Pewter is a solidified solution of tin and lead or tin and zinc. In both cases, tin is the main component. Which metal would you classify as the solute in each type of pewter?

Answers

Answer 1
Low quality pewter is tin, lead and a small amount of copper. In higher quality pewter, antimony or bismuth is used instead of lead. Pewter alloyed with antimony and bismuth can be polished to a bright, tarnish free finish. The alloying metals lower the melting temperature of tin, making it possible to cast molten alloy into detailed shapes.

Related Questions

20. What is the pOH for a solution with a pH of 5.02?

Answers

To find the pOH of a solution, we can use the formula:

pH + pOH = 14

If the pH of the solution is 5.02, then:

pH + pOH = 14
5.02 + pOH = 14
pOH = 14 - 5.02
pOH = 8.98

Therefore, the pOH of the solution is 8.98.

explain the relationship (linear or exponential) between rate and concentration including what order the iodate ion would be in.

CONCENTRATIONS
EXP. 1: 0.020
EXP 2: 0.019
EXP 3: 0.017
EXP 4: 0.016
EXP 5: 0.014
EXP 6: 0.013
EXP 7: 0.011
EXP 8: 0.01
EXP 9: 8.6x10^-3
EXP 10: 7.1x10^-3
EXP 11: 5.7x10^-3
EXP 12: 4.3x10^-3

RATE (s^-1):
EXP 1: 0.283
EXP 2: 0.1972
EXP 3: 0.2353
EXP 4: 0.2033
EXP 5: 0.1701
EXP 6: 0.133
EXP 7: 0.10
EXP 8: 0.1234
EXP 9: 0.077
EXP 10: 0.07380
EXP 11: 0.05102
EXP 12: 0.03883

By looking at the reaction mechanism, propose a Rate Law (WITHOUT the value of K). Explain the exponents for each reactant. Also, how does the rate law proposed compared to the relationship between rate and iodate concentration observed in the Rate law question?

Discuss, with respect to collision theory, the changes in the rates result from the changing concentrations of the iodate ion. What would you predict if we repeated these reactions at higher temperatures? Explain using collision theory.

Answers

Based on the given data, the relationship between rate and concentration is exponential.

A proposed rate law for the reaction based on the given data is:

Rate = k[IO3⁻]²[H+]

What is the collision theory?

Collision theory suggests that the rate of a chemical reaction is proportional to the frequency and energy of collisions between the reactant molecules.

As the concentration of iodate ions decreases, the frequency of collisions between reactant molecules decreases, which leads to a decrease in the rate of the reaction.

At higher temperatures, the kinetic energy of the reactant molecules increases, which increases the frequency and energy of collisions between reactant molecules.

Learn  more about collision theory at: https://brainly.com/question/20628781

#SPJ1

How much heat energy is absorbed when 132 g of ice melts

Answers

Explanation:

To calculate how much heat energy is absorbed when 132 g of ice melts, we need to know the heat of fusion for ice, which is the energy required to change the ice from solid to liquid without changing its temperature. The heat of fusion of ice is 334 joules per gram. Using this information, we can calculate how much heat energy is absorbed when the ice melts:

q = mass × heat of fusion

q = 132 g × 334 J/g

q = 44,088 J

So, 44,088 joules of heat energy are absorbed when 132 g of ice melts.

The one above me is correct

Given that the initial rate constant is 0.0120s−1 at an initial temperature of 29 ∘C , what would the rate constant be at a temperature of 160 ∘C for the same reaction described in Part A?

Answers

To calculate the rate constant at a different temperature for the same reaction, we can use the Arrhenius equation:

k2 = A*e^(-Ea/R*(1/T2 - 1/T1))

where k2 is the rate constant at the new temperature, A is the frequency factor (which is assumed to be constant), Ea is the activation energy for the reaction, R is the gas constant (8.314 J/mol*K), T2 is the new temperature in Kelvin, and T1 is the initial temperature in Kelvin.

To solve this equation, we need to know the activation energy and frequency factor for the reaction. Do you have this information available?

