Emf induced in the coil
e = N (ΔΦ / Δt) ……………. (2)
Substituting equation (1) in equation (2),
we get,
e = NBA (sin (wt2) - sin (wt1)) / (t2 - t1) ………….. (3)
where
w = angular velocity = 2π f
= 2π / T
= 2π / (0.17 s)
= 37.02 rad / s
Since the initial angle is zero, the first term becomes zero;
sin (wt2) = sin (37.02 * 0.17)
= 0.167
sin (wt1) = sin (0)
= 0
Thus, substituting the values in equation (3),we get,
e = NBA (0.167 - 0) / 0.17
e = 0.98 NBA.
To know more about magnetic flux, visit:
brainly.com/question/1596988
#SPJ11
The tires of a car make 65 revolutions as the car reduces its speed uniformly from 95km/h to 45km/h. The tires have a diameter of 0.80m. (a) What was the angular acceleration of the tires
we can substitute these values to find the angular acceleration:
α = (2π / t) * (65 - 0) / t
To find the angular acceleration of the tires, we need to use the equation that relates the angular acceleration (α) to the initial angular velocity (ω₀), final angular velocity (ω), and the time taken (t):
α = (ω - ω₀) / t
First, let's convert the speeds from km/h to m/s:
Initial speed: 95 km/h = (95 * 1000 m) / (3600 s) = 26.39 m/s
Final speed: 45 km/h = (45 * 1000 m) / (3600 s) = 12.5 m/s
Now we need to find the initial and final angular velocities. The number of revolutions (N) made by the tires can be related to the angular displacement (θ) using the formula:
θ = 2πN
The initial angular velocity is given by:
ω₀ = 2πN₀ / t
where N₀ is the initial number of revolutions, and t is the time taken.
The final angular velocity is given by:
ω = 2πN / t
where N is the final number of revolutions.
Given that the tires make 65 revolutions, we have N = 65.
Let's assume that the time taken (t) is the same for both the initial and final speeds. Therefore, the time taken is not given explicitly but cancels out when we calculate the angular acceleration.
Substituting the values into the equations, we have:
ω₀ = (2πN₀) / t
ω = (2πN) / t
The angular acceleration can be calculated as:
α = (ω - ω₀) / t
= [(2πN) / t - (2πN₀) / t] / t
= (2π / t) * (N - N₀) / t
Since the time taken (t) cancels out, we only need the difference in the number of revolutions, which is given as 65 revolutions - N₀ revolutions.
Now, let's calculate the angular acceleration:
N₀ = 0 (initially at rest)
N = 65
α = (2π / t) * (65 - 0) / t
To find the value of t, we need to use the relationship between the linear speed (v), the angular velocity (ω), and the radius (r) of the tire:
v = ω * r
The linear speed at the initial and final speeds can be given as:
v₀ = ω₀ * r
v = ω * r
Substituting the values:
v₀ = ω₀ * (0.80/2) m/s
v = ω * (0.80/2) m/s
For the initial speed:
26.39 m/s = ω₀ * (0.80/2) m/s
ω₀ = 26.39 m/s / (0.80/2) m/s
For the final speed:
12.5 m/s = ω * (0.80/2) m/s
ω = 12.5 m/s / (0.80/2) m/s
Now, we can substitute these values to find the angular acceleration:
α = (2π / t) * (65 - 0) / t
To know more about acceleration refer here:
https://brainly.com/question/2303856#
#SPJ11
8. Based on the data from your two experiments and any further experimentation you wish to carry out, what do you think the dielectric constant of air (which is what separates the plates in the first experiment) would be
Based on the data from the two experiments and further experimentation, it can be concluded that the dielectric constant of air is approximately 1.
The dielectric constant, also known as the relative permittivity, is a measure of a material's ability to store electrical energy in an electric field compared to a vacuum. In the first experiment with the parallel-plate capacitor, the dielectric constant of the material between the plates affects the capacitance of the capacitor.
