For a positively skewed distribution with a mode of x = 31 and a mean of 36, the median is most probably _________________.

a. less than 31

b. greater than 36

c. equal to 36

d. between 31 and 36

To find the equation of the parabola passing through the given points (3, 4), (-2, 9), and (2, 1), we can use the general form of a parabolic equation, which is y = ax² + bx + c.

By substituting the coordinates of the points into this equation, we can form a system of equations to solve for the coefficients a, b, and c. Using the point (3, 4), we get the equation 4 = 9a + 3b + c. From the point (-2, 9), we have 9 = 4a - 2b + c. Lastly, using the point (2, 1), we obtain 1 = 4a + 2b + c. This gives us a system of three linear equations.

By solving this system of equations, we find that a = -1/5, b = -9/5, and c = 18/5. Substituting these values back into the general form of the parabolic equation, we have y = (-1/5)x² - (9/5)x + (18/5). To express the equation in standard form, we need to remove fractions and put the equation in the form of ax² + bx + c = 0. By multiplying through by 5 to eliminate the fractions, we get -x² - 9x + 18 = 0.

Therefore, the equation of the parabola passing through the given points (3, 4), (-2, 9), and (2, 1) is -x² - 9x + 18 = 0, written in standard form.

Learn more about parabola here: brainly.com/question/11911877

#SPJ11

A written proof for Theorem 10.17 is provided here:

Theorem 10.17 states:

Given: A tangent line JK and a secant line JM.

To Prove: JK² = JL * JM.

Proof:

1. Draw a diagram with tangent line JK and secant line JM intersecting at point J.

2. By the tangent-secant theorem, the square of the length of the tangent segment JK is equal to the product of the length of the secant segment JM and its external segment JL. This can be represented as JK² = JL * JM.

Therefore, Theorem 10.17 is proven.

Visit here to learn more about secant line brainly.com/question/30162649

#SPJ11

The given data presents the marginal effects estimated from a probit model. Each row represents a variable, and the corresponding values show the marginal effect, standard error, z-statistic, and p-value. The marginal effect, represented as dF/dx, measures the change in the probability of the dependent variable (usually a binary outcome) resulting from a one-unit change in the independent variable.

In a probit model, the marginal effects provide insights into how changes in the independent variables affect the probability of the dependent variable. The estimated marginal effects indicate the direction and significance of these effects.

For example, a positive marginal effect indicates that an increase in the corresponding independent variable leads to a higher probability of the outcome occurring. Conversely, a negative marginal effect suggests a decrease in the probability. The standard error quantifies the uncertainty associated with the marginal effect estimate, and the z-statistic and p-value assess the statistical significance of the effect.

The significance codes provided (***, **, *, etc.) indicate the level of significance at which the null hypothesis (no effect) can be rejected. Lower p-values suggest higher significance. Researchers can use these results to understand the relative importance of different variables in influencing the probability of the outcome.

It's important to note that interpreting marginal effects requires considering the context of the model, the specific variables involved, and any assumptions made during estimation.

Learn more about probit model here:

https://brainly.com/question/29608754

#SPJ11

The term Rk2 refers to multiple concepts related to regression analysis. It can refer to the R-square statistic evaluated at the kth observation in the data and an R-square statistic obtained by regressing the kth explanatory variable on all other explanatory variables. However, it does not refer to the sum of the residuals obtained by regressing the kth explanatory variable on all other explanatory variables or the adjusted R-square statistic.

The R-square statistic measures the proportion of the variation in the dependent variable that can be explained by the independent variables in a regression model. When evaluated at the kth observation, it provides a measure of how well the model fits that specific data point. It is computed by squaring the correlation between the observed and predicted values at that particular observation.

On the other hand, Rk2 can also refer to an R-square statistic obtained by regressing the kth explanatory variable on all other explanatory variables. This measures the proportion of the variation in the kth explanatory variable that can be explained by the remaining explanatory variables in the model.