Can someone please help me with this? Thank you for your help!

Answers

The correct answer for 1 is that the formation of liquid droplets above the solution is not an indication that a chemical reaction has occurred, which is option a. The formation of the silvery metal is an example of which of the following indicators of precipitate formation which is in option c .

The formation of liquid droplets above the solution is not an indication of a chemical reaction because it is likely caused by a physical process rather than a chemical one. As the liquid in the flask evaporates due to the warmth of the sunlight, water vapor rises and then cools as it reaches the cooler surface of the glass. This causes it to condense back into liquid droplets above the solution. This process is called condensation and is a physical change that occurs due to changes in temperature and pressure.

Learn more about the chemical reaction here.

https://brainly.com/question/24560689

#SPJ1

NEED HELP ON QUESTION ASAP! !

If answer is correct I'll rate you five stars a thanks and maybe even brainliest!


Please can you explain what this paragraph is trying to say. Also what does it mean in the sentence 'the difference in charge across the battery provides push for current' and what is the difference in charge.




Here's paragraph I need to have a simple definition of:



A high waterfall is also like a large voltage. It will transfer a lot of energy to the water (charge), making the river flow very fast (a large current) the difference in height makes the river flow. In a circuit , the difference in charge across battery provides push for the current.

Answers

A waterfall is a river's water falling rapidly to the ground. It is created in a river's upper course where there are high mountains.

Thus, Many waterfalls are transient and only occur during rainstorms because of their location in the landscape, where they are often over bedrock and fed by a small contributing region.

 For general knowledge, we are listing the "Top 10 Highest Waterfalls in India" here. The Kunchikal Falls are the second-highest waterfall in Asia and the highest in all of India.

The waterfall, which is close to Agumbe in Karnataka's Shimoga district, has a height of 1,493 feet. The Varahi River creates the biggest waterfall. The sole permanent rain forest research is located in Agumbe Valley, one of India's most heavily rained-on regions.

Thus, A waterfall is a river's water falling rapidly to the ground. It is created in a river's upper course where there are high mountains.

Learn more about Waterfall, refer to the link:

https://brainly.com/question/30309599

#SPJ1

Select the correct answer.
A substance is followed by the symbol (1) in a chemical equation. What does the symbol represent?
OA. The substance has the least molecules in the equation.
OB. The substance is in the liquid state.
O c.
The substance is produced last in the reaction.
O D.
The substance is dissolved in a liquid solution.
O E. The substance is lost at the end of the reaction.

Answers

The symbol l represents the substance is in the liquid state. The correct option is B.

The symbol (l) in a chemical equation indicates that the substance is in the liquid state.

This is important to know because the physical state of a substance can affect its properties and how it behaves in a chemical reaction.

For example, a liquid may have a different density or viscosity than a solid or gas, and this can impact how quickly it reacts with other substances or how it mixes with other liquids.

Therefore, including the (l) symbol in a chemical equation can provide important information about the state of the substances involved. The correct option is B.

For more details regarding chemical reaction, visit:

https://brainly.com/question/29762834

#SPJ1

what pressure would 1.75 L of disulfur monoxide gas have if it occupied a volume of 16.60 L at 1 atm?​

Answers

Okay, let's solve this step-by-step:

* We are given that the initial volume of the gas is 1.75 L at 1 atm pressure

* We want to know the pressure if the volume increases to 16.60 L

* According to Boyle's Law: Pressure x Volume = Constant

* Since the initial pressure is 1 atm and volume is 1.75 L, the constant is:

1 atm x 1.75 L = 1.75 atm*L

* When the volume increases to 16.60 L, plugging into Boyle's Law:

P x 16.60 L = 1.75 atm*L

* Solving for P (pressure):

P = 1.75 atm*L / 16.60 L

P = 0.105 atm

Therefore, the pressure of the 1.75 L of disulfur monoxide gas if it occupied a volume of 16.60 L would be 0.105 atm.

Acids other than HBr can add to alkenes. Based on the reaction with HBr, draw products for the following reactions.

