Rosalinda invested some of her $15,000 in bonds that made a 6% profit and the rest in bonds that made a 10% profit. If the profit on the 10% bonds was $1,000 more than the profit on the 6% bonds, how much did Rosalinda invest in the 6% bonds?

The correct answer is 3 × 10⁰ , is the quotient.

Here, we have,

To find a quotient, we need to divide the two numbers.

The equation given to us is :

21×10⁻²¹/ 7×10⁻²¹

To Simplify the above equation and finding out the quotient, we need to divide the above equation, we get:

21×10⁻²¹/ 7×10⁻²¹

= 21/7 ×10⁻²¹ / 10⁻²¹

Taking the reciprocal of the denominator and multiplying it with the numerator, we get:

=21/7 × 10⁽⁻²¹⁺²¹⁾

=21/7 × 10⁰

=3 × 10⁰

Hence, the correct answer is 3 × 10⁰ is the quotient .

learn more on quotient :

https://brainly.com/question/12153111

#SPJ1

The equivalent value of the inequality is x > 2

Given data ,

Let the inequality equation be represented as A

Now , the value of A is

Substituting the values in the equation , we get

8x > 16

Divide by 8 on both sides , we get

x > 2

Hence , the inequality is all numbers greater than 2

To learn more about inequality equations click :

https://brainly.com/question/11897796

#SPJ1

If a, b, and c are real numbers where a > 0 and b^2 - 4ac > 0, then the quadratic equation ax^2 + bx + c = 0 will have two distinct real roots.

In this case, if we are looking for solutions to the inequality ax^2 + bx + c < 0, then we can conclude that the graph of the quadratic function will open downward and the solutions will be the values of x that lie between the two roots. Specifically, if the two roots are x1 and x2 (where x1 < x2), then the solution to the inequality will be:

x1 < x < x2

In other words, the values of x that make the quadratic expression negative will be the values of x that lie between the two roots.

To learn more about quadratic equations visit : https://brainly.com/question/1214333

#SPJ11

Based on the information provided, it seems unlikely that the tri-tip roast was thawing at a safe rate. Thawing on the counter for three hours, with the temperature only reaching 46°, may not be sufficient for safe thawing.

Thawing food safely is crucial to prevent bacterial growth and maintain food quality. The ideal methods for thawing meat are in the refrigerator or using cold water. The counter method can be risky as it allows the meat to remain in the "danger zone" (40°F to 140°F) for an extended period.

Given that the tri-tip roast was initially at a temperature of 35°F and the house temperature was 75°F, it is unlikely that the roast was thawing at a safe rate. After one hour, the temperature only increased by 11 degrees, which is relatively slow. After another two hours, the temperature reached 46°F, indicating a slow thawing process.

To ensure food safety, it is recommended to thaw meat in the refrigerator, allowing for gradual thawing while keeping the meat at a safe temperature. Alternatively, the cold water thawing method can be used, where the meat is submerged in a leak-proof plastic bag and placed in cold water, with the water changed every 30 minutes.

Thawing meat on the counter for an extended period, especially when the temperature remains relatively low, increases the risk of bacterial growth and potential foodborne illnesses. It is important to prioritize food safety by following recommended thawing methods to ensure the roast thaws safely and maintains its quality.

To learn more about temperature click here, brainly.com/question/7510619

#SPJ11

Question : I took a tri-tip roast out of the freezer at 9 AM to thaw so I could barbecue it later. After I had been in the on the counter for an hour its temperature was 35°. After another two hours it was still very cold and the temperature was 46°. By the way I keep my house a consistent 75°. Was the thawing been at a safe rate?

Wendy can make a maximum of 5 pieces with a length of 6 feet using the two pieces of thread.

Now, the greatest length of the pieces she can make with the two pieces of thread, we need to find the greatest common factor (GCF) between 18 and 12, which represents the longest length that can divide both lengths evenly.

