Generation of electricity in coal-burning power plants and nuclear power plants both involve (b)heating water to produce steam which drives a turbine.
Define nuclear energy.
The creation of electricity by nuclear reactions is known as nuclear power. Nuclear reactions such as nuclear fission, nuclear decay, and nuclear fusion can all provide nuclear energy. Nuclear power plants currently generate the great majority of the world's electricity from nuclear energy through the fission of uranium and plutonium.
Nuclear fission heats the water in the center of the planet, which is then fed through heat exchanger tubes after being heated. These tubes warm an additional water source to produce steam. After that, the steam operates an electric generator to generate electricity. Repetition of the process involves the core water cycling back to the reactor for reheating.
To learn more about nuclear power, use the link given
https://brainly.com/question/27815195
#SPJ4
the ncees model rules of conduct provides codes that engineers can use in real-world applications involving what?
The NCEE's model rules of conduct provides codes that engineers can use in real-world applications involving option A: Ethics.
What rules of behavior apply to engineers?Engineers are prohibited from making false or deceptive claims in an effort to recruit engineers away from another employer. It is forbidden for engineers to further their own interests at the expense of the honor and integrity of their profession. Engineers are required to treat everyone equally, fairly, and with dignity.
Hence, Engineering ethics primarily addresses the standards for conduct for engineers. Recommendations for suitable norms or policies for morally upright conduct.
Learn more about Ethics from
https://brainly.com/question/13969108
#SPJ1
See full question below
The NCEES Model Rules of Conduct provides codes that engineers can use in real-world applications involving what?
Ethics
Design
Problem Solving
Buildings
an engineer configures a static ipv4 route on router r1. which of the following pieces of information should not be listed as a parameter in the configuration command that creates this static ipv4 route?
an engineer configures a static ipv4 route on router r1. The next-hop router's neighboring interface should not be listed as a parameter configuration command that creates this static ipv4 route.
What is static routing?
System administrators generally steer clear of static routing if they can help it because it necessitates manually configuring routes for each router or destination. Network reachability is not based on the network's own state with static routing, which is a drawback.
Static routes continue to exist in the routing table and traffic is still forwarded in the direction of an unreachable or down destination despite the configuration of the route being static.
To learn more about static routing, use the link given
https://brainly.com/question/29495803
#SPJ4
Show the State Definition Table, State Transitions Diagram, Transition Table, Karnaugh Maps, Min SOP form and schematic, using a MealyMachine, and use D flip
: 15? Vending Machine Design
Assumptions
Only N or D can be 1 during any one clock pulse.
We won?t give change.
Reset the machine on next clock pulse after vending.
An asynchronous reset signal applied on ?power-up
Upon asserting the reset signal, an asynchronous reset begins to operate. When the reset signal is asserted, a synchronous reset starts up on the active clock edge.
Explain about the asynchronous reset?Depending on the type of logic being reset and the needs of the project, a synchronous reset or an asynchronous reset should be chosen.
The signal de-assertion is a factor in the asynchronous reset issue. The output of the flip-flop could enter a metastable condition and violate the flip-reset flop's recovery time if an asynchronous reset releases at or near the active clock edge.
Asynchronous reset can take advantage of specific flip-flop input pins that do not effect data route timing, has lower latency than synchronous reset, and does not require an active clock to bring flip-flops to a known state.
To learn more about asynchronous reset refer to:
https://brainly.com/question/10057909
#SPJ4
Answer the following questions about when main() is run (assume x and y stored on the Stack and there is one stack frame per function): int main() { int i, X = 0; for(i=0; i<3; i++) { x = randSum(x); } printf("x = %d\n",x); return 0; } int randSum(int n) { int y = rand()%20; return n+y: } Q13.1 0.5 Points Which one has the higher/larger address: x or y? ох Oy Save Answer Q13.2 0.5 Points How many total stack frames are created (in decimal)? Enter your answer here Save Answer Q13.3 0.5 Points What is the maximum depth (# of frames) of the Stack? Enter your answer here
Our capacity to inspire our team members will be significantly impacted by the strategy you use.