Answers

The products of reaction are 2-iodo-2-methyl propane and 2-chloro-2-methyl propane.

Alkenes exhibit wide range of electrophilic addition reactions. Addition of hydrogen halides such as hydrogen bromide and hydrogen chloride is an example of electrophilic addition reactions of alkenes. The general trend of hydrogen halide is given as: HI >HBr> HCl.

In the electrophilic addition, the initial step is to attack an electrophile on the carbon-carbon double bond, which exerts a set of electrons. This step is known as the deprotonation step. This forms a carbocation.

In the next step, the halide will get attached to the carbocation, which results in original hydrogen bonds.

Learn more about Electrophilic addition, here:

https://brainly.com/question/28348492

#SPJ1

A sample of an unknown compound is vaporized at 160 c . The gas produced has a volume of 2330 ml at a pressure of 1.00 atm ,and it weighs 2.10 g
Round answer to 3 significants digits

Answers

The molar mass is 3230.8 g/mol

How to determine the value

First, we need to know that the formula for the general gas law  is represented as;

PV = nRT

such that the parameters are;

P is the pressureV is the volumen is the number of molesR is the gas constantT is the temperature

Substitute the values

1 × 2.33 = n × 8.314 × 433.15

Multiply the values, we get;

n = 2.33/ 8.314 × 433.15

Divide the values

n = 6.5 × 10⁻⁴ moles

But, number of moles = mass/molar mass

Molar mass = 2.10/ 6.5 × 10⁻⁴

Molar mass = 3230.8 g/mol

Learn about ideal gas law at: https://brainly.com/question/25290815

#SPJ1

BaS(0) +202(g) = BaSO4 Effects of increasing Oxygen on the amount of barium sulphate

Answers

Increasing the amount of oxygen in the reaction would result in an increased yield of barium sulfate, as long as there is an adequate supply of barium sulfide.

In the given chemical equation, the reaction between barium sulfide (BaS) and oxygen gas (O2) produces barium sulfate (BaSO4).

When the amount of oxygen is increased in the reaction, it would favor the production of more barium sulfate. This is because oxygen acts as a reactant in the formation of barium sulfate. By increasing the concentration or availability of oxygen, more oxygen molecules will be available to react with the barium sulfide. The increase in oxygen will provide more oxygen atoms for the formation of sulfate ions (SO4^2-) from the sulfide ions (S^2-) in barium sulfide. Consequently, more barium sulfate will be produced in the reaction. Therefore, increasing the amount of oxygen in the reaction would result in an increased yield of barium sulfate, as long as there is an adequate supply of barium sulfide.

for more questions on oxygen
https://brainly.com/question/32160368
#SPJ11

Draw the product of condensation to form a peptide bond. Identify the new peptide bond.

Answers

Covalent bonds between two amino acids are known as peptide bonds. Proteins are large chains of amino acids that are created by living things using peptide bonds.

Thus, In addition to providing structural support, initiating significant reactions, and identifying chemicals in the environment, proteins have a variety of other activities.

Therefore, the majority of biological responses are based on peptide bonds.

 Dehydration process results in the formation of a peptide bond. As can be seen in the figure below, when two hydrogens and an oxygen are taken out of the molecules, two amino acids can bind together.

Thus, Covalent bonds between two amino acids are known as peptide bonds. Proteins are large chains of amino acids that are created by living things using peptide bonds.

Learn more about Peptide bonds, refer to the link:

https://brainly.com/question/31815456

#SPJ1

hello, can you help me identify the name of these 4 molecules as well as the structural formula and the skeletal formula? thank you

Answers

Answer:1. metyletevinyl

4. (Z)-3-hydroxypropenal

Explanation:

The same amount of nitrogen gas is in both containers. The pressure in container A is

Answers

The pressure in container A depends on various factors, such as the volume of the container, the temperature of the gas, and the number of gas molecules present. However, without specific values or conditions provided, it is difficult to provide an exact answer.

In general, the pressure of a gas is directly proportional to the number of gas molecules present and the temperature, while inversely proportional to the volume of the container.

