The concentration of salt in ocean water varies, but on average it is about 35 grams of salt per liter of water. Using this information, we can calculate the amount of salt in 1.5 L of ocean water solution as:
35 g/L * 1.5 L = 52.5 g
Therefore, there are approximately 52.5 grams of salt dissolved in 1.5 L of ocean water solution. It is important to note that the exact concentration of salt in ocean water can vary depending on factors such as location and depth, but this calculation provides a rough estimate based on average values. The compound formula for salt in this context is NaCl (sodium chloride).
After glycolysis but before the citric acid cycle,
A. glucose is split, producing two molecules of pyruvate.
B. coenzyme A is cleaved off pyruvate.
C. pyruvate is oxidized.
D. a carbon atom is added to pyruvate to make a four-carbon compound.
After the glycolysis but before the citric acid cycle , the pyruvate is oxidized. The correct option is C.
The glycolysis is the process in which the glucose is partially broken down by the cells in the enzyme reactions that do not need the oxygen. Glycolysis is one of the method that cells use to produce the energy.
During the glycolysis, glucose is split in to the two molecules of the pyruvate, and the small amount of the ATP and the NADH is produced. After the glycolysis, the pyruvate molecules are transported in the mitochondria, the pyruvate is oxidized where they undergo the series of the reactions before entering the citric acid cycle. therefore option C is correct.
To learn more about citric acid cycle here
https://brainly.com/question/29857075
#SPJ4
When gaseous Na+ and Cl− ions form gaseous NaCl ion pairs, 548 kJ/mol
of energy is released. Why, then, does NaCl occur as a solid under ordinary conditions?
When the gaseous Na+ and Cl− ions form gaseous NaCl ion pairs, 548 kJ/mol of energy is released. This is known that the energy released by combination of oppositely charged ion is called as Lattice energy.
Lattice energy is defined as the energy change upon formation of one mole of a crystalline ionic compound from its constituent ions which are assumed to initially be in the gaseous state. This energy is a measure of the cohesive forces that bind ionic solids. The lattice energy releases even more energy when gas is converted into solid. The ionic bonds are very strong due to high attractive forces holding the positively and negatively charged ions alternatively together. They are packed tightly and the crystal lattice structure is extremely hard to break. Thus at normal room temperature, Sodium chloride occur as solid.
To learn more about Lattice energy please visit:
https://brainly.com/question/4792664
#SPJ4
if heat was lost from the calorimeter while the ice was melting, how would the molar heat of fusion change?
If heat was lost from the calorimeter while the ice was melting, the measured value of the molar heat of fusion would be lower than the true value.
This is because some of the heat that is released when the ice melts would be absorbed by the surroundings (including the calorimeter and the air), instead of being used to heat up the water in the calorimeter.
The molar heat of fusion is defined as the amount of heat required to melt one mole of a substance at its melting point, with no change in temperature. It is usually determined experimentally using a calorimeter, which is an insulated container that can measure changes in temperature and heat flow.
In the experiment to measure the molar heat of fusion of ice, a known mass of ice is added to a calorimeter containing a known mass of water at a higher temperature. The heat released by the melting ice is absorbed by the water, causing it to cool down. By measuring the change in temperature of the water, the amount of heat released by the melting ice can be calculated, and from this, the molar heat of fusion can be determined.
If some of the heat released by the melting ice is lost to the surroundings, the measured value of the heat released will be lower than the true value, and hence the calculated molar heat of fusion will also be lower than the true value. To obtain a more accurate value of the molar heat of fusion, the heat loss from the calorimeter should be minimized by insulating the calorimeter and conducting the experiment in a thermally stable environment.
Learn more heat of fusion here:
https://brainly.com/question/30403515
#SPJ4
what is PaCO2 normal range
The normal range for PaCO₂ (partial pressure of carbon dioxide in arterial blood) is typically between 35 to 45 mm Hg (millimeters of mercury) or 4.7 to 6.0 kPa (kilopascals).
However, the normal range can vary slightly depending on the specific laboratory reference ranges used and the individual's age, sex, and health status. It is important to note that deviations from the normal range of PaCO₂ can be indicative of various respiratory and metabolic disorders, and therefore, interpretation of PaCO₂ results should be done in conjunction with other clinical data.
