Fill in the coefficients that will balance the following reaction: (Note: Use 1 as coefficient where appropriate.) NaCl + CaS → Na2S + CaCl2

Answer:

For your first question, Curium does not occur naturally on Earth, meaning that it is not produced naturally on Earth. However, it can be formed in nuclear reactors.

For your second question, Curium has been used to provide power to electrical equipment used on space missions, but doesn't seem to be that important overall.

Explanation:

Hope this helped!

Answer:

This question appear incomplete

Explanation:

This question appear incomplete. However, let's answer the resulting questions. Firstly, let's define mass number since each of the "problems" refers to mass number. Mass number is the total number of protons and neutrons in the nucleus of an atom. It should also be noted that number of protons in any given neutral atom is the same with the number of electrons of such an atom.

1) Make a He atom with a mass of 4. How many protons did you put in the nucleus?

Answer: Helium (He) atom (having a mass number of 4) has an atomic number of 2. Atomic number is the number of protons and thus 2 protons would be in the nucleus of the Helium atom.

2) Make a Li atom with a mass number of 7. How many electrons did you place in the outermost orbital  (ring)?

Answer: Lithium (Li) atom (having a mass number of 7) has an atomic number of 3. Remember that atomic number (number of protons) equals number of electrons in a neutral atom. Thus, lithium atom would have 3 electrons; 2 electrons in it's first shell and 1 electron in it's outermost shell

3) Make a N atom with a mass number of 14. How many neutrons are in the nucleus?

Answer: Nitrogen (N) atom (with a mass number of 14) has an atomic number of 7. Since atomic number is the number of protons and mass number is the number of protons + neutrons. Then, number of neutrons would equal mass number minus atomic number:

number of neutrons = 14 - 7

number of neutrons = 7 neutrons

4) Make a B atom with a mass number of 11. How many electrons did you put in the second orbital (ring)?

Answer: An atom (Boron) with mass number of 11 has an atomic number of 5. Since atomic number eventually equals number of electrons, then Boron has 5 electrons; 2 electrons in it's first shell and 3 electrons in it's second orbital/ring.

Answer:

2 protons in the He nucleus,

1 electron in the outermost,

7 neutrons in the nucleus

3 electrons in the  2nd orbital ring

Explanation:

I just did it on E2020

This chemical reaction can also be written as

2C2H6+7O2-->4CO2+6H2O

This is a chemical reaction because reactants are converted into products. This is the combustion of ethane where ethane and oxygen have been converted into carbon dioxide and water

Answer:

Photosynthesis reactions are naturally occurring processes that take place in all green plants and most algae. During this process the plant uses light energy, carbon dioxide, and water to make food and then releases oxygen which all living organisms require to the atmosphere.During the process of photosynthesis, cells use carbon dioxide and energy from the Sun to make sugar molecules and oxygen. These sugar molecules are the basis for more complex molecules made by the photosynthetic cell, such as glucose

Explanation:

Answer:

Ba,Sr,Ca,Be

Explanation:

as atomic size increases ionisation potential decreases

The value of x = 97

The unknown angles : 97°,97°, 107° and 59°

One variable linear equation is an equation that has a variable and the exponent number is one.  

Can be stated in the form:  

[tex]\large{\boxed{\bold{ax=b}}[/tex]

or  

ax + b = c, where a, b, and c are constants, x is a variable  

The parallelogram has total angle of 360°.

The value of each of the 4 angles of the parallelogram :

1. x°

2. x°

3. x+10°

4. 59°

The sum of the four angles of this parallelogram is :

[tex]\tt x+x+x+10+59=360[/tex]

So that the mathematical equation becomes (by combining the like terms) :

[tex]\tt 3x+69=360\\\\3x=291\\\\x=97[/tex]

So the value of the four angles (by entering the x value)

1. 97°

2. 97°

3. x+10=97+10=107°

4. 59°

Answer:

Due to protons and electrons number.