We can start by listing the factors of each length:

Factors of 18:

1, 2, 3, 6, 9, 18

Factors of 12:

1, 2, 3, 4, 6, 12

The common factors of both lengths are 1, 2, 3, and 6.

Therefore, the greatest common factor (GCF) of 18 and 12 is 6.

This means that Wendy can cut both pieces of thread into pieces of length 6 feet, and they will be able to produce the maximum number of pieces with no leftover thread.

Now, the number of pieces she can make, we can divide the length of each thread by the GCF:

Number of pieces from 18-foot thread:

18 ÷ 6 = 3

Number of pieces from 12-foot thread:

12 ÷ 6 = 2

Therefore, Wendy can make a maximum of 3+2=5 pieces with a length of 6 feet using the two pieces of thread.

Learn more about the divide visit:

https://brainly.com/question/28119824

#SPJ1

Therefore, the Total Direct Materials cost variance is -$2,481. This indicates an unfavorable variance, meaning that the actual cost of materials was higher than the standard cost of materials.

To calculate the Total Direct Materials cost variance, we need to first calculate the Actual Direct Materials cost and the Standard Direct Materials cost.

Actual Direct Materials Cost = Actual quantity of materials used x Actual cost per yard

= 9,450 units x 4.75 yards per unit x $2.04 per yard

= $92,019

Standard Direct Materials Cost = Standard quantity of materials allowed x Standard cost per yard

= 9,450 units x 5 yards per unit x $2.00 per yard

= $94,500

Total Direct Materials cost variance = Actual Direct Materials Cost - Standard Direct Materials Cost

= $92,019 - $94,500

= -$2,481

To know more about cost variance,

https://brainly.com/question/15062291

#SPJ11

To find [tex]c[/tex] and [tex]a[/tex], so that [tex]f(x)=ca^x[/tex] satisfies the given conditions [tex]f(1)=64[/tex] and  [tex]f(2)=512[/tex], we need to set up a system of equations. After solving the equations, [tex]c=32[/tex] and [tex]a=2[/tex].

Making the equations.

First, we know that [tex]f(1)=ca^1=64[/tex] which means that [tex]ca=64[/tex].

Next, we can use [tex]f(2)=ca^2=512[/tex] and substitute in [tex]ca=64[/tex] from the first equation to get

[tex]64a^2=512[/tex].

Solving for [tex]a[/tex], we find that [tex]a=2[/tex].

Now that we know [tex]a=2[/tex], we can substitute it back into [tex]ca=64[/tex] the first equation to solve for [tex]c[/tex].

We get [tex]c=32[/tex].

Therefore, the function [tex]f(x)=32(2)^x[/tex] satisfies the given conditions [tex]f(1)=64[/tex]  and [tex]f(2)=512[/tex].

In summary, to find [tex]c[/tex] and [tex]a[/tex] for a given function, we can set up a system of equations using the given conditions. By solving for one variable at a time, we can find the values of c and a that satisfy the conditions.

Learn more about equation:

https://brainly.com/question/29174899

#SPJ11

The extreme values of the function f(x, y) = xy(2y^2 x^4 − y^4) on the circle x^2 + y^2 = 1 are approximately ±0.235

To find the extreme values of the given function f(x, y) = xy(2y^2 x^4 − y^4) on the circle x^2 + y^2 = 1, we can use the method of Lagrange multipliers.