To know more about the normal range, here
brainly.com/question/30390052
#SPJ4
scba can help protect from _____, which can be caused by inhaling heated gases.
SCBA (Self-Contained Breathing Apparatus) can help protect from smoke inhalation, which can be caused by inhaling heated gases.
When a fire occurs, the heat of the flames can cause the release of toxic gases and particles, including carbon monoxide, hydrogen cyanide, and soot, which can cause respiratory problems and even death if inhaled in high concentrations.
SCBA provides a supply of clean air to firefighters and other emergency responders, allowing them to breathe safely in hazardous environments. It is an essential tool for firefighters and other rescue workers who must enter burning buildings or other dangerous situations to perform their duties.
To know more about the SCBA, here
brainly.com/question/30268256
#SPJ4
How do you write the electron configuration for Fluorine?
The electron configuration of the fluorine is :
1s² 2s² 2p⁵
The atomic number of the fluorine is 9. The fluorine is the non metallic and it is pale yellow - green element with the pungent odor. The electronic configuration of the fluorine is as follows :
The electron configuration of the fluorine = 1s² 2s² 2p⁵
The noble gas electronic configuration of fluorine = [He] 2s² 2p⁵.
The fluorine contains the 9 protons, 10 neutrons and the 9 electrons. The fluorine belongs to the group 17 and the it belongs to the period 2 in the periodic table and it is belongs to the halogen group.
To learn more about fluorine here
https://brainly.com/question/19538177
#SPJ4
Is NaOH strong or weak acid or base?
NaOH (sodium hydroxide) is a strong base.
Acids and bases are classified as strong or weak based on their ability to donate or accept protons (H+ ions) in solution. A strong acid or base completely dissociates in water to produce a high concentration of H+ or OH- ions, while a weak acid or base only partially dissociates. NaOH is a strong base because it completely dissociates in water to form Na+ and OH- ions.
The resulting solution is highly alkaline with a pH greater than 7. NaOH is commonly used in many industrial and laboratory applications as a strong base.
To know more about the NaOH, here
brainly.com/question/12855736
#SPJ4
Excess stomach acid is often treated with milk of magnesia, Mg(OH)2 or a similar substance. We would expect the pH of milk of magnesia to be approximately
Responses
A 7.7.
B 10.5.10.5.
C 14.14.
D 4.
The pH of milk of magnesia (Mg(OH)2) is approximately 10.5. Therefore, the correct answer is B.
What is Milk of Magnesia?
Milk of magnesia is a liquid suspension of magnesium hydroxide, which is an inorganic compound with the chemical formula Mg(OH)2. It is commonly used as an antacid to neutralize stomach acid and relieve indigestion, heartburn, and other gastrointestinal symptoms. Magnesium hydroxide works by reacting with the hydrochloric acid in the stomach to form magnesium chloride and water, which raises the pH of the stomach and reduces the acidity. Milk of magnesia can also be used as a laxative to relieve constipation, as it helps to draw water into the colon and soften the stool.
Its pH can be calculated based on the dissociation of the magnesium hydroxide in water:
Mg(OH)2 + H2O ⇌ Mg2+ + 2OH-
The hydroxide ion concentration, [OH-], is related to the pH by the equation:
pH = 14 - pOH
where pOH = -log[OH-].
The dissociation constant (Kw) of water is 1.0 x 10^-14 at 25°C, and the concentration of the hydroxide ions in milk of magnesia is dependent on the solubility of magnesium hydroxide in water.
At 25°C, the solubility product (Ksp) of Mg(OH)2 is 1.8 x 10^-11. The concentration of hydroxide ions in milk of magnesia can be calculated using the Ksp:
Ksp = [Mg2+][OH-]^2
Since magnesium hydroxide is a weak base, the concentration of hydroxide ions will be less than the concentration of magnesium ions in the solution.
Therefore, the pH of milk of magnesia will be greater than 7, and is typically around 10.5.
Learn more about Milk of Magnesia from given link
https://brainly.com/question/1619275
#SPJ1
The change in free energy of a chemical reaction represents
The change in free energy of a chemical reaction represents the amount of energy that is available to do useful work. It is a thermodynamic quantity that indicates the direction and extent of a chemical reaction.