Explanation:

The atomic particles determine the name of an atom or ion by number of protons because the number of protons determines the atomic number of an element and this atomic number distinguishes one element from another and number of electrons also be different in atoms of the same element due to chemical bonding, due to which ions are produced. So we can say that atomic particles such as proton, electron and neutrons determine the name of an atom or ion.

Answer:

a is oxidation

b is reduction

c is reduction

d is oxidation

hope it helps you

Answer:

No

Explanation:

My sister uses this all the time and it is perfectly safe

Answer:

no

Explanation:

as long as you change it up a little and word it to look like your own

Answer:

A. 2

Explanation:

A particle of water is made up of two hydrogen atoms and one oxygen atom. However, the question asked for how many types of atoms there are, so the answer is 2.

Answer:

7

Explanation:

Answer:

limiting reactant

Answer: B) limiting reagent

Answer:

C. Electrons flow from an outlet into a toaster, causing it to heat a

slice of bread.

Explanation:

Current produces a heating effect. Current may be used to produce a heating effect in appliances such as the electric pressing iron, toaster, oven etc.

When electrons flow from an outlet into a toaster and the current thus obtained heats a slice of bread, current is said to flow from the outlet into the toaster.

Let us remember that current refers to the flow of electrons in a circuit.

Answer:

Salt!!!

Explanation:

Answer:

CaO, CaF2, or CaCl2

Explanation:

In an ionic compound, the charges need to balance out. This is the only set of compounds that fits this criteria.

Answer:

CaO CaF2 CaCl2 are ionic

Explanation:

Because electronegativity difference between calcium and other atom is more than 1.7

Answer:

to make it basic from acidic

Answer:

V₂ =  116126.75 cm³

Explanation:

Given data:

Radius of balloon = 15 cm

Initial pressure = 2 atm

Initial temperature = 35 °C (35 +273 = 308K)

Final temperature = -20°C (-20+273 = 253 K)

Final pressure = 0.3 atm

Final volume = ?

Formula:  

P₁V₁/T₁ = P₂V₂/T₂  

P₁ = Initial pressure

V₁ = Initial volume

T₁ = Initial temperature

P₂ = Final pressure

V₂ = Final volume

T₂ = Final temperature

Solution:

Initial volume of balloon:

V = 4/3πr³

V = 4/3×22/7×(15cm)³

V = 14137.17 cm³

V₂ = P₁V₁ T₂/ T₁ P₂  

V₂ = 2 atm × 14137.17 cm³ × 253 K / 308 K × 0.3 atm

V₂ = 7153408.02 atm .cm³. K / 61.6 K.atm

V₂ =  116126.75 cm³

Answer: 0.034354

Explanation:1 mole=22.4 liters of Br2 at STP so, 22.4x=0.77

x= 0.034354

Answer:

0.034354

Explanation:

Just did worksheet

13 half-lives have passed

General formulas used in decay:  

[tex]\large{\boxed{\bold{N_t=N_0(\dfrac{1}{2})^{t/t\frac{1}{2} }}}[/tex]

T = duration of decay  

t 1/2 = half-life  

N₀ = the number of initial radioactive atoms  

Nt = the number of radioactive atoms left after decaying during T time  

t1/2 = 4 days

Nt=18 mg (0.01% of the original isotope)

18 mg (Nt) = 0.01% No

No = the original isotope :

[tex]\tt No=\dfrac{100}{0.01}\times 18~mg=180,000[/tex]

The duration of decay  (T) :

[tex]\tt \dfrac{Nt}{No}=\dfrac{1}{2}^{T/4}\rightarrow Nt=0.01\%No[/tex]

[tex]\tt 0.01\%=\dfrac{1}{2}^{T/4}\\\\10^{-4}=\dfrac{1}{2}^{T/4}\\\\(\dfrac{1}{2})^{13}=\dfrac{1}{2}^{T/4}\\\\13=T/4\rightarrow T=52~days[/tex]

Half-lives passed :

[tex]\tt \dfrac{52}{4}=13~half-lives[/tex]

Answer:

Explanation:

THe GrEen OnEs

Answer:

They are in the green "staircase"

Explanation:

these elements are the dividers between metals (on the left of them) and non metals (on the right of them), they have some of the properties of both groups

The oxidation number of Mg in Mg(OH)₂ is +2.