Therefore, it's critical to comprehend how our management style may be influenced by your ideas of what drives people. The two theories will now be examined in greater detail as we learn how and when to apply them in the workplace. The adoption of Theory X management may be unavoidable for large organizations due to the sheer number of employees they have and the strict deadlines they must meet, even though it has largely lost favor in recent years. An x86-64 procedure uses only those mechanisms required for that procedure
P(…) {
•
y = Q(x);
print(y)
}
int Q(int i)
{
int t = 3*i;
int v[10];
•
return v[t];
}
Learn more about mechanism here-
https://brainly.com/question/20434227
#SPJ4
A driver who notices that an emergency vehicle is approaching should do which of the following ? A. Drive to the extreme right and stop; B. In bumper to bumper traffic, as in a stau, move to the extreme right from the right hand lane and to the extreme left from the left hand lane to form a passageway in the middle; C. Both of the above
Await the passing of the emergency vehicle. Keep an eye out for multiple emergency vehicles as they approach. Before reentering traffic, make sure the road is clear.
How do you respond to emergency vehicles?As soon as you can, stop parallel to the road, as close to the curb as you can. Generally speaking, you should stop to the right. Use your turn signal and make sure you are not in the middle of an intersection.Once the emergency vehicle has passed, and it is obvious that no further emergency vehicles are coming, stop and stay still.When the emergency vehicle has passed, courtesy dictates that you let drivers in front of you to re-enter the road. Make use of the turn signal.Avoid driving within 150 meters of an emergency vehicle that is flashing its lights or siren. As a point of comparison, 150 m is almost 1.5 times as long as a football field.Therefore, both of the above options are correct.
To learn more about emergency vehicle, refer to
https://brainly.com/question/29518955
#SPJ4
which one of the following is not an advantage of precast concrete structural elements (slabs, beam, etc.) compared to onsite cast-in-place concrete structural elements?
Potential long lead time due to plant backlogs which can impact the project schedule.
What is Precast concrete?
Precast concrete, also known as "prefabricated" or "pre-made" concrete, is a type of concrete that is produced off-site before being transported to the project's location for use.
In low- and mid-rise residential buildings, hotels, motels, and nursing homes, precast concrete is frequently employed. The concrete lowers fire insurance costs while providing the individual units with improved fire protection and sound abatement. Another widely used material for creating offices is precast concrete.
Precast is a minimum 4" thick concrete panel technology that, by displaying the lovely aggregates used in the mix patterns, mimics the appearance of various natural stones and granites.
To learn more about Precast concrete:
https://brainly.com/question/23127906
#SPJ4
The cost of wages paid to employees directly involved in the manufacturing process in converting materials into finished products is classified as
a. direct labor cost
Direct labor cost is the cost of wages paid to employees directly involved in the manufacturing process in converting materials into finished products.
What is Direct labor cost?
Wages incurred in order to produce goods or provide services to customers are referred to as direct labor costs. The total direct labor cost is far greater than the wages paid. It also includes payroll taxes on those wages, as well as the cost of employer-paid medical insurance, life insurance, workers' compensation insurance, any company-matched pension contributions, and other company benefits.
Direct labor costs are most commonly associated with products in a job costing environment, where Manufacturing employees are expected to record the time they spend working on various jobs. If employees work on a variety of different products, this can be a significant task.
To learn more about Manufacturing, visit: https://brainly.com/question/13440987
#SPJ4
body is a uniform rigid disk that rotates about the fixed center as shown, driven by a pure moment . body is a uniform thin rigid rod that connects pins and (with center ), and point is constrained to move in a slot. forces and are exerted on the rod by pins and , respectively, and there is no gravity or friction what is m
A free-falling object experiences a downward acceleration of magnitude, g, where g = 9.80 m/s2. The acceleration is caused by the gravitational force exerted by the earth on the object. Applying Newton's second law to an object in free fall yields W = mg, an equation that relates an object's mass and weight.