If the free energy change (ΔG) is negative, the reaction is exergonic, meaning that energy is released and the reaction is spontaneous. This indicates that the products are more stable than the reactants, and the reaction will proceed in the forward direction. Conversely, if the free energy change (ΔG) is positive, the reaction is endergonic, meaning that energy is required for the reaction to occur and it is non-spontaneous. This indicates that the reactants are more stable than the products, and the reaction will proceed in the reverse direction. If the free energy change (ΔG) is zero, the reaction is at equilibrium, meaning that the forward and reverse reactions are occurring at equal rates and the concentrations of reactants and products do not change over time.
Learn more about free energy here:
https://brainly.com/question/15319033
#SPJ4
For zero order reaction, the unit of rate constant is equal to the unit of the rate of the reaction. It is sM or L⋅smol. For first order reaction, the unit of rate constant is equal to s−1 or min−1.
A zero order reaction's rate constant is measured in molL1s1. The unit of the rate constant is the same as the unit of reaction rate for zero order reactions.
Does a linear reaction have the same unit of velocity and rate constant?As a result, in the no reaction, the velocity is dependent of the reactant concentration and the units proportional rate and rate constant, which are mol/L/time, are equivalent.
What is the zero order response rate?A zero order process is a chemical process where the reaction rate is unaffected by the the amount of the reactants; that is, the rate is unaffected whether the reactant concentration rises or falls.
To know more about reaction visit:
https://brainly.com/question/28984750
#SPJ1
how a naturalist such as Darwin studies plants and animals.
Answer:
In 1831, when Darwin was just 22 years old, he set sail on a scientific expedition on a ship called the HMS Beagle. He was the naturalist on the voyage. As a naturalist, it was his job to observe and collect specimens of plants, animals, rocks, and fossils wherever the expedition went ashore.
how can you represent the composition of an ionic compound?
The composition of an ionic compound can be represented by its chemical formula, which shows the types and numbers of atoms in a unit of the compound.
Representing the composition of ionic compoundsIonic compounds are composed of positively charged ions, called cations, and negatively charged ions, called anions.
The composition of an ionic compound can be represented by its chemical formula, which shows the types and numbers of ions in a unit of the compound.
The sum of the charges on the cations and anions must be equal and opposite in order for the compound to be electrically neutral.
For example, the chemical formula for magnesium chloride, an ionic compound, is MgCl2, which shows that it is made up of one magnesium ion (Mg2+) and two chloride ions (Cl-).
More on ionic compounds can be found here: https://brainly.com/question/3222171
#SPJ1
how many moles are in 34.5 of nabro3
To determine the number of moles in 34.5 grams of NaBrO3, we need to divide the given mass by the molar mass of NaBrO3. There are 0.229 moles of NaBrO3 in 34.5 grams of NaBrO3.
The molar mass of NaBrO3 can be calculated by summing the atomic masses of one sodium (Na) atom, one bromine (Br) atom, and three oxygen (O) atoms, each multiplied by their respective subscripts in the chemical formula.
The atomic masses of Na, Br, and O are:
Na: 22.99 g/mol
Br: 79.90 g/mol
O: 16.00 g/mol
The chemical formula of NaBrO3 indicates that it contains one Na atom, one Br atom, and three O atoms. Therefore, the molar mass of NaBrO3 is:
molar mass = (1 x Na atomic mass) + (1 x Br atomic mass) + (3 x O atomic mass)
molar mass = (1 x 22.99 g/mol) + (1 x 79.90 g/mol) + (3 x 16.00 g/mol)
molar mass = 150.89 g/mol
Now we can use the molar mass to convert the mass of NaBrO3 to moles:
moles = mass / molar mass
moles = 34.5 g / 150.89 g/mol
moles = 0.229 mol.
For such more questions on Molar mass
https://brainly.com/question/21334167
#SPJ4
the general term for hidden heat absorbed or released when a substance undergoes a change in state is ______.
The general term for hidden heat absorbed or released when a substance undergoes a change in state is latent heat.
