The approximate bond angle for a molecule with a tetrahedral shape is 109.5° (option A).
What is bond angle?Bond angle is defined as the angle between the two bonds i.e. angle between two orbitals containing bonding electron pairs around the central atom in a complex molecule or ion.
Bond angle is measured in degrees (°) and is calculated using spectroscopic method.
The tetrahedral shape is formed by the sp³ hybrid orbitals. The angle between any two sp³ hybrid orbitals is 109.5°.
Learn more about bond angle at: https://brainly.com/question/13751116
#SPJ1
what is oxygen gas formula?
The formula for oxygen gas is O₂.
Oxygen gas is a diatomic molecule consisting of two oxygen atoms bonded together by a covalent bond. It is a colorless, odorless, and tasteless gas that makes up about 21% of the Earth's atmosphere by volume. Oxygen gas is essential for the survival of most living organisms, as it is used in cellular respiration to produce energy.
It is also used in a variety of industrial processes, such as steel production and chemical synthesis. The chemical formula O2 is used to represent one molecule of oxygen gas, which contains a total of 16 protons and 16 electrons.
To know more about the oxygen gas, here
brainly.com/question/29728291
#SPJ4
Select all of the following that are products in the overall equation for aerobic respiration. (select more than one)
ATP (adenosine triphosphate)
NaOH (natrium hidroxide)
CO2 (carbon dioxide)
CO (carbon monoxide)
The products in the overall equation for aerobic respiration are ATP (adenosine triphosphate) and CO2 (carbon dioxide).
What is aerobic respiration?
Aerobic respiration is a metabolic process that uses oxygen to convert glucose into energy. During aerobic respiration, glucose (sugar) is broken down in the presence of oxygen (O2) to produce energy in the form of ATP (adenosine triphosphate). This process also produces carbon dioxide (CO2) and water (H2O). The energy produced by aerobic respiration is used to fuel cellular processes such as protein synthesis and muscle contractions. Aerobic respiration is the main form of respiration in humans and other animals.
The overall equation for aerobic respiration is C6H12O6 + 6O2 yields 6CO2 + 6H2O + energy (as ATP). ATP (adenosine triphosphate) and CO2 (carbon dioxide) are products in the overall equation for aerobic respiration. NaOH (natrium hydroxide) and CO (carbon monoxide) are not products in the equation.
Therefore, ATP (adenosine triphosphate) and CO2 (carbon dioxide) are the answers.
To learn more about aerobic respiration the link
https://brainly.com/question/12605249
#SPJ1
what is na2co3 molar mass?
The molar mass of Na₂CO₃ (sodium carbonate) is 105.99 g/mol.
Molar mass is the mass of one mole of a substance, expressed in grams per mole. In the case of Na₂CO₃, the molar mass is calculated by adding the atomic masses of the constituent elements (two sodium atoms, one carbon atom, and three oxygen atoms) in the compound.
The atomic masses can be found in the periodic table of elements and are expressed in atomic mass units (amu). The molar mass of Na₂CO₃,
2 x (sodium atomic mass) + 1 x (carbon atomic mass) + 3 x (oxygen atomic mass) = 2 x 22.99 g/mol + 1 x 12.01 g/mol + 3 x 16.00 g/mol = 105.99 g/mol
To know more about the molar mass, here
brainly.com/question/22997914
#SPJ4
What’s the answer?? Please and thank you
Answer:
K was the most reactive metal.
Explanation:
K was reactive, 3/4 of the time, while the others were less. So therefore K was most reactive.
Answer:
k
Explanation:
In a _____two or more substances combine to form a new single substance.
a. Decomposition
b. Combination
c. Displacement
d. Double displacement
Many crustal features can be seen as having resulted from _______________________________________________. Where two plates come together at a _______________________________________ boundary, they collide and form such features as mountains. When two plates move away from each other the result is a ____________________________________ boundary, and they form such features as mid-ocean ridges. A _____________________________________ boundary forms when two plates slide past each other. If the pressure between two plates builds high enough, the plates may move rapidly causing ______________________________ and the occurrence of _____________________________________ activity. Features such as __________________________ and __________________________ can be seen from space and lend support to the plate tectonics theory.
Plate tectonic processes are responsible for various crustal features, such as mountains at convergent boundaries, mid-ocean ridges at divergent boundaries, earthquakes and volcanic activity at transform boundaries, and visible features like rift valleys and subduction zones.
What are the three types of plate boundaries?The three types of plate boundaries are convergent, divergent, and transform boundaries.
