B. Doubling The Distance Between Capacitor Plates Will Reduce The Capacitance Two-Fold.
What is Capacitor?Capacitor is an electrical device used to store energy. It is composed of two conducting plates separated by an insulating material called the dielectric. When a voltage is applied to the two plates, an electric field forms between them, storing energy in the form of an electrical charge. Capacitors are used in a variety of applications, such as in filter circuits, timing circuits, and power supply circuits.
The capacitance of a capacitor is directly proportional to the area of the plates and inversely proportional to the distance between the plates. Therefore, when the distance between the plates is doubled, the capacitance is halved.
To learn more about Capacitor
https://brainly.com/question/27258294
#SPJ1
an energy bill indicates that a customer used 1027 kwh in july. how many joules did the customer use?
According to an energy bill, a client used 1027 kilowatt hours (kwh) in July. Did the customer consume the stated 1 joules = 3600 joules?
Does 1 L have a weight of common ratio g under ideal circumstances? or is it chemical?Physically, it is colorless, odorless, and a gas at ambient temperature with a weight of 1.260 g per liter under normal circumstances. It reacts with acetone and is chemically combustible, polymerizing to make polyethylene.
Which of following claims concerning alterations in the physical and chemical world is accurate?The following assertion about chemical and physical changes is true: C) Physiological changes always result in the creation of new substances. In nature, there are two different types of change: chemical development and physical change. No new chemicals are created, only the physicochemical characteristics of existing substances are temporarily altered.
To know more about energy visit :
https://brainly.com/question/1932868
#SPJ1
High-frequency signals are often transmitted along a coaxial cable, such as the one shown in the figure (Figure 1) . For example, the cable TV hookup coming into your home is a coaxial cable. The signal is carried on a wire of radius R1 while the outer conductor of radius R2 is grounded (i.e., at V=0V). An insulating material fills the space between them, and an insulating plastic coating goes around the outside.1) Find an expression for the capacitance per meter of a coaxial cable. Assume that the insulating material between the cylinders is air.Express your answer in terms of the given quantities and constants ? and ?0.2) Evaluate the capacitance per meter of a cable havingR1=0.20mm and R2=4.3mm.Express your answer using two significant figures.
The capacitance per meter of a cable having R₁=0.20 mm and R₂=4.3 mm is 2.2 pF/m (using two significant figures).
What is Capacitance?
Capacitance is a property of an electrical circuit that describes its ability to store electrical charge. It is defined as the ratio of the amount of electric charge stored in a capacitor to the voltage applied across it. The unit of capacitance is the farad (F), which is defined as the amount of capacitance that stores one coulomb of charge when one volt is applied across it.
The capacitance per meter of a coaxial cable can be found using the formula:
C = (2πε₀/ln(R₂/R₁)) * (1/d)
where ε₀ is the permittivity of free space [tex]\mathrm{ (8.85 \times 10^{-12} F/m)}[/tex] , ln is the natural logarithm, R₁ is the radius of the inner wire, R₂ is the radius of the outer conductor, and d is the distance between the two conductors.
Since air is the insulating material between the cylinders, we can assume that its relative permittivity is equal to 1. Therefore, the capacitance per meter of a coaxial cable becomes:
C = (2πε₀/ln(R₂/R₁))
Substituting the given values of R₁ and R₂, we get:
C = (2πε₀/ln(4.3 mm/0.20 mm)) = 2.2 pF/m
Therefore, the capacitance per meter of a cable having R₁=0.20 mm and R₂=4.3 mm is 2.2 pF/m (using two significant figures).
Learn more about Capacitance from given link
https://brainly.com/question/27393410
#SPJ1
when you step outside and feel the heat of the sun on your skin which form of heat transfer is this?
The form of heat transfer that occurs when you step outside and feel the heat of the sun on your skin is radiation.
