Most of the people killed from the historical eruptions of composite volcanoes like Vesuvius (Italy) and St. Pierre (Martinique) died as a result of pyroclastic flows, the fast-moving clouds of hot gas and volcanic matter that the eruptions produce.
During these eruptions, extremely hot ash and lapilli, or bombs formed by volcanic eruptions, can move up to 700 mph, burying and instantly killing anyone in its path. Most of the people killed during this type of eruption likely died from asphyxiation on the spot, as the hot air produced prevents air from entering the lungs, or from thermal radiation.
As the ash and other materials spread, they also can send large pieces of debris hundreds of miles away, crushing anything in their path. The ash also absorbs moisture from the air and creates a thick, acidic fog that can lead to suffocation and extremely deadly acid rain. In addition to the direct effects of the volcano, these eruptions can also spread far-reaching plumes of toxic gases such as carbon dioxide and sulfur dioxide, which can cause asphyxiation, blindness, and, as with sulfur dioxide, long-term environmental damage. Even after an eruption has quieted, these gases can linger and cause further health issues, such as acid rain. The toxic gases can even travel downwind, posing another threat to residents.
To know more about pyroclastic flows, click here:
https://brainly.com/question/11735635
#SPJ4
Explain the difference between basic and nonbasic industries, and identify their economic sectors (primary, secondary, etc. ).
Which would be a better industry to assure economic growth in a settlement, basic or nonbasic? Explain your decision with use of vocabulary words and examples
Basic industries and nonbasic industries differ in their economic sectors and their impact on economic growth in a settlement. Basic industries are typically found in the primary and secondary sectors, while nonbasic industries are often part of the tertiary sector.
Basic industries are those that primarily extract or produce raw materials and goods, typically found in the primary and secondary sectors of the economy. Examples include agriculture, mining, manufacturing, and construction. These industries often contribute to the local economy by generating employment and creating a multiplier effect, where the income generated from these industries circulates and stimulates other sectors.
Nonbasic industries, on the other hand, are part of the tertiary sector and provide services rather than producing tangible goods. Examples include retail, healthcare, education, finance, and tourism. While nonbasic industries may not directly contribute to the production of goods, they play a crucial role in supporting the local economy by providing services to residents and visitors.
The choice between basic and nonbasic industries for ensuring economic growth in a settlement depends on various factors. Basic industries have a more direct impact on creating jobs and generating income, especially in resource-rich areas. They can also stimulate other sectors through the multiplier effect.
Learn more about Basic industries here:
https://brainly.com/question/32434428
#SPJ11
The west coast of South America has a(n) ________ continental margin and the east coast of North America has a(n) ________ continental margins.
The west coast of South America has an active continental margin and the east coast of North America has a passive continental margin.
Continental margins are the regions where the landmasses meet the ocean basins. The ocean basin and the continent are separated by the continental margin. It consists of three sections: the shelf, the slope, and the rise, and is separated from the abyssal plain by the continental slope. The three types of continental margins are passive, active, and transitional.
The west coast of South America is an active continental margin while the east coast of North America is a passive continental margin. A passive continental margin is a continental margin that lacks tectonic activity. It is defined by a wide shelf and slope that descends gradually into the deep-sea floor, with little or no volcanic or earthquake activity. Examples of passive continental margins include the East Coast of the United States, the Gulf of Mexico, and the coast of Western Africa.
An active continental margin is a continental margin that is associated with tectonic activity. They usually have narrow shelves and slopes that plunge steeply into the deep ocean floor. These margins are associated with convergent tectonic plate boundaries and have numerous volcanic and earthquake activities. The west coast of South America, where the Nazca Plate is colliding with the South American Plate, is an example of an active continental margin.
To learn more about continental margin
https://brainly.com/question/14633680
#SPJ11
Volcanic bombs originate ________. as erupted magma blobs that partly congeal before falling to the ground as ash particles that join together in the eruptive plume and fall as cobble-sized objects as blocks of volcanic rock ejected from an erupting volcanic crater as laser-guided, granite blocks launched from a supersonic jet
Volcanic bombs originate as erupted magma blobs that partly congeal before falling to the ground.
Hence, the correct answer is option a.
Volcanic bombs originate as erupted magma blobs that partly congeal before falling to the ground. When magma is ejected during a volcanic eruption, it is often in a molten or semi-molten state.