Many crustal features can be seen as having resulted from plate tectonics. Where two plates come together at a convergent boundary, they collide and form such features as mountains. When two plates move away from each other the result is a divergent boundary, and they form such features as mid-ocean ridges. A transform boundary forms when two plates slide past each other. If the pressure between two plates builds high enough, the plates may move rapidly causing earthquakes and the occurrence of volcanic activity. Features such as ridges and trenches can be seen from space and lend support to the plate tectonics theory.
Learn more about earthquakes here:
https://brainly.com/question/29500066
#SPJ1
What will be the volume of water vapor produced when 8 grams of h2 reacts at stp?
89.6L will be the volume of water vapor produced when 8 grams of H[tex]_2[/tex] reacts at STP.
What is volume?A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, as well as several imperial or US-standard units. Volume and length (cubed) have a symbiotic relationship.
The volume of such a container is often thought of as its capacity, not as the amount of space it takes up. In other words, the volume of fluid (liquid or gas) that the container may hold.
mole of hydrogen gas = 8/ 2= 4 moles
one mole of any gas occupy 22.4L of volume
volume of hydrogen gas = 4 × 22.4=89.6L
Therefore, 89.6L will be the volume of water vapor produced when 8 grams of H[tex]_2[/tex] reacts at STP.
To know more about volume, here:
https://brainly.com/question/23477586
#SPJ1
how much distilled water must be added to 0.5 ml of 0.1 m fecl3 to make it 0.001 m fecl3 (in units of ml)?
Therefore, 50 mL of distilled water must be added to 0.5 mL of 0.1 M FeCl₃ to make it 0.001 M FeCl₃.
What is distilled water?Distilled water is a type of purified water that has gone through a process of distillation, which involves boiling water and then condensing the steam into a separate container. This process removes impurities and minerals from the water, resulting in a very pure form of water. Distilled water is often used in laboratory experiments and medical procedures where purity is important. It can also be used in household appliances, such as irons and humidifiers, to prevent mineral buildup that can lead to damage or decreased performance.
Here,
To calculate the amount of distilled water that must be added to 0.5 mL of 0.1 M FeCl₃ to make it 0.001 M FeCl₃, we can use the dilution formula:
M1 x V1 = M2 x V2
where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.
We can rearrange this formula to solve for V2, which represents the volume of water that must be added:
V2 = (M1 x V1) / M2
Plugging in the values we have:
M1 = 0.1 M (the initial concentration)
V1 = 0.5 mL (the initial volume)
M2 = 0.001 M (the final concentration)
V2 = unknown (the volume of water to be added)
V2 = (0.1 M x 0.5 mL) / 0.001 M
V2 = 50 mL
To know more about distilled water,
https://brainly.com/question/23802525
#SPJ1
how are the hydrocarbons in petroleum separated into fractions
The hydrocarbons in the petroleum that are separated into the fractions is by the fractional distillation method.
The Petroleum will be separated into the fractions through the process called as the fractional distillation. The Petroleum is heated in the distillation tower, and making the hydrocarbons will vaporize. The highest temperature is present at the bottom in the distillation tower, and the lowest temperature is present at the top of the distillation tower.
Therefore at the different heights in the distillation tower, the different temperatures will be present. The vaporized hydrocarbons will rise through the tower and will condense as the temperature will be decreases.
To learn more about hydrocarbons here
https://brainly.com/question/29361672
#SPJ4
when particularly dangerous materials, including chemical, biological, radiological, nuclear, or explosive (cbrne) materials are used as weapons, they are referred to as:
When particularly dangerous materials including chemical, biological, radiological, nuclear or explosive materials are used as weapons, they are referred as weapons of mass destruction.
A weapon of mass destruction is defined as a nuclear, radiological, chemical, biological or other device that is intended to harm a large number of people. It is a chemical, biological, radiological, nuclear weapon that can kill and bring significant harm to numerous individuals or cause great damage to artificial structures, natural structures or the biosphere. Russia's Tsar bomb is the world's most powerful nuclear weapon of mass destruction. This bomb exploded about 4 km above the ground and reportedly produced a mushroom cloud 60 km high.
To learn more about Weapons of mass destruction please visit:
https://brainly.com/question/12946564
#SPJ4
what is percent recovery formula
Percent recovery is a formula used to determine the amount of a substance that has been successfully isolated. The percent recovery formula is: Percent Recovery = (Amount Recovered/Initial Amount) x 100.
