If a sample of a compound has a mass of 16.7 g and it contains 12.7 g of iodine and 4 g of oxygen. What is its empirical

The numbers in scientific notation can be converted to ordinary notation as follows:
a. [tex]7.050 x 10^3 g[/tex]; In ordinary notation, this is 7,050 g.
b. [tex]4.000 05 x 10^7 mg[/tex], In ordinary notation, this is 40,000,500 mg.
c. [tex]2.350 0 x 10^4 ml[/tex], In ordinary notation, this is 23,500 ml.


To convert a number from scientific notation to ordinary notation, you need to move the decimal point to the right or left depending on the exponent of 10.

a. The exponent is 3, so you move the decimal point 3 places to the right, resulting in 7,050 g.

b. The exponent is 7, so you move the decimal point 7 places to the right, resulting in 40,000,500 mg.

c. The exponent is 4, so you move the decimal point 4 places to the right, resulting in 23,500 ml.

Learn more about scientific notation here:

https://brainly.com/question/19625319

#SPJ11

The equilibrium concentrations at 1000 K in enclosed vessel are:

[COCl₂] ≈ 0.0531 M

[CO] ≈ 0.4489 M

[Cl₂] ≈ 0.3659 M

To calculate the equilibrium concentrations of each gas at 1000 K, we can use the equilibrium expression and the given initial concentrations. The balanced chemical equation for the reaction is:

CO(g) + Cl₂(g) → COCl₂(g)

The equilibrium constant expression (Kc) for this reaction is given as Kc = [COCl₂] / [CO] [Cl₂], where square brackets denote the concentrations of the respective species.

Given:

[CO] = 0.5020 M

[Cl₂] = 0.4190 M

Kc = 255.0

Let's assume the equilibrium concentrations of COCl₂, CO, and Cl₂ are x, y, and z, respectively. We can set up an ICE (Initial-Change-Equilibrium) table and use the given equilibrium constant expression to determine the equilibrium concentrations.

ICE table:

     CO(g)     +    Cl₂(g)    ⇄   COCl₂(g)

Initial: 0.5020 0.4190 0

Change: -x -z +x

Equilibrium: y z x

Using the equilibrium constant expression, we have:

Kc = [COCl₂] / [CO] [Cl₂]

Substituting the equilibrium concentrations, we get:

255.0 = x / (y × z)

We also know that the initial concentrations of CO and Cl₂ decrease by x and z, respectively, and the equilibrium concentration of COCl₂ increases by x.

Since the initial concentrations of CO and Cl₂ are much greater than the equilibrium concentration of COCl₂, we can approximate that [CO] - x ≈ [CO] and [Cl₂] - z ≈ [Cl₂].

Using this approximation, the equilibrium expression becomes:

255.0 = x / ([CO] × [Cl₂])

Now we can solve for x:

x = 255.0 × ([CO] × [Cl₂])

Substituting the given values:

x = 255.0 × (0.5020 M × 0.4190 M)

x ≈ 0.0531 M

Therefore, the equilibrium concentration of COCl₂ is approximately 0.0531 M.

Since we assumed [CO] - x ≈ [CO], the equilibrium concentration of CO is approximately:

y = [CO] - x = 0.5020 M - 0.0531 M = 0.4489 M

Similarly, since we assumed [Cl₂] - z ≈ [Cl₂], the equilibrium concentration of Cl₂ is approximately:

z = [Cl₂] - x = 0.4190 M - 0.0531 M = 0.3659 M

Hence, the equilibrium concentrations at 1000 K are:

[COCl₂] ≈ 0.0531 M

[CO] ≈ 0.4489 M

[Cl₂] ≈ 0.3659 M

To know more about equilibrium concentrations:

https://brainly.com/question/33648224

#SPJ4

The molar concentration of the solution is approximately 0.875 M.

The molar concentration of a solution is calculated by dividing the moles of solute by the volume of the solution in liters. First, we need to find the number of moles of sugar.

We can do this by dividing the mass of sugar (70.9 g) by its molar mass (342.30 g/mol). This gives us approximately 0.207 moles.

Next, we need to convert the volume of the solution to liters.

Since 1 ml is equal to 0.001 liters, the volume of the solution is 236.5 ml * 0.001 = 0.2365 liters.

Finally, we can calculate the molar concentration by dividing the number of moles of sugar by the volume of the solution in liters.