However, Rk2 does not represent the sum of the residuals obtained by regressing the kth explanatory variable on all other explanatory variables. The residuals represent the differences between the observed and predicted values in a regression model.

Similarly, Rk2 does not represent the adjusted R-square statistic, which adjusts the R-square statistic for the number of variables in the model and the sample size, providing a more robust measure of the model's goodness of fit.

Learn more about regression here:

https://brainly.com/question/31638132

#SPJ11

The solution to the equation is p = -72.

The equation, we need to isolate the variable 'p' on one side of the equation. Let's go through the steps:

-p/12 = 6

To get rid of the fraction, we can multiply both sides of the equation by 12:

12 * (-p/12) = 12 * 6

This simplifies to:

-p = 72

To isolate 'p,' we can multiply both sides of the equation by -1:

(-1) * (-p) = (-1) * 72

This gives us:

p = -72

Therefore, the solution to the equation is p = -72.

To learn more about equation

brainly.com/question/29657983

#SPJ11

Answer: 13 FEET

Step-by-step explanation:

Given that: window is rectangular in shape,

                width = 5 feet

               length = 12 feet

    one diagonal = 13 feet

To find: length of other diagonal

Solution: As one of the rectangle's property says that: length of both the diagonals of rectangle is same

Therefore, length of other diagonal will be 13 feet.

The statement "In an isosceles triangle ABC, m∠B = 90" is sometimes true.

An isosceles triangle is a triangle that has at least two sides of equal length. In the given statement, it is stated that ∠B (angle B) measures 90 degrees. However, this information alone does not determine whether the triangle is isosceles or not.

To determine if ΔABC is isosceles, we need additional information about the lengths of its sides. If we have additional information stating that two sides of the triangle are congruent, then we can conclude that the triangle is isosceles.

Therefore, without any information about the side lengths, we cannot definitively say that the triangle ΔABC is isosceles based solely on the statement that ∠B = 90 degrees.

Learn more about triangle  from

https://brainly.com/question/17335144

#SPJ11

The zeros of f(x) are 1, -10, and -2.

To find the zeros of the function[tex]f(x) = x^3 + 11x^2 + 8x - 20[/tex] algebraically, we need to solve the equation f(x) = 0.

There are several methods to find the zeros, and one commonly used approach is the factor theorem and polynomial long division.

Begin by trying possible integer values as potential zeros.

In this case, we can use the rational root theorem to narrow down the options.

The possible rational roots are factors of the constant term (-20) divided by factors of the leading coefficient (1).

Possible rational roots: ±1, ±2, ±4, ±5, ±10, ±20

Test each potential zero using synthetic division or polynomial long division until a zero is found.

Trying x = 1:

Applying synthetic division:

1 | 1 11 8 -20

| 1 12 20

Copy code

1   12  20    0

Since the remainder is zero, x = 1 is a zero of the function.

After finding one zero, we can factor the polynomial by dividing it by (x - 1) using polynomial long division or synthetic division.

The result is a quadratic equation:

[tex](x - 1)(x^2 + 12x + 20) = 0[/tex]

Solve the quadratic equation [tex]x^2 + 12x + 20 = 0[/tex] using factoring, completing the square, or the quadratic formula.

Factoring: (x + 10)(x + 2) = 0

Setting each factor to zero:

x + 10 = 0 or x + 2 = 0

x = -10 or x = -2

The zeros of the function [tex]f(x) = x^3 + 11x^2 + 8x - 20[/tex] are x = 1, x = -10, and x = -2.

For similar question on polynomial long division.

https://brainly.com/question/31941778

#SPJ8

he seven steps of Operations Research (OR) provide a systematic framework for problem-solving.

Operations Research (OR) involves seven key steps. First, the problem is defined, followed by gathering relevant data. A mathematical model is then formulated to represent the problem. Solutions are derived from the model, and the model is subsequently tested to ensure its validity. Once validated, preparations are made to apply the model in practical scenarios, and finally, the model is implemented.