Radiation is a type of heat transfer that occurs through electromagnetic waves. These waves can travel through a vacuum (such as space) and do not require a medium to transfer heat. In the case of the sun, it emits radiation in the form of visible light, ultraviolet light, and infrared radiation, which are all forms of electromagnetic waves. When these waves come into contact with your skin, they are absorbed by the molecules in your skin, causing them to vibrate and produce heat. This is why you feel the warmth of the sun on your skin, even though the air temperature may be relatively cool. Radiation is different from conduction and convection, which are two other forms of heat transfer. Conduction is the transfer of heat through direct contact between two objects, while convection is the transfer of heat through the movement of fluids (such as air or water). In contrast, radiation can transfer heat through empty space, and does not require a medium to transfer heat. In summary, when you step outside and feel the heat of the sun on your skin, this is an example of radiation, a form of heat transfer that occurs through electromagnetic waves.
To know more about heat transfer please refer: https://brainly.com/question/2492603
#SPJ4
Which of the following best explains why, at a constant voltage, warmer solutions are ejected more quickly than cooler ones?
A. The droplets have a smaller volume at higher temperatures.
B. The surface tension is lower for solutions at higher temperatures.
C. The electrical forces grow smaller as temperature increases.
D. The electrical forces grow larger as temperature increases.
The correct option is D. The electrical forces grow larger as temperature increases. Because, The greater the electric field strength, the greater the force applied to the liquid, which causes it to eject more quickly.
The speed at which a liquid is ejected from an electrospray ionization source depends on the electric field strength, surface tension, and viscosity of the liquid. The electric field strength is determined by the voltage applied to the liquid. As the temperature of the solution increases, its viscosity decreases, allowing it to flow more easily. This means that the electrical forces on the liquid are greater at higher temperatures, causing it to be ejected more quickly. Hence Correct option is : D.
To know more about Electric field , here
brainly.com/question/8971780
#SPJ4
how to convert lbs to newtons
To convert pounds (lbs) to newtons, you can use the following conversion factor: 1 pound = 4.44822 newtons
"Pounds weight" as a unit of measurement, then it's a term that has been used historically in the English system of weights and measures. In this system, the pound (lb) was defined as a unit of mass, not weight, and was originally based on the weight of a grain of barley.
However, because weight is the force exerted on an object by gravity, the weight of an object can vary depending on the strength of gravity in a particular location. To address this, a "pounds weight" was introduced as a way to standardize weight measurements in different locations.
So, to convert x pounds to newtons, you can use the formula:
x pounds * 4.44822 newtons/pound = y newtons
For example, if you want to convert 50 pounds to newtons, you can use the formula:
50 pounds * 4.44822 newtons/pound = 222.41 newtons
Therefore, 50 pounds is equivalent to 222.41 newtons
To know more about pounds here
https://brainly.com/question/29719951
#SPJ4
is linear momentum conserved
Linear momentum is conserved if the total momentum of a system before and after an interaction or collision remains the same.
Linear momentum is conserved if the total momentum of a closed system remains constant over time. If the total momentum is the same in both the initial and final states, then the linear momentum is conserved. This is known as the law of conservation of linear momentum.
The conservation of linear momentum is applicable to all systems where no external forces are acting on the system. External forces may include friction, air resistance, or other forms of resistance. Therefore, it's important to consider all the forces acting on the system before determining if linear momentum is conserved.
To know more about the linear momentum, here
brainly.com/question/27988315
#SPJ4
--The complete question is, How do you know if linear momentum is conserved?--
by how many orders of magnitude does density vary for metals
The density of metals can vary by orders of magnitude, meaning the difference between the densest and least dense metals can be multiple times greater than the difference between the densest and least dense other materials.
For example, the densest metal is osmium, which has a density of 22.6 g/cm3. The least dense metal is lithium, which has a density of 0.53 g/cm3. The difference between these two metals is approximately 42 times greater than the difference between the densest and least dense non-metals. The density of metals also varies based on their atomic structure, with heavier atoms having a greater density than lighter atoms. Additionally, the density of metals can be affected by temperature, with higher temperatures leading to lower densities.