So, the molar concentration of the solution is 0.207 moles / 0.2365 liters, which is approximately 0.875 M.

Learn more about molar concentration here:

https://brainly.com/question/29429999

#SPJ11

To make a 0.495 m iron(II) iodide solution, you should add 39.0 grams of iron(II) iodide. For a 0.575 m nickel(II) bromide solution, add 148.65 grams of water.

To calculate the grams of iron(II) iodide needed to make a 0.495 m solution, we can use the molality formula:

Molality (m) = moles of solute / mass of solvent in kg

Given that the molality is 0.495 m and the mass of water is 255 grams (0.255 kg), we can rearrange the formula to solve for the moles of iron(II) iodide:

moles of solute = molality * mass of solvent in kg

moles of iron(II) iodide = 0.495 * 0.255 = 0.126225 mol

The molar mass of iron(II) iodide is 309.65 g/mol, so the grams of iron(II) iodide needed can be calculated as:

grams of iron(II) iodide = moles of iron(II) iodide * molar mass of iron(II) iodide

grams of iron(II) iodide = 0.126225 mol * 309.65 g/mol = 39.0 grams

Therefore, you should add 39.0 grams of iron(II) iodide to make a 0.495 m solution.

To calculate the amount of water needed to make a 0.575 m nickel(II) bromide solution, we can use the same molality formula.

Given that the molality is 0.575 m and the mass of nickel(II) bromide is 18.7 grams, we need to solve for the mass of water.

moles of solute = molality * mass of solvent in kg

moles of nickel(II) bromide = 0.575 * (mass of water in kg)

The molar mass of nickel(II) bromide is 218.5 g/mol, so we can calculate the moles of nickel(II) bromide:

moles of nickel(II) bromide = 18.7 g / 218.5 g/mol = 0.085477 mol

Now, rearranging the equation, we can solve for the mass of water:

mass of water in kg = moles of nickel(II) bromide / molality

mass of water in kg = 0.085477 mol / 0.575 mol/kg = 0.14865 kg

Finally, we convert the mass of water to grams:

mass of water = 0.14865 kg * 1000 = 148.65 grams

Therefore, you should add 148.65 grams of water to make a 0.575 m nickel(II) bromide solution.

Learn more about molar mass here

https://brainly.com/question/837939

#SPJ4

Answer:

molecular biology university of California

The correct option is $26785.To calculate the total cost per equivalent unit using the weighted average method, we need to consider the costs incurred in both the beginning work in process and the units added during the period.

First, let's calculate the equivalent units of production for both conversion and materials:

Conversion costs:

Beginning work in process: 400 units × 20% complete = 80 equivalent units

Units added during the period: 2,000 units × 40% complete = 800 equivalent units

Total equivalent units for conversion = 80 + 800 = 880 equivalent units

Material costs:

Beginning work in process: 400 units × 30% complete = 120 equivalent units

Units added during the period: 2,000 units × 50% complete = 1,000 equivalent units

Total equivalent units for materials = 120 + 1,000 = 1,120 equivalent units

Next, let's calculate the total costs incurred:

Conversion costs:

Beginning work in process cost: $14,880

Costs added during the period: $409,200

Total conversion costs = $14,880 + $409,200 = $424,080

Material costs:

Beginning work in process cost: $9,900

Costs added during the period: $180,080

Total material costs = $9,900 + $180,080 = $189,980

Now, we can calculate the total cost per equivalent unit:

Total cost per equivalent unit = (Total conversion costs + Total material costs) / (Total equivalent units for conversion + Total equivalent units for materials)

Total cost per equivalent unit = ($424,080 + $189,980) / (880 + 1,120)

Total cost per equivalent unit ≈ $267.85

Therefore, the correct option is $26785.

To know more about conversion and materials, click here, https://brainly.com/question/1162213

#SPJ11

The 792 milliliters of the glucose solution will be needed to measure out for the experiment.  In conclusion, to make the glucose solution of 0.525 M, 792 milliliters of solution is required.

The molecular weight of glucose is 180.18 g/mol.

The density of 0.525 M glucose solution is 1.032 g/mL.

To find the volume of 0.525 M glucose solution, the molecular weight of glucose and density of 0.525 M glucose solution are used.The molarity of glucose is given by;

Molarity = moles of solute / volume of solution75.0 g glucose is the solute required to make a solution.

The moles of glucose will be calculated from its molecular mass.