Operations Research (OR) is a systematic approach to problem-solving that utilizes mathematical models and analytical methods. The first step in OR is defining the problem. This involves clearly understanding the issue at hand, identifying the objectives, and setting specific goals to be achieved.

After defining the problem, the next step is gathering the necessary data. Accurate and relevant data is crucial for building an effective mathematical model. This data can be collected through various means, such as surveys, interviews, or existing databases.

With the data in hand, the third step is to formulate a mathematical model. The model represents the problem in a structured and quantifiable manner. It incorporates various variables, constraints, and relationships that exist within the problem domain.

Once the mathematical model is formulated, the fourth step involves deriving solutions from the model. This is done through mathematical techniques like optimization, simulation, or queuing theory. The aim is to find the best possible solutions that meet the defined objectives.

To ensure the reliability and accuracy of the model, the fifth step involves testing it. This includes validating the model's results and assessing its performance under different scenarios. If necessary, adjustments and refinements are made to improve the model's effectiveness.

After the model is tested and validated, the sixth step is preparing to apply the model in practical situations. This involves considering factors like resource allocation, implementation strategies, and potential challenges that may arise during the application of the model.

The final step is the implementation of the model. This involves putting the solutions derived from the model into action. It requires effective communication, coordination, and collaboration among relevant stakeholders to ensure a smooth and successful implementation process.

In conclusion, the seven steps of Operations Research (OR) provide a systematic framework for problem-solving. By following these steps, organizations can optimize their decision-making processes and improve efficiency in various domains such as logistics, supply chain management, finance, and healthcare.

Learn more about mathematical model visit:

brainly.com/question/33757107

#SPJ11

Both g(x) and h(x) are functions involving more than just the variable x, satisfying the condition that neither of them is solely x.

Given: f(x) = 2 / (5x - 1)

Let's start by identifying g(x) and h(x) separately.

We can see that the outer function g(x) involves dividing a constant (2) by a quantity.

Therefore, g(x) = 2 / x can be a suitable candidate.

Now, let's consider the inner function h(x). The expression within the denominator, 5x - 1, can be a good candidate for h(x) as it includes the variable x.

Therefore, h(x) = 5x - 1.

Now, we can rewrite f(x) as g(h(x)):

f(x) = g(h(x)) = 2 / h(x)

               = 2 / (5x - 1)

So, g(x) = 2 / x and h(x) = 5x - 1.

Learn more about Variables here:

brainly.com/question/15078630

#SPJ11

There are no solutions to the equation |2x - 3| = -1.

The absolute value equation given is:

|2x - 3| = -1

Absolute values are always non-negative, so it is not possible for the absolute value of an expression to equal -1. Therefore, there are no solutions to this equation.

If we assume that the absolute value expression is positive, we can set it equal to the positive value on the right-hand side:

2x - 3 = 1

Adding 3 to both sides:

2x = 4

Dividing both sides by 2:

x = 2

However, upon checking this solution, we find that it does not satisfy the original equation:

|2(2) - 3| = |-1| = 1 ≠ -1

Therefore, there are no solutions to the equation |2x - 3| = -1.

Learn more about Absolute Values:

https://brainly.com/question/12928519

#SPJ4

The equation of a hyperbola given its foci and vertices, we need to determine the centre and key parameters of the hyperbola  is [tex]\dfrac{x^{2} }{4} } -\dfrac{y^{2} }{{2} } = 1[/tex]

The vertices are (±2, 0), the centre is at (0, 0).

The distance between the centre and each vertex is known as the "semi-major axis" (a). In this case, a = 2.

The distance between the centre and each focus is known as the "c" value. In this case, c = √5.

The equation of a hyperbola with its centre at the origin (0,0) is given by:

[tex]\dfrac{x^{2} }{a^{2} } -\dfrac{y^{2} }{b^{2} } = 1[/tex]

Where b represents the "semi-minor axis."