As the magma is propelled into the air, it undergoes rapid cooling due to the lower temperature and pressure. This causes the outer layer of the magma blob to solidify, forming a crust or shell around the still-liquid interior. The partially solidified magma continues to travel through the air as a projectile, propelled by the force of the eruption.
Eventually, the volcanic bomb falls to the ground, and its outer shell can be preserved, displaying characteristic shapes resulting from the movement and deformation during flight.
Learn more about volcanic bomb here:
https://brainly.com/question/15134165
#SPJ4
The given question is not properly written. Hence, the proper question is:
"Volcanic bombs originate ____________.
a. as erupted magma blobs that partly congeal before falling to the ground
b. as ash particles that join together in the eruptive plume and fall as cobble-sized objects
c. as blocks of volcanic rock ejected from an erupting volcanic crater
d. as laser-guided, granite blocks launched from a supersonic jet"
A secondary pollutant (a) forms in the stratosphere. (b) is transformed by sunlight or water. (c) cannot be directly tracked. (d) does not directly harm humans. (e) forms primarily from incomplete combustion.
(a) The secondary pollutant that fits the given description is ozone (O3).
Ozone forms in the stratosphere due to a series of photochemical reactions involving oxygen (O2) molecules and ultraviolet (UV) radiation from the Sun.
These reactions lead to the conversion of oxygen molecules into ozone. Ozone is an essential component of the stratosphere as it absorbs a significant portion of the Sun's harmful UV radiation. zone is transformed by sunlight. The energy from UV radiation breaks apart ozone molecules, resulting in the formation of oxygen molecules and oxygen atoms. The oxygen atoms can then react with other ozone molecules, leading to a cycle of formation and destruction known as the ozone-oxygen cycle.
Learn more about ozone here : brainly.com/question/27911475
#SPJ11
______ represent the largest igneous eruptions on Earth, with some covering tens of thousands of square kilometers.
Large igneous provinces represent the largest igneous eruptions on Earth, with some covering tens of thousands of square kilometers.
Large igneous provinces (LIPs) are massive volcanic events that involve the eruption of vast amounts of magma over extensive areas. They are characterized by their enormous size, covering tens of thousands of square kilometers or more.
LIPs result from mantle plumes, which are localized upwellings of hot, buoyant material from deep within the Earth's mantle. These plumes generate intense volcanic activity, leading to the eruption of enormous volumes of lava and the formation of extensive igneous rock formations.
LIPs have occurred throughout Earth's history and have played a significant role in shaping the planet's geology and influencing global climate patterns. They represent some of the largest and most impactful volcanic eruptions known on Earth.
To learn more about Large igneous provinces here: https://brainly.com/question/21595677
#SPJ11
Hot-spot tracks result from moving ________. Group of answer choices lithosphere above mantle plumes asthenosphere plates hot spots
Hotspot tracks are caused by plate movement.
Option a is correct .
A well-known example of a hot spot track is the Hawaiian Emperor Sea Range in the Pacific Ocean. The oldest volcanic structures in this chain, such as Emperor Seamount, are northwest of the currently active volcanoes in Hawaii. This spatial arrangement is the result of the Pacific plate moving over a stationary hotspot under the Earth's mantle.
Hotspot signatures provide clues about plate tectonics and plate motion. Examining the chronology of volcanic structures along these trajectories allows scientists to deduce the speed and direction of plate motion. Hotspot signatures also help us understand the dynamic nature of the Earth's interior and the processes that drive volcanic activity.
hence, Option a is correct .
To know more about Hot-spot tracks visit :
https://brainly.com/question/10202
#SPJ4
The correct question is :
Hot-spot tracks result from moving _____________.
a. plates
b. asthenosphere
c. mantle plumes
d. hot spots
A sample of an ancient sedimentary rock contains slightly less of the isotope carbon-13 than found in inorganic material. One possible explanation for this is that
Carbon-13 is a rare, stable isotope of carbon that occurs naturally in small amounts in the environment. The amount of carbon-13 found in organic material can be used to determine the age of the material.
Organic material that is older will have less carbon-13 than newer material because carbon-13 decays over time. A sample of an ancient sedimentary rock contains slightly less carbon-13 than found in inorganic material.
One possible explanation for this is that the organic material that was present in the sedimentary rock has decayed over time, leaving behind only the inorganic material. This is consistent with the fact that sedimentary rocks are formed from the accumulation of sediment over time, which can contain organic material.