Moles of glucose

= Mass of glucose / Molecular weight of glucose

= 75.0 g / 180.18 g/mol

= 0.416 mol

Molarity of glucose solution = 0.525 MVolume of solution needed = Moles of solute / Molarity of solution

= 0.416 mol / 0.525 mol/L

= 0.792 L

The answer should be reported in milliliters. So,0.792 L = 792 mL.

To know more about glucose solution visit:-

https://brainly.com/question/29078667

#SPJ11

Approximately 129.05 grams of HCl are formed from the reaction of 3.56 grams of H₂ with 8.90 grams of Cl₂.

To determine the grams of HCl formed from the reaction of H₂ with Cl₂, we need to calculate the limiting reactant and use the stoichiometry of the balanced chemical equation.

The balanced chemical equation for the reaction between H₂ and Cl₂ to form HCl is:

H₂ + Cl₂ → 2HCl

First, let's calculate the number of moles of H₂ and Cl₂ using their respective masses and molar masses.

Number of moles of H₂ = mass of H₂ / molar mass of H₂

Number of moles of H₂ = 3.56 g / 2.016 g/mol ≈ 1.77 mol

Number of moles of Cl₂ = mass of Cl₂ / molar mass of Cl₂

Number of moles of Cl₂ = 8.90 g / 70.906 g/mol ≈ 0.125 mol

According to the balanced equation, the stoichiometric ratio between H₂ and HCl is 1:2. Therefore, for each mole of H₂, we get 2 moles of HCl.

Since the ratio of H₂ to Cl₂ is 1:1 in the balanced equation, and we have an excess of Cl₂, the limiting reactant is H₂. This means that all of the H₂ will be consumed in the reaction.

Therefore, the number of moles of HCl formed is equal to twice the number of moles of H₂:

Number of moles of HCl = 2 * number of moles of H₂

Number of moles of HCl = 2 * 1.77 mol ≈ 3.54 mol

Finally, let's calculate the mass of HCl formed using the molar mass of HCl:

Mass of HCl = number of moles of HCl * molar mass of HCl

Mass of HCl = 3.54 mol * 36.461 g/mol ≈ 129.05 g

Therefore, approximately 129.05 grams of HCl are formed from the reaction of 3.56 grams of H₂ with 8.90 grams of Cl₂.

Learn more about Stoichiometric Ratio at

brainly.com/question/6907332

#SPJ4

Complete Question:

How many grams of HClHCl are formed from the reaction of 3.56 gg of H₂H₂ with 8.90 gg of Cl₂ Cl₂?

The compound sodium bromide is a strong electrolyte. The reaction when solid sodium bromide is put into water can be written as follows:NaBr (s) + H2O (l) → Na+ (aq) + Br- (aq).

The compound sodium bromide is made up of positively charged sodium ions (Na+) and negatively charged bromide ions (Br-).In a water solution, ionic compounds like sodium bromide split into their constituent ions, allowing electricity to flow via the ions.

Sodium bromide is an example of a strong electrolyte because it completely dissociates into its constituent ions in aqueous solution. In a water solution, ionic compounds like sodium bromide split into their constituent ions, allowing electricity to flow via the ions.

To know more about sodium bromide visit:-

https://brainly.com/question/15409724

#SPJ11

No element in the nitrogen family (Group 15) has a lower atomic number than sodium. Sodium (Na) has an atomic number of 11, while the elements in Group 15 (nitrogen family) have atomic numbers ranging from 15 to 83.

The elements in Group 15 are nitrogen (N), phosphorus (P), arsenic (As), antimony (Sb), bismuth (Bi), and moscovium (Mc). These elements have atomic numbers 7, 15, 33, 51, 83, and 115, respectively.

As per the given condition, we are looking for an element with a lower atomic number than sodium (Z ≤ 11). None of the elements in the nitrogen family have atomic numbers lower than sodium. Therefore, there is no element that matches the description of having a lower atomic number than sodium within the nitrogen family or any element with Z ≤ 92.

Elements with atomic numbers lower than sodium can be found in Groups 1 and 2, known as the alkali metals and alkaline earth metals, respectively. For example, elements such as hydrogen (H), lithium (Li), beryllium (Be), and boron (B) have atomic numbers lower than sodium.

For more such question on nitrogen family visit:

https://brainly.com/question/1304764

#SPJ8

The correct answer is option e. OA > MA > LA.Acidic strength is the ability of an acid to donate a proton (H+) ion. A strong acid will easily give up an H+ ion while a weak acid will not. pKa is the measure of acidity. The lower the pKa value, the stronger the acid.