Hence, Option A is correct answer.

The oxidation state, or oxidation number, is defined as the hypothetical charge of an atom if all of its bonds formed with different atoms were fully ionic. It indicates the degree of oxidation of an atom in a chemical compound. Conceptually, the oxidation state may be negative, positive or zero.

Oxidation number of OH = -1

Let us suppose the oxidation number of Mg = x

Charge on compound = 0

We can write

x + 2(-1) =0

x-2=0

x = 2

Thus from the above solution we concluded that The oxidation number of Mg is +2.

Hence, Option A is correct answer.

Learn more about oxidation number:

https://brainly.com/question/3035498

#SPJ1

Answer:

Supersaturated solution.

Explanation:

Hello!

In this case, according to the types of solution in terms of the relative amounts of solute and solvent, we can define a point called solubility at which the amount of solute is no longer dissolved in the solvent; thus, a value of solute/solvent less than the solubility is related to unsaturated solutions, equal to the solubility is related to the saturated solutions and more than the solubility to supersaturated solutions.

Thus, since solubility is temperature-dependent, at 30 °C the solubility of sodium chloride is 36.09 g per 100 mL of water; which means that, since the solution has 50 g of sodium chloride, more than 36.09 g, we infer this is a supersaturated solution.

Best regards!

Answer:

second box is 2 C, third box is 3 C, and the last box is 3 C.

Explanation:

Answer:

V = 1.57 L

Explanation:

Given data:

Mass of iron(III) carbonate = 50.0 g

Volume of CO₂ formed = ?

Temperature = standard = 273 K

Pressure = standard = 1 atm

Solution:

Chemical equation:

Fe₂(CO₃)₃     → Fe₂O₃ + 3CO₂

Number of moles of Fe₂(CO₃)₃ :

Number of moles = mass/molar mass

Number of moles = 50.0 g /235.8 g/mol

Number of moles = 0.21 mol

Now we will compare the moles of Fe₂(CO₃)₃  and CO₂.

                          Fe₂(CO₃)₃         :             CO₂

                              1                    :               3

                            0.21                :            1/3×0.21 = 0.07 mol

Volume of CO₂:

PV = nRT

R = general gas constant = 0.0821 atm.L/mol.K

By putting values,

1 atm × V =0.07 mol × 0.0821 atm.L/mol.K × 273 K

V = 1.57 atm.L / 1 atm

V = 1.57 L

Answer:

417

Explanation:

50um is

50000nm

50000:120=417

Answer:

Number of moles of HCl = 0.17 mol

Explanation:

Given data:

Volume of solution = 347 mL

Molarity of solution = 0.48 M

Number of moles of HCl present = ?

Solution:

Formula:

Molarity = number of moles of HCl / volume in L

Volume in L:

347 mL× 1L / 1000 mL

0.347 L

by putting values in formula:

0.48 mol/L = number of moles / 0.347 L

Number of moles = 0.48 mol/L × 0.347 L

Number of moles = 0.17 mol

Answer is 2

4Fe + 3O2 –> 2Fe2O3

Answer:

6.02 x 10²³ atoms

Explanation:

Given parameters:

Number of moles CaSO₄ = 1 mole

Unknown:

Number of Ca atoms in the given compound = ?

Solution:

The given compound is:

          CaSO₄

     1 mole of CaSO₄  is made up of 1 mole of Ca atoms

Now;

   1 mole of any substance contains 6.02 x 10²³ atoms

  1 mole of Ca atoms will also contain 6.02 x 10²³ atoms

Answer:

maybe 20 butvam not sure ooo