Generally, the specific latent heat of a substance is defined as the quantity of heat energy required to change the state of a unit mass of a substance. EL= ml where EL is referred as the heat transferred, in joules, m is the mass, in kilograms, and l is the latent heat in joules per kilogram. Basically, the SI unit for specific latent heat is Jkg−1
More precisely latent heat is also defined as the energy that is absorbed or released by a substance during a change in its physical state (phase) that occurs without changing its temperature.
Learn more about latent heat from the link given below.
https://brainly.com/question/28044951
#SPJ4
what makes a solvent ideal for use in a recrystallization?
The solvent ideal for the use in the recrystallization is the one in which product will be the very soluble at the high temperatures but the only slightly soluble at the room temperature or lower.
The Recrystallization process is the technique that is used to purify the solid compounds. The Solids tend to be the more soluble in the hot liquids than in the cold liquids. During the process of the recrystallization, an impure solid compound will be dissolved in the hot liquid until the solution become saturated, and then the liquid is allowed to be cool.
The ideal solvent for crystallization of the particular compound is one in which product will be the very soluble at the high temperatures . The primary consideration is that solvent should be unreactive.
To learn more about recrystallization here
https://brainly.com/question/4568753
#SPJ4
(e) as the reaction occurs at constant temperature, does the pressure inside the container increase, decrease, or remain the same? explain.(e) as the reaction occurs at constant temperature, does the pressure inside the container increase, decrease, or remain the same? explain.
This can be explained by the ideal gas law, which states that pressure is proportional to the number of gas molecules within a container at a constant temperature. Therefore, as more gas molecules are produced during the reaction, the pressure within the container will increase.
What is Gas Law?
Gas laws are a set of fundamental principles that describe the behavior of gases under different conditions of temperature, pressure, and volume. The most commonly studied gas laws are Boyle's law, Charles's law, Gay-Lussac's law, and the combined gas law. Boyle's law states that at a constant temperature, the volume of a gas is inversely proportional to its pressure. Charles's law states that at a constant pressure, the volume of a gas is directly proportional to its temperature.
Gay-Lussac's law states that at a constant volume, the pressure of a gas is directly proportional to its temperature. The combined gas law combines these three laws to relate pressure, volume, and temperature of a gas. Gas laws are important in understanding the behavior of gases in many real-world applications, such as in chemical reactions, combustion engines, and weather forecasting.
The pressure inside the container will increase as the reaction occurs. This is because the reaction between magnesium and hydrochloric acid produces hydrogen gas, which is a gas that occupies space within the container. As the amount of gas within the container increases, the pressure inside the container will also increase if the temperature is held constant.
Learn more about Gas Law from given link
https://brainly.com/question/27870704
#SPJ1
1
Question 1
The compound KB5O8·X H2O was analyzed and found to contain 24.6% of water. If the formula weight of this compound is 293.15 g/mol, what is the number of water molecules (X) in the formula? Round all atomic weights used in this problem to the hundredths place.
Question 2
A student found two unlabeled containers in the lab. Both of them had the same crystalline white appearance. The student found the labels on the floor. One of them had the name ammonium nitrite on the label, the other one said ammonium carbonate. The student analyzed the compounds and found that the two compounds had the same percent of oxygen.
Calculate the percent of oxygen in both compounds. Round all atomic weights used in this problem to the hundredths place.
3.A student ontained the following data in the lab:
mass of beaker 128.89g
mass of beaker + hydrate: 134.92g
mass of beaker + hydrate after heating: 132.14g
Calculate the percent of anhydrous compound in the beaker.
Therefore, the number of water molecules (X) in the formula is approximately 2.42 × 10²⁴. Therefore, both compounds contain the same percentage of oxygen. The percent of anhydrous compound in the beaker is 53.8%.
What is molecule?A molecule is a group of two or more atoms held together by chemical bonds. It is the smallest unit of a compound that has the chemical properties of that compound. Molecules can be made up of atoms of the same element or different elements.
Here,
Question 1:
If KB5O8·XH2O contains 24.6% of water and its formula weight is 293.15 g/mol, we can calculate the molecular weight of the water and use that to determine the value of X. The molecular weight of water is 18.015 g/mol (rounded to the hundredths place).