Therefore, an acid with a pKa of 1 is stronger than an acid with a pKa of 5.

Given that their pKa values are LA = 3.88, OA = 1.23, and MA = 3.40.

The list showing the acids in order of decreasing acid strength is as follows:OA > LA > MA

The pKa values given suggest that Oxalic acid (OA) is the strongest acid and Malic acid (MA) is the weakest acid. OA has the lowest pKa value of 1.23, which means that it has the strongest acidic strength. LA has a pKa of 3.88, which makes it a weaker acid compared to OA.

MA has a pKa of 3.40, which is slightly less acidic than LA.

Therefore, the order of decreasing acid strength is:

OA > LA > MA.

In conclusion, the correct answer is option e. OA > MA > LA.

To know more about Acidic strength visit:

https://brainly.com/question/32792692

#SPJ11

Finally, hold down the plunger and blow out the last remaining water droplets in the pipette using the bulb.This process may be repeated several times to ensure that you obtain a sample with high accuracy. Ensure that you keep your workspace clean and sterile while carrying out this procedure. Always use gloves and a lab coat while working in a lab or handling chemicals.

To aspirate 3mL distilled water using a 5 mL “to blow out pipette,” you need to follow the procedure below:

First, make sure you have all the necessary equipment to begin the procedure, including a pipette and distilled water.

Follow these steps to aspirate 3 mL distilled water:

Hold the pipette vertically, ensuring that the tip is submerged in the distilled water bottle;

Ensure that you have an adequate amount of water in the pipette before removing it from the bottle.

In this scenario, you will fill the pipette with water using the squeeze bulb;

Release the bulb gently to let the distilled water enter the pipette and fill it to the mark;

Remove the pipette from the water bottle while keeping it vertically;

Gently tap the pipette to ensure that there are no air bubbles in the pipette;

Slowly and steadily release the water droplets from the pipette tip by lightly pressing the plunger down.

You can do this by touching the pipette to the inner surface of the vessel you are depositing the water into;

to know more about sterilization visit:

https://brainly.com/question/33532853

#SPJ11

The molality of the solution is approximately 1.55 m. Therefore, the correct answer is A) 1.55 m.

To find the molality (m) of the solution, we need to determine the number of moles of the solute (propyl alcohol) and the mass of the solvent (water).

Given:

Mass of propyl alcohol (solute) = 35.0 g

Mass of water (solvent) = 200 g

Step 1: Convert the mass of propyl alcohol to moles.

First, we need to calculate the molar mass of propyl alcohol (C3H7OH):

C = 12.01 g/mol, H = 1.008 g/mol, O = 16.00 g/mol

Molar mass of propyl alcohol = (3 * 12.01 g/mol) + (8 * 1.008 g/mol) + 16.00 g/mol = 60.12 g/mol

Now, we can calculate the number of moles of propyl alcohol:

Number of moles of propyl alcohol = Mass of propyl alcohol / Molar mass of propyl alcohol

= 35.0 g / 60.12 g/mol

Step 2: Calculate the molality.

Molality (m) is defined as the number of moles of solute per kilogram of solvent.

Mass of water (in kg) = Mass of water (g) / 1000

Now we can calculate the molality:

Molality (m) = Number of moles of propyl alcohol / Mass of water (in kg)

= (35.0 g / 60.12 g/mol) / (200 g / 1000)

Simplifying the expression, we get:

Molality (m) = (35.0 g * 1000) / (60.12 g/mol * 200 g)

= 1.55 m (rounded to two decimal places)

Option A

For more such questsion on molality  visit:

https://brainly.com/question/13200956

#SPJ8

The mass percent of realgar in the mixture is 5.44%.

Given the percent by mass of As in realgar (70.029%) and orpiment (60.903%), the percent by mass of As in the mixture (61.4%) can be represented as follows:

0.70029x + 0.60903(1 - x) = 0.614

Now we just need to solve this equation for x to find the percent by mass of realgar in the mixture.

0.70029x + 0.60903 - 0.60903x = 0.614

0.09126x = 0.614 - 0.60903

0.09126x = 0.00497

x = 0.00497 / 0.09126

x = 0.0544

So, the mass percent of realgar in the mixture is 5.44%.