Another possible explanation is that the organic material that was present in the sedimentary rock was not fully converted to inorganic material due to incomplete decay. This could occur if the sediment was buried quickly, preventing complete decay from occurring. In this case, the amount of carbon-13 in the sedimentary rock would be slightly lower than expected based on the age of the material.
Overall, the presence of less carbon-13 in an ancient sedimentary rock sample compared to inorganic material can be explained by the decay of organic material over time or incomplete decay due to rapid burial. These explanations are consistent with the known processes of sedimentary rock formation and decay of organic material.
Know more about sedimentary rock here:
https://brainly.com/question/29240254
#SPJ11
Beaches change size with every storm, but if you average over a few decades, the size of a typical sandy beach is usually controlled by:
Beaches change size with every storm, but if you average over a few decades, the size of a typical sandy beach is usually controlled by the amount of sediment available.
In the long run, it is the amount of sediment supplied to a beach that controls its size .
Beaches are formed by waves and currents that constantly move sand particles along the coastline. The sediment is deposited and becomes a beach over time.
The size and shape of a beach are constantly changing as the ocean and the land interact .A beach's size can be changed by the action of the waves, storms, and tides.
However, if you average the size of the beach over a few decades, the size of a typical sandy beach is usually controlled by the amount of sediment available.
The amount of sediment supplied to a beach is the primary factor that controls its size.
If there is a lot of sediment available, a beach will become wider and longer over time. Conversely, if there is a shortage of sediment, a beach will shrink or disappear altogether over time.
To know more about beaches refer here : brainly.com/question/28239074
#SPJ11
if an igneous rock has a coarse-grained texture AND has a felsic composition (abundant silica), then the igneous rock is called
If an igneous rock has a coarse-grained texture and a felsic composition (abundant silica), then the igneous rock is called granite.
A coarse-grained igneous rock has mineral crystals that are readily visible to the unaided eye. This suggests that the rock cooled gradually, giving large crystals enough time to form. High silica content in the rock is referred to as a felsic composition. Numerous minerals contain silica, and silica rich rocks are typically light in color.
A felsic composition in igneous rocks denotes a higher concentration of minerals like quartz, feldspar, and muscovite. Granite is the name given to coarse grained igneous rocks that have a felsic composition. Granite is a common type of rock that is distinguished by its clear crystals and light color, making it well known and used in building, sculpture, and other applications.
Learn more about igneous rock at:
brainly.com/question/23555197
#SPJ4
Physical clues of the volcano (swell of land, tilt of the volcano, earthquake measurements) can definitely predict a volcanic eruption true or false
The given statement "Physical clues of the volcano (swell of land, tilt of the volcano, earthquake measurements) can definitely predict a volcanic eruption" is False because physical clues can provide important information about volcanic activity, but they cannot definitively predict volcanic eruptions.
While physical clues such as a swell of land, tilt of the volcano, and earthquake measurements can provide valuable information about the behavior and activity of a volcano, they cannot definitively predict a volcanic eruption. Volcanic eruptions are complex geological events influenced by various factors, and predicting them with absolute certainty is extremely challenging.
These physical clues are indicative of volcanic activity and can serve as warning signs that a volcano may be becoming more active. For example, a swell of land or ground deformation can suggest the movement of magma beneath the surface. Tilt measurements can indicate changes in the volcano's shape, which may be caused by magma intrusions. Increased seismic activity, including earthquakes, can be a result of magma movement or the release of gases from the volcano.
Volcanic eruptions often involve complex interactions between various factors, including the characteristics of the magma, the structure of the volcano, and external influences such as hydrothermal systems and interactions with surrounding rocks. Monitoring systems and data analysis provide valuable information for assessing volcanic activity and issuing warnings to mitigate risks. However, predicting the exact timing and magnitude of an eruption remains a significant scientific challenge.
Therefore, while physical clues can provide important information about volcanic activity, they cannot definitively predict volcanic eruptions. Continued monitoring and research are crucial for improving our understanding of volcanoes and advancing eruption forecasting capabilities.
Know more about Volcanic eruptions here:
https://brainly.com/question/9856630
#SPJ11
Dunes form when currents (wind or water move in one direction. Much like asymmetrical ripples, they have a gentle slope on the upstream side and a steep slope on the downstream side (slip face). Use the shape of this dune to select the statement that most accurately describes the wind direction in the image.
i. The wind was blowing from left to right .
ii. The wind direction cannot be determined
iii. The wind was blowing from right to left.
