element compound mixture​

Element Compound Mixture

Answers

Answer 1
ooooo yup:) element compound mixture

Related Questions

What would you observe in the following cases:
(1) Sodium and potassium are placed in hot water
(ii) Burning magnesium is introduced into steam?
dium and iron with water​

Answers

Answer:

See explanation

Explanation:

When introduced to hot water, sodium and potassium metals react violently to form a colourless solution and hydrogen gas. The metal becomes spontaneously ignited and burns with its characteristic flame colour.

Magnesium burns with a bright white flame to yield solid magnesium oxide

and hydrogen gas when steam is passed over heated magnesium.

The last question is not clear but I believe that it has to do with reaction of sodium and iron with water. Sodium reacts violently with cold water at room temperature to evolve hydrogen gas and aqueous sodium hydroxide.

Iron reacts with steam at red heat to yield hydrogen gas and Fe3O4

when 3.18 g of copper (||) oxide were carefully heated in a stream of dry hydrogen, 2.54 g of copper and 0.72 g of water were formed determine the number of moles of hydrogen atoms which combine with one mole of oxygen atoms​

Answers

Answer:

the number of moles of atom is 0.91584

help me pleaseeee, ty if you doo:))

Answers

Answer:

9 is the correct answer

Help pls!!! Thnk you

Answers

Answer:

521 nm

Explanation:

From the question given above, the following data were obtained:

Frequency (v) = 5.76×10¹⁴ s¯¹.

Wavelength (λ) =.?

RECALL: velocity (c) of light = 3×10⁸ m/s

Thus, we can obtain the wavelength of the green light by using the following formula:

c = vλ

3×10⁸ = 5.76×10¹⁴ × λ

Divide both side by 5.76×10¹⁴

λ = 3×10⁸ / 5.76×10¹⁴

λ = 5.21×10¯⁷ m

Next, we shall convert 5.21×10¯⁷ m to nanometer (nm). This can be obtained as follow:

1 m = 1×10⁹ nm

Therefore,

5.21×10¯⁷ m = 5.21×10¯⁷ m × 1×10⁹ nm / 1 m

5.21×10¯⁷ m = 521 nm

Thus, 5.21×10¯⁷ m is equivalent to 521 nm

Therefore, the wavelength (λ) of the photon of the green light is 521 nm.

Answer:

the wavelength (λ) of the photon of the green light is 521 nm.

How does one determine how much of a molecule is produced in a reaction?

O A. Oxidation states are used to calculate the number of product molecules.

B. The molar masses of the molecules tell how many grams of product will form.

O c. The coefficients and molar masses are used to calculate amounts of molecules

D. The mass of the products is determined by adding the mass of the reactants.​

Answers

Answer:

c

Explanation:

i doubt it

The coefficients and molar masses are used to calculate the amounts of molecules. Hence, option C is correct.

What is a molecule?

The smallest particle of a substance has physical and chemical properties of that substance. Molecules are made up of one or more atoms.

A molecule can be determined by how much is produced in a reaction through the coefficients and molar masses are used to calculate the amounts of molecules.

Hence, option C is correct.

Learn more about molecules here:

https://brainly.com/question/14130817

#SPJ5

3. True or False: White light is a mixture of all colors of the visible
spectrum.
O True
False

Answers

it's true ....

plz mark my answer as brainlist plzzzz vote me also

The answer is true as it contains all the colors of the rainbow

How does the atomic radius of an element is related to its metallic character

Answers

Answer:

The large the atomic radius the more the metallic character of elements

Explanation:

The atomic radius is related to the metallic character in a way that the larger the atomic radius, the more metallic a body becomes.

Therefore, as we go down a group, metallic character increases.

Metallic character relies on the ability and willingness of an atom to share its valence electrons. As the size of an atom becomes large, the more metallic it is and the more its metallic character. In some other cases this character is known as electropositivity.


Which term means that a metal can be made into wire?
A)
Luster
B)
Ductility
Malleability
D)
Conductivity

Answers

Answer:

c

Explanation:

i think

why is newtons first law of motion important to science plsss help :(

Answers

Explanation:

every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force

Answer: Newton's 1st law of motion explains how things move and how forces work on their movement, which makes it an extremely important discovery.

Explanation: If we were to place an object into space, we could observe how it behaves without any external influences.

What is the mass of an object that has a density of 2,86 g/mL and a volume of
75 mL

Answers

Answer:

214.5 g

Explanation:

The mass of a substance when given the density and volume can be found by using the formula

mass = Density × volume

From the question we have

mass = 75 × 2.86

We have the final answer as

214.5 g

Hope this helps you

please help me i willgive brain list ​

Answers

Answer:

the molecular formulas of:

Butane is C4H10butene is C4H8Butyne is C4H6.