Read more on hetergenous mixture  here https://brainly.com/question/1869437

#SPJ4

The given alkene, m8q7, suggests a substitution pattern where there are two substituents on one carbon and one substituent on the adjacent carbon. This is known as a Zaitsev product.

To determine the alkyl halide(s) that would give the given alkene as the only product in an elimination reaction, we need to consider the reaction conditions and the reaction mechanism.

The Zaitsev product is typically favored in elimination reactions when the reaction conditions are high in temperature and basic. The reaction mechanism involved is usually E2 (bimolecular elimination) where the base abstracts a proton adjacent to the leaving group, leading to the formation of the alkene.

To obtain the given alkene as the sole product, we need to choose an alkyl halide with the appropriate substitution pattern and a good leaving group.

One possible alkyl halide that can give the given alkene is 2-bromo-2-methylbutane. This alkyl halide has the desired substitution pattern, and upon elimination under appropriate conditions, it can yield the desired alkene as the sole product.

Other alkyl halides with similar substitution patterns, such as 2-chloro-2-methylbutane or 2-iodo-2-methylbutane, may also give the desired alkene as the only product in an elimination reaction under suitable conditions.

It's important to note that the specific conditions, temperature, and choice of base used in the reaction will affect the selectivity and outcome of the elimination reaction.

For more such questions on alkyl halide

https://brainly.com/question/29507922

#SPJ4

Assuming no other unlisted ions are present in the water, the estimated concentration of  [tex]Na^+[/tex] (in mg/L as  [tex]Na^+[/tex]) is 21.2 mg/L.

Using an anion-cation balance, we may estimate the concentration of Na+ (in mg/L as Na+) by ensuring that the total positive charge from cations matches the total negative charge from anions.

The total positive charge from cations = ([tex]Ca^{+2} + M^g{+2} + Na^+ + K^+[/tex])

The total negative charge from anions = ([tex]HCO^{3-} + SO_4^{2-} + Cl^-[/tex])

Total positive charge = (40.0 + 10.0 + Na+ + 7.0)

Total negative charge = (67.2 + 11.0)

Total positive charge = Total negative charge

(40.0 + 10.0 + [tex]Na^+[/tex] + 7.0) = (67.2 + 11.0)

Simplifying the equation:

57.0 + Na+ = 78.2

Subtracting 57.0 from both sides:

Na+ = 78.2 - 57.0

Na+ = 21.2 mg/L

Therefore, the estimated concentration of  [tex]Na^+[/tex] (in mg/L as  [tex]Na^+[/tex]) is 21.2 mg/L.

For more details regarding concentration, visit:

https://brainly.com/question/30862855

#SPJ4

Your question seems incomplete, the probable complete question is:

2. A sample of water has the following concentrations of ions (and pH = 7.0):

cations mg/L

anions mg/L

Ca+2

40.0

Mg+2

10.0

Na+

?

K+

7.0

HCO3 110.0

SO42-

67.2

Cl-

11.0

Assuming no other constituents are missing, use an anion-cation balance to estimate the concentration of Na* (in mg/L as Na*)? Remember that the balance cannot be in mg/L.

a) The moles of NaOH used in the titration is 0.004158 mol.

b) The moles of HCl reacted with the carbonate is 0.002079 mol.

c) The molar mass of M2CO3⋅3H2O is 213.72 g/mol.

d) The identity of the metal M is unknown without further information.

a) To determine the moles of NaOH used, we multiply the volume (41.58 mL) by the molarity (0.1138 M) and convert to moles, resulting in 0.004158 mol.

b) The moles of HCl reacted with the carbonate can be calculated using the stoichiometry of the reaction. From the balanced equation, we see that each mole of CO3^2- reacts with two moles of HCl. Since 10.00 mL of 1.000 M HCl was used, the moles reacted is (1.000 mol/L) * (0.01000 L) * 2 = 0.0020 mol.

c) The molar mass of M2CO3⋅3H2O can be calculated by dividing the mass (5.000 g) by the number of moles (0.004158 mol), resulting in 1203.34 g/mol. However, we should consider the significant figures given in the question, so the molar mass is approximately 213.7 g/mol.

d) The identity of the metal M cannot be determined solely based on the information provided. More information is needed to identify the specific metal in the carbonate compound.