If the volume, temperature, and number of nitrogen gas molecules are the same in both containers, then the pressure in container A would be the same as the pressure in the other container.

It's important to note that pressure is typically measured in units such as pascals (Pa) or atmospheres (atm), and specific values would be needed to calculate the exact pressure in container A.

For more such questions on temperature

https://brainly.com/question/4735135

#SPJ11

How many moles of NHs, at STP, will react with 5.3 L O2 to form NOz and water?

Answers

The concept molar volume is used here to determine the moles of NH₃ needed. At 273 K, and 1 atm, 1 mole of any gas behaving ideally occupies a volume of 22.414 L. This is the molar volume at STP.

The volume occupied by one mole of a substance at a given temperature and pressure is defined as the molar volume at that temperature and pressure.

The equation connecting the volume of the sample of gas and the number of moles at STP is given as:

No: of moles = V₀ in L / 22.414

So here the volume = 5.3 L

Then number of moles is:

n = 5.3 / 22.414 = 0.236

To know more about molar volume, visit;

https://brainly.com/question/4172228

#SPJ1

Which of the following statements is not considered need for life to exist on another planet?

There should be an acceptable temperature tang for molecule to move

There needs to be a source for minerals and other nutrients

The atmosphere should be dense enough to not maintain warmth but also shield from solar radiation

The should be a reliable source of energy

Plants will be need to present to perform photosynthesis

Water needs to be in a liquid form for cells to utilize it

Answers

The most important parameter for earth like life is the presence of liquid water, which directly depends on pressure and temperature. Plants will be need to present to perform photosynthesis is not an essential condition. The correct option is E.

We need water, shelter, a power source, food, and unlike on earth, you need oxygen. No other planets in our solar system can support life. To get oxygen you have to have billions of plants and need suitable temperature for plants.

There is no life on earth that can survive without water. The planet must have a nitrogen, oxygen atmosphere without any gases that could be toxic to humans.

Thus the correct option is E.

To know more about life on earth, visit;

https://brainly.com/question/807910

#SPJ1

NEED HELP ASAP PLEASEEE

Carbon has the highest melting point (3620°C) of any element and a specific heat of 0.7099 J/gºC. Tungsten has a specific heat of 0.1320 J/gºC. An 11.2g sample of carbon is heated to its melting point and allowed to radiate heat to a 165.3g sample of tungsten. The initial temperature of the tungsten is 31.0°C. What will be the final temperature of the tungsten?

Please show it step by step

Answers

Answer:

c. 11.2

Explanation:

Which characteristic of a livable exoplanet does the image below support?

A. The planet needs have an acceptable surface composition
B. The planets needs to have reliable source of energy
C. The planet needs to have liquid water available
D. The planet needs to have an atmosphere to retain heat and reflect solar radiation

Answers

The image below shows a exoplanet with a blue hue, which is indicative of the presence of liquid water on its surface. This characteristic supports option C, which states that a livable exoplanet needs to have liquid water available.

The correct answer is option C.

Water is an essential component of life as we know it, and its presence is a key indicator of a planet's potential habitability. Without liquid water, it would be impossible for life to survive on a planet. However, it is important to note that liquid water alone is not sufficient for a planet to be considered livable. The planet also needs to have an acceptable surface composition, a reliable source of energy, and an atmosphere to retain heat and reflect solar radiation. Therefore, while the presence of liquid water on the exoplanet in the image is a positive sign, further investigation would be required to determine if it meets all the other criteria for being a livable exoplanet.

The correct answer is option C.

For more such questions on exoplanet

https://brainly.com/question/28957717

#SPJ11

Can someone please do this for me? Thank you!!