First, we write down the Lagrangian function L(x, y, λ) as follows:

L(x, y, λ) = xy(2y^2 x^4 − y^4) + λ(x^2 + y^2 − 1)

Then, we take the partial derivatives of L with respect to x, y, and λ and set them equal to zero:

∂L/∂x = y(2y^2 x^4 − y^4) + 2λx = 0

∂L/∂y = x(6y^3 x^4 − 4y^3) + 2λy = 0

∂L/∂λ = x^2 + y^2 − 1 = 0

Simplifying the first two equations, we get:

2y^5 x^4 − y^5 + 2λxy = 0

6y^4 x^4 − 4y^4 + 2λxy = 0

Dividing these equations, we obtain:

3x^4 = 2y^2

Substituting this back into the equation x^2 + y^2 = 1, we get:

3x^4 + x^2 = 1

This is a quartic equation in x^2. We can solve it using numerical methods to get the two possible values of x:

x ≈ ±0.681

y ≈ ±0.732

Plugging these values into the equation 3x^4 = 2y^2, we get:

y ≈ ±0.524

Now we can calculate the corresponding values of the function f(x, y) = xy(2y^2 x^4 − y^4):

f(x, y) ≈ ±0.235

Therefore, the extreme values of the function f(x, y) on the circle x^2 + y^2 = 1 are approximately ±0.235, and they are attained at the points (±0.681, ±0.732) and (±0.732, ±0.681).

Learn more about: Extreme value of function - https://brainly.com/question/12499771

#SPJ11

Answer:

14+14 + 4pi= 28 + 4pi

[tex]\pi[/tex]

I understand that you want to know the consequences of rounding off answers when solving an integer programming problem by treating it as a linear programming problem. Here's my explanation:

When you solve an integer programming problem as a linear programming problem and then round off the answers, you may encounter the following issues:

1. The values of decision variables obtained by rounding off might be sub-optimal: Rounding off can lead to a solution that is not the true optimal integer solution, as linear programming allows fractional values that might not be feasible in the integer problem.

2. The values of decision variables obtained by rounding off might violate some constraints: Rounding off can result in values that do not satisfy the integer constraints, which could render the solution infeasible for the original integer problem.

3. The values of decision variables obtained by rounding off are not always very close to the optimal values: Although it is possible for the rounded solution to be close to the optimal integer solution, there is no guarantee that this will be the case, as the linear relaxation might lead to significantly different values.

In summary, when solving an integer programming problem by treating it as a linear programming problem and rounding off the answers, you might encounter sub-optimal solutions, constraint violations, and values that are not very close to the true optimal integer values.

To know more about constraint violations, visit:

https://brainly.com/question/31248185

#SPJ11

Answer:

1

Step-by-step explanation:

count number in sequence

The metric unit that would be best to measure the capacity of a cereal bowl is milliliters (ml).

Capacity is a measure of the amount of fluid that a container can hold. Cereal bowls are typically used to hold liquids such as milk or yogurt along with cereal. Milliliters are a commonly used metric unit of volume that would be appropriate for measuring the capacity of a cereal bowl. Other metric units of volume such as liters or cubic centimeters could also be used, but milliliters would provide a more precise measurement for a smaller container such as a cereal bowl. To measure the capacity of a cereal bowl in milliliters, one would simply pour a known amount of water into the bowl and measure the volume of the water using a measuring cup or a graduated cylinder.

Learn more about metric unit here

https://brainly.com/question/28896549

#SPJ11

The equation of the tangent line to the curve y = ln(x^3 - 124) at the point (5, 0) is y = 75x - 375.

To determine the equation of the tangent line to the curve y = ln(x^3 - 124) at the point (5, 0), we need to get the derivative of the function and evaluate it at x = 5.

Let's start by finding the derivative of y with respect to x. Using the chain rule, the derivative of ln(x^3 - 124) is given by:

dy/dx = 1 / (x^3 - 124) * d/dx (x^3 - 124)

The derivative of x^3 - 124 with respect to x is simply 3x^2. So, the derivative of y becomes:

dy/dx = 1 / (x^3 - 124) * 3x^2

Now, let's evaluate this derivative at x = 5:

dy/dx = 1 / (5^3 - 124) * 3(5^2)

= 1 / 1 * 3(25)

= 75

Therefore, the slope of the tangent line at the point (5, 0) is 75.