Based on the description of the dune shape with a gentle slope on the upstream side and a steep slope on the downstream side (slip face), the statement that most accurately describes the wind direction in the image is "i. The wind was blowing from left to right."
Dunes form as a result of wind or water currents moving in a specific direction. The shape of the dune, with a gentle slope on the upstream side and a steep slope on the downstream side, indicates the direction from which the wind was blowing. In this case, the dune shape suggests that the wind was blowing from the left side of the image towards the right side. As the wind encounters the dune, it deposits sand particles on the gentle, windward side and erodes the steep, leeward side, creating the distinct shape observed. Therefore, statement i, "The wind was blowing from left to right," is the most accurate description based on the dune's morphology.
to learn more about water currents click here; brainly.com/question/28257613
#SPJ11
A ________ is a near surface, intrusive igneous rock body that results from local inflation of a horizontal sill.
A laccolith is a near-surface, intrusive igneous rock body that results from local inflation of a horizontal sill.
One of the three primary rock types, along with sedimentary and metamorphic rocks, is igneous rock, also known as magmatic rock. When lava or magma cools and solidifies, igneous rocks are created.
A body of intrusive rock known as a laccolith is supplied from below by a conduit and has a dome-shaped top surface and a level base.
When magma rising through the crust of the Earth starts to spread out horizontally and rips the host rock layers apart, a laccolith occurs.
Therefore, local inflation of a horizontal sill produces a near-surface intrusive igneous rock mass known as a laccolith.
To know more about igneous rock, visit:
https://brainly.com/question/30989504
#SPJ4
Which model represents a compound with a 1:2 ratio? please explain your answer.
The model that represents a compound with a 1:2 ratio is the Ionic Compound Model.
The Ionic Compound Model represents compounds composed of ions, which are charged particles. In an ionic compound, the ratio of positively charged ions (cations) to negatively charged ions (anions) determines its chemical formula.
When a compound has a 1:2 ratio, it means that for every one cation, there are two anions. This ratio indicates that the compound is made up of two negatively charged ions for every positively charged ion.
In the Ionic Compound Model, the cations and anions are represented as individual ions, and their charges are balanced to achieve electrical neutrality. The cations and anions are held together by strong electrostatic forces called ionic bonds.
One common example of an ionic compound with a 1:2 ratio is calcium chloride (CaCl2), where one calcium ion (Ca2+) combines with two chloride ions (Cl-) to form the compound. The ratio of one calcium ion to two chloride ions represents the 1:2 ratio in this compound.
Learn more about Ionic Compound here:
https://brainly.com/question/31921829
#SPJ11
Satellites can be used to study faults by ______. Multiple choice question. measuring the depth of the fault rupture analyzing subsurface rocks along faults comparing vegetation along faults before and after earthquakes analyzing changes in elevation before and after earthquakes
Satellites can be used to study faults by analyzing changes in elevation before and after earthquakes.
One of the key methods for studying faults using satellites is by analyzing changes in elevation before and after earthquakes. Satellite-based technologies such as interferometric synthetic aperture radar (InSAR) can measure tiny changes in the Earth's surface, allowing scientists to detect and monitor fault movements. By comparing elevation data obtained before and after an earthquake, researchers can identify the displacement and deformation along the fault. This information provides valuable insights into the behavior of faults, including their geometry, slip rates, and potential for future seismic activity. Analyzing changes in elevation is a powerful tool for understanding fault behavior and improving our understanding of earthquake processes.
to learn more aboutinterferometric synthetic click here; brainly.com/question/31891063
#SPJ11
best method of the correlation of sedimentary rock layers over a hundred million kilometers apart is by
The best method of correlating sedimentary rock layers over a hundred million kilometers apart is by using stratigraphic markers such as distinctive fossils or isotopic ratios.
The best method for correlating sedimentary rock layers over a hundred million kilometers apart is by using stratigraphic markers such as distinctive fossil assemblages, isotope ratios, or magnetic polarity reversals. These markers can be used to establish relative age relationships and identify specific time intervals in the rock layers. By comparing the presence or absence of these markers in different locations, geologists can infer the correlation of the rock layers and establish a chronological framework across large distances. Additionally, techniques such as radiometric dating can provide absolute age constraints for specific rock layers, further enhancing the correlation and understanding of sedimentary sequences.