Hexane is C6H14Hexene is C6H12Hexyne is C6H10

hope it helps........


A ground water tank has its height 2m. Calculate the pressure at its bottom when it is completely filled with water.​

Answers

The pressure at the bottom : 19600 N/m²

Further explanation

Given

A ground water tank has its height 2m

Required

The pressure at its bottom

Solution

Hydrostatic pressure is the pressure caused by the weight of a liquid.  

The weight of a liquid is affected by the force of gravity.  

The hydrostatic pressure of a liquid can be formulated:  

[tex]\large{\boxed{\bold {P_h ~ = ~ \rho.g.h}}[/tex]

Ph = hydrostatic pressure (N / m², Pa)  

ρ = density of liquid (kg / m³)  

g = acceleration due to gravity (m / s²)  

h = height / depth of liquid surface (m)  

ρ = density of water (kg / m³) = 1000

g = acceleration due to gravity = 9.8 m/ sec²

The pressure

[tex]\tt P=1000\times 9.8\times 2=19600~N/m^2[/tex]

The simplest structures that can carry out all of the activities characteristic of life are

Answers

Answer:

Cells are the simplest structures that can carry out all of the characteristics activities of life.

Explanation:

All living things are made of cells and all cells come from other cells.

workout the oxidation number of phosphorus in the following compound H3PO3​

Answers

Answer:Phosphorus ahs an ocxidation number of 3. Phosphoric acid, H3PO3 has structure where there is one hydrogen (-H), two hydroxyl groups (-OH) and one oxgen (=O) attached to the central phosphorus P

Using the normal rules, H= +1, O = -2, OH = -1 and balancing out the "charges" we get P =+3

Explanation:

5.Summarize Which of the following is not an
advantage of using SI units?
A allows scientists to compare observations
and results
B can compare measurements made years
apart
C based on the number 5, which is easy to use
in calculations
D uses prefixes to express measurements that
are small or large

Answers

Answer:

C based on the number 5, which is easy to use  in calculations

Explanation:

The SI unit system is not based on the number 5.

How many grams are there in a 14.5 moles lithium permanganate

Answers

There are 1825.6 g in a 14.5 moles Lithium permanganate

Further explanation

The mole is the number of particles(molecules, atoms, ions) contained in a substance  

1 mol = 6.02.10²³ particles

Can be formulated

N=n x No

N = number of particles

n = mol

No = Avogadro's = 6.02.10²³

Moles can also be determined from the amount of substance mass and its molar mass :

[tex]\tt mol=\dfrac{mass}{MW}[/tex]

moles of Lithium permanganate = 14.5

Lithium permanganate (LiMnO4) MW=125.9 g/mol, so mass :

[tex]\tt mass=mol\times MW\\\\mass=14.5\times 125.9~g/mol\\\\mass=1825.6~g[/tex]

Help me answer this plz.

Answers

Answer:

87.58 L of C₂H₂

Explanation:

We'll begin by calculating the number of mole in 250 g of CaC₂.

This can be obtained as follow:

Mass of CaC₂ = 250 g

Molar mass of CaC₂ = 40 + (12×2)

= 40 + 24

= 64 g/mol

Mole of CaC₂ =?

Mole = mass /Molar mass

Mole of CaC₂ = 250 / 64

Mole of CaC₂ = 3.91 moles

Next, the balanced equation for the reaction. This is given below:

CaC₂ + 2H₂O —> C₂H₂ + Ca(OH)₂

From the balanced equation above,

1 mole of CaC₂ reacted to produce 1 mole of C₂H₂.

Next, we shall determine the number of mole of C₂H₂ produced by the reaction of 250 g (i.e 3.91 moles) of CaC₂. This can be obtained as follow:

From the balanced equation above,

1 mole of CaC₂ reacted to produce 1 mole of C₂H₂.

Therefore, 3.91 moles of CaC₂ will also react to produce 3.91 moles of C₂H₂.

Finally, we shall determine the volume of C₂H₂ produced from the reaction. This can be obtained as follow:

Recall:

1 mole of any gas occupy 22.4 L at STP.

1 mole of C₂H₂ occupied 22.4 L at STP.

Therefore, 3.91 moles of C₂H₂ will occupy = 3.91 × 22.4 = 87.58 L

Thus, 87.58 L of C₂H₂ is produced from the reaction.

Commercial scuba divers use tanks filled with a mixture of gases known as Trimix on very long, deep dives. Trimix is composed of 70% nitrogen, 10% oxygen and 20% helium. The total pressure of the Trimix inside a certain tank at the beginning of the dive is 118.4 atm. A. What is the partial pressure of the oxygen in the tank?

Answers

Answer:

Partial pressure of O = 11.84 atm

Explanation:

To solve the excersise we think in the partial pressure law with mole fraction.