The mass of water in the compound is:
24.6% of 293.15 g/mol = 72.1989 g/mol
The number of moles of water is:
72.1989 g/mol ÷ 18.015 g/mol = 4.0061 mol
The number of water molecules is:
4.0061 mol × Avogadro's number = 2.42 × 10²⁴ molecules
Therefore, the number of water molecules (X) in the formula is approximately 2.42 × 10²⁴.
Question 2:
To calculate the percent of oxygen in ammonium nitrite and ammonium carbonate, we need to determine the molecular formulas of each compound.
The molecular formula of ammonium nitrite is NH4NO2, and its molecular weight is approximately 64.06 g/mol. The percent of oxygen in ammonium nitrite is:
(2 × 16.00 g/mol ÷ 64.06 g/mol) × 100% = 50.0%
The molecular formula of ammonium carbonate is (NH4)2CO3, and its molecular weight is approximately 96.09 g/mol. The percent of oxygen in ammonium carbonate is:
(3 × 16.00 g/mol ÷ 96.09 g/mol) × 100% = 50.0%
Therefore, both compounds contain the same percentage of oxygen.
Question 3:
To calculate the percent of anhydrous compound in the beaker, we need to determine the mass of water that was lost during heating.
The mass of the hydrate (including water) is:
134.92 g – 128.89 g = 6.03 g
The mass of the anhydrous compound is:
132.14 g – 128.89 g = 3.25 g
The mass of water lost during heating is:
6.03 g – 3.25 g = 2.78 g
The percent of anhydrous compound in the beaker is:
(3.25 g ÷ 6.03 g) × 100% = 53.8%
To know more about molecule,
https://brainly.com/question/21263612
#SPJ1
Wich of the following statements best describes eutectic oomposition?
A. The composition of a mixture of two components that can never dissolve in one another.
B. The composition of a mixture of two components in an exact 1 :1 ratio.
C. The composition of a mixture of two components that generates the lowest possible melting point
D. The oomposition or a mixture of two components that generates the highest possible melting point.
C. The composition of a mixture of two components that generates the lowest possible melting point.
Need help???????!!!!?????!!???
Answer:
a. 87.33 g
b. 2.30 g
Explanation:
1 mole of LiCl has 42.394 g
=> 2.060 x 42.394 = 87.33164 g or 87.33 g
1 mole of C2H2 has 26.04 g
=> 0.0885 x 26.04 = 2.30454 g or 2.30 g
What volume of 0. 900% w/v saline solution can be prepared from 0. 300 L of a 3. 00% w/v saline solution available in stock?
The volume of 0.900% w/v saline solution that can be prepared from 0.300 L of a 3.00% w/v saline solution available in stock is 1.00 L.
To prepare a 0.900% w/v saline solution from a 3.00% w/v stock solution, we need to use the dilution formula:
C₁V₁ = C₂V₂
where C₁ is the concentration of the stock solution, V₁ is the volume of the stock solution, C₂ is the concentration of the diluted solution, and V₂ is the volume of the diluted solution.
Plugging in the given values, we get:
(3.00%)(0.300 L) = (0.900%)(V₂)
Solving for V₂, we get:
V₂ = (3.00%)(0.300 L) / (0.900%)
V₂ = 1.00 L
Therefore, the volume of the 0.900% w/v saline solution that can be prepared from the 0.300 L of the 3.00% w/v stock solution is 1.00 L.
Learn more about dilution here: https://brainly.com/question/24697661.
#SPJ11
10 POINTS! At 400 k both compounds are gases. At this temperature, which compound, CH4(g) or CCl4(g), behaves more like an ideal gas? Justify your answer, including reasoning about both molecules
At the temperature of 400 K, the compound CH₄ (g) behaves more like an ideal gas than CCl₄ (g).
CH₄ behaves more like an ideal gas compared to CCL₄ because the intermolecular forces between CH₄ (g) molecules are weaker than those between CCl₄ (g) molecules. Ideal gases are characterized by weak intermolecular forces, allowing the gas molecules to move freely and independently of each other. The weaker the intermolecular forces, the more the gas behaves like an ideal gas.