What is Acceleration of Gravity ?The free-body force diagram of an object sliding down a frictionless incline at an angle above the horizontal, N is the normal force exerted on the object by the incline's surface, and mg is the gravity force exerted on the object by the Earth, representing the object's weight.
The normal force is perpendicular to the incline's surface, and the gravity force is vertically downward, toward the Earth's center. Because the object's acceleration is parallel to the incline, we can set our x and y coordinate axes to be parallel and perpendicular to the incline's surface.The object's acceleration is then in the +x direction, and ax = a.The gravity force components along the coordinate directions
Applying
Fx= max returns mg sin = ma and a = g sin.
The object descends the incline at a constant rate of g sin.
One of the constant acceleration kinematic equations states that x = 1 2 at2 if the object starts at rest and travels a distance, x, down the incline in time, t.
This is equivalent to a = g sin
To learn more about Acceleration of Gravity refer to :https://brainly.com/question/88039
#SPJ4
For the following code, which statement is not true? public class Sphere { private double radius; public double x; private double y private double z; } Select one: O a. radius is not available to code written outside the Sphere class. b. radius, x, y, and z are called members of the Sphere class. c. z is available to code that is written outside the Sphere class, Od x is available to code that is written outside the Sphere class
The statement which is not true is z is available to code that is written outside the circle class.
What is meant Sphere class?Engineers must always prioritize the safety of society's citizens when performing their duties, according to the engineering code of ethics. It implies that throughout their career, engineers will work with approved standards-compliant materials and adhere to established engineering practices.A component of the JavaFX library is the Circle class. The circle class generates a circle with the supplied radius, specified fill, and specified x and y positions for the circle's center. The circles' centers and radii are expressed in pixels. The JavaFX group class is a component. A Group's node count is contained within it. A Group is not immediately resizable and will take on the aggregate boundaries of its offspring. Parent class inherits from Group class.To learn more about circle class refer to:
https://brainly.com/question/15561901
#SPJ4
5.1-9 a zero-order-hold circuit (fig. p5.1-9) is often used to reconstruct a signal g(t) from its samples. (a) find the unit impulse response of this circuit. (b) find and sketch the transfer function h( f ). (c) show that when a sampled signal g(t) is applied at the input of this circuit, the output is a staircase approximation of g(t). the sampling interval is ts.
Let s(t) be a continuous function (or "signal" to be sampled) for functions that change over time.
The sample interval or sampling period is determined by monitoring the value of the continuous function every T seconds. Calculating the sampling interval involves multiplying the population size by the desired sample size to arrive at the predetermined periodic interval. The time interval between two successive samples in a Sound is known as the sampling period. It is the sampling frequency's inverse. The samples are separated by about 23 microseconds, for instance, if the sampling frequency is 44100 Hz and the sampling period is 1/44100 = 2.2675736961451248e-05 seconds.
Learn more about frequency here-
https://brainly.com/question/12962869
#SPJ4
6. explain why injection molding is capable of producing parts with complex shapes and fine detail. can it be used for ceramics and metals?
When injection molding is performed a viscous liquid can flow into small and intricate cavities under pressure and the cool and solidify in the desired shape to fill any potential cracks and spaces.
What is injection molding?
The process is especially good for fine detailing and fixing small imperfections because of the attractive features of thermoplastics. The injection molds are subjected to a lot of the plastic within the molds is pressed harder against the mold than any other process.
It is possible to add a lot of details to the design of the part because of the high pressure.
It is able to be used for ceramics and metals.
To Know More About injection molding, Check Out
https://brainly.com/question/22936549
#SPJ4
g write a main function that generates a random number between 3 and 10 (included) and stores it in variable k; the function prompts the user to enter k integers on the same line and stores them in a list.
To produce a random number between 0 and 50, we can apply the formula randint(0,50). The function randrange(min,max) can be used to produce random numbers between 0 and 9.