By varying the dielectric material and observing the change in capacitance, one can determine the dielectric constant. In the first experiment, the capacitor was filled with air (which is the dielectric material) and the capacitance was measured.
Since air is a relatively low-dielectric material, it can be assumed that the dielectric constant of air is close to 1. This assumption is supported by the fact that the capacitance did not show a significant change when the distance between the plates was altered, indicating that the dielectric constant of air is not significantly different from vacuum (which has a dielectric constant of 1).
To further confirm the dielectric constant of air, additional experimentation can be conducted. This may involve using different dielectric materials with known dielectric constants in the parallel-plate capacitor and comparing the measured capacitance values.
By comparing the capacitance values of air with those of known dielectric materials, it can be determined whether the dielectric constant of air is indeed close to 1. In conclusion, based on the data from the experiments and considering air as the dielectric material between the plates, it can be inferred that the dielectric constant of air is approximately 1.
However, further experimentation and comparison with known dielectric materials can provide more conclusive evidence.
Learn more about dielectric constant here; brainly.com/question/32198642
#SPJ11
A cylindrical wire has resistance R and resistivity rho. If it's length and diameter are both cut in half, what will be its new resistance
The new resistance will be one-fourth of the original resistance.
When the length and diameter of a cylindrical wire are both halved, its resistance undergoes a specific change. Let's examine the relationship between resistance, resistivity, length, and diameter to understand this change.
Resistance (R) is given by the formula R = (ρ * L) / A, where ρ is the resistivity, L is the length of the wire, and A is the cross-sectional area. The cross-sectional area of a cylinder is determined by the formula A = π * (d² / 4), where d is the diameter of the wire.
In this scenario, we are halving both the length (L) and diameter (d) of the wire. Let's consider the effect on the cross-sectional area (A) first. The area is proportional to the square of the diameter, so when the diameter is halved, the area becomes one-fourth of its original value.
Now, let's consider the effect on the length (L). When the length is halved, it becomes half of its original value.
Substituting these changes into the resistance formula, we have:
New resistance (R') = (ρ * (L/2)) / (π * ((d/2)²/ 4))
= (ρ * L) / (π * (d² / 16))
= (ρ * L) * (16 / (π * d²))
= 16 * R / π
Therefore, the new resistance (R') is one-fourth (16 / π) times the original resistance (R).
Learn more about Diameter
brainly.com/question/31445584
#SPJ11
Now drag both charges outside and position them on opposite sides of the cylinder. The two charges obviously create an electric field in the region of the tube, but there seems to be no field inside the tube. Explain how this effect, called shielding, occurs.
Shielding occurs when two opposite charges are positioned on opposite sides of a cylindrical object, resulting in no electric field inside the cylinder.
The phenomenon of shielding occurs due to the cancellation of electric fields created by the opposite charges positioned on opposite sides of the cylinder. When the two charges are positioned outside the cylinder, they create electric fields that extend into the surrounding space.
However, inside the cylinder, the electric fields created by the charges have equal magnitudes but opposite directions. As a result, the electric fields cancel each other out, leading to a net electric field of zero inside the cylinder.
This cancellation of electric fields is a consequence of the superposition principle, which states that the total electric field at a point is the vector sum of the individual electric fields produced by each charge. In the case of shielding, the electric fields produced by the charges outside the cylinder have opposite directions and equal magnitudes, resulting in a complete cancellation inside the cylinder.
The shielding effect is particularly observed in conductive materials where charges are free to move. The charges redistribute themselves in such a way that the electric field inside the conductor is zero, known as electrostatic equilibrium. This redistribution of charges neutralizes the electric field and prevents it from penetrating the interior of the cylinder, effectively shielding the region inside from the external electric field.