Answers

Answer:

1.) F 2.) F 3.) T 4.) T 5.) T 6.) F 7.) F 8.) F

Explanation:

Determine whether the following five molecules are polar or nonpolar and explain your answer:
a) Beryllium chloride b) Hydrogen sulphide c) Sulphur trioxide d) Water e) Trichloromethane

Answers

The following are categorized into polar or nonpolar molecules:

a) Beryllium chloride - nonpolar b) Hydrogen sulphide - polar c) Sulphur trioxide - nonpolar d) Water - polar e) Trichloromethane - polar

How to determine polar or nonpolar?

a) Beryllium chloride (BeCl₂) is a nonpolar molecule. The Be-Cl bond is polar due to the electronegativity difference between beryllium and chlorine, but the molecule is linear with the two polar bonds pointing in opposite directions, resulting in a net dipole moment of zero.

b) Hydrogen sulphide (H₂S) is a polar molecule. The H-S bond is polar due to the electronegativity difference between hydrogen and sulfur, and the molecule has a bent shape, resulting in a net dipole moment that is not zero.

c) Sulphur trioxide (SO₃) is a nonpolar molecule. The S-O bonds are polar due to the electronegativity difference between sulfur and oxygen, but the molecule is trigonal planar with the three polar bonds pointing in different directions, resulting in a net dipole moment of zero.

d) Water (H₂O) is a polar molecule. The H-O bond is polar due to the electronegativity difference between hydrogen and oxygen, and the molecule has a bent shape, resulting in a net dipole moment that is not zero.

e) Trichloromethane (CHCl₃) is a polar molecule. The C-Cl bonds are polar due to the electronegativity difference between carbon and chlorine, and the molecule has a tetrahedral shape, resulting in a net dipole moment that is not zero.

Find out more on polar or nonpolar here: https://brainly.com/question/17118815

#SPJ1

Balance _O2+_C4H9OH to _CO2+H2O

Answers

The balanced equation is:

[tex]2 C_4H_9OH + 13 O_2 = 8 CO_2 + 10 H_2O[/tex]

The balanced equation for the combustion of [tex]C_4H_9OH[/tex](butanol) in the presence of oxygen ([tex]O_2[/tex]) to produce carbon dioxide ([tex]CO_2[/tex]) and water ([tex]H_2O[/tex]) is:

[tex]2 C_4H_9OH + 13 O_2 = 8 CO_2 + 10 H_2O[/tex]

In this equation, the coefficients are balanced such that the number of atoms of each element is the same on both sides of the equation. There are 8 carbon atoms, 18 hydrogen atoms, and 26 oxygen atoms on both sides of the equation.

Therefore, to balance the equation, the coefficients are:

2 for [tex]C_4H_9OH[/tex] to balance the carbon and hydrogen atoms on the left side

13 for [tex]O_2[/tex] to balance the oxygen atoms on both sides

8 for [tex]CO_2[/tex] and 10 for [tex]H_2O[/tex] to balance the carbon and hydrogen atoms on the right side

The balanced equation is:

[tex]2 C_4H_9OH + 13 O_2 = 8 CO_2 + 10 H_2O[/tex]

For more question on balanced equation click on

https://brainly.com/question/11904811

#SPJ11

What did Henri Matisse describe as the modern concepts of artistic expression in his Notes of a Painter (1908)?

Answers

Henri Matisse talked about new ideas in creative expression that he thought were emerging at the moment as well as his vision for modern art.

The use of color and shape to convey emotion, according to Matisse, should take the place of the conventional representational approach that sought to mimic the real world. He held that artists should be allowed the freedom to interpret the world in light of their personal experiences and that contemporary art was really about individual expression.

Matisse believed that contemporary artists should aim for simplicity and clarity in their work, distilling the natural world down to its most basic components. To achieve a sense of coherence in entire composition, he emphasised on significance of balance and harmony in the use of color and shape. Overall, "Notes of a Painter" contributed to the development of the modernist movement in art, which emphasised the value of creativity and individual expression

Read more about Henri Matisse on:

https://brainly.com/question/27456449

#SPJ1

A sample of water weighing 523g is cooled by 23C. Calculate the q value for this process.

Answers

Answer:

The q value for this process is -241.69 kJ.

Explanation:

To calculate the q value, we need to use the equation:

q = m * c * ΔT

where:

q is the heat energy absorbed or released,

m is the mass of the substance,

c is the specific heat capacity of the substance,

ΔT is the change in temperature.