To start generating random numbers, we in this software call the srand () function with the system clock. And to create random integers between 1 and 10, the module 10 operator calls the rand () function. Initialize the random number generator with srand(time(0)); By giving the increment, use the random.randrange() function to obtain a random integer number from the specified exclusive range. A random number between 0 and 20 will be returned, for instance, by the formula random.randrange(0, 10, 2).
Learn more about system here-
https://brainly.com/question/13151970
#SPJ4
A hydraulic system operates at a gauge pressure of 20 MPa and 55°C. The hydraulic fluid is SAE 10W oil. A control valve consists of a piston 25 mm in diameter, fitted to a cylinder with a mean radial clearance of 0.005 mm. Determine the leakage flow rate if the gauge pressure on the low pressure side of the piston is 1.0 MPa. Piston is 15 mm long. The gap between the piston and cylindrical valve is very small, the flow can be modeled as a flow between parallel plates. Assume that the flow is laminar in nature and solve for Q. For SAE 10W oil at 55°C, - - 0.018 kg/m.s, SG=0.92. Calculate average velocity of the fluid.
Thus flow is surely laminar, since Re<<1400
What is hydraulic fluid?Systems where power and energy are delivered through fluids are known as hydraulic systems. In many types of machinery, equipment, and throughout industries, fluids known as hydraulic fluids or hydraulic oils are employed.
Given: hydraulic fluid flowing as depicted between the piston and the cylinder. At 55°C, the fluid is SAE 10W oil.
Quantify the leakage flow rate.
Since there is barely any space between the plates, the flow can be described as flow between parallel plates. You might use Equation 8.6c.
Regulation equation:
Assumptions:
Laminar flow, first.
(2) Consistent flow
(3) Incremental flow
(4) A fully formed flow.
Consequently, flow has been laminar since Re 1400.
To learn more about hydraulic fluid refer to:
https://brainly.com/question/12977724
#SPJ4
a technician arrives on site to find that two users who have the same model of android smartphone are having the same issue with a specific application. whenever they attempt to launch the application, it fails and gives an error message. which of the following should the technician do first? group of answer choices
The technician will first update the OS of the smartphones when two users who have the same model of android smartphone are having the same issue with a specific application. When they try to launch the application, it fails with an error message.
What is Android?
Android is an open source operating system based on Linux that is designed for mobile devices such as smartphones and tablet computers. Android was developed in collaboration with the Open Handset Alliance, which was led by Go*gle, and other companies.
Android offers a unified approach to mobile device application development, which means that developers only need to develop for Android, and their applications should be able to run on a variety of Android-powered devices.
Go*gle released the first beta version of the Android Software Development Kit (SDK) in 2007, and the first commercial version, Android 1.0, in September 2008.
To learn more about Technician, visit: https://brainly.com/question/29566249
#SPJ4
a. consider a cpu implementation, m1. there are three classes of instructions (a, b, and c) in the instruction set. m1 has a clock rate of 80 mhz. the average number of cycles for each instruction class and their frequencies are as follows:
After switching instruction classes, the average MIPS rating is M2. A CPI of 52.6 is superior to that of 50.0.
(a) Determine the average CPI for M1 and M2 for each machine. Cycles per Instruction times Frequency of each equals Average CPI (CPI * F)
Cycles per Instruction/Clocks per Instruction for Machine M1 = (60%)
* 1 + (30%)*2 + (10%)*4\s = (0.60) * 1 + (0.30) * 2 + (0.10) (0.10) * 4
= 0.6 + 0.6 + 0.4
Cycles per Instruction/Clocks per Instruction for Machine M2: =1.6 (60%) *2 + (30%) *3 + (10%) *4\s = (0.60) *2 + (0.30) (0.30) * 3 + (0.10) (0.10) *4 \s = 1.2 + 0.9 + 0.4\s = 2.5\s(b) (b) Determine the average MIPS ratings for M1 and M2 on each machine.
This formula can be used to determine the MIPS rating.
MIPS rating is equal to Instruction Count/Execution Time * 106.