The relationship between a, b, and c in a hyperbola is ;

[tex]c^2 = a^2 + b^2[/tex]

Squaring both sides and substituting the known values, we have:

[tex](\sqrt {5)}^2 = (2)^2 + b^2[/tex]

[tex]5 = 4 + b^2\\b^2 = 5 - 4\\b^2 = 1\\b = 1[/tex]

Now we have all the required values to write the equation of the hyperbola:

[tex]\dfrac{x^{2}}{4} - y^{2} = 1[/tex]

[tex]\dfrac{x^{2} }{4} } -{y^{2} } = 1[/tex]

Therefore, the equation of the hyperbola with the given foci (± √5, 0) and vertices (± 2, 0) is:

[tex]\dfrac{x^{2} }{4} } -\dfrac{y^{2} }{{2} } = 1[/tex]

Learn more about Hyperbola here :

https://brainly.com/question/27799190

#SPJ4

The equation of the hyperbola with the given foci and vertices is: x²/4 - y² = 1

To write the equation of a hyperbola with the given foci and vertices, we can start by considering the standard form of a hyperbola:

(x - h)² / a² - (y - k)² / b² = 1

Given the foci (±√5, 0) and vertices (±2, 0)

Center:  the x-coordinate of the center is the average of the x-coordinates of the vertices, and the y-coordinate remains at 0.

Center = ((2 + (-2)) / 2, 0) = (0, 0)

Distance : The distance from the center to one of the vertices is given as 2.

Therefore, a = 2.

Distance from the center to the foci along the x-axis (c): The distance from the center to one of the foci is √5. Therefore, c = √5.

Using the relationship between 'a', 'b', and 'c' in a hyperbola (c² = a² + b²),

(√5)² = (2)² + b²

5 = 4 + b²

b² = 1

b = 1

Now,(x - 0)² / 2² - (y - 0)² / 1² = 1

x² / 4 - y² = 1

Therefore, the equation of the hyperbola with the given foci and vertices is: x²/4 - y² = 1

Learn more about equation of hyperbola here:

https://brainly.com/question/30995659

#SPJ4

Based on the available information, the exponential version appears to better constitute the fashion of U.S Federal Spending through the years. The vast increases in spending endorse an exponential increase pattern, indicating a higher probability of persevered exponential growth inside destiny.

Based on the given facts for U.S Federal Spending over time, let's evaluate two viable models:

Model 1: Linear Model

Model 2: Exponential Model

To decide which model great suits the information, we will take a look at the tendencies and styles inside the information factors.

Using the linear model, we are able to calculate the annual boom in federal spending:

From 1965 to 1980 (15 years), there may be an increase of $670 billion ($1,300 billion - $630 billion), averaging approximately $44.67 billion according to 12 months.

From 1980 to 1995 (15 years), there was a growth of $650 billion ($1,950 billion - $1,300 billion), averaging approximately $43.33 billion in line with yr.

From 1995 to 2005 (10 years), there may be an increase of $700 billion ($2,650 billion - $1,950 billion), averaging about $70 billion in step with year.

Using the exponential version, we can calculate the compound annual boom fee (CAGR):

From 1965 to 2005 (40 years), the spending expanded with the aid of $2,020 billion ($2,650 billion - $630 billion).

Calculating the CAGR, we discover that the average annual growth charge is approximately 5.18%.

Based on the information and evaluation, it seems that the exponential version is a better healthy for the United States Federal Spending over time. The data indicates a vast increase in spending through the years, suggesting an exponential boom sample as opposed to a linear one.

However, it's vital to notice that this analysis is based on a confined dataset, and further analysis can be required to decide the most accurate model for predicting future federal spending.

To know more about CAGR,

https://brainly.com/question/31326621

#SPJ4

The distance between the points W(7,3) and Z(-4,-1) is approximately 13.93 units.

To find the distance between two points in a coordinate plane, we can use the distance formula:

Distance = √[tex]((x2 - x1)^2 + (y2 - y1)^2)[/tex]

In this case, the coordinates of point W are (7,3) and the coordinates of point Z are (-4,-1).