To get the equation of the tangent line, we use the point-slope form of a line:y - y1 = m(x - x1)

Substituting the values of the point (5, 0) and the slope m = 75, we have:y - 0 = 75(x - 5)

Simplifying the equation, we get:

y = 75x - 375

Thus, the equation of the tangent line to the curve y = ln(x^3 - 124) at the point (5, 0) is y = 75x - 375.

Learn more about tangent line here, https://brainly.com/question/30162650

#SPJ11

The probability that at least two students share their birthday in the same month is 88.4%

To calculate the probability that at least two students share their birthday in the same month, we can use the complement rule.

First, let's calculate the probability that no two students share their birthday in the same month.

The first student can have their birthday in any month. The second student, however, must have their birthday in a different month than the first student, which has a probability of 11/12. Similarly, the third student must have their birthday in a different month than the first two students, which has a probability of 10/12. Continuing this pattern, the probability that no two students share their birthday in the same month is:

1 x 11/12 x 10/12 x 9/12 x 8/12 x 7/12 x 6/12 x 5/12 x 4/12 x 3/12 = 0.116

Therefore, the probability that at least two students share their birthday in the same month is:

1 - 0.116 = 0.884

So, there is a high probability (88.4%) that at least two students in a class of 10 share their birthday in the same month.

Know more about  probability click here:

https://brainly.com/question/30034780

#SPJ11

The rectangular prism can hold  2040 cubic feet of volume when it's three-quarters full.

The volume of a rectangular prism can be calculated using the formula:

V = L * W * H

where L is the length, W is the width and H is the height of the rectangular prism.

We have:

L = 40 ft

W = 8 ft

H = 8 ft 6 in = 8.5 ft   (Remember: 1 ft = 12 in)

Substituting into the formula:

V = 40 * 8 * 8.5

V = 2720 cubic feet

when it's three-quarters full:

Volume = 3/4 * 2720

Volume = 2040 cubic feet

Learn more about rectangular prism on:

https://brainly.com/question/32355435

#SPJ1

Complete Question

A shipping container is in the form of a right rectangular prism, with dimensions of 40 ft by 8 ft by 8 ft 6 in. How many cubic feet of shipped goods would it hold when it's three-quarters full? Round your answer to the nearest tenth if necessary.

The expression for the height of the cart in terms of O and ramp position x(t) is h = (x(t))²sin²(O)/2g

To derive an expression for the height of the cart in terms of O and ramp position x(t), we can use conservation of energy.

At the top of the ramp, the cart has potential energy (mgh), where m is the mass of the cart, g is the acceleration due to gravity, and h is the height of the cart above the ground.

As the cart moves down the ramp, it gains kinetic energy (1/2mv²), where v is the velocity of the cart.

Since the ramp is frictionless, the only forces acting on the cart are gravity and the normal force from the ramp. Therefore, we can use conservation of energy to relate the potential energy at the top of the ramp to the kinetic energy at any point x(t) on the ramp:

mgh = 1/2mv²

Simplifying this expression, we can solve for h in terms of x(t) and O:

h = (1/2g)(v²) = (1/2g)(2gx(t)sin(O))²

Therefore, the expression for the height of the cart in terms of O and ramp position x(t) is h = (x(t))²sin²(O)/2g

Learn more about frictionless here,

https://brainly.com/question/30854343

#SPJ11

Find an angle θ, with 0? < θ < 360?, that has the same are:

(a) θ = 120° or 240°

(b) No solution exists.

(a) For cosine of θ to be the same as the cosine of 240°, θ must be an angle in the second or third quadrant, as cosine is negative in those quadrants. We can find the angle using the identity cos(θ) = cos(360° - θ).

cos(θ) = cos(240°)

cos(θ) = cos(360° - 240°)

cos(θ) = cos(120°)

So, θ = 120° or θ = 360° - 120° = 240°.