Learn more about sedimentary rock:
https://brainly.com/question/29317586
#SPJ11
Regions with mountain glaciers that experience much surface melting in the summer typically are eroded:
Regions with mountain glaciers that experience significant surface melting in the summer are typically eroded through glacial erosion processes.
Glacial erosion occurs when glaciers move downslope, driven by gravity. As the glacier flows, it picks up rocks, sediment, and debris, acting as a powerful abrasive tool.
When the surface melting of glaciers is extensive, it leads to the formation of meltwater, which flows over and within the glacier. This meltwater acts as a lubricant, facilitating the movement of the glacier and enhancing its erosive power. As the glacier advances, it scours and scrapes the underlying bedrock, plucking and eroding the material. This process results in the formation of distinctive landforms, such as U-shaped valleys, cirques, and glacial lakes.
The combination of surface melting and glacial movement leads to the erosion and modification of the landscape in regions with mountain glaciers experiencing significant summer melting.
To learn more about gravity , click here:
brainly.com/question/31321801
#SPJ11
The highest daily temperatures and lowest nightly temperatures here on Earth are normally recorded about:
During the summer and winter solstices, the northern hemisphere experiences its highest daily temperatures and lowest nightly temperatures due to increased solar radiation and longer/shorter days, respectively.
The highest daily temperatures and lowest nightly temperatures here on Earth are normally recorded during the summer and winter solstices. During the summer solstice, which occurs around June 21st, the northern hemisphere experiences its longest day of the year, resulting in increased solar radiation and warmer temperatures.
On the other hand, during the winter solstice, which occurs around December 21st, the northern hemisphere experiences its shortest day of the year, resulting in less solar radiation and colder temperatures.
Therefore, during these times, the highest daily temperatures and lowest nightly temperatures are typically recorded.
To learn more about solstices
https://brainly.com/question/4172420
#SPJ11
If you've moved the view of the Court of the Patriarchs, double click on that to reset the view. Now select the "Temple Cap" and "Kayenta" items. The Temple Cap is the sedimentary unit just above the Navajo Sandstone and is colored blue. The Kayenta lies below the Navajo and is colored red. The colored regions show the distribution of these two units as viewed from above. Note that the boundaries between the Navajo and the overlying Temple Cap and underlying Kayenta nearly parallel the topographic contours (you may need to adjust the opacity of the topographic map). This indicates that the sedimentary layers here:_________
a. are essentially horizontal
b. have been tilted to a very steep angle
a. are essentially horizontal. The statement indicates that the sedimentary layers in the area, specifically the Navajo Sandstone, Temple Cap, and Kayenta formations, exhibit parallel boundaries with the topographic contours. This characteristic suggests that the sedimentary layers are essentially horizontal.
In geology, the principle of original horizontality states that sedimentary layers are initially deposited in horizontal or nearly horizontal layers. This principle is based on the understanding that sediments accumulate in response to gravity, settling on top of previously deposited layers. Over time, these layers can become lithified and form sedimentary rocks.
In the given scenario, the parallel boundaries between the Navajo Sandstone, Temple Cap, and Kayenta formations and the topographic contours indicate that these sedimentary layers were originally deposited horizontally or with minimal inclination. The fact that the boundaries follow the contours suggests that any subsequent tilting or deformation of the layers has been minimal or absent in this specific area.
It is important to note that while the sedimentary layers in this particular location exhibit horizontal characteristics, this does not imply that sedimentary layers are always horizontal on a larger scale or across different geological regions. Geological processes such as tectonic forces, folding, faulting, and erosion can cause significant deformation and tilting of sedimentary layers over time. However, in the given context, the evidence suggests that the sedimentary layers are essentially horizontal based on the parallel boundaries observed between the formations and the topographic contours.
for more questions on sedimentary layers
https://brainly.com/question/30174978
#SPJ8
Continental crust is typically 35 km thick, but may be up to ________ thick under mountain ranges. Group of answer choices 70 km 400 km 200 km 40 km
Continental crust is typically 35 km thick, but may be up to 70 km thick under mountain ranges.
Continental crust is the thick outer layer of the Earth's lithosphere that forms the continents and their adjacent shelves beneath the oceans. It is primarily composed of granitic rocks, which are lighter in color and have a lower density compared to the basaltic rocks found in oceanic crust.