Plugging the values into the distance formula, we get:

Distance = √[tex]((-4 - 7)^2 + (-1 - 3)^2)[/tex]

        = √[tex]((-11)^2 + (-4)^2)[/tex]

        = √(121 + 16)

        = √137

        ≈ 13.93

Therefore, the distance between points W(7,3) and Z(-4,-1) is approximately 13.93 units.

LEARN MORE ABOUT distance here: brainly.com/question/15256256

#SPJ11

The mean price of nonfiction books on the best-sellers list is $25.07, with a standard deviation of $2.62. The individual prices of the books are $26.95, $22.95, $24.00, $24.95, $29.95, $19.95, $24.95, $24.00, $27.95, and $25.00.

The mean price of $25.07 represents the average price of the nonfiction books on the best-sellers list. It is calculated by summing up all the prices and dividing the total by the number of books (10 in this case).

The standard deviation of $2.62 measures the variability or spread of the prices around the mean. It provides a measure of how much the prices deviate from the average. A lower standard deviation indicates that the prices are closer to the mean, while a higher standard deviation suggests greater variability.

Looking at the individual prices, we can see that they range from $19.95 to $29.95. These prices contribute to the overall mean and standard deviation. If a price is significantly higher or lower than the mean, it will have a greater impact on the standard deviation.

In this case, the prices appear to be relatively close to the mean, with some variation. This suggests that the prices of nonfiction books on the best-sellers list are centered around $25.07, but there are some books priced slightly higher or lower.

The mean and standard deviation provide valuable information about the distribution of prices on the best-sellers list, allowing us to understand the central tendency and variability of the data.

Learn more about deviation here: brainly.com/question/31835352

#SPJ11

The polynomial equation in which 1+√2 is the only root is:

x² - 2x - 1

To find a polynomial equation in which 1+√2 is the only root, we can use the concept of conjugate pairs.

Since 1+√2 is a root, its conjugate, 1-√2, must also be a root.

This is because the conjugate of a root of a polynomial with rational coefficients is always another root.

To construct the polynomial equation, we can start by setting up two factors using the roots:

(x - (1 + √2))(x - (1 - √2))

Expanding these factors:

(x - 1 - √2)(x - 1 + √2)

Using the difference of squares formula, (a - b)(a + b) = a² - b²:

((x - 1)² - (√2)²)

Simplifying further:

(x² - 2x + 1 - 2)

Combining like terms:

x² - 2x - 1

Therefore, the polynomial equation in which 1+√2 is the only root is:

x² - 2x - 1

Learn more about Polynomial here:

https://brainly.com/question/11536910

#SPJ4

The given quadratic inequality is [tex]x^2 - 32 \geq 4x(x+6)(x-3) > -8\)[/tex]. To solve this inequality, we need to find the values of [tex]\(x\)[/tex] that satisfy the given conditions.

To solve the quadratic inequality[tex]\(x^2 - 32 \geq 4x(x+6)(x-3) > -8\)[/tex], we can break it down into two separate inequalities and solve them individually.

1)[tex]\(x^2 - 32 \geq 4x(x+6)(x-3)\)[/tex]:

We start by simplifying the expression on the right side:

[tex]\(4x(x+6)(x-3) = 4x(x^2 + 3x - 18) = 4x^3 + 12x^2 - 72x\).[/tex]

The inequality becomes:

[tex]\(x^2 - 32 \geq 4x^3 + 12x^2 - 72x\).[/tex]

Next, we rearrange the terms to form a quadratic equation:

[tex]\(4x^3 + 12x^2 - x^2 - 72x - 32 \geq 0\).[/tex]

Simplifying further:

[tex]\(4x^3 + 11x^2 - 72x - 32 \geq 0\).[/tex]

2) [tex]\(4x(x+6)(x-3) > -8\):[/tex]

Following the same process as before, we simplify the expression:

[tex]\(4x(x+6)(x-3) = 4x^3 + 12x^2 - 72x\)[/tex].

The inequality becomes:

[tex]\(4x^3 + 12x^2 - 72x > -8\)[/tex].