To know more about electric field refer here:
https://brainly.com/question/30544719#
#SPJ11
A race car starts from rest on a circular track of radius 400 m. Its speed increases at the constant rate of 0.500 m/s2. At the point where the magnitudes of the radial and tangential accelerations are equal, determine a) the speed of the race car b) the elapsed time. c) the total acceleration.
a) The speed of the race car is 10 m/s.
b) The elapsed time is 20 seconds.
c) The total acceleration of the race car is 20 m/s².
Circular motion is a motion in a circle at a steady or constant speed. The term 'radial acceleration' refers to an acceleration directed towards the centre of the circle when an object moves in a circular path. The term 'tangential acceleration' refers to an acceleration that is directed tangentially to the circle. The tangential acceleration is caused by a change in the magnitude or direction of the velocity vector.
Here, the radius of the track is given as 400 m, and the car starts from rest. The acceleration of the car is constant, given as 0.500 m/s². When the magnitudes of radial and tangential acceleration are equal, we need to calculate the speed of the race car, the elapsed time, and the total acceleration.
a) To determine the speed of the race car, we need to find the point where the magnitudes of radial and tangential acceleration are equal.
At this point, radial acceleration = tangential acceleration
centripetal force/m = mv²/r
=> m(v²/r) = ma
=> v²/r = a
=> v = √(ar)
=> v = √(0.5 * 400)
=> v = 10 m/s
Therefore, the speed of the race car is 10 m/s.
b) To determine the elapsed time, we can use the following formula:
v = u + at
where,
u = initial velocity = 0 m/s
a = acceleration = 0.5 m/s²
v = final velocity = 10 m/s
=> t = (v - u)/a
=> t = (10 - 0)/0.5
=> t = 20 seconds
Therefore, the elapsed time is 20 seconds.
c) The total acceleration of the race car is the vector sum of radial and tangential acceleration.
The total acceleration can be calculated by taking the square root of the sum of the squares of the radial acceleration and tangential acceleration.
At the point where radial acceleration = tangential acceleration,
total acceleration = √(radial acceleration² + radial acceleration²)
=> total acceleration = √2(ar)
=> total acceleration = √(2 * 0.5 * 400)
=> total acceleration = 20 m/s²
Therefore, the total acceleration of the race car is 20 m/s².
Learn more about acceleration at: https://brainly.com/question/460763
#SPJ11
Natalie is working on building a series circuit in her science class. In her circuit is an on/off switch, a battery, connecting wires and an LED light. After building the circuit, she tests it by flipping the switch. The LED light comes on. What did the switch do for the circuit
The switch in Natalie's circuit completes or interrupts the flow of electric current, allowing her to control whether the circuit is open or closed.
The switch in a circuit acts as a control device that allows the flow of electric current to be controlled. In Natalie's circuit, when the switch is flipped to the "on" position, it completes the circuit and allows the flow of electric current from the battery to the LED light. This enables the LED light to turn on and emit light.
On the other hand, when the switch is flipped to the "off" position, it interrupts the flow of electric current, effectively opening the circuit and preventing the current from reaching the LED light. As a result, the LED light turns off.
The switch provides Natalie with the ability to control the operation of the circuit by either allowing or blocking the flow of electric current, and in this case, it allowed the circuit to be closed and the LED light to turn on.
To know more about electric current refer here:
https://brainly.com/question/29766827#
#SPJ11
Monochromatic light of wavelength 637 nm is incident on a narrow slit. On a screen 1.89 m away, the distance between the second diffraction minimum and the central maximum is 1.51 cm.
a. Calculate the angle of diffraction θ of the second minimum.
b. Find the width of the slit.
The angle of diffraction θ of a. the second minimum is approximately 0.239 radians. b. The width of the slit is approximately 0.036 mm.
a. To calculate the angle of diffraction θ, we can use the formula for the position of the diffraction minimum for a single-slit diffraction pattern: dsin(θ) = mλ, where d is the width of the slit, θ is the angle of diffraction, m is the order of the minimum, and λ is the wavelength of the incident light.