= Clock cycle time * 106 * Instruction count / IC X CPI
Learn more about instruction here-
https://brainly.com/question/28309162
#SPJ4
An account on server A is more expensive than an account on server B. However, server A is faster. To see if it is optimal to go with the faster but more expensive server, a manager needs to know if server A is significantly faster than server B. A certain computer algorithm is executednA=30times on serverAandnB=20times on server B with sample mean and standard deviation of the performance speed of each server (in minutes): Atα=0.05, determine if server A is faster than server B using an appropriate significance test. AssumeσA2=σB2 Show all steps including hypotheses, rejection region, test statistic,p-value, and conclusion.
A distributed information technology (IT) architecture known as edge computing processes client data at the network's edge, as close to the original source as is practicable.
Data, which provides priceless business information and enables real-time management over vital corporate activities, is the lifeblood of modern company. Today, organizations practically anywhere in the globe have access to the massive amounts of data that can be routinely gathered from sensors and IoT devices working in real time from remote places and hostile operating environments. The virtual data flood is, however, also changing how firms approach computing.
Learn more about operating here-
https://brainly.com/question/27960749
#SPJ4
g the 10-kg rod ab is pin-connected at a and subjected to a couple moment of m space equals space 15 space n times m. if the rod is released from rest when the spring is unstretched at theta space equals space 30 degree comma determine the rod's angular velocity at the instant theta space equals space 60 degree. as the rod rotates, the spring always remains horizontal, because of the roller support at c.
Thus, N= 2l /3xF. Angular velocity is the speed at which an object spins about an axis, rotates, or alters the angle between two bodies.
Assume that the rod has mass m.
I= 1/3 ml is the rod's moment of inertia about its axis passing through its end and perpendicular to its plane.
Moment of force for the rotation of a rod is equal to the applied torque, which is 1/3 ml.
ml = 2/3xF for xF.
Angular acceleration about the is seen here as.
The center of mass is located in the middle.
Therefore, the center of mass's linear acceleration is a=2 l a=2 ml /3xF.
Therefore, the center of mass's vertical net force is equal to =ma = 2l /3xF.
This is to be n equal.
Thus, N= 2l /3xF.
Learn more about Speed here-
https://brainly.com/question/28988558
#SPJ4
Question 1: Using K-map (or truth table) find out which input pattern(s) can detect the AND-bridging fault on inputs C and D in the following circuit. (25pt) A AND 12 B 13 NOR Out С OR 15 NAND D
To detect the AND-bridging fault check the state of output for input combination m₁, m₅, m₉
If any 1 in m₁, m₅, m₉ is applied and output = 1, then it indicates AND-bridging in circuit. Therefore y₂ is the input pattern that can detect the AND-bridging fault.
What is bridging?In packet switched networks, the method of bridging is used for message forwarding. Bridging, as opposed to routing, locates unknown network devices by using the destination address contained in the message header.
The local area network (LAN) or Ethernet device discovery process is not predicated in any way by the bridging technique. Bridging, which is only intended for use on LANs, uses flooding in place of the other method. Once a network device has been found, its address is automatically saved in a table for later use.
Instead of trying to manage adjacent segments, bridging only regulates and manages the network traffic within a single network segment.
Learn more about bridging
https://brainly.com/question/14661976
#SPJ4
problem 6 (16 pts): (1) translate the following into first-order logic, (2) convert the resulting formulas into a canonical form, and (3) prove the theorem using resolution. given: 1. if a child is young, then he/she is adored. 2. every child who is adored and fed well is happy. 3. every child is fed well
When several statements are offered and a conclusion of those statements needs to be proven, resolution is used. A crucial idea in proofs by resolutions is unification.
A theorem-proving method called resolution starts by creating refutation proofs, or proofs by contradictions. John Alan Robinson, a mathematician, developed it in 1965.
When several statements are offered and a conclusion of those statements needs to be proven, resolution is used. A crucial idea in proofs by resolutions is unification. Resolution is a single inference rule that is effective with either the clausal form or the conjunctive normal form.
A clause is a disjunction of literals (sometimes known as an atomic phrase). It also goes by the name "unit clause."