To know more about density please refer:
https://brainly.com/question/6329108
#SPJ4
A net force of 10.5 N accelerates a 45 kg car across a level parking lot. What is the magnitude of the car’s acceleration?
Answer:
the magnitude of the car's acceleration is 0.2333 m/s^2.
Explanation:
To find the magnitude of the car's acceleration, we can use the formula:
a = F/m
where a is the acceleration, F is the net force acting on the car, and m is the mass of the car.
In this problem, F = 10.5 N and m = 45 kg. Substituting these values into the formula, we get:
a = 10.5 N / 45 kg
a = 0.2333 m/s^2
Therefore, the magnitude of the car's acceleration is 0.2333 m/s^2.
he single period tv/m lump sum formula can be used to solve for pv, fv, or r. which is the correct formula?
To find PV, FV, or r, apply the one period Although on lump sum formula. FV = Fv (1+r) FV-PV-PV/1+r PV-FV/1+r
Describe formula.
The meaning of a formula. (Page 1 of 2) 1a: a predetermined set of phrases used in rituals or ceremonies. b: a formalized assertion meant to convey a fundamental fact or principle, especially as a starting point for discussion or action. Recipe 2a(1) The manufacturer of the product won't divulge the formula's secret ingredients. prescription (number 2)
The % formula is what.
To determine the quantity or percentage of an item in terms of 100, use the percentage formula. Per cent simply means one in a hundred. With the percentage formula, a number between 0 and 1 can be expressed. A number that is expressed as a percentage of 100 is what it is. It is mostly used to evaluate and determine ratios and is represented by the symbol %.
To know more about formula visit:
https://brainly.com/question/25519661
#SPJ1
The diagram below shows the orbit of a satellite around the Sun.
At which point does the satellite have the least gravitational potential energy?
A. Point C
B. Point A
C. Point B
D. Point D
The point C is the point where the satellite would have the least gravitational potential energy
What is meant by gravitational potential energy?Gravitational potential energy is the energy that an object possesses by virtue of its position in a gravitational field. It is defined as the energy that an object has due to its height above a reference level in a gravitational field, such as the Earth's gravitational field.
The gravitational potential energy of an object is directly proportional to its mass, the acceleration due to gravity, and its height above the reference level. When an object is raised to a higher altitude, it gains potential energy, which can be converted into kinetic energy as it falls back down to a lower altitude. This potential energy is a form of stored energy that can be converted into other forms of energy, such as kinetic energy, thermal energy, or electrical energy, depending on the type of system in which the object is located.
Read more on gravitational potential energy here:https://brainly.com/question/15849218
#SPJ1
how to convert 27 degrees c to f?
The temperature can be converted by first multiplying 27 by 9 over 5. Then, to get 80.6 degrees Fahrenheit, multiply 32 by 48.6.
The temperature scale known as the Fahrenheit scale was derived from one that physicist Daniel Gabriel Fahrenheit suggested in 1724. The unit is the degree Fahrenheit.
On the Celsius scale, one of the two temperature scales used in the International System of Units (the other being the Kelvin scale), the unit of temperature is the degree Celsius.
Fahrenheit was an early developer of the thermometer as we know it, thus he naturally needed to mark out different temperatures on them. He created the scale that is today known as Fahrenheit.
To learn moore about Fahrenheit please visit
https://brainly.com/question/516840
#SPJ4
mechanics is not an abstract or even an applied science; it is a pure science. (true or false)
It is False to say that mechanics is a pure science and not an abstract or even an applied one.
Physics' branch of mechanics is concerned with the investigation of motion and the conduct of physical systems when subjected to external forces. It is typically regarded as a subset of applied physics since its concepts are frequently employed to resolve issues in the real world, such as the creation of buildings, machinery, and vehicles.