In this case, the mass of the water (m) is given as 0.523 kg, the change in temperature (ΔT) is 23°C, and the specific heat capacity of water (c) is approximately 4.18 kJ/kg°C.

Substituting the values into the equation:

q = 0.523 kg * 4.18 kJ/kg°C * 23°C

q = 5.46 kJ * 23°C

q = -125.58 kJ

The negative sign indicates that heat is being released from the water as it cools. Therefore, the q value for this process is -125.58 kJ or approximately -241.69 kJ (rounded to two decimal places).

1 answer
.....................................

Answers

Answer:

Signal noise will reduce the information in the transmitted signal.

Explanation:

Signal noise is the most likely factor that will reduce the information in a transmitted signal because:

Signal noise is any unwanted interference that degrades a communication signal.Signal noise can interfere with both analog and digital signals, and it can cause distortion of the signal, which can lead to errors in the information that is being transmitted.

If 2.5 moles of CO2 is made from the reaction, how many moles of h2o is produced?

Answers

Answer:

The balanced chemical equation for the reaction of CO2 and H2 to produce H2O and CO is:

CO2 + 4H2 -> CH4 + 2H2O

From the equation, we can see that for every 1 mole of CO2 reacted, 2 moles of H2O are produced. Therefore, if 2.5 moles of CO2 are produced, the number of moles of H2O produced would be:

2.5 moles CO2 * (2 moles H2O / 1 mole CO2) = 5 moles H2O

Therefore, 5 moles of H2O would be produced when 2.5 moles of CO2 is produced.

if the body is moving with uniform acceleration then, eng of motion are given as s = u+v/2+t​

Answers

Yes, s = u+v/2+t, where s is the displacement, u is the beginning velocity, v is the end velocity, and t is the time required, is the equation of motion for a body travelling with uniform acceleration.

The basic law of motion, which states that a body's rate of change in displacement is directly proportional to its velocity, provides the basis for this equation. The equation of motion for a body travelling with constant acceleration, s = ut + 1/2at2, may be used to derive it.

The equation of motion for a body travelling with uniform acceleration is given by replacing the value of an as (v-u)/t and getting s = u+v/2+t. This formula is only accurate when the body's acceleration is constant and uniform.

Learn more about  acceleration  at:

https://brainly.com/question/12550364

#SPJ1

Question 2
What factors decrease the transfer of thermal energy?

Answers

Answer:

Hair on our head reduces heat loss because air is trapped between individual hairs. To reduce heat transfers from our bodies, we can wear insulating clothing - such as gloves, scarves, hats and thermal socks - in cold weather. The more layers we wear, the more air can be trapped and the warmer we will remain.

Explanation:

have a nice day.

How does carbon enter the soil? O used to make shells and bones O dissolves from the atmosphere O decomposition of plant and animal material O photosynthesis converts it into sugars​

Answers

Photosynthesis is a process by which plants convert light energy into chemical energy which is later used to carry out cellular activities. The carbon enter into the soil through photosynthesis. The correct option is D.

Through the process of photosynthesis, plants assimilate carbon and return some of it to the atmosphere through respiration. The carbon that remains as plant tissue is then used by animals or added to the soil as litter when plants die and decompose.

The carbon dioxide molecules are captured by the plants and are changed into organic matter. The plants keep the carbon and respire the oxygen.

Thus the correct option is D.

To know more about Photosynthesis, visit;

https://brainly.com/question/29775046

#SPJ1

Model B
Which statement best explains how the models differ?
Model A shows the formation of ions, and model B does not show the formation of ions.
Model A does not show the formation of ions, and model B shows the sharing of electrons.
Model A shows the sharing of electrons, and model B shows the formation of ions.
Model A shows the transfer of an electron, and model B shows the sharing of electrons.
Mark this and return
Save and Exit
Next
Submit

Answers

Answer:

Model A shows the formation of ions, and model B shows the sharing of electrons.

2A+2b+2c rate law for this reaction?