Finally, by solving each inequality separately, we can determine the values of [tex]\(x\)[/tex]that satisfy the given conditions.

Learn more about quadratic equations here:

https://brainly.com/question/30098550

#SPJ11

To find the volume of the solid obtained by rotating the region bounded by the curves y = 2x and y = 2x about the line y = 2, the method of cylindrical shells can be used.

When rotating the region bounded by the curves y = 2x and y = 2x about the line y = 2, we can visualize the resulting solid as a collection of infinitesimally thin cylindrical shells.

The height of each shell is given by the difference between the lines y = 2 and the curve y = 2x, which is 2 - 2x. The circumference of each shell is given by 2πx since the shell is formed by rotating a line segment of length x.

Integrating the product of the height and circumference over the range of x where the curves intersect (from x = 0 to x = 1), we can find the volume of the solid using the formula V = ∫(2πx)(2 - 2x) dx. Evaluating this integral will yield the volume of the solid.

Learn more about Cylindrical shell methods here :

brainly.com/question/33182921

#SPJ11

The distance between each pair of points is given by the distance formula which is stated below; Distance formula. The distance formula is used to find the distance between two points in the coordinate plane. The distance formula is derived from the Pythagorean theorem. So, the distance between each pair of points is √101`

The distance formula is given as; d = √((x2-x1)² + (y2-y1)²), Where; x1, x2 are the x-coordinates of points 1 and 2. y1, y2 are the y-coordinates of points 1 and 2

Applying the distance formula to the given pair of points, (0, 6) and (-1, -4), we have;`x1 = 0`,`x2 = -1`,`y1 = 6`, and `y2 = -4`. Therefore, the distance between each pair of points is; d = √((-1 - 0)² + (-4 - 6)²)d = √((-1)² + (-10)²)d = √(1 + 100)d = √101 Answer: `√101`

For more questions on: distance formula

https://brainly.com/question/30395212

#SPJ8  

While Marsha, Jan, and Cindy individually have transitive preferences over three goods, it is possible that the group's preferences might not be transitive when deciding on the "fruit of the month."

This scenario arises due to the aggregation of individual preferences and the potential conflicts that can emerge during the voting process.

When individuals vote on their preferred fruit of the month, the group's preference is determined by aggregating individual preferences. However, the aggregation process can lead to inconsistencies in transitivity. For example, let's assume Marsha prefers oranges to apples, Jan prefers apples to pears, and Cindy prefers pears to oranges.

Individually, their preferences are transitive. However, when their preferences are aggregated, conflicts arise. If the group votes between oranges and apples, Marsha's preference would favor oranges, Jan's preference would favor apples, and the group might choose apples as the fruit of the month. Similarly, if the group votes between apples and pears, Jan's preference would favor apples, Cindy's preference would favor pears, and the group might choose pears.

Now, if the group votes between oranges and pears, Marsha's preference would favor oranges, Cindy's preference would favor pears, but there is no unanimous preference between apples and pears. In this case, the group's preference would not be transitive because oranges are preferred to apples, apples are preferred to pears, but oranges are not preferred to pears.

This example demonstrates that the aggregation of individual preferences in a voting process can lead to situations where the group's preferences are not transitive.

Learn more about transitive visit:

brainly.com/question/2437149

#SPJ11

In a function, each input should have a unique output. But in this case, the input 8 is associated with multiple outputs, violating the definition of a function.

To determine if a relation is a function, we need to check if each input (x-value) is associated with only one output (y-value). In this case, let's analyze the given relation:

(8,4),(8,3),(8,-1),(8,6)

The x-value is always 8 for each ordered pair. However, the y-values associated with 8 are different in each case. Since one input (8) is mapped to multiple outputs (4, 3, -1, 6), this relation is not a function.

In a function, each input should have a unique output. But in this case, the input 8 is associated with multiple outputs, violating the definition of a function.

Learn more about function  from

https://brainly.com/question/11624077

#SPJ11

When the horizontal and the vertical lines crosses each other forming a square, the structure so formed is called pattern .