Continental crust has an average thickness of around 30-50 kilometers. However, it can reach up to 70 kilometers in mountainous regions.
Continental crust forms through various geological processes, including the accretion of volcanic arcs, collision of tectonic plates, and the gradual growth and merging of smaller landmasses. These processes occur over long geological timescales.
Learn more about continental crust here:
https://brainly.com/question/30472444
#SPJ4
The given question is not properly written. Hence, the proper question is:
"Continental crust is typically 35 km thick, but may be up to ________ thick under mountain ranges.
Group of answer choices
70 km 400 km 200 km 40 km"______ water moves slowly ______ through the South Atlantic ocean basins west of the Mid-Atlantic Ridge, but the ______ water sinks and moves ______ along the east side of the Atlantic.
Antarctic Bottom Water and North Atlantic Deep Water are two major water masses in the Southern and Northern Hemisphere respectively. The Antarctic bottom water (AABW) is formed as a result of the cooling and freezing of sea ice around Antarctica.
This process releases salt, which makes the seawater more dense, and it sinks down to the bottom of the ocean. The AABW slowly moves northward through the South Atlantic Ocean basins to mix with the warmer and lighter water masses. This process is called the global thermohaline circulation. The AABW carries a large amount of dissolved carbon dioxide, making it an essential factor in regulating the Earth's climate. North Atlantic Deep Water (NADW) is formed in the northern Atlantic when warm water from the Gulf Stream reaches the northern region, and it cools and loses heat to the atmosphere.
The seawater becomes denser and sinks down to the bottom of the ocean. The NADW is transported southward along the eastern side of the Atlantic Ocean basin, and it mixes with other water masses along the way. The NADW has a lower salt content than AABW, but it carries a significant amount of nutrients that are essential for marine life.In summary, the AABW moves northward slowly through the South Atlantic Ocean basins west of the Mid-Atlantic Ridge, while the NADW sinks and moves southward along the eastern side of the Atlantic. The two water masses play a critical role in regulating the Earth's climate and sustaining marine life.
Know more about AABW here:
https://brainly.com/question/30430344
#SPJ11
Transparency Group of answer choices produces a photic layer that normally is 2000 m (6600 ft.) deep. produces a heat loading at the surface of water bodies. is greater in land than water. refers to the fact that land is opaque and water is transparent.
Transparency refers to the fact that water is transparent, allowing light to penetrate and creating a photic layer that is normally 2000 meters (6600 feet) deep.
Transparency is a characteristic of water that allows light to pass through it, unlike land which is generally opaque. This transparency enables light to penetrate into the water column, creating a photic layer.
The photic layer is the uppermost layer of water where sufficient light is available for photosynthesis to occur. Typically, this layer extends to a depth of about 2000 meters (6600 feet), although it can vary depending on factors such as water clarity and the presence of suspended particles.
Transparency plays a vital role in supporting marine ecosystems as it allows sunlight to reach underwater plants and algae, which form the base of the food chain. It also contributes to the visual clarity of water bodies, allowing for clearer visibility underwater.
To learn more about ecosystems , click here:
brainly.com/question/31459119
#SPJ11
The ultimate energy source for most wind is ________ because heating of the Earth's surface generates unequal
Because heating of the Earth's surface creates uneven amounts of energy, solar radiation is the ultimate energy source for most wind.
Actually, wind energy is a byproduct of the sun. The wind is the result of the unequal heating of the atmosphere by the sun, the uneven surfaces of the earth (mountains and valleys), and the planet's rotation around the sun.
The wind is caused by the sun's uneven heating of the earth's surface. The varied types of land and water that make up the earth's surface lead it to absorb the sun's heat at various rates.
Therefore, due to the uneven heating of the Earth's surface, solar radiation is the primary source of energy for the majority of wind.
To know more about wind energy, visit:
https://brainly.com/question/26117202
#SPJ4
The star 51 Pegasi has about the same mass and luminosity as our Sun and is orbited by a planet with an orbital period of 4.23 days and mass estimated to be 0.6 times the mass of Jupiter. Part APart complete Use Kepler's third law to calculate the planet's average distance (semimajor axis) from its star. (Hint: Because the mass of 51 Pegasi is about the same as the mass of our Sun, you can use Kepler’s third law in its original form, p2=a3.) Express your answer in astronomical units using three significant figures. a = 5.12×10−2 AU Previous Answers Correct Part B Suppose the planet reflects 15 % of the incoming sunlight. Calculate its "no greenhouse" average temperature. How does this temperature compare to that of Earth? Express your answer in kelvins using three significant figures
Part AKepler's third law states that the square of the period of revolution of a planet around its star is proportional to the cube of its semimajor axis.