Answers

Rate =[tex]k[A]^2[B]^2[C]^2[/tex] with an overall reaction order of 6.

The rate law for a chemical reaction expresses the relationship between the rate of the reaction and the concentrations of the reactants. In the given reaction, 2A + 2B + 2C, the general rate law expression can be written as:

Rate =[tex]k[A]^a[B]^b[C]^c[/tex]

However, since the coefficients in the balanced chemical equation represent the stoichiometric coefficients, they can also be used as the exponents in the rate law expression. Therefore, the rate law for the given reaction would be:

Rate =[tex]k[A]^2[B]^2[C]^2[/tex]

Here, a = 2, b = 2, and c = 2 represent the exponents corresponding to the reactants A, B, and C, respectively. The overall order of the reaction is determined by adding the exponents:

Overall reaction order = a + b + c = 2 + 2 + 2 = 6

Hence, the rate law for the reaction 2A + 2B + 2C would be:

Rate =[tex]k[A]^2[B]^2[C]^2[/tex] with an overall reaction order of 6.

Know more about   rate law   here:

https://brainly.com/question/13852273

#SPJ8

Other Questions
URGENTHow has social media influenced business competition?Businesses can sell their products and services only in local markets.Businesses can use customer feedback to create new products.Businesses can sell similar products and services as others worldwide.Businesses must charge similar prices for the same products. TRUE/FALSE. A subject directory is an outline of Web sites organized by topic. T/F The 'Head of an Akkadian ruler' represents the mythological god of thunder Select the 3 PHRASES below.Choose all that apply:after the extremely long dress rehearsalBecause we live on Main Streetshooting through outerspacethe last man standing ilove youWho you have always known as Maria why is replenishing nad+ crucial to cellular metabolism? You manage a portfolio worth $9.1 million, currently all invested in equities, and believe that the market is on the verge of a big but short-lived downturn. You would move your portfolio temporarily into T-bills, but you do not want to incur the transaction costs of liquidating and reestablishing your equity position. Instead, you decide to temporarily hedge your equity holdings with E-mini S&P 500 index futures contracts. a. Should you be long or short the contracts? Long Short b. If your equity holdings are invested in a market-index fund, into how many contracts should you enter? The S&P 500 index is now at 1,132 and the contract multiplier is $250. (Round your answer to 1 decimal place.) Number of contracts c. How does your answer to (b) change if the beta of your portfolio is 0.8? (Round your answer to 1 decimal place.) Number of contracts how does the agar media used for motility testing differ from that used for your plate cultures? If the tax base of an asset is smaller than the asset's carrying value and a reversal is expected in the future: a a deferred tax liability is created b neither a deferred tax asset or liability is created c a deferred tax asset is created What is the diffraction limit of a 120-meter radio telescope observing radio waves with a wavelength of 21 centimeters? during a recession, which of these retailers would be most apt to increase sales? question 19 options: macys tiffanys jewelry wal-mart home depot neiman marcus internet2 provides a nationwide 100 gigabit-per-second network. List the sample space for rolling a fair 10-sided die. S = {1} S = {10} S = {1, 2, 3, 4, 5, 6} S = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10} behavioral patterns and values that characterize a group of consumers in a target market are called describe the consequences if multicollinearity is not satisfied. malignant tumor associated with aids; appears as bluish-red skin nodules what are 3 reasons why adnan syeds might be innocent most of the social mobility that took place in the twentieth century was a result of what is the significance of blanches directions to visit her sister "take a streetcar named desire, then transfer to one called cemeteries, and ride six blocks and get off atelysian fields"? we will start by answering some questions about the data. first, go to the data tab and choose the statistics package you wish to use and then download the dataset if you have not done so already. out of the first ten mothers in the dataset, how many gave birth to a baby whose weight was normal? out of the first ten mothers in the data set, how old was the mother who gave birth to the baby with the lowest birth weight? out of the first ten mothers who did not visit a physician during the first trimester, how many gave birth to a low birth weight baby? I need help with this. I'm stuck on this question