(b) For sine of θ to be the same as the sine of 240°, θ must be an angle in the third or fourth quadrant, as sine is negative in those quadrants. However, there is no angle whose sine is equal to the sine of 240°. This is because the sine function is periodic with a period of 360°, and sine(240°) is equal to -sin(120°), so there is no unique solution for θ.

For more questions like Angle click the link below:

https://brainly.com/question/28451077

#SPJ11

The volume of the solid region is approximately 10.4109 cubic units.

To find the volume of the solid region lying below the surface z = f(x,y) and above the plane region R, we can use the formula:

V = ∬R f(x,y) dA

where dA is the area element in the xy-plane and the double integral is taken over the region R.

To evaluate this integral, we first need to perform a change of variables. Let u = x + y and v = x - y. Then the inverse transformations are x = (u + v)/2 and y = (u - v)/2. The Jacobian of this transformation is:

J = ∂(x,y) / ∂(u,v) = 1/2

Next, we need to express the surface z = f(x,y) in terms of u and v. Using the substitutions x = (u + v)/2 and y = (u - v)/2, we get:

f(x,y) = (x+y)ex-y = [(u+v)/2 + (u-v)/2]e(u-v)/2 = ueu/2

So the volume of the solid is:

V = ∬R f(x,y) dA

= ∬R ueu/2 dA

= ∫₂⁴ ∫₂⁶ (u/2)e^(u/2) du dv (using the limits of integration for R in terms of u and v)

= ∫₂⁶ [e^(u/2)u²/4] from 2 to 4 dv

= ∫₂⁴ [e^(u/2)u²/4] from u-2 to 6 du

= 16(e^3 - e^2)/3

Therefore, the volume of the solid region is approximately 10.4109 cubic units.

Learn more about volume here

https://brainly.com/question/27710307

#SPJ11

Answer:

A

Step-by-step explanation:

The resulting change in volume when the radius of a sphere is doubled can be determined by examining the formula for the volume of a sphere.

The volume of a sphere is given by the formula:

V = (4/3) * π * r^3

When the radius (r) is doubled, we can substitute the new radius (2r) into the formula and calculate the new volume (V'):

V' = (4/3) * π * (2r)^3

V' = (4/3) * π * 8r^3

V' = (4/3) * π * 8 * r^3

V' = (32/3) * π * r^3

Comparing the new volume (V') with the original volume (V), we can see that the new volume is multiplied by a factor of (32/3) when the radius is doubled.

Therefore, the correct answer is:

A The original volume is multiplied by 32/3.

When the radius of a sphere is doubled, the resulting change in volume is given by option D: The original volume is multiplied by 8.

The volume of a sphere is proportional to the cube of its radius. When the radius is doubled, the new volume will be 2^3 = 8 times the original volume.

Answer:

90°

Step-by-step explanation:

A quadrilateral is a shape with 4 sides.

Its interior angles always sum up to 360°.

The other angles = 52 + 97 + 121 = 270°

The missing angle = 360 - 270 = 90°

Answer: 6:45 PM

Step-by-step explanation:

Left house at 6:30 PM

Jogging Speed of 12 km/hr

Distance: 3 km

Distance/Speed = 3/12 = 1/4 = 0.25

0.25 of an hour is 15 mins

6:30 + 0:15 = 6:45

The curve is given by [tex]x = y^2,[/tex]so we can express the integral as:

[tex]∫c x^3 y^4 dx = ∫c (y^2)^3 y^4 dx = ∫c y^10 dx[/tex]

To find the limits of integration, we need to determine the values of y for the endpoints of the curve. At the starting point (0, 0), we have y = 0, and at the endpoint (4, 2), we have y = 2^(1/2). Therefore, the integral becomes:

[tex]∫c x^3 y^4 dx = ∫0^(2^(1/2)) y^10 dx = [1/11 y^11]_0^(2^(1/2)) =[/tex][tex]2^(11/2) / 11[/tex]

Therefore, the value of the integral is [tex]2^(11/2) / 11[/tex]

To know more about limits of integration, refer here:

https://brainly.com/question/31956165

#SPJ11

The expression for the cubic function f is -5x^3 + 20x^2 - 25x.