Let's consider a simple pattern where each figure consists of a square grid, and the number of squares in each row and column increases by 1 with each figure. They help to form the base layout for the designers.

In the first figure (n = 1), we have a 1x1 grid, which contains 1 square.

For n= 1  ;

where we have a grid 0f [tex]1 \times 1[/tex] .

The figure  so formed taking [tex]1\times 1[/tex] Grid is attached below in the image form .

Learn more about patterns here :

https://brainly.com/question/30571451

#SPJ4

The remainder when n is divided by 36 is equal to n.

To find the remainder when the integer [tex]$n$[/tex] is divided by 36, we can consider the divisibility rule for 36. A number is divisible by 36 if it is divisible by both 4 and 9.

First, let's look at the divisibility by 4. A number is divisible by 4 if the last two digits of the number form a multiple of 4. In this case, the last two digits of n are 73. Since 73 is not divisible by 4, we can conclude that n is not divisible by 4.

Next, let's examine the divisibility by 9. A number is divisible by 9 if the sum of its digits is divisible by 9. In this case, the sum of the digits in n is 13 \times 7 + 17 \times 3 = 91 + 51 = 142. Since 142 is not divisible by 9, we can conclude that n is not divisible by 9.

Since n is not divisible by either 4 or 9, it will not be divisible by 36. The remainder when n is divided by 36 is equal to n itself.

The remainder when n is divided by 36 is equal to n.

For more such questions on remainder

https://brainly.com/question/29347810

#SPJ8

Answer:

look at attachment

Step-by-step explanation:

The answer is:

Work/explanation:

First, I will use the slope formula to find slope:

[tex]\sf{m=\dfrac{y_2-y_1}{x_2-x_1}}[/tex]

where:

m = slope;

(x₁, y₁) and (x₂, y₂) are points on the line.

Plug in the data:

[tex]\sf{m=\dfrac{-2-3}{4-2}}[/tex]

[tex]\sf{m=\dfrac{-5}{2}}[/tex]

[tex]\sf{m=-\dfrac{5}{2}}[/tex]

So far, the equation is y = -5/2x + b.

Now, we'll use the first point (2,3) and plug it into the equation to solve for b.

3 = -5/2 (2) + b

3 = -5 + b

-5 + b = 3

b - 5 = 3

b = 3 + 5

b = 8

The average rate of change of the function [tex]f(x) = x^2 - 9x[/tex]over the interval [1, 3] is -8.  This means that, on average, the function decreases by 5 units for every 1 unit increase in x within the given interval.

To find the average rate of change, we need to calculate the difference in the function values divided by the difference in the corresponding x-values. In this case, the function values at the endpoints of the interval are[tex]f(1) = 1^2 - 9(1) = -8[/tex] and [tex]f(3) = 3^2 - 9(3) = -18[/tex]. The corresponding x-values are 1 and 3.

The formula for average rate of change is:

Average Rate of Change = (f(b) - f(a)) / (b - a)

Substituting the values into the formula, we have:

Average Rate of Change = (-18 - (-8)) / (3 - 1) = -10 / 2 = -5

Therefore, the average rate of change of the function over the interval [1, 3] is -5. This means that, on average, the function decreases by 5 units for every 1 unit increase in x within the given interval.

Learn more about average rate of change here: https://brainly.com/question/13235160

#SPJ4

The length of the side of the original square cardboard, x, is 13 inches.

Let's solve the problem step by step:

We start with a square piece of cardboard with side length x.

We cut 4-in squares from each corner. This reduces the dimensions of the cardboard by 8 inches in both length and width. Therefore, the dimensions of the resulting box will be (x - 8) inches by (x - 8) inches.

We fold up the sides to create the box.

The volume of a rectangular box is given by the formula V = length × width × height.

In this case, the height is 4 inches because we have folded up the sides.

According to the problem, the box should hold 100 cubic inches, so V = 100 cubic inches.