CH₄ (g) is a nonpolar molecule with weak London dispersion forces between its molecules. On the other hand, CCl4(g) is also a nonpolar molecule, but it has larger and heavier atoms (chlorine) that create stronger London dispersion forces between its molecules.
Therefore, at 400 K, CH₄ (g) behaves more like an ideal gas than CCl4(g) due to its weaker intermolecular forces.
Learn more about ideal gas at https://brainly.com/question/27870704
#SPJ11
which of the following statements regarding exergonic reactions are true? multiple select question. exergonic reactions are spontaneous. exergonic reactions have a positive change in free energy. exergonic reactions release energy during product formation. the products of an exergonic reaction have a higher free energy than the reactants.
Exergonic reactions release energy during product formation.
What are exergonic reactions?Exergonic reactions are chemical reactions that release energy as they occur. In an exergonic reaction, the reactants contain more potential energy than the products, and the excess energy is released into the environment.
Exergonic reactions are important in many biological processes, such as cellular respiration, where energy is released from the breakdown of glucose to power the cell's activities.
Learn more about exergonic reactions:https://brainly.com/question/11064909
#SPJ1
Mg+2Hcl->MgCl2+H2
How much hydrogen gas is produced from 50g of Mg and 75g Hcl? Give answer in grams
The amount of hydrogen gas that is produced from 50g of Mg and 75g Hcl is: 2.08 grams of hydrogen gas is produced from 50 grams of Mg and 75 grams of HCl.
How to find the hydrogen gas?To determine how much hydrogen gas is produced from 50g of Mg and 75g of HCl, we need to use the stoichiometry of the balanced chemical equation:
Mg + 2HCl → MgCl2 + H2
First, let's calculate the number of moles of Mg and HCl:
Number of moles of Mg = 50 g / 24.31 g/mol = 2.06 mol
Number of moles of HCl = 75 g / 36.46 g/mol = 2.06 mol
The mole ratio of Mg to H2 is 1:1, so the number of moles of H2 produced is also 2.06 mol.
Finally, we can use the molar mass of hydrogen (1.008 g/mol) to convert the moles of H2 to grams:
Mass of H2 produced = 2.06 mol × 1 mol/1 mol × 1.008 g/mol = 2.08 g
Therefore, 2.08 grams of hydrogen gas is produced from 50 grams of Mg and 75 grams of HCl.
Learn more about hydrogen gas here:https://brainly.com/question/19813237
#SPJ1
identify the acid associated with each conjugate base.I–
SO42–
F–
OH–
Cl–
The acid associated with each conjugate base is HI for I⁻, H₂SO₄ for SO₄²⁻, HF for F⁻, H₂O for OH⁻, and HCl for Cl⁻.
In an acid-base reaction, an acid donates a proton (H⁺) to a base, which accepts the proton to form a conjugate acid-base pair. The conjugate base is formed when the acid donates a proton and loses its positive charge. Each conjugate base is associated with its parent acid, which is the acid that donates a proton to form the conjugate base.
I- is the conjugate base of HI (hydroiodic acid), SO₄²⁻ is the conjugate base of H₂SO₄ (sulfuric acid), F⁻ is the conjugate base of HF (hydrofluoric acid), OH⁻ is the conjugate base of H₂O (water), and Cl⁻ is the conjugate base of HCl (hydrochloric acid).
Therefore, HI is the acid associated with I⁻, H₂SO₄ is the acid associated with SO₄²⁻, HF is the acid associated with F⁻, H₂O is the acid associated with OH⁻, and HCl is the acid associated with Cl⁻.
To know more about the conjugate base, here
brainly.com/question/30225100
#SPJ4
According to Dalton's Law of Partial Pressures, the pressure of oxygen in dry air would be
The pressure of the oxygen in the air is 0.21 atm. The partial pressure of a gas is the contribution that gas makes to the total pressure when the gas is part of a mixture.
experiment 4: describe what happens when solutions of naoh and nicl2 are combined.
When nickel chloride or sodium hydroxide combine, sodium chloride and a precipitate of nickel hydroxide with a green hue are produced. Although sodium chloride is a colorless aqueous solution.
What is the purpose of nickel chloride?Powder that is golden-yellow is nickel chloride. It is employed in the production of ink and electroplating. Since nickel chloride is subject to OSHA regulation and is mentioned by the ACGIH, DOT, NIOSH, DEP, and EPA, it is listed on the Hazardous Substances List.