Nonetheless, because it aims to comprehend the underlying ideas that guide the behaviour of physical systems, mechanics can also be regarded as a pure science. For instance, modern mechanics is largely based on the principles of motion discovered by Isaac Newton in the 17th century.
To learn more about Mechanics :
https://brainly.com/question/29633640
#SPJ4
how to convert lbf to n
To convert pounds-force (lbf) to newtons (N), you can use the conversion factor: 1 lbf = 4.4482 N
LBF stands for "pounds-force," which is a unit of force commonly used in the United States and other countries that still use the Imperial system of units.
A pound-force is defined as the force required to accelerate a mass of one pound at a rate of 32.174 feet per second squared (ft/s²) in a gravitational field. This means that the weight of an object in pounds can be converted to pounds-force by multiplying it by 32.174 ft/s², which is the acceleration due to gravity at the Earth's surface.
The pound-force is related to the metric unit of force, the newton (N), through the conversion factor of 1 pound-force = 4.4482 newtons. This means that one pound-force is equivalent to 4.4482 newtons of force.
This means that one pound-force is equivalent to 4.4482 newtons of force. To convert from pounds-force to newtons, multiply the value in pounds-force by the conversion factor of 4.4482. For example, to convert 10 pounds-force to newtons:
10 lbf = 10 x 4.4482 N
10 lbf = 44.482 N
To know more about pounds here
https://brainly.com/question/29719951
#SPJ4
how big is the black hole at the center of the milky way
At the center of our galaxy lies the supermassive black hole Sagittarius A*, often abbreviated Sgr A*. This giant is about 4 million times the mass of the sun and about 14.6 million miles (23.6 million kilometers) in diameter.
In physics, the Milky Way refers to the galaxy in which our solar system resides. The Milky Way is a barred spiral galaxy, meaning it has a central bar-shaped structure with arms spiraling out from it. The galaxy is estimated to be around 13.6 billion years old and contains billions of stars, as well as gas, dust, and dark matter.
The Milky Way has a diameter of approximately 100,000 light-years and is located about 26,000 light-years from the galactic center. It rotates once every 240 million years, with stars closer to the center moving faster than those on the outer edges. The gravitational force of the Milky Way holds the solar system in its orbit.
The study of the Milky Way is important in astrophysics as it provides insight into the evolution and formation of galaxies.
To learn more about Milky way visit here:
brainly.com/question/2806083
#SPJ4
A king’s crown, presumed to be pure gold, has a mass of 1.00 kg. When submerged in water its apparent mass is measured to be 0.92 kg. Is the crown made of pure gold (p = 19.3 kg/liter)?
The crown is not made up of pure gold as its density which is calculated is observed to be less than that of the pure gold.
The formula for an object's density is ρ = m/v.
where,
m is mass
v is volume
Mass of the crown is given as 1 kg.
When submerged in water, its mass becomes 0.92 kg.
So, volume of water displaced is 0.08 L.
Density of pure gold is given as, ρ gold = 19.3 kg/L
The amount of water that is displaced has the same volume as the crown. Let us calculate the density of crown,
ρ crown = m/v = 1/0.08 = 12.5 kg/L
Comparing the above obtained value with the density of pure gold we have, ρ crown < ρ gold.
Thus, the crown is not made up of pure gold.
To know more about density:
https://brainly.com/question/7962766
#SPJ4
how to convert 600 seconds in minutes?
The conversion of 600 seconds is equal to 10 minutes. Minutes are a unit of time, measured in increments of 1/60th of an hour. Seconds are a unit of time, measured in increments of 1/60th of a minute.
Time is a measure of the duration, between two events or points in time. It is often defined as the indefinite continued progress of existence and events that occur in an apparently irreversible succession from the past, through the present, to the future.
To convert 600 seconds into minutes, simply divide 600 seconds by 60 seconds.