Conjunctive Normal Form, or CNF, is the representation of a sentence as a conjunction of clauses.
To know more about statements click here:
https://brainly.com/question/2285414
#SPJ4
delete all artists that do not have a user-specified number of plays. in other words, ask the user for the minimum play count and then remove all dictionary entries that do not meet the minimum. rule: you must use a loop to find artists below the minimum play count in case the dictionary is ever modified.
There isn't a particular Python method that we use to update dictionaries. The assignment operator can be used with the dictionary key to add a new key to the dictionary.
This is essentially the same as giving the dictionary a new value. When you use the assignment operator on a Python dictionary, you are only adding new keys to the datastructure because dictionaries in Python are mutable. However, Matplotlib's style and user interface have started to age in recent years. The R language's ggplot and ggvis, as well as web visualization toolkits based on D3js and HTML5 canvas, can often make Matplotlib seem dated and clumsy.
entities_to_remove = ('a', 'b', 'c')
for x in entities_to_remove:
if x in d:
del d[x]
Learn more about operator here-
https://brainly.com/question/27960749
#SPJ4
A chief Information security Officer (CISO) is evaluating the dangers involved in deploying a new ERP system for the company. The CISO categorizes the system, selects the controls that apply to the system, and then assesses the success of the controls before authoring the system. Which of the following is the CISO using to evaluate the environment for this new ERP systems?
The Diamond Model of intrusion analysis
CIS Critical security controls
NIST risk management framework
ISO 27002
The CISO is using ISO 27002 to evaluate the environment for this new ERP system. which is the correct answer would be an option (D).
What is the ISO?ISO is an abbreviation that stands for the International Organization for Standardization. It is a non-governmental organization responsible for worldwide standard-setting.
A chief information security officer (CISO) is assessing the risks associated with implementing a new ERP system for the organization. Before writing the system, the CISO categorizes the system, picks the controls that apply to the system, and then examines the success of the controls.
The CISO is evaluating the environment for this new ERP system using ISO 27002.
Thus, the CISO is using ISO 27002 to evaluate the environment for this new ERP system.
Hence, the correct answer would be an option (D).
To learn more about the ISO click here:
https://brainly.com/question/14301774
#SPJ1
Determine the maximum uniform loading w, measured in lb/ft, that the cable can support if it is capable of sustaining a maximum tension of 3000 lb before it will break. Prob. 5-10
(image)
w=51.93 ftIb is the maximum uniform
What in building is a uniform load?A load that is uniformly distributed when put into steel storage racks is one whose weight is distributed uniformly over the whole surface of the beams or deck of the rack. A point load is one whose weight is heavily concentrated in one or more locations on the beams or decks of the rack.
The effective force for a uniform load is equal to the total load determined by multiplying the load per unit length by the whole length (or wL). This is also equivalent to the rectangle-shaped space underneath the distributed load diagram in this example. The centroid for the uniform load is located at the distribution's midpoint (L/2).
Given
y= F H 1 ∫∫wdx dx=\frac { w{ x }^{ 2 } }{ 2{ F }_{ H } }dx= 2F Hwx 2
y=( 2F Hw )x 2
x= 2a y=bF H = 8bwa 2
( dxdy )=tan(θ max )= F H w ( 2a )= a4b θ max =
atan(
a4b )θ max =25.64degT max =
cos(θ max )F H = 8bcos(θ max )wa 2 w=
T max8bcos(θ max) w=51.93 ftIb
To learn more about maximum uniform refer to
https://brainly.com/question/14367280
#SPJ4
like all k values, kw is temperature dependent. for instance, at 75oc, the value for kw is 2.00 x 10-13. if the ph of an aqueous solution at 75oc is 5.0, what is the poh?
After that, you change it to pH. However, in pure water, the concentration of hydrogen ions (hydroxonium ions) and hydroxide ions must be equal.