Therefore, P² = a³ where P is the period and a is the semimajor axis.The mass of the planet is estimated to be 0.6 times the mass of Jupiter which is about 1.89 × 10²⁷ kg. Using Kepler's third law, the semimajor axis of the planet is;a³ = P²a = (P²)¹/³ = [(4.23 days)²]¹/³ = 5.12×10−2 AUThe average distance of the planet from its star is 5.12×10−2 AU.Part BThe planet reflects 15% of the incoming sunlight.
The "no greenhouse" average temperature of the planet is given by;T = [(1 - A)S/4σ]¹/⁴where A is the albedo of the planet (fraction of incoming radiation that it reflects), S is the solar constant (amount of radiation per unit area that falls on a surface perpendicular to the Sun's rays at Earth's mean distance from the Sun), and σ is the Stefan-Boltzmann constant (5.67 × 10⁻⁸ W/m²K⁴).
Substituting the given values, we get;T = [(1 - 0.15)(1361 W/m²)/4(5.67 × 10⁻⁸ W/m²K⁴)]¹/⁴ = 977 KThe "no greenhouse" average temperature of the planet is 977 K (kelvins).Comparing with Earth's temperature of 288 K (kelvins), the planet's temperature is significantly higher.
To know more about semimajor visit :
https://brainly.com/question/29415696
#SPJ11
Study this model of Earth, the Moon, and the Sun. In this model, number 1 represents and number 2 represents and number 3 represents
In the given model of Earth, the Moon, and the Sun, number 1 represents the Sun, number 2 represents the Earth, and number 3 represents the Moon.
The Sun, represented by number 1, is the central star of our solar system. It is the primary source of light, heat, and energy for Earth and other celestial bodies. The Sun's immense gravitational pull keeps all the planets, including Earth, in their respective orbits.
Number 2 represents Earth, our home planet. Earth is the third planet from the Sun and is known for its diverse ecosystems and ability to support life. It orbits the Sun in an elliptical path, and its rotation on its axis gives rise to day and night cycles. Earth's atmosphere, water, and land provide a habitable environment for various forms of life.
Number 3 represents the Moon, Earth's only natural satellite. The Moon orbits around Earth, influenced by Earth's gravitational force. It reflects the Sun's light, leading to the phases of the Moon that we observe from Earth. The Moon also affects Earth's tides through its gravitational interaction with the oceans.
In summary, the model shows the Sun (1) as the central star, Earth (2) as the third planet orbiting around it, and the Moon (3) as Earth's natural satellite orbiting around Earth.
Learn more about elliptical path here:
https://brainly.com/question/14433521
#SPJ11
The most abundant kind of volcanic rock, which underlies the ocean basins and comprises the Hawaiian Islands is
The most abundant kind of volcanic rock, which underlies the ocean basins and comprises the Hawaiian Islands is basalt.
Basalt is a fine-grained, dark-colored igneous rock made primarily of the minerals plag-ioclase and pyrox-ene. It typically manifests itself as an extru-sive rock, like a lava flow, but it can also take the shape of a tiny intru-sive body, like an igneous or a thin sill.
More of the Earth's surface is covered with basalt than by any other kind of rock. Basalt forms the majority of the ocean basin floor. Several percent of the Earth's land area is underlain by lava flows and flood basalts, despite the fact that basalt is significantly less prevalent on continents. A very significant rock is basalt.
To know more about basalt, click here:
https://brainly.com/question/32228941
#SPJ4
The seafloor east of Papua New Guinea has small basins, trenches, and island arcs. True or False: This area is considered one of the least complex areas of oceanic crust.
False. The seafloor east of Papua New Guinea is not considered one of the least complex areas of oceanic crust.
The statement is false. The seafloor east of Papua New Guinea is known for its geological complexity rather than being one of the least complex areas of oceanic crust. This region is characterized by the presence of small basins, trenches, and island arcs, which indicate active tectonic processes and the interaction of several tectonic plates.