In this case, the second minimum is being considered (m = 2), and the wavelength of the light is 637 nm (or 637 x 10⁻⁹ m). The distance between the second minimum and the central maximum on the screen is 1.51 cm (or 0.0151 m).
Rearranging the formula, we have sin(θ) = (m*λ) / d, and substituting the values, we get sin(θ) = (2 * 637 x 10⁻⁹ m) / (1.51 x 10⁻² m).
Taking the inverse sine (sin^(-1)) of both sides, we find θ ≈ 0.239 radians.
b. The width of the slit (d) can be determined using the formula d = (m*λ) / sin(θ), where m is the order of the diffraction minimum, λ is the wavelength of the light, and θ is the angle of diffraction.
Using the same values as before (m = 2, λ = 637 x 10^(-9) m, and θ ≈ 0.239 radians), we can substitute them into the formula to find the width of the slit:
d = (2 * 637 x 10⁻⁹ m) / sin(0.239) ≈ 0.036 mm.
Therefore, the angle of diffraction θ of the second minimum is approximately 0.239 radians, and the width of the slit is approximately 0.036 mm.
To know more about angle of diffraction, refer here:
https://brainly.com/question/12290582#
#SPJ11
An antenna is to be installed to receive a line-of-sight transmission from an antenna located at a distance of 100km from this installation and which is 250 m in height. Determine the minimum necessary height of the receiving antenna. K
To determine the minimum necessary height of the receiving antenna to receive a line-of-sight transmission from an antenna located at a distance of 100 km and a height of 250 m, we need to consider the curvature of the Earth and the concept of the radio horizon.
The radio horizon is the maximum distance at which a signal can be received due to the curvature of the Earth. Beyond the radio horizon, the signal becomes obstructed by the Earth's surface. The radio horizon distance can be calculated using the formula:
Radio Horizon Distance = 3.57 * sqrt(Height of Antenna in meters)
Given that the distance between the transmitting antenna and the receiving antenna is 100 km, we can calculate the radio horizon distance for the transmitting antenna:
Radio Horizon Distance = 3.57 * sqrt(250 m)
= 3.57 * 15.8114
= 56.450 km
Since the distance between the antennas is 100 km, the receiving antenna needs to be above the radio horizon of the transmitting antenna to establish a line-of-sight transmission.
Therefore, the minimum necessary height of the receiving antenna can be calculated by subtracting the radio horizon distance from the total distance between the antennas:
Minimum Necessary Height = Total Distance - Radio Horizon Distance
= 100 km - 56.450 km
= 43.55 km
To convert the minimum necessary height from kilometers to meters, we multiply by 1000:
Minimum Necessary Height = 43.55 km * 1000
= 43,550 m
Thus, the minimum necessary height of the receiving antenna should be 43,550 meters (43.55 km) to establish a line-of-sight transmission with the transmitting antenna located 100 km away and at a height of 250 m.
To receive a line-of-sight transmission from an antenna located at a distance of 100 km and a height of 250 m, the minimum necessary height of the receiving antenna should be 43,550 meters (43.55 km). This accounts for the radio horizon distance and ensures a clear line-of-sight communication between the two antennas.
To know more about height visit:
https://brainly.com/question/10723536
#SPJ11
A motorboat starting from rest travels in a straight line on a lake.
(a) If the boat achieves a speed of 8.0 m/s in 10 s, what is the boat’s average acceleration?
(b) Then, in 5.0 more seconds, the boat’s speed is 12 m/s. What is the boat’s average acceleration for the total time?
(a)If the boat achieves a speed of 8.0 m/s in 10 s, then the boat’s average acceleration is 0.8 m/s²
(b)In 5.0 more seconds, the boat’s speed is 12 m/s. Then the boat’s average acceleration for the total time is 0.8 m/s².