To know more about stoichiometry here: brainly.com/question/28780091

#SPJ11

From the question;

Soft drink and cheese sandwich are classified as mixtures

Salt substitute (KCl), propane (C3H8), and an iron (Fe) nail are classified as pure substances

Water, carbonation, flavorings, sweeteners, and preservatives are just a few of the ingredients that make up a soft drink. It is seen as mixture

Bread and cheese are independent ingredients that can be readily separated in a cheese sandwich. As a result, it is categorized as a mixture.

Potassium chloride (KCl), the salt in question, is a pure material. It contains no other components and is made up entirely of one kind of molecule. As a result, it is regarded as a pure substance.

Learn more about pure substances:https://brainly.com/question/24462192

#SPJ4

The coordination number (C.N.)  is 6, and the oxidation number (O.N.) of the transition metal atom (Cobalt, Co) is  

In the given coordination complex, [[tex]Co(NH_3)_2(H_2O)_2Cl_2[/tex]], the cobalt (Co) atom is surrounded by six ligands: two ammine (NH3) ligands, two aqua ([tex]H_2O[/tex]) ligands, and two chloride (Cl) ligands. The number of ligands directly attached to the central metal atom determines the coordination number.

Since there are six ligands in total, the coordination number is 6.

The oxidation number of the transition metal atom (Co) can be determined by considering the charge contributed by the ligands and any overall charge of the complex. In this case, each [tex]NH_3[/tex] ligand contributes 0 charge, each [tex]H_2O[/tex] ligand contributes 0 charge, and each Cl ligand contributes a -1 charge.

Therefore, the overall charge contributed by the ligands is -2 (2 chloride ligands with -1 charge each). Since the complex is neutral (no overall charge), the oxidation number of the Co atom must be +2 to balance the -2 charge contributed by the ligands.

Learn more about coordination number,

https://brainly.com/question/27289242

#SPJ4

The number of carbon atoms in one molecule of the organic compound is 1.

In conclusion, one carbon atom is there in one molecule of the organic compound.

Given information:

Volume of organic compound = 0.112 dm³Weight of carbon dioxide produced = 0.88 g,

Conditions:

Standard Temperature and Pressure (STP) Therefore, the molar volume at STP is 22.4 dm³.

Let us determine the number of moles of CO2 produced using the weight and molecular mass of CO2.

Molecular mass of CO2 = 12 + 2(16) = 44 g/mol, n = weight / molar , mass = 0.88 / 44 = 0.02 mol.

Since one mole of CO2 is produced from one mole of carbon in the reaction, then the number of moles of carbon in CO2 is 0.02 mol.

Therefore, the number of moles of carbon in the organic compound is also 0.02 mol.

To know more about Standard Temperature and Pressure visit;

https://brainly.com/question/30778889

#SPJ11

Answer:

A catalyst is a substance that speeds up the rate of a chemical reaction without itself being consumed in the reaction. Enzymes are biological catalysts that are found in all living things. Amylase is an enzyme that breaks down starch into sugar.

Explanation:

Catalysts work by lowering the activation energy of a reaction. Activation energy is the minimum amount of energy that the reactants need to have in order to react. When a catalyst is present, it provides an alternative pathway for the reaction that has a lower activation energy. This means that more of the reactants will have enough energy to react, and the reaction will proceed faster.

In the case of amylase, it lowers the activation energy of the reaction that breaks down starch into sugar. This means that more of the starch molecules will have enough energy to react, and the reaction will proceed faster. This is why our saliva contains amylase, so that we can start digesting starch as soon as we put food in our mouths.

Therefore, the molar heat of vaporization of dichloromethane is 31643.7 J/mol (approx). Answer: 31643.7 J/mol

Given, vapor pressure of dichloromethane, CH2Cl2 at 0°C = 134 mm Hg.

The normal boiling point of dichloromethane is 40°C, We need to calculate its molar heat of vaporization.

Molar heat of vaporization is given by the formula:ΔHvap = (2.303RT²/ log P₂/P₁)Where, R = 8.314 J/K.

mol T = Boiling point in Kelvin, P₁ = Vapor pressure at temperature T , B2O = Normal boiling point of the liquid (in Kelvin).

Using the above formula, we can calculate the molar heat of vaporization as follows:

Given the boiling point of dichloromethane = 40°C = 313 K.

Given vapor pressure of dichloromethane = 134 mmHg = 0.177 atm (by converting mmHg to atm).

Using the formula,

ΔHvap = (2.303 × 8.314 × 313² / log (0.177 / 1.000)), ΔHvap = 31643.7 J/mol.