To find an expression for a cubic function f(x) given specific values, we can start by using the general form of a cubic function: f(x) = ax^3 + bx^2 + cx + d.

We are given three points on the graph of the function: (5, 300), (-5, 0), and (0, 0), as well as (6, 0) which gives us a fourth point.

Substituting the x and y values into the equation, we get the following system of equations:

For point (5, 300):

300 = a(5^3) + b(5^2) + c(5) + d

For point (-5, 0):

0 = a(-5^3) + b(-5^2) + c(-5) + d

For point (0, 0):

0 = a(0^3) + b(0^2) + c(0) + d

For point (6, 0):

0 = a(6^3) + b(6^2) + c(6) + d

Simplifying these equations, we obtain a system of linear equations in terms of a, b, c, and d. Solving this system will give us the coefficients for the cubic function.

After solving the system, we obtain the expression for the cubic function:

f(x) = -5x^3 + 20x^2 - 25x

Know more about cubic function here:

https://brainly.com/question/29337275

#SPJ11

If the initial population of fruit flies is 360 flies, Therefore, 10,388 fruit flies are in the population after 80 days.

To find the population of fruit flies after 80 days, we need to integrate the given rate function with respect to time from t=0 to t=80 i.e. ∫g(t)dt = ∫5e^(0.01t)dt.

Using integration by substitution, let u=0.01t and du/dt=0.01, so dt = du/0.01

∫5e^(0.01t)dt = ∫5e^udu/0.01 = 500e^(0.01t)/0.01 + C

where C is the constant of integration.

500e^(0.01*0)/0.01 + C = 360

C = 360 - 500 = -140

So the population function is: P(t) = 500e^(0.01t)/0.01 - 140

P(80) = 500e^(0.01*80)/0.01 - 140 ≈ 10388

Therefore, there are approximately 10,388 fruit flies in the population after 80 days.

To learn more about “population” refer to the https://brainly.com/question/29885712

#SPJ11

The degree sequence of a graph is the list of degrees of its vertices arranged in non-increasing order.

For a bipartite graph $K_{m,n}$ with $m$ vertices in the first partite set and $n$ vertices in the second partite set, every vertex in the first partite set is connected to all vertices in the second partite set and vice versa. Therefore, the degree of each vertex in the first partite set is $n$ and the degree of each vertex in the second partite set is $m$.

So, the degree sequence of the bipartite graph $K_{m,n}$ is $n,n,\ldots,n$ (repeated $m$ times) followed by $m,m,\ldots,m$ (repeated $n$ times). In other words, the degree sequence consists of two blocks, each of length $m+n$, where the first block contains the degree $n$ repeated $m$ times and the second block contains the degree $m$ repeated $n$ times.

To learn more about “bipartite graph” refer to the https://brainly.com/question/28062985

#SPJ11

The values of A, B and H in this problem are given as follows:

The standard definition of the sine function is given as follows:

y = Asin(Bx) + H

For which the parameters are listed as follows:

The difference between the maximum value and the minimum value of the function is of 8, hence the amplitude is given as follows:

2A = 8

A = 4.

The function oscillates between 2 and 10, instead of between -4 and 4, hence the vertical shift is given as follows:

H = 6.

The period is of 6 units, hence the coefficient B is given as follows:

2π/B = 6

2π = 6B

B = 2π/6

B = π/3.

The problem asks for the values of A, B and H.

More can be learned about trigonometric functions at brainly.com/question/21558626

#SPJ1

According to philosopher John Stuart Mill, moral rules have certain advantages over act-calculus, also known as act utilitarianism.