Plugging in the values, we have (x - 8) × (x - 8) × 4 = 100.

Simplifying the equation, we get (x - 8)^2 = 25.

Taking the square root of both sides, we have x - 8 = ±5.

Solving for x, we get two possible solutions: x - 8 = 5 or x - 8 = -5.

If x - 8 = 5, then x = 13.

If x - 8 = -5, then x = 3.

However, we must consider that the box needs to have positive dimensions. Therefore, the valid solution is x = 13.

Thus, the length of the side of the original square cardboard, x, is 13 inches.

Learn more about  length from

https://brainly.com/question/2217700

#SPJ11

In a rhombus, opposite angles are congruent. Therefore, if m∠PON is given as 124 degrees, then m∠POM is also 124 degrees.

In a rhombus, opposite angles are congruent. However, we cannot determine the measure of angle POM solely based on the given information about angle PON.

To find the measure of angle POM, we would need additional information such as the measures of other angles or side lengths within the rhombus MNOP.

Without further information, we cannot determine the specific measure of angle POM in this case.

Learn more about  rhombus from

https://brainly.com/question/88523

#SPJ11

The property of real numbers illustrated by the equation -(2t - 11) = 11 - 2t is the commutative property of addition.

Given that an expression we need to determine which property does it follow,

The commutative property of addition states that the order of numbers can be changed without affecting the result when adding them together. In other words, for any real numbers a and b, the sum of a and b is the same regardless of the order in which they are added.

In the given equation, we can observe that the terms on both sides of the equation involve addition and subtraction. By rearranging the terms, we can rewrite the equation as 11 - 2t = -(2t - 11).

This shows that the terms 11 and 2t have been swapped in their positions without altering the equality of the equation. This swap of terms demonstrates the commutative property of addition.

So, the commutative property of addition is illustrated in the equation -(2t - 11) = 11 - 2t by the interchangeability of the terms without affecting the solution or outcome.

Learn more about commutative property of addition click;

https://brainly.com/question/28762453

#SPJ4

The conjecture is true that is ∠1 and ∠2 are supplementary angles, then ∠1 and ∠2 form a linear pair.

Given that,

We have to determine whether each conjecture is true or false. If ∠1 and ∠2 are supplementary angles, then ∠1 and ∠2 form a linear pair.

We know that,

Supplementary angle is defined as the sum of the any two angles should be 180°.

Linear pair is nothing but the two angles which are lies on the same line.

So,

From the figure ∠1 and ∠2 are supplementary angles because sum of the two angles is 180° and ∠1 and ∠2 form a linear pair because they lie on the same line.

Therefore, the conjecture is true.

To know more about angle visit:

https://brainly.com/question/2396507

#SPJ4

The 20th digit of p after the decimal point is 0 because the probability of guessing the password correctly after 20 tries is a very small value.

Since the password is 1 digit long initially and each incorrect guess increases its length by 1 digit, the number of possible passwords for each length is 9 (from 1 to 9). The probability of guessing the correct password on the first try is 1/9. If the guess is incorrect, the password length increases to 2 digits, and the probability of guessing correctly on the second try is 1/90 (1/10 for the leading digit and 1/9 for the second digit). Similarly, for each subsequent guess, the probability of guessing correctly decreases by a factor of 10 because there is one more digit to guess.

Therefore, the probability distribution can be represented as a geometric series with a common ratio of 1/10. The probability of guessing correctly on the nth try is given by the formula p_n = (1/9) * (1/10)^(n-1).

To find the 20th digit of p after the decimal point, we need to calculate p_20. Substituting the values into the formula, we have p_20 = (1/9) * (1/10)^(20-1) = (1/9) * (1/10)^19.

The expression (1/10)^19 is a very small value, and when multiplied by 1/9, the result is even smaller. As a result, the 20th digit of p after the decimal point is 0.

In summary, the 20th digit of p after the decimal point is 0 because the probability of guessing the password correctly after 20 tries is a very small value.

Learn more about decimal here : brainly.com/question/30958821

#SPJ11