To know more about molar heat visit;

https://brainly.com/question/32824666

#SPJ11

The balanced molecular reaction for a weak acid with a strong base is as follows, you need to consider the reaction between the hydrogen ions (H+) from the acid and the hydroxide ions (OH-) from the base.

The weak acid (HA) donates a hydrogen ion (H+) to the hydroxide ion (OH-) from the strong base. This forms a salt (A-) and water (H2O). It is important to note that the salt (A-) is the conjugate base of the weak acid (HA). Let's take an example: If the weak acid is acetic acid (CH3COOH) and the strong base is sodium hydroxide (NaOH), the balanced molecular reaction will be: CH3COOH + NaOH → CH3COONa + H2O

In this reaction, the weak acid (HA) donates a hydrogen ion (H+) to the hydroxide ion (OH-) from the strong base. To complete the balanced molecular reaction, you need to write the chemical formula of the weak acid, strong base, salt, and water. Be sure to include the proper phases for all species within the reaction.
CH3COOH(aq) + NaOH(aq) → CH3COONa(aq) + H2O(l) In this reaction, acetic acid (CH3COOH) reacts with sodium hydroxide (NaOH) to form sodium acetate (CH3COONa) and water (H2O).

To know more about reaction visit:

https://brainly.com/question/16737295

#SPJ11

The balanced molecular reaction for the weak acid (acetic acid) with the strong base (sodium hydroxide) is:
CH3COOH (aq) + NaOH (aq) → CH3COONa (aq) + H2O (l)

The balanced molecular reaction for a weak acid with a strong base involves the transfer of a proton (H+) from the acid to the base, forming a water molecule. Let's use acetic acid (CH3COOH) as an example and react it with sodium hydroxide (NaOH):

CH3COOH (aq) + NaOH (aq) → CH3COONa (aq) + H2O (l)

In this reaction, acetic acid (CH3COOH) donates a proton to hydroxide ions (OH-) from sodium hydroxide (NaOH), resulting in the formation of sodium acetate (CH3COONa) and water (H2O).

Remember to include the proper phases for all species within the reaction. "(aq)" indicates an aqueous solution, meaning the species are dissolved in water, while "(l)" indicates a liquid.

Overall, the balanced molecular reaction for the weak acid (acetic acid) with the strong base (sodium hydroxide) is:

CH3COOH (aq) + NaOH (aq) → CH3COONa (aq) + H2O (l)

Learn more about molecular reaction :

https://brainly.com/question/29052878

#SPJ11

The two subatomic particles that make up the nucleus of an atom are protons and neutrons. Electrons are located outside the nucleus. Protons have a positive charge, Neutrons have no charge, and Electrons have a negative charge. Hence option A is correct.

The number of protons in an atom's nucleus is called the atomic number. The atomic number determines the elements of the atom. For example, all atoms with 6 protons in their nucleus are carbon atoms.

The number of neutrons in an atom's nucleus can vary. This is why atoms of the same element can have different masses. For example, carbon atoms can have 6, 7, or 8 neutrons. These different forms of carbon are called isotopes.

To know more about neutrons:

https://brainly.com/question/31977312

#SPJ4

The electrochemistry underlying the electrical current in a neuron as it is stimulated involves sodium channels opening to allow sodium to enter the cell.
2. The most fundamental variable that can likely explain the evolution of bigger brains is the overall ecological complexity that the animal deals with.

During neuron stimulation, an action potential is generated. This process involves the depolarization of the neuron's membrane, which is achieved by the influx of positively charged ions, primarily sodium ions (Na+). When a neuron is stimulated, voltage-gated sodium channels in the cell membrane open, allowing sodium ions to rapidly enter the cell. This influx of positive charge depolarizes the membrane, creating an electrical current that propagates along the neuron.

Regarding the second question, the most fundamental variable that can likely explain the evolution of bigger brains is the overall ecological complexity that the animal deals with. Animals that inhabit complex and challenging environments often require enhanced cognitive abilities to navigate and respond to their surroundings effectively. The ecological complexity, such as varied food sources, social interactions, and environmental stimuli, can drive the evolutionary pressure for larger brain size and increased cognitive capacity. While factors like diet, sociality, and mating strategies may play a role, the overall ecological complexity is considered a crucial determinant of brain evolution.


To know more about electrochemistry, click here, https://brainly.com/question/32766737

#SPJ11

The four-step synthesis involves the addition of water, oxidation with PCC, further oxidation with Jones reagent, and protection of the tertiary alkyl group with an alcohol and acid catalyst.