Mill's ethical theory, known as utilitarianism, focuses on maximizing overall happiness or utility as the basis for determining the morality of actions.

One advantage of moral rules, according to Mill, is that they provide general guidance and stability in moral decision-making.

Moral rules offer clear guidelines that can be followed in different situations, which reduces the need to constantly calculate and weigh the consequences of each individual action.

By having pre-established rules, individuals can rely on them to make decisions without having to engage in complex moral calculations every time.

Another advantage of moral rules, according to Mill, is that they protect individual rights and promote justice. In utilitarianism, the well-being and happiness of individuals are essential.

However, relying solely on act-calculus may lead to situations where the rights and interests of some individuals are sacrificed for the greater happiness of the majority.

Moral rules provide a framework for respecting individual rights, ensuring fairness, and preventing potential abuses that may arise from purely calculating the consequences of each action.

Additionally, Mill argues that moral rules provide a sense of security and predictability in society.

When individuals are aware of the rules and understand the general expectations of behavior, they can trust in the consistency and fairness of the moral framework.

This helps to maintain social order and stability, as people can rely on shared rules and norms to govern their interactions.

However, it is important to note that Mill also acknowledged the limitations of moral rules and recognized that they are not infallible.

He emphasized the importance of critical thinking and flexibility in applying moral rules, particularly in situations where strict adherence to a rule may lead to harmful or unjust outcomes.

Mill's position can be seen as a blend of rule-utilitarianism and act-utilitarianism, acknowledging the value of moral rules while also recognizing the need for flexibility and thoughtful consideration of specific circumstances.
To learn more about utilitarianism go to:

https://brainly.com/question/29313132?referrer=searchResults

#SPJ11

As the sample size increases, the t-distribution becomes more concentrated around the mean, and there is less uncertainty about the population mean.

The t-distribution is a probability distribution that is used in statistical inference to test hypotheses about the mean of a population when the sample size is small and the population standard deviation is unknown. The shape of the t-distribution depends on the degrees of freedom (df), which is determined by the sample size.

When the degrees of freedom are small, the t-distribution has more probability mass in the tails and is more spread out than when the degrees of freedom are large. As the degrees of freedom increase, the t-distribution approaches the standard normal distribution, which has zero mean and unit variance.

In this case, we are comparing the t-distributions for df = 4 and df = 20. Since df = 4 is smaller than df = 20, the t-distribution for df = 4 is flatter and more spread out than the t-distribution for df = 20. This means that the tails of the distribution are fatter and there is more variability in the data for df = 4 than for df = 20. In other words, when the sample size is small, there is more uncertainty about the population mean, and it is more likely that the sample mean will be farther away from the true population mean.

To know more about probability visit:

brainly.com/question/32004014

#SPJ11

Answer: (x , y) = (3, -2)

Step-by-step explanation:

Answer:

y = -3x

Step-by-step explanation:

We can see that the given line:

[tex]y - 1 = -3(x - 2)[/tex]

is in point-slope form:

[tex]y-b = m(x-a)[/tex],

where [tex](a,b)[/tex] is a point on the line.

Using this knowledge, we can identify the slope as [tex]m = -3[/tex].

Parallel lines have the same slope. Therefore, to answer this question, we can create any line in slope-intercept form with a slope of -3.

One answer could be:

y = -3x

The scale factor for each dilation include the following: B. 2; enlargement.

In Mathematics and Geometry, a scale factor can be calculated or determined through the division of the dimension of the image (new figure) by the dimension of the original figure (pre-image).

Mathematically, the formula for calculating the scale factor of any geometric object or figure is given by:

Scale factor = side length of image/side length of pre-image

By substituting the given side lengths or dimensions into the formula for scale factor, we have the following;

Scale factor = B'C'/BC

Scale factor = 10/5

Scale factor = 2 (Since the scale factor is greater than 1, it is an enlargement.)

Read more on scale factor here: brainly.com/question/29967135

#SPJ1