This calculation is commonly used in chemistry and other scientific fields to determine the efficiency of a particular process, such as purification, separation, or extraction.
The percent recovery formula is:
Percent Recovery = (Amount Recovered / Initial Amount) x 100
In this formula, "Amount Recovered" refers to the total amount of the target substance that was obtained through the process, while "Initial Amount" refers to the original amount of the substance that was present in the starting material. The resulting value is then multiplied by 100 to express the percent recovery as a percentage.
For example, suppose you are attempting to extract a particular compound from a sample of 100 grams of a mixture. After the extraction process, you obtain 75 grams of the compound. Using the percent recovery formula, you can calculate the efficiency of the extraction process as follows:
Percent Recovery = (75 g / 100 g) x 100
Percent Recovery = 75%
This means that 75% of the target compound was successfully extracted from the original sample, while the remaining 25% was lost or remained in the mixture.
The percent recovery formula is a useful tool for assessing the effectiveness of various chemical processes, and can help scientists optimize their procedures to achieve higher yields and greater efficiency. However, it is important to note that the percent recovery calculation may be affected by various factors, such as impurities, losses during processing, or incomplete reactions. As such, it is important to carefully control and monitor all aspects of the process to ensure accurate and reliable results.
To know more about isolated: https://brainly.com/question/7741418
#SPJ4
Why is the mantle of the earth described as semi-solid?
A. the mantle is solid toward the crust and liquid toward the outer core
B. the mantle is so hot that it allows the rocky material to flow gradually
C. the mantle is composed of some solid pockets and some liquid pockets
D. the mantel is liquid during warmer months and solid during colder months.
Please explain why your answer is correct.
Apart from the outer core, the magma is solid and liquid, respectively. The heat and pressure of the asthenosphere cause rocks to weaken & partially melt in crust, forming semi-molten.
What is the crust like?The shifting geology of a Earth's crust is explained by plate tectonics. The mantle, which sits below the crust, is largely made up of hard minerals and rocks, though it does occasionally contain semi-solid magma. The Earth's interior is made up of a hot, solid metal core.
What is a magma like?Magma, which is found beneath the surface of the Earth, is a very hot semi-liquid and liquid rock. Its inner core, outer core, mantle, & crust make up Earth's stratified structure. The majority of a planet's mantle is composed of magma.
To know more about crust visit :
brainly.com/question/26953416
#SPJ4
Which of the following actions would affect the secondary, but not primary, structure of a protein?A. Break the ionic bonds between amino acidsB. Change the sequence of amino acidsC. Break the hydrogen bonds between amino acidsD. Disrupt the interactions between two different polypeptide chains
Break the hydrogen bonds between the amino acids would affect the secondary, but not primary, structure of a protein. Option C is correct.
The secondary structure of a protein is determined by the regular repeating patterns of hydrogen bonds between the carbonyl group of one amino acid residue and the amine group of another amino acid residue.
Disrupting the hydrogen bonds between amino acids would affect the secondary structure of the protein, as it would cause the regular repeating patterns to be lost and potentially result in a loss of α-helices, β-sheets, or other regular structures.
However, breaking ionic bonds between amino acids, changing the sequence of amino acids, or disrupting interactions between different polypeptide chains would affect the primary or tertiary structure of the protein, respectively, and not the secondary structure.
Hence, C. Break the hydrogen bonds between amino acids is the correct option.
To know more about hydrogen bonds here
https://brainly.com/question/10904296
#SPJ4
colligative properties depend only on solute concentration; the identity of the solute is not important. true/false
False. This statement is generally true for ideal solutions, which are solutions that follow Raoult's law.
According to Raoult's law, the vapor pressure of a solution is directly proportional to the mole fraction of the solvent in the solution. Colligative properties, such as boiling point elevation, freezing point depression, and osmotic pressure, are all related to changes in the vapor pressure of a solution. Since Raoult's law assumes that the solute molecules do not interact with the solvent or with each other, the identity of the solute does not affect the vapor pressure or the colligative properties of the solution. However, real solutions may deviate from Raoult's law due to interactions between the solute and solvent molecules, and in those cases, the identity of the solute can affect the colligative properties.