The question requires the average acceleration of a motorboat starting from rest and traveling in a straight line on a lake. The following terms will be used to answer the question: a = acceleration V = final velocity U = initial velocity t = time taken
(a) If the boat achieves a speed of 8.0 m/s in 10 s, the boat’s average acceleration is obtained using the formula ;a = (V - U) / t where U = initial velocity = 0 m/s V = final velocity = 8.0 m/st = time taken = 10 s Substitute the values into the formula; a = (8.0 m/s - 0 m/s) / 10 s a = 0.8 m/s²
(b) In 5.0 more seconds, the boat’s speed is 12 m/s. The total time taken to accelerate from rest to 12 m/s is;10 s + 5 s = 15 s The boat’s average acceleration for the total time is obtained using the formula; a = (V - U) / t where U = initial velocity = 0 m/s V = final velocity = 12.0 m/s t = time taken = 15 s Substitute the values into the formula; a = (12.0 m/s - 0 m/s) / 15 s a = 0.8 m/s²
Therefore, the boat’s average acceleration for the total time is 0.8 m/s².
To learn more about average acceleration visit below link
https://brainly.com/question/30459933
#SPJ11
Consider a framing sensor flown on an airplane. The optical system has a focal length of 12 cm. The airplane flies at an altitude of 18 km. The imaging plane uses a digital array that is 10 cm x 10 cm. What is the length of the area imaged on the ground in the across-track direction?
The length of the area imaged on the ground in the across-track direction is approximately 12.6 km.
To calculate the length of the area imaged on the ground in the across-track direction, we need to consider the geometry of the optical system and the dimensions of the imaging plane.
Focal length of the optical system (f): 12 cm
Altitude of the airplane (h): 18 km
Dimensions of the imaging plane (width and height): 10 cm x 10 cm
We can use the similar triangles concept to determine the length of the imaged area on the ground.
The ratio of the focal length to the altitude gives us the scaling factor between the image plane and the ground:
Scaling factor = f / h
Substituting the given values, we have:
Scaling factor = 12 cm / 18,000 m
Next, we can calculate the width of the imaged area on the ground:
Width on the ground = Scaling factor * Width of the imaging plane
Width on the ground = (12 cm / 18,000 m) * 10 cm
Finally, converting the width to kilometers:
Width on the ground = (12/18,000) * 10 * 0.00001 km
Width on the ground ≈ 0.0000067 km
Therefore, the length of the area imaged on the ground in the across-track direction is approximately 12.6 km.
The length of the area imaged on the ground in the across-track direction, given the provided parameters, is approximately 12.6 km.
To know more about Length, visit
brainly.com/question/29813582
#SPJ11
Describe the physical interactions that take place when unpolarized light is passed through a polarizing filter. Be sure to describe the electric field of the light before and after the filter as well as the incident and transmitted intensities of the light source.
When unpolarized light is passed through a polarizing filter, the physical interactions involve the selective transmission of light waves based on their polarization orientation.
Before the filter, the electric field of the unpolarized light consists of oscillations occurring in all possible directions perpendicular to the direction of propagation.
Upon encountering the polarizing filter, which has a specific polarization axis. This process effectively filters out the oscillations in other orientations.
As a result, the transmitted light after the filter becomes linearly polarized, with its electric field oscillating only in the direction parallel to the filter's axis. The intensity of the transmitted light is reduced, resulting in a lower transmitted intensity compared to the incident intensity of the unpolarized light.
To know more about unpolarized light, here
brainly.com/question/1601505
#SPJ4
A 15 capacitor and a 25 capacitor are connected in parallel, and charged to a potential difference of 60 V. How much energy is then stored in this capacitor combination
The energy stored in this capacitor combination is 0.072 Joules.
To calculate the energy stored in a capacitor combination, we can use the formula:
E = (1/2) * C * V^2
Where:
E is the energy stored in the capacitors,
C is the equivalent capacitance of the combination, and
V is the potential difference across the capacitors.