Mole fraction of gas = Partial pressure of gas / Total pressure

We have data of all the mole fractions:

0.70 N0.10 O0.20 H

Let's find out the partial pressure of oxygen in the tank. We replace data in the formula:

0.10 = Partial pressure of gas / 118.4 atm

0.10 . 118.4 atm = Partial pressure of gas → 11.84 atm

If we determine all the partial pressures:

0.70 . 118.4 atm = 82.88 atm → Partial pressure N

0.20 . 118.4 atm = 23.68 atm → Partial pressure He

We can determine the partial pressure of the trimix.

Sum of partial pressures of each gas = Total pressure of the mix

11.84 atm + 82.88 atm + 23.68 atm = 118.4 atm

(A way to see, if our operations were ok)

The partial pressure of oxygen in the tank is required.

The partial pressure of the oxygen in the tank is 11.84 atm.

[tex]x_o[/tex] = The mole fraction of oxygen = 10%

[tex]p[/tex] = The total partial pressure in the tank = 118.4 atm

The mole fraction of a gas is equal to the ratio of partial pressure of the gas to the total partial pressure.

[tex]x_o=\dfrac{p_o}{p}\\\Rightarrow p_o=x_op\\\Rightarrow p_o=0.1\times 118.4\\\Rightarrow p_o=11.84\ \text{atm}[/tex]

The partial pressure of the oxygen in the tank is 11.84 atm.

Learn more:

https://brainly.com/question/14281129?referrer=searchResults

Describe two ways the material in illustrates the importance of creativity in scientific investigations

Answers

Answer:

J.J Thompson make use of creativity to explain cathode ray tube experiment.

Also, creativity was used by Daltons to explain Joseph Proust's work.

Explanation:

This problem is all about the the beginning part of chemistry that is the atomic  theory. The atomic theory was starts from the time of people like Democritus and down to people like J.J Thompson and John Dalton. Although it has been registered and credited that Dalton is the father of atomic theory many people has also worked on it before him for instance person like Joseph Proust. The reason behind this because some works that has been done by other people such as Democritus[who was the first person to start atomic studies] does not have any scientific evidence.

Creativity is needed when it concerns scientific research and investigation. This is what scientists such as John Daltons and J.J Thompson have used. J.J Thompson make use of creativity to explain cathode ray tube experiment. Also, creativity was used by Daltons to explain Joseph Proust's work.

What is the correct order of the scientists in order of their work related to the structure of an atom from earliest to most recent?

Neils Bohr, Ernest Rutherford, JJ Thomson, John Dalton, Democritus and Erwin Schrodinger
Erwin Schrodinger, JJ Thomson, John Dalton, Neils Bohr, Ernest Rutherford and Democritus
Democritus, John Dalton, JJ Thomson, Ernest Rutherford, Neils Bohr and Erwin Schrodinger
John Dalton, Neils Bohr, JJ Thomson, Democritus, and Ernest Rutherford and Erwin Schrodinger



PLEASE HELP !!!

Answers

Answer:

C. democritusm John dalton, JJ Thomason, Ernest Rutherford, Neils Bohr, and Erwin Schrodinger.

The correct order of the scientists in order of their work related to the

structure of an atom from earliest to most recent include Democritus, John

Dalton, JJ Thomson, Ernest Rutherford, Neils Bohr, and Erwin Schrodinger.

Democritus was regarded as one of the earliest scientist who first proposed

atomic theory around 460 BC which was then modified and used by others

such as John Dalton, JJ Thomson, Ernest Rutherford and Neils Bohr.

The most recent of them all was Erwin Schrodinger which was  the wave

equation for electron movements in the 20th century.

Read more on https://brainly.com/question/20339664

What is the equilibrium constant of a reaction?
A. It is the ratio of the concentrations of products to the concentrations of reactants.
B. It is the ratio of the number of moles of products to the number of moles of reactants. C. It is the concentrations of products multiplied by the concentrations of reactants.
D. It is the number of moles of reactants subtracted from the number of moles of products.

Answers

Answer:

A. It is the ratio of the concentrations of products to the concentrations of reactants.

Explanation:

The equilibrium constant of a chemical reaction is the ratio of the concentration of products to the concentration of reactants.

This equilibrium constant can be expressed in many different formats.

For any system, the molar concentration of all the species on the right side are related to the molar concentrations of those on the left side by the equilibrium constant. The equilibrium constant is a constant at a given temperature and it is temperature dependent. The derivation of the equilibrium constant is based on the law of mass action. It states that "the rate of a chemical reaction is proportional to the product of the concentration of the reacting substances. "

Answer: A

Explanation:

a p e x

What variable represents specific heat in the equation Q = mCAT?
O A. The variable c
O B. The variable T
C. The variable m
O D. The variable Q

Answers

Answer:

the variable A represented specific heat capacity

Answer: The Variable T

Explanation:

help me pleaseeeee, if you do tyyy :)

Answers

There's 6 because it says CH(3)F which means theres three hydrogen atoms in one, which tells us there's six in two

I need answers
Question 2 (2 points)
Which of the following is an example of BALANCED forces?
A ball rolling uphill
O A ball sitting motionless on the ground
O A ball bouncing on the ground
O A ball rolling downhill

Answers

Answer:

Concepts: Physical Forces

In order for an object to be balanced, then it must be in equilibrium which means that no additional forces are being exerted. A ball sitting motionless would result in a balanced force that exerts no additional forces.