Learn more about colligative properties here: brainly.com/question/30634202
#SPJ4
for questions 3 and 4, consider the following reaction:2 NO2 (g) → N2O4 (g)The rate law for the reaction is as follows:rate = k [NO2]2 where k = 0.0195 M–1·s–1 at 375 °CFor a reaction that starts with 2.2 moles of NO2 gas in a 0.40 L container, what is the concentration of N2O_4 in the container after one half-life of the reaction? Give your answer in units of mol/L with two significant figures.If the reaction starts with NO_2 at a concentration of 2.0 M, what will be the concentration after 60 seconds? Choose the closest answer.A 0.50 MB 0.60 MC 0.70 MD 0.80 ME 0.90 M
Answer: B 0.6M
Explanation:
Karmina inflated a balloon at sea level, where the atmospheric pressure was 101. 3 kilopascals. The volume of the balloon was 2. 15 liters. She then carried the balloon with her to the top of a mountain, where the atmospheric pressure was 83. 1 kilopascals. If the temperature was constant and no air leaked out of the balloon, what was the balloon’s volume at the top of the mountain?.
The volume of the balloon at the top of the mountain can be calculated using Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at a constant temperature.
The formula for Boyle's Law is P1V1 = P2V2, where P1 is the initial pressure, V1 is the initial volume, P2 is the final pressure, and V2 is the final volume.
We are given the initial pressure (P1) as 101.3 kilopascals, the initial volume (V1) as 2.15 litres, and the final pressure (P2) as 83.1 kilopascals. We need to find the final volume (V2).
Plugging the given values into the formula, we get:
101.3 kPa × 2.15 L = 83.1 kPa × V2
Rearranging the equation to solve for V2, we get:
V2 = (101.3 kPa × 2.15 L) / 83.1 kPa
V2 = 217.795 L / 83.1 kPa
V2 = 2.62 L
Therefore, the volume of the balloon at the top of the mountain is 2.62 litres.
You can learn more about volume at: brainly.com/question/13338592
#SPJ11
what is the experimental group in the alka-seltzer experiment
The Alka-Seltzer experiment's experimental group is the group of volunteers who are given Alka-Seltzer pills to ingest.
The experiment's goal is to test the hypothesis that Alka-Seltzer pills will shorten the time it takes for stomach discomfort to go away. The control group consists of volunteers who were given a placebo, or a false drug, instead of the Alka-Seltzer pills.
The experimental group is critical to the experiment because it allows for a comparison of the outcomes seen in subjects given Alka-Seltzer pills vs those given a placebo. The hypothesis could not be tested and the results could not be appropriately understood in the absence of an experimental group.
Learn more about the Alka-seltzer experiment at
https://brainly.com/question/29106242
#SPJ4
a process that releases heat, such as freezing or condensation is called?endothermicnonthermiclow thermic
exothermic
Exothermic. A process that releases heat, such as freezing or condensation, is called exothermic.
Exothermic refers to a process that gives off heat, like freezing or condensation. In such a process, energy is released to the surroundings in the form of heat. This can occur during phase changes, such as when a gas condenses into a liquid or when a liquid freezes into a solid. Chemical reactions can also be exothermic if the products of the reaction have less energy than the reactants. Exothermic reactions are often accompanied by an increase in temperature or the production of light. Examples of exothermic reactions include combustion, neutralization, and some types of oxidation.
Learn more about Exothermic process here: brainly.com/question/29555731
#SPJ4
Give a brief explanation of the calibration process.
Calibration is the process of adjusting or checking the accuracy of a measuring instrument or tool by comparing its measurement with a known standard or reference.
The calibration procedure consists of several steps, including:
Choosing a standard or reference: A known standard or reference that is accurate and traceable to national or international standards is chosen.Instrument preparation: The instrument is prepared for calibration by cleaning, adjusting, and stabilising it to ensure it is in good working order.The instrument is compared to the standard or reference, and any variances or mistakes are documented.Adjusting the instrument: If the instrument is out of alignment with the standard, it is adjusted.Calibration verification: The instrument is retested to ensure that it is now within the allowed range of error and meets the accuracy standards.For such more question on Calibration:
https://brainly.com/question/1895684
#SPJ4
The industrial production of nitrogen-containing fertilizer is currently limited byA) its high energy expense.B) the inability to insert nitrogenase genes into plants.C) the lack of nitrogenase for the industrial process.D) the limited supply of N2 gas.E) the need to exclude free oxygen in the process.
The industrial production of the nitrogen-containing fertilizer is currently limited by the limited supply of a N₂ gas. Option D is correct.