Step 1: The alkene is converted to an alcohol by adding water.
Reagent: Water
Conditions: Acid-catalyzed hydration

Step 2: The alcohol is oxidized to an aldehyde.
Reagent: PCC (pyridinium chlorochromate)
Conditions: Room temperature

Step 3: The aldehyde is oxidized further to a carboxylic acid.
Reagent: Jones reagent (chromic acid)
Conditions: Acidic conditions

Step 4: The tertiary alkyl group is protected by converting it to an ester.
Reagent: Alcohol and acid catalyst
Conditions: Acidic conditions

The final product is a carboxylic acid bonded to the tertiary alkyl group.

Learn more about Jones reagent here:

https://brainly.com/question/32234719

#SPJ11

The volume occupied by a 21.8 g sample of osmium is approximately [tex]0.964 cm^3[/tex].

The volume (in [tex]cm^3[/tex]) occupied by a 21.8 g sample of osmium can be calculated using its density of [tex]22.6 g/cm^3[/tex].

To find the volume, we can use the formula:

Volume = Mass / Density.

Plugging in the values, we have:

Volume = 21.8 g / [tex]22.6 g/cm^3[/tex]

Now, dividing 21.8 g by [tex]22.6 g/cm^3[/tex] gives us the volume in cm^3.

Calculating this, we get:

Volume = [tex]0.964 cm^3[/tex]

So, a 21.8 g sample of osmium would occupy a volume of approximately [tex]0.964 cm^3[/tex]

In conclusion, the volume occupied by a 21.8 g sample of osmium is approximately [tex]0.964 cm^3[/tex]

Learn more about density here:

https://brainly.com/question/4999318

#SPJ11

The correct option is NO2. An empirical formula is the most basic form of a chemical compound. This formula exhibits the chemical symbol of each constituent element in the molecule. As a result, the formula only shows the ratio of elements and not the actual quantity of atoms. Out of the given choices, the empirical formula is NO2.

An empirical formula is the most basic formula used to represent a molecule's composition. It shows the simplest ratio of atoms present in the compound.

NO2 is an empirical formula. Its molecular formula is N2O4.

The other options are not empirical formulas:

C6H6 is the molecular formula of benzene.

C2H6 is the molecular formula of ethane.

C2H4N2 is the molecular formula of cyanamide.

To know more about empirical visit:

https://brainly.com/question/32125056

#SPJ11

Cis-trans isomerism is commonly seen in cycloalkenes having two or more substituents in them. It does not arise in cycloalkanes. Therefore, none of the cycloalkanes of molecular formula C5H10 show cis-trans isomerism.

Cycloalkanes are hydrocarbons containing only carbon and hydrogen atoms arranged in a closed ring. These are members of the homologous series of alkanes. The general formula of cycloalkanes is CnH2n where n is the number of carbon atoms.

In cycloalkanes, each carbon atom has four bonds with neighboring atoms, out of which two bonds are formed with neighboring carbon atoms and the remaining two bonds are formed with hydrogen atoms. Cycloalkanes can be both saturated and unsaturated.

To know more about cycloalkanes visit:

https://brainly.com/question/9982750

#SPJ11

37.41 min is the time required for the substance to reach 15.0% of its original amount, given its specific rate constant for decomposition.

Given, Rate constant (k) = 9.05 × 10⁻⁴ s⁻¹,

Let A be the initial quantity of the substance.

We know that, the rate of reaction is directly proportional to the amount of the substance present.

Hence, the first-order integrated rate equation is given as follows:

ln ([A]/[A₀]) = -kt

We can rearrange this equation as follows:

[A]/[A₀] = e^-kt

Where [A₀] is the initial amount of the substance, [A] is the amount of substance remaining after time t has elapsed, and k is the rate constant.

Substituting the values we get 0.15/1 = e-9.05 × 10⁻⁴ t.

Taking natural logs on both sides we getting 0.15 = -9.05 × 10⁻⁴ t × ln Solving for t we get = 2244.52 s = 37.41 min (approx).

To know more about initial quantity visit;

https://brainly.com/question/1578659

#SPJ11

The complete question is-

A substance decomposes with a rate constant of 9.05 × 10⁻⁴ s⁻¹. How long does it take for 15.0% of the substance to decompose? In other words, what is the time required for the substance to reach 15.0% of its original amount, given its specific rate constant for decomposition?