Because Kw rises as temperature rises, the reaction is endothermic. The autoionization of water is more advantageous at higher temperatures because Kw is larger there. This means that at higher temperatures, there is more H3O+ due to the autoionization of water. The output of a gas heater is measured in kW. At 100% efficiency, 3.6 MJ of input results in 1 kW of output. 1 kw is equal to 1000 watts of power. An electric power unit is a kilowatt. A kilowatt uses 1000 Joules per second of energy.
Learn more about efficiency here-
https://brainly.com/question/13154811
#SPJ4
Sometimes cos phi cos lambda in Equation 7.2 is termed the Schmid factor. Determine the magnitude of the Schmid factor for an FCC single crystal oriented with its [120] direction parallel to the loading axis. A single crystal of zinc is oriented for a tensile test such that its slip plane normal makes an angle of 65 degree with the tensile axis. Three possible slip directions make angles of 30 degree, 48 degree, and 78 degree with the same tensile axis. Which of these three slip directions is most favored? If plastic deformation begins at a tensile stress of2.5 MPa (355 psi), determine the critical resolved shear stress for zinc.
Each potential slip system can have its Schmid factor (SF), which is used to evaluate deformation modes in metals, simultaneously determined.
How do you calculate Schmid factor?For these slip systems, the following connection may be used to derive the Schmid factors (m): Where denotes the angle between the loading direction and the slip direction and denotes the angle between the loading direction and the slip plane normal, m is defined as cos cos.Furthermore, each potential slip system can have its Schmid factor (SF), which is used to evaluate deformation modes in metals, simultaneously determined. Using the OIM programme, the grain orientation may be characterised using Euler angles .In particular, it is demonstrated that non-Schmid effects tend to accelerate the development of localised necking in polycrystalline aggregates and that they only marginally affect the localization band's direction.Find the attachment answer
Learn more about Schmid factor refer to :
https://brainly.com/question/15705965
#SPJ4
here is no energy stored in the circuit in Fig. P6.410 at the time the switch is opened. a. Derive the differential equation that governs the behavior of i2 if L1 = 5H, L2 = 0.2 H, M = 0.5 H, and R. = 10 12. Figure P6.41 •7 M It = 0 L3 EL2 iz) ŽR. } b. Show that when ig = e-10t – 10 A, t > 0, the differential equation derived in (a) is satisfied when i2 = 625e –10t – 250e – 500 mA, t > 0. c. Find the expression for the voltage vi across the current source. d. What is the initial value of vi? Does this make sense in terms of known circuit behavior?
The initial value of V1 is consistent with known circuit behavior.
What is circuit?Electrons in an electronic circuit leave the power source, move along conductors, pass through a load to do work, and then return to the power source. Because of the electrons' round direction of travel, this system is known as a circuit. Ohm's Law explains the connection between electrical flow and load. The electrons in a circuit move from the power supply's negative side to its positive side.The vast majority of contemporary electronic gadgets make use of printed circuit boards with circuit traces serving as the conductors. All connections and other parts required for the circuit to complete the required task will be present on the circuit boards as well.T o learn more about circuit, refer to
https://brainly.com/question/24707814
#SPJ4
a state's department of transportation is considering whether to buy or lease an rfid tracking system
A state's department of transportation is considering whether to buy or lease an rfid tracking system.
Net Present Worth (NPW) for Buy - Lease
= -$1500 + $3500 × (P/A, i, 4) + $1500 × (P/F, i ,5)
= 0
What is department of transportation?In Canada[citation needed] or the United States, a government agency devoted to transportation is most frequently referred to as the department of transportation (DOT).
The biggest is a federal agency called the United States Department of Transportation, which regulates interstate travel. All of the states in the United States, the provinces of Canada, and numerous local agencies also have similar organizations and employ DOT officers to enforce the law in their respective regions.
According to the DOT's mission statement, their objective is to create an "efficient and modern transportation system" in order to "improve the quality of life for all Americans."
Learn more about transportation
https://brainly.com/question/27667264
#SPJ4
protons of energy 6.0 mev are incident on a silver foil of thickness 3.3 10-6 m. what fraction of the incident protons is scattered at the following angles?