Nitrogen gas (N₂) is the most abundant component of air, but it is relatively unreactive and cannot be easily converted into biologically useful forms. The industrial production of nitrogen-containing fertilizers such as ammonia (NH₃) and urea (CO(NH₂)₂) requires the conversion of atmospheric nitrogen to a reactive form, which is typically accomplished using the Haber-Bosch process.
However, this process requires large amounts of energy and relies on nonrenewable resources, making it environmentally and economically unsustainable. Therefore, finding alternative, more sustainable methods for nitrogen fixation is an important goal for agricultural and industrial applications.
Hence, D. the limited supply of N₂ gas is the correct option.
To know more about Nitrogen gas here
https://brainly.com/question/11426882
#SPJ4
what is aspirin drug class
Aspirin belongs to the drug class of nonsteroidal anti-inflammatory drugs (NSAIDs). NSAIDs are a class of drugs that work by inhibiting the production of prostaglandins, which are responsible for pain, and fever.
Aspirin is specifically classified as an acetylsalicylic acid, which is a type of NSAID that is also used to reduce fever and prevent blood clots. In addition to its anti-inflammatory and analgesic properties, aspirin is also used in the prevention of heart attacks, strokes, and other cardiovascular events. Aspirin is one of the most widely used drugs in the world and has been in use for more than a century. Moreover, aspirin is offered in combinations with antacids, painkillers, and cough and cold remedies. Only aspirin-related information is covered in this monograph. Read the directions on the container or prescription label if you are taking a combination product, or ask your doctor or pharmacist for more information.
Learn more about Aspirin here:
https://brainly.com/question/29133232
#SPJ4
where Kf is the freezing point depression constant and m is the molality of the solution. Which of the statements explains why molality is used instead of molarity in this equation? A. Molality does not appear in many equations, so it is used here to distinguish this equation from other similar ones. B. As the temperature of a solution changes, its volume will also change, which will affect its molarity but not its molality. C. In solutions, moles are not directly related to grams and the freezing point of a solution is dependent solely on the number of grams of solute. D. The equation was originally published with m as a typo, rather than M, but the values are close enough that the equation is still valid.
The statement that explains why molality is used rather of molarity in the freezing point depression equation is B. As the temperature of a result changes, its volume will also change, which will affect its molarity but not its molality.
Molality is defined as the number of intelligencers of solute per kilogram of detergent, whereas molarity is defined as the number of intelligencers of solute per liter of result. Since the volume of a result can change with temperature, the attention of a result measured in molarity can be affected by changes in volume. This can lead to inaccuracies in computations involving changes in temperature, similar as in the freezing point depression equation. In discrepancy, molality is a measure of attention that isn't affected by changes in volume because it's grounded on the mass of the detergent, which is assumed to remain constant indeed as the temperature changes. thus, molality is the more applicable attention unit to use in the freezing point depression equation, which is dependent on the attention of the solute and not on the volume of the result.
learn more about freezing point here:
https://brainly.com/question/3121416
#SPJ4
which element is a main group element with an odd atomic number? a) titanium (ti) b) cobalt (co) c) krypton (kr) d) iodine (i)
Iodine is the element which is a main group element with an odd atomic number. Therefore, the correct option is option D.
What is main group element?The main group of elements in chemistry as well as atomic physics are those whose lightest members are depicted by helium, alkaline earth metals, beryllium, boron, dioxide, nitrogen, oxygen, as well as fluorine as listed inside the the element's periodic table. This group of elements is also referred to as the representative elements.
Except for hydrogen, which is occasionally excluded, the elements in group 1 and 2 (s-block) plus groups 13 to 18 make up the major group (p-block). Iodine is the element which is a main group element with an odd atomic number.
Therefore, the correct option is option D.
To learn more about main group element, here:
https://brainly.com/question/3903501
#SPJ1
what type of plot can be used to determine λmax of a solution?
A. Absorbance vs. volume
B. Absorbance vs. wavelength
C. Absorbance vs. concentration
D. Absorbance vs. transmittance
A plot of absorbance vs. wavelength can be used to estimate a solution's maximum concentration.
How would you choose the analysis's wavelength?Recordings of the absorbance are made between the wavelengths of 350 and 650 nm, often at spacing of 25 nm. You may graph the data to see where the highest absorbance is, or you can look at the pairs of data to work out the wavelength.
What the slope says How about a plot based on Beer's Law?Beer's law is an equation for a straight line that has the general type of y = mx + b, where m is the slope and l is the angle of the slope. In this instance, determine c, using the absorbance discovered for your unknown together with the slopes of your best-fit line.