60 seconds = 1 minute
600 seconds / 60 seconds = 10 minutes
One minute is equal to 60 seconds. Minutes are commonly used in everyday life to measure the duration of events and activities. One second is equal to 1/60th of a minute, or 1/3600th of an hour. Seconds are commonly used to measure the duration of very short events, such as the blink of an eye or the time it takes for a person to react.
To learn more about minutes click here https://brainly.com/question/15600126
#SPJ4
a point charge is surrounded by a spherical gaussian surface of radius r. if the sphere is replaced by a cube of side r, will £e be larger, smaller, or the same? ex
The electric flux through the cube will be the same as the flux through the spherical gaussian surface, provided that the cube is large enough to contain the entire sphere.
For a point charge, the electric flux density is proportional to 1/r^2, where r is the distance from the charge. The total flux through a spherical gaussian surface of radius r is given by the product of the flux density and the surface area of the sphere, which is proportional to r^2.
Similarly, the total flux through a cube of side r that encloses the same point charge is also proportional to r^2, as long as the cube is large enough to contain the entire sphere.
To know more about the electric flux, here
brainly.com/question/14544020
#SPJ4
--The complete question is, A point charge is surrounded by a spherical gaussian surface of radius r. if the sphere is replaced by a cube of side r, will electric flux be larger, smaller, or the same?--
What causes lightning?
Build up of electric charges in the clouds
Flow of electric charges among clouds
Light energy created in the clouds
Reflection of light by the clouds
according to the environment-industry-organization fit model, cell 2 represents which of these environments? a) simple-stable environment. b) complex-stable environment. c) simple-unstable environment. d) complex-unstable environment. e) none of these.
According to the environment-industry-organization fit model, cell 2 represents a complex-stable environment. So option b. is the correct answer.
Industry and organizational leaders monitor environments to determine, foresee, and manage trends, problems, and possibilities that their organizations and industries face. Environments have an enormous number of external elements, and elements are distinct where elements stay the same or change slowly. Stability refers to the rate at which modification occurs. In a stable environment, the transition is slow. A dynamic environment is transforming rapidly. In the environment industry organization model, cell 2 just means the complex stable environment.
To learn more about the environment-industry-organization fit model visit here:
https://brainly.com/question/30788175
#SPJ4
QuestionThree charges each of magnitude qare placed at the corners of an equilateral triangle, the electrostatic force on the charge placed at the center is (each side of triangle is L)DiagramAZeroB14πϵ0q2L2C14πϵ03q2L2D112πϵ0q2L2
The electrostatic force on the charge placed at the center of an equilateral triangle with three charges each of magnitude q is zero due to symmetry.
The electrostatic force on the charge placed at the center of an equilateral triangle with three charges each of magnitude q can be calculated using Coulomb's law. Coulomb's law states that the electrostatic force between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
In this case, the distance between the charge at the center and each of the three charges at the corners of the triangle is [tex]L/\sqrt{3}[/tex] (since the triangle is equilateral). Therefore, the electrostatic force on the center charge due to one of the charges at the corner of the triangle is:
[tex]F = k*q*q/(L/\sqrt{3} )^2[/tex]
k: Coulomb constant (1/4πϵ0).
Since there are three charges at the corners of the triangle, the total force on the center charge is the vector sum of the forces due to each of the three charges.
By using vector addition and the fact that the forces are all equal in magnitude and are separated by angles of 120 degrees, the total electrostatic force on the center charge can be calculated to be:
Ftotal = 0
Learn more about electrostatic force here:
https://brainly.com/question/9774180
#SPJ4
If Alex wishes to rotate his skateboard, then he must apply a. A) torque. B) rotational maneuver. C) pause before bearing down on the board.
If Alex wishes to rotate his skateboard, he must apply a torque.