The presence of small basins suggests the occurrence of localized subsidence and sedimentation processes. Trenches, such as the New Britain Trench, are evidence of subduction zones where one tectonic plate is forced beneath another. Island arcs, such as the Bismarck Archipelago, are chains of volcanic islands that form as a result of volcanic activity at subduction zones.
Overall, the seafloor east of Papua New Guinea exhibits significant geological activity and is considered a region of high tectonic complexity rather than being one of the least complex areas of oceanic crust.
To learn more about oceanic crust, click here:
brainly.com/question/30732874
#SPJ11
The principle of original horizontality means that sedimentary rocks have not been Multiple Choice lithified. eroded. metamorphosed. folded.
The principle of original horizontality states that sedimentary rocks have not been folded.
The principle of original horizontality is a fundamental concept in geology. It states that sedimentary rocks, which are formed from layers of sediment over time, were originally deposited in horizontal or nearly horizontal layers. This principle suggests that if we observe sedimentary rocks that are now folded or tilted, it is an indication that some geological forces, such as tectonic activity, have acted upon them after their formation. Therefore, the correct choice in this multiple-choice question is "folded." This principle helps geologists interpret the history and past geological events in a given area by studying the relationships between rock layers.
Learn more about sedimentary rocks here : brainly.com/question/29771190
#SPJ11
Volcanism at Yellowstone has been attributed to motion of North America over a mantle plume. The record of this hotspot/mantle plume volcanism:
Volcanism at Yellowstone has been attributed to motion of North America over a mantle plume.
The record of this hotspot/mantle plume volcanism has created a long-term record of basaltic lava flows, large explosive eruptions of rhyolite lava and ash, and giant caldera-forming eruptions that have been active for more than 17 million years.
The plate tectonic setting of the Yellowstone volcano lies on the eastern edge of the North American Plate. However, the area is widely known for its volcanic and geothermal activity, which has been found to have a connection with the hot spot beneath the Earth's surface. This hot spot has generated vast amounts of magma, which has given rise to the eruptions that characterize the Yellowstone Volcano.
The record of this hotspot/mantle plume volcanism is extensive, with over 200 individual flows of basaltic lava across the Snake River Plain. Several of these have been produced by large explosive eruptions of rhyolite lava and ash, while others have created giant caldera-forming eruptions that have been active for more than 17 million years.
Learn more about Volcanism Visit: brainly.com/question/1156480
#SPJ11
Tufa is a variety of limestone formed when carbonate minerals precipitate out of ambient temperature water. Tufa can be found in __. a. Santa Monica beach. b. Central valley of California.c. Mono Lake State Natural Reserve.d. all of above.e. none of above.
Tufa is a variety of limestone formed when carbonate minerals precipitate out of ambient temperature water. Tufa can be found in all of the above. The correct option is d.
Santa Monica Beach, the Central Valley of California, and the Mono Lake State Natural Reserve are all places where tuff can be found. In regions with carbonate-rich water sources, such as springs or lakes tufa formations can be found. Over time, these carbonate minerals precipitate out of the water and gather, creating the porous and frequently distinctive structures of tufa.
Due to its proximity to the Pacific Ocean, parts of the Santa Monica beach may contain tufa formations. There are places where tufa can be found in California's Central Valley which is well known for its varied geological features. A well-liked vacation spot for nature lovers and photographers, Mono Lake is situated in California's Eastern Sierra region and is well known for its extensive tufa formations.
Learn more about Tufa at:
brainly.com/question/31596612
#SPJ4
As sediment is buried by material above it, compaction starts to occur. Identify some of the effects of this compaction on the sediment. Multiple select question. Excess water is expelled. Clasts get pushed together. Clay particle alignment becomes randomized. The sediment becomes more dense packed. Pore space is increased.
Compaction is one of the processes that occur in sedimentary rocks. The correct options are: A. Excess water is expelled B. Clasts get pushed together D. The sediment becomes more densely packed.
Sedimentary rocks are formed through the accumulation of sediment. The sediments are then compacted by overlying material, which reduces the porosity and increases the density. Excess water is expelled, clasts get pushed together, and the sediment becomes more densely packed.
The compaction process causes the sediment to become denser, resulting in reduced porosity. Water is expelled from the sediment as it is compacted. The particles are pushed together and become more densely packed. As a result of the compaction process, the clasts become more rounded and the clay particle alignment becomes more random.
Learn more about sedimentary Visit: brainly.com/question/29240254
#SPJ11