Where does NiCl2 come from?A nickel and chloride combination with a 1:2 ratio of nickel to chloride (in the +2 oxidized state). The chemical element NiCl2 stands for nickel(II) chloride, sometimes known as nickel chloride.
To know more about Nickel chloride visit:
https://brainly.com/question/16141868
#SPJ1
Enter the concentrations of the reactants to be used in each part of the Equilibrium Constant experiment. Reagent Part A [Fe(NO3)3] 0.100 [NaSCN) 15.000-4 Part B M 0.002 M M40.002 M Additional Materials Determination of an Equilibrium Constant Submit Answer
Part A: 0.100 M Fe(NO3)3 and 15.000-4 M NaSCN. Part B: 0.002 M M and 0.002 M M4. Additional Materials: Volumetric flasks, beakers, pipettes, thermometer, and other items as needed.
What is Thermometer?A thermometer is a device used to measure temperature. It is usually made of a metal or glass tube that contains a liquid, such as mercury, alcohol, or colored water. As the temperature of the environment increases, the liquid expands and rises up the tube. The temperature is read from the scale calibrated on the side of the tube. Thermometers may also be digital and use an electronic sensor to measure temperature.
To know more about Thermometer
https://brainly.com/question/2339046
#SPJ1
Calcuate the cocl2 molar mass
The molar mass of cocl2 also known as Phosgene is 129.91 g/mol. the molar mass (M) of a chemical compound is defined as the ratio between the mass and the amount of substance of any sample of said compound
The molar mass of CoCl2 (cobalt chloride) can be calculated by adding the atomic masses of its constituent elements:
Co: 58.93 g/mol Cl: 35.45 g/mol (there are two chlorine atoms in CoCl2)
So the molar mass of CoCl2 is:
Molar mass = 58.93 g/mol + 2(35.45 g/mol) = 129.91 g/mol
Therefore, the molar mass of CoCl2 is 129.91 g/mol.
In chemistry, the molar mass (M) of a chemical compound is defined as the ratio between the mass and the amount of substance (measured in moles) of any sample of said compound. The molar mass is a bulk, not molecular, property of a substance. The molar mass is an average of many instances of the compound, which often vary in mass due to the presence of isotopes.
Learn more about molar mass here:
https://brainly.com/question/12127540
#SPJ4
What is an electron transport chain and what is its role during the light reactions?
Answer :
An electron transport chain (ETC) is a series of proteins and other molecules embedded in a membrane, which transfer electrons from one molecule to the next. The ETC plays a key role in cellular respiration, photosynthesis, and other metabolic processes that involve the transfer of energy in living cells.
During the light reactions of photosynthesis, the ETC is located in the thylakoid membrane of the chloroplast. Its role is to transport electrons and protons from water to NADP+ (nicotinamide adenine dinucleotide phosphate) to form NADPH, which is a key energy carrier in photosynthesis.
In summary, the electron transport chain is a crucial component of the light reactions of photosynthesis, where it helps to generate energy-rich molecules (NADPH and ATP) that are used in the next stage of photosynthesis, the Calvin cycle.
How many grams of na2o are requieres to produce 160 grams of NaOH? Show your work
Na2O+H2O->2NaOH
Water has a molar mass of 18 g/mol while sodium hydroxide has a molar mass of 40 g/mol. As a result, to make 80 g of sodium hydroxide, 18 g of water is needed. Hence, 36 grams of water are required to make 160 grams of NaOH.
What balanced equation describes the reaction between Na O2 and Na2O?Both Na and O are out of balance, thus the balanced equation using the hit-and-miss method is 4Na+O22Na2O.
Why is sodium oxide's chemical formula Na2O?Due to the molar mass of 61.98 g mol-1, the structure of Na2O is a little complex. The oxidization is composed of a single oxygen atom, which is bonded to two sodium atoms via a few ionic connections. The molecule's structure is similar to that of an antifluorite crystal, so the Na atoms coordinate 4 O2 atoms.
To know more about molar mass visit:-
brainly.com/question/22997914
#SPJ1