Torque is the twisting or rotational force that is required to cause an object to rotate around an axis or pivot point. In the case of a skateboard, if Alex wants to rotate the board, he needs to apply a torque by pushing on one end of the board while keeping the other end stationary or pushing in the opposite direction. This will cause the board to rotate around its center of mass.
A rotational maneuver is a general term that could refer to any type of rotational movement or action, whereas a pause before bearing down on the board is not directly related to the act of rotating the skateboard.
Therefore, option A) torque is correct option. If Alex wishes to rotate his skateboard, he must apply a torque
for such more question on rotation
https://brainly.com/question/25803184
#SPJ4
A rock climber moves
2
m
2 m2, space, start text, m, end text to her right and then climbs
4
m
4 m4, space, start text, m, end text up the side of a cliff.
A rock climber moves 2 m to her right and then climbs 4 m up the side of a cliff.
The correct answer is 63.4
tan-1 = 4/2
= 63.4
What is a cliff?
A geologic fault's movement, a landslide, or occasionally rock slides or falling rocks that alter the differential erosion of the rock layers result in the formation of an escarpment (or scarp), a type of cliff.The base of the majority of cliffs slopes with scree. These are typically exposed piles of broken rock that are found in arid regions or beneath tall cliffs. A soil slope may hide the talus in locations with greater moisture levels. Several cliffs also include rock shelters or tributary waterfalls. Often a ridge's end is where a cliff ends, leaving behind mushroom rocks or other kinds of rock columns.Sea cliffs may develop along a retreating shoreline as a result of coastal erosion.To know more about cliffs, click the link given below:
https://brainly.com/question/29065952
#SPJ1
FILL IN THE BLANK. electrical devices that produce arcs when installed in volatile environments are sealed in special enclosures to prevent _____.
Electrical devices that produce arcs when installed in volatile environments are sealed in special enclosures to prevent explosions.
Electrical devices that produce arcs, such as switches, relays, and circuit breakers, generate a high amount of heat and electromagnetic energy. When installed in volatile environments, such as areas with flammable gases or liquids, the arcs generated by these devices can ignite the surrounding environment, leading to fires or explosions. To prevent this from happening, these devices are sealed in special enclosures that prevent the release of sparks or hot gases into the environment. These enclosures are designed to contain any potential explosions or fires within the enclosure, protecting the surrounding area from any harm.
To know more about Electrical devices, here
brainly.com/question/2538188
#SPJ4
Listening occurs when your ears pick up sound waves being transmitted by a speaker. (True/False)
The given statement, listening occurs when your ears pick up sound waves being transmitted by a speaker. is true, beacuse the sound waves vibrate the eardrum, which in turn sends signals to the brain that are interpreted as sound.
Listening occurs when sound waves are transmitted by a speaker and picked up by the ears. Sound waves are mechanical waves that propagate through a medium, such as air, and cause pressure changes that the ear can detect. When the sound waves reach the ear, they cause the eardrum to vibrate, which then sets off a chain of events that ultimately lead to the generation of electrical signals in the auditory nerve.
These electrical signals are then transmitted to the brain, where they are interpreted as sound. Without the sound waves being transmitted by a speaker or some other sound source, there would be nothing for the ear to detect, and hence, no listening would occur.
To know more about the sound waves, here
brainly.com/question/11045049
#SPJ4
1 of 671 of 67 Items
00:11
Question
Jayden was given a marshmallow and a syringe in class to experiment with. She placed the marshmallow in the syringe and sealed the end. When she depressed the plunger of the syringe what happened to the marshmallow and why?
Responses
A The increased pressure, allowed the molecules to spread apart, and caused the marshmallow to grow larger.The increased pressure, allowed the molecules to spread apart, and caused the marshmallow to grow larger.
B The increased pressure, pushed the molecules closer together, and caused the marshmallow to shrink.The increased pressure, pushed the molecules closer together, and caused the marshmallow to shrink.