To know more about concentration visit :
https://brainly.com/question/10725862
#SPJ1
give the atomic size periodic table!
The size of an element's atoms is referred to as its atomic size. The distance between the nucleus and the electrons' outermost shell is used to measure it. Moving down a group tends to increase atomic size while moving across a period tends to decrease it.
Because each succeeding element has an extra electron shell, the atomic size of elements tends to rise down a group. The electrons are subsequently further from the nucleus, which causes an increase in atom size. The amount of protons in the nucleus rises over time, attracting the electrons more strongly and shrinking the atom, which causes it to shrink from left to right over time. Due to things like electron-electron attraction and the shielding effect of inner electrons, there are some outliers to this pattern. For instance, partially full d orbitals may cause the atomic scale of transition metals to be lower than anticipated.
learn more about Atomic size here:
brainly.com/question/1127028
#SPJ4
a scientist mixes 0.02 g of a strong base in 83 ml of water and obtains a ph of 12. he then realizes that he forgot to label the container and forgot what base he added. what is the most likely the identity of this base?
a. LiOH
b. NaOH
c. RbOH
d. KOH
The calculated pKb value of 4.22 is closest to the pKb value of LiOH, so it is likely that the strong base added to the solution is LiOH. The most likely identity of the base added to the solution is LiOH.
To determine the identity of the strong base added to the solution, we can use the pH value and the amount of the base added.
First, we need to calculate the concentration of the strong base in the solution. We can do this by converting the mass of the base (0.02 g) to moles, and then dividing by volume of the solution (83 mL or 0.083 L):
moles of base = (0.02 g) / (molar mass of base)
molar mass of NaOH = 22.99 + 16.00 + 1.01 = 40.00 g/mol
moles of NaOH = (0.02 g) / (40.00 g/mol) = 0.0005 mol
concentration of base = moles of base / volume of solution
concentration of base = 0.0005 mol / 0.083 L = 0.006 M
Next, we can use the fact that pH = 14 - pOH to calculate the pOH of the solution:
pH = 12
pOH = 14 - pH = 14 - 12 = 2
Now we can use the pOH and concentration of the base to calculate the pKb of the base:
pKb = pOH + log([H₂O]/[base])
pKb = 2 + log(1/[0.006])
pKb = 2 + 2.22 = 4.22
Finally, we can compare the pKb value of the base to the pKb values of known strong bases to determine the most likely identity of the base. The pKb values of some common strong bases are:
LiOH: pKb = 0.19
NaOH: pKb = 0.20
KOH: pKb = 0.17
CsOH: pKb = 0.08
Learn more about bases here: brainly.com/question/27915098
#SPJ4
Stoichiometry balancing equations
The mole ratio of the nitric acid to water is 8:4
How do we balance reaction equations?To balance a chemical reaction equation, you need to make sure that the number of atoms of each element is the same on both the reactant and product side.
We can see that in the question that the reaction equation can be said to be balanced as we can see in the image that have been attached and we are to find the mole ratio of the nitric acid having a mole coefficient of 8 and the water with a mole coefficient of 4.
Learn more about mole ratio:https://brainly.com/question/15288923
#SPJ1
What is the formal charge of an oxygen atom that forms three bonds and has one lone pair?
A. -2
B. -1
C. 0
D. +1
E. +2
Answer: +1
Explanation: i took the test
why is the bohr atom described as a planetary model?
According to the Bohr's model, known as a planetary model, the electrons orbit the atom's nucleus in determined, permissible pathways. The electron's energy is constant when it is in one of these orbits.
What is Bohr's model?In Bohr's model theory, there is a tiny, positively charged nucleus that is surrounded by negatively charged electrons that orbit the nucleus. According to Bohr, an electron that is farther from the nucleus has more energy than an electron that is closer to the nucleus does.
By explaining that electrons move in fixed orbitals (shells) and not anywhere in between, Bohr theory amended the atomic structure model. He also showed that each orbit (shell) has a fixed energy. Bohr refined Rutherford's model of the atom's nucleus to include electrons and their varying energy levels.
Bohr's hypothesis is applicable to entities that are similar to hydrogen but only have one electron, such Li2+. Atoms similar to hydrogen are amenable to Bohr's hypothesis (single electron system). Only one electron makes up Li2+ and the H atom. He and He2+ each have two and zero electrons.
To know more about Bohr's model, check out:
https://brainly.com/question/14153769
#SPJ1
_____ fatty acids consist entirely of carbon-carbon single bonds.
Saturated fatty acids