Write True/False against the following statements and also correct the false statement.
Greater the calorific value better is the fuel.

Answers

Answer:

I think it is true you should go for true

Hi! The answer would be true.

The reaction energy type that has a negative value at the end of the reaction is called: a Barothermic b Exothermic c Endothermic d Isothermic

Answers

Answer:

b) Exothermic

Explanation:

Exothermic reaction:

The type of reactions in which energy is released are called exothermic reactions.

In this type of reaction energy needed to break the bonds are less than the energy released during the bond formation.

For example:

Chemical equation:

C + O₂   →  CO₂

ΔH = -393 Kj/mol

it can be written as,

C + O₂   →  CO₂ + 393 Kj/mol

Which of the following is NOT an example of potential energy?

A. car moving down the highway
B. log on a fire
C. person standing on a diving board
D. liter of gasoline

Answers

Answer:

A. car moving down the highway

Explanation:

Potential energy is when the energy is being held in, as in, it is very still, and not moving.

When a car is moving down a highway, it is releasing kinetic energy, instead of potential.

Which one is the right answer?

Answers

Answer:

a) p waves travel slower then 5 waves

Characteristics of the water at the mountain source: Speed: Temperature Oxygen Level Nutrient Level

Answers

Describe the characteristics of the water at the mountain source:

Answer:

The answer is below

Explanation:

Speed: there will be faster speed due to the steep slope movement of water from the mountain.

Temperature: there will be lower temperatures as a result of the faster speed of water movement which reduces the influence of solar radiation on it.

Oxygen: the oxygen content is higher due to little or no residue particles present in it.

Nutrient Level: this is considered somewhat low as a result of the water coldness and speed which does not support the nutrition base to form.

When a pendulum swings, at which point is kinetic
energy highest:

Answers

Answer:

3

Explanation:

Other Questions
action B - Fill in the blank spaces27. The formula that is used to calculate the fluids to give to a burnt patient iscalled Hoofbergs28. The bed accessory that the nurse use to lift the weight of linen from the burn area 3. (01.02 LC)Which of the following can help keep you safe when active on a sunny and warm day? (3 points)(O Wear layers of heavy clothing while exercising to protect from the sunTake frequent breaks in a shaded area to avoid overheatingO Remove your hat and sunglasses to avoid excess perspirationO Avoid drinks until after the workout to protect from temperature shock Suggest reasons for and against the inclusion of hydrogen in the main group of the periodic table 1. How would you say I am going to wash the dishes using ir + a + infinitive?2. How would you say She is going to vacuum using ir + a + infinitive?3. How would you say They are going to make the bed using ir + a + infinitive?4. How would you say I am going to sweep using ir + a + infinitive? 5. Mis hermanos no se levantine bien.A. Siempre se abrazan.B. Siempre se pelean. C. Siempre se saludan con un beso. John bought an old motor bike for $ 5675 and spent $ 453 on its repair. Then he sold it in $ 7265, find out the profit he made. Using the SMART goal-writing criteria, what refers to asking how to achieve the goal?SpecificMeasurableAttainableRealistic Which best describes the Quick Access toolbar and the ribbon tabs? GIVING BRAINLIEST!!!The circulatory system is responsible for what?filtering toxins out of the bodytransporting materials through the bodycontrolling our body parts Why is it a good idea to pause after reading a rhetorical question? M. elementcenabrecht0.5 mele of an How does politics help a democracy? How can it hinder it? How do I do the work? The long component of the nephron that aids in re-absorption of water from the kidney back into the circulatory system is called Which related equations are in the same fact family as the following equation?3+6=nSelect ALL correct answers.A.6+3=nB.n3=6C.36=nD.n6=3E.n+6=3(help ) Which example best describes agribusiness does anyone know how to tell the difference between rational and irrational numbers? Evaluate the expression 2n - 6 if n = 16. Please help me!!!Write the following comparison as a ratio reduced to lowest terms.25 nickels to 25 dimes The nutrition label shows the total amount of carbohydrates in grams. One gram of carbohydrates provides four calories of energy.For this food, the number of calories obtained from carbohydrates is . DOG SKELETAL SYSTEM BONES SKELETAL TISSUE BONE CELLS SMALLEST TO LARGEST