C The decreased pressure, allowed the molecules to spread apart, and caused the marshmallow to grow larger.The decreased pressure, allowed the molecules to spread apart, and caused the marshmallow to grow larger.
D The decreased pressure, pushed the molecules closer together, and caused the marshmallow to shrink.
The marshmallow shrunk as a result of the increased pressure's effect on the molecules' tendency to cluster together (option b).
Stress equates to pressure, right?Between pressure and stress, there are several distinctions. Although both of these words are frequently used interchangeably. Generally speaking, the force applied per unit area can be used to quantify pressure. The amount of force applied per unit area that a material experiences is referred to as stress, on the other hand.
What do you mean by pressure?When we feel compelled and intimidated, we tend to react in a worried manner. It typically takes place when we are faced with a circumstance that we don't feel in control of or can manage. whenever we are under stress, such as when we are trying to balance a lot of obligations.
To know more about Pressure visit:
https://brainly.com/question/12971272
#SPJ1
What is the velocity in meters per second of a runner who runs exactly 110 m toward the beach in 72 seconds
Responder:1,53m
Explicação: velocidade é igual a spaço sobre tempo isso dá 1,527metro por segundo
how to change in velocity to acceleration
Acceleration is the rate of change of velocity over time, and it is calculated by dividing the change in velocity by the time taken for the change to occur.
To change velocity to acceleration, the initial velocity and final velocity must be known, as well as the time taken for the change to occur.
The formula for acceleration is given by:
a = (v_f - v_i) / t
where a is acceleration, v_f is final velocity, v_i is initial velocity, and t is the time taken for the change in velocity to occur.
For example, if an object initially travels at 10 meters per second and then accelerates to a final velocity of 20 meters per second over a period of 5 seconds, the acceleration can be calculated as follows:
a = (20 - 10) / 5 = 2 meters per second squared
Therefore, the acceleration of the object is 2 meters per second squared.
Learn more about Acceleration:
brainly.com/question/12550364
#SPJ4
An advantage of subsurface (underground) coal mining is that it:A. employs more people than surface mining techniques and thus creates more jobs.B. is safer for the miners than surface mining techniques.C. is cheaper than surface mining techniques.D. All of these are advantages.
"An advantage of subsurface (underground) coal mining is that it employs more people than surface mining techniques and thus creates more jobs." So, the correct option is A.
Subsurface mining techniques are used when material ores are too deep to reach using surface mining techniques. Subsurface mining has the benefit of causing much less ground disturbance than surface mining. In actuality, it disturbs less ground than a tenth of what surface mining does.
When the ore body is too deep to be mined effectively by open pit, subsurface mining has advantages. The orebody's grades or quality are high enough to pay expenses. Compared to open pit mining, underground mining has a smaller environmental impact.
To know more about mining:
https://brainly.com/question/30235670
#SPJ4
The image below shows a force of 10 N being applied to an object. The force is being applied toward the right, and the object is accelerating toward the right. No other force is acting on the object. Examine the image, and then answer the question that follows.
A second force of 13 N is applied to the object. If this second force is applied toward the left while the first force is being applied toward the right, which of the following will occur?
A.
The object will immediately begin moving toward the left.
B.
The object will continue moving toward the right at the same speed.
C.
The object will continue accelerating toward the right.
D.
The object will immediately accelerate toward the left.
Answer:
the answer is A, the object will immediately begin moving toward the left.
how to find the velocity
To find velocity, you need to divide the distance traveled and the time it took to travel that distance.
Velocity is a vector quantity that indicates the rate of change of an object's position in a given direction. It is calculated by dividing the change in position of an object by the time interval over which the change occurred.
The formula for velocity is,
velocity = distance / time
For example, if a car traveled 100 meters in 10 seconds, the velocity would be,
velocity = 100 meters / 10 seconds
velocity = 10 meters per second
To know more about the velocity, here
brainly.com/question/13639113
#SPJ4