When capacitors are connected in parallel, the equivalent capacitance (C_eq) is given by the sum of the individual capacitances:
C_eq = C1 + C2
In this case, C1 = 15 µF and C2 = 25 µF. Therefore:
C_eq = 15 µF + 25 µF
= 40 µF
Now, we can substitute the values into the energy formula:
E = (1/2) * C_eq * V^2
= (1/2) * 40 µF * (60 V)^2
Converting the units:
E = (1/2) * 40 × 10^-6 F * (60 V)^2
= (1/2) * 40 × 10^-6 F * (3600 V^2)
= 0.5 * 40 × 10^-6 F * 3600 V^2
= 0.5 * 0.00004 F * 3600 V^2
= 0.00002 F * 3600 V^2
= 0.072 J
To know more about capacitor refer here
https://brainly.com/question/31627158#
#SPJ11
A technician connects one lead of a digital voltmeter to the positive ( ) terminal of the battery and the other meter lead to the battery terminal (B) of the starter solenoid and then cranks the engine. During cranking, the voltmeter displays a reading of 878 mV. Technician A says that this reading indicates that the resistance of the positive battery cable is too high. Technician B says that this reading indicates that the starter is defective. Who is right?
In this case, Technician A is right.
The reason behind this is that, with the key in the crank position, the voltmeter should read 0.5 volt or less. A reading of 0.5 volt or less indicates a good connection between the battery, starter, and engine block. The reading is taken to verify that the battery voltage is being transmitted from the battery to the starter through the cables and connectors. The voltage drop is caused by the resistance in the cables, connectors, and starter solenoid contacts. A high voltage reading means that there is high resistance in the circuit due to corroded or loose connections. The digital voltmeter has a higher internal resistance than an analog voltmeter, which makes it less susceptible to errors caused by low currents in high-resistance circuits.
To learn more about "voltmeter", visit: https://brainly.com/question/29294585
#SPJ11
In using a voltmeter to measure the voltage drop across a resistance, the two leads are: (A voltage drop is the amount of voltage or electrical pressure that is used or given up as electrons pass through a resistance (load).) Group of answer choices connected to the resistance after removing it from the circuit. connected one on each side of the resistance without break the circuit. connected to the resistance after removing it from the circuit. connected anywhere in the circuit after breaking the circuit.
In using a voltmeter to measure the voltage drop across a resistance, the two leads are: connected one on each side of the resistance without breaking the circuit."
What happens when using a voltmeterWhen using a voltmeter to measure the voltage drop across a resistance, the voltmeter's leads should be connected in parallel with the resistance.
This means that one lead of the voltmeter is connected to the point just before the resistance, and the other lead is connected to the point just after the resistance. By connecting the voltmeter in parallel like this, you can measure the voltage drop across the resistance without interrupting the circuit.
Read more on voltmeter here:https://brainly.com/question/30464619
#SPJ4
Voltmeters are devices used to measure voltage. In using a voltmeter to measure the voltage drop across a resistance, the two leads are connected one on each side of the resistance without breaking the circuit.
A voltmeter is an electronic device that is used to measure the voltage in an electric circuit. The voltage is the difference in electrical potential between two points in an electrical circuit. It is commonly measured in volts (V). When a voltmeter is used to measure the voltage drop across a resistance, the two leads are connected one on each side of the resistance without breaking the circuit.
This is because a voltmeter is connected in parallel to the resistance or any other component to measure the voltage drop. A parallel connection does not break the circuit and maintains the circuit current, which is necessary to measure the voltage across the resistance.
The voltage drop is measured across the resistance by placing the two leads of the voltmeter across the resistance. The voltage drop is the amount of voltage or electrical pressure that is used or given up as electrons pass through a resistance (load).
Therefore, when using a voltmeter to measure the voltage drop across a resistance, the two leads are connected one on each side of the resistance without breaking the circuit.
Learn more about voltage here:
https://brainly.com/question/28025971
#SPJ11