A proton has a mass of mc2 = 938 MeV. The proton can have a maximum momentum of Pc = 448.5 MeV.
The Coulomb interaction, which represents the elastic scattering of charged particles, is the foundation of the Rutherford scattering model. According to this hypothesis, the alpha particle, when it gets sufficiently close to the nucleus, is strongly repulsed at large angles.
If the difference is greater than 10°, that works out to 4.41 times standing -3. I'm really sorry; I've made a mistake here. It should be 3.37 times and -5 for this uh 90. More than five degrees can also be requested. We'll just repeat the process this time by changing the angle around this, which comes out to be 1.77. B measures 155 cm at this angle, and the fraction of scatters by about five degrees. Apparently, it's 1.77 times 10 to the -2. You asked us to calculate the events between, say, five and ten but less than. The main distinction between five and ten is that.
To know more about proton click here:
https://brainly.com/question/23748506
#SPJ4
based on information in these tables (excluding sandy in 2012, which was not hurricane strength when it came onshore information and excluding information in the addenda), which of the following statements is false?
Through 2013, most of the hurricanes that caused more than 100 deaths in the USA were category 5 hurricanes
What was the strongest hurricane ever recorded in history?Hurricane Patricia, which made history on Friday, October 23, 2015, with winds as powerful as 345 km/h (in terms of wind speed).Just south of Mexico, Patricia began as a disturbance near the Gulf of Tehuantepec. The system was designated as a tropical depression on October 20. The storm began to grow slowly, but quickly intensified late on October 21.Through October 23, the hurricane gained more strength and became a Goliath storm with a low air pressure of 872 millibars. Not just in the eastern Pacific Ocean, it is the second-most intense storm (in terms of pressure) ever recorded.To learn more about hurricane, refer to
https://brainly.com/question/2835662
#SPJ4
compute the bulk volume of 1400 lb of oven-dry aggregate particles having a bulk dry specific gravity of 2.810.
The bulk volume of 1400 lb of oven-dry aggregate particles having a bulk dry specific gravity of 2.810 is 498.22 ml.
What is bulk dry specific gravity?Bulk Specific Gravity, also referred to as Bulk Dry Specific Gravity, is the ratio of the weight in air of a unit volume of aggregate at a given temperature to the weight in air of a volume of distilled water that is the same size but free of gas at that same temperature.
The bulk specific gravity is the ratio of the weight of a given volume of aggregate to the weight of a similar volume of water, taking into account both permeable and impermeable voids in the particles. Because it is used to determine how much asphalt will fill voids in mineral aggregate, bulk specific gravity of aggregate is crucial information for designing hot mix asphalt.
We know the bulk dry specific gravity formula as Gsb = [tex]\frac{Dry \ weight}{Bulk \ Volume}[/tex]
And, Bulk Volume = solid volume + water permeable pore volume
But as the particles are oven-dry aggregate there is no moisture
The volume is constant
Bulk volume = [tex]\frac{Dry\ Weight}{Gsb}[/tex]
= [tex]\frac{1400}{2.810}[/tex]
= 498.22
Learn more about bulk specific gravity
https://brainly.com/question/14804956
#SPJ4
A machine has an efficiency of 15%. If the energy input is 300 joules, how much useful energy is generated?(1 point).
With an energy input of 300 J and an efficiency of 15%, the machine produces 45 J of useable energy.
What is energy?Energy is characterized as a quantitative characteristic that is transmitted to a person or a physical system and can be observed in the manner in which labor is accomplished as well as in the generation of heat and light. The sun is one of the most significant energy sources.
The machine's useful energy output, or work output, can be calculated as follows:
Efficiency = work out / work in x 100
0.15 = work out / 300
Multiply by cross
Production = 0.15 x 300
Production: 45 J
Thus, with an energy input of 300 J and an efficiency of 15%, the machine produces 45 J of useable energy.
To learn more about energy, refer to the link below:
https://brainly.com/question/1932868
#SPJ1
