roughly, what fraction of our nation's electrical energy needs in total is supplied by coal?

Answers

Answer 1

Coal is one of the primary sources of energy in the United States. It is used for producing electricity and steel manufacturing. Roughly, coal supplies about 20% of the energy in the United States.

Coal is an abundant resource in the United States, and it is a vital source of energy for the country's power needs. The country's electrical energy needs are substantial, and the amount of energy that is generated from coal is enormous. It provides a significant portion of the country's electricity, powering homes, businesses, and other industrial sectors. Renewable energy sources are being promoted globally to reduce the carbon footprint. However, the majority of the energy comes from fossil fuels. Coal is still being used in several countries, including the US, due to its abundance and affordability. As of 2021, approximately 20% of the energy generated in the US comes from coal.

In conclusion, it is safe to say that about 20% of our nation's electrical energy needs in total is supplied by coal. It is essential to adopt and promote renewable sources of energy, such as solar and wind, to reduce the carbon footprint and minimize the environmental impact.

To know more about Coal visit :

https://brainly.com/question/30560160

#SPJ11


Related Questions

the air temperature of a large body of water does not change as much as nearby land because

Answers

The air temperature of large bodies of water changes less compared to nearby land due to water's high heat capacity, the mixing effect of water currents, and the energy exchange during evaporation and condensation processes.

The air temperature of a large body of water does not change as much as nearby land due to several factors:

1. High heat capacity: Water has a higher heat capacity than land, which means it can absorb and store more heat energy without a significant increase in temperature. Land, on the other hand, has a lower heat capacity and heats up and cools down more rapidly.

2. Mixing effect: Water bodies are constantly in motion due to currents, waves, and tides. This mixing effect distributes the heat energy throughout the water column, preventing large temperature variations. In contrast, land surfaces are stationary, and heat is not distributed as effectively.

3. Evaporation and condensation: Water has a high latent heat of vaporization, meaning it requires a significant amount of energy to change from liquid to vapor. As water evaporates from the surface of a body of water, it absorbs heat energy from the surroundings, thereby cooling the air above it. Conversely, when water vapor condenses, it releases heat, warming the air.

Learn more About condensation from the given link

https://brainly.com/question/30629848

#SPJ11

Following the May 1980 eruption of Mount St. Helens, Washington, thousands of trees lay on the ground, all parallel to one another. Why?

Answers

Following the May 1980 eruption of Mount St. Helens, Washington, thousands of trees lay on the ground, all parallel to one another. The reason behind this was the massive lateral blast that hit the region.

The Mount St. Helens eruption of May 18, 1980, was catastrophic. At 8:32 am, a massive landslide, followed by a huge lateral blast, released ash and debris into the atmosphere and caused a pyroclastic flow. The landslide loosened the trees from their soil bases, and the massive lateral blast pushed them all down at once.

The force of the blast was so strong that the trees were broken off at their bases, then launched at a speed of about 300 miles per hour (480 kilometers per hour) horizontally through the air, where they then fell to the ground, all in the same direction.

According to the records, a few trees managed to survive the eruption and now stand as a reminder of the resilience of life.

To learn more about eruption

https://brainly.com/question/824390

#SPJ11

In the Northern style of Chinese cooking, the sauce usually splashed on Peking duck meat wrapped in thin pancakes is :
a. Clam sauce
b. oyster sauce
c. Peach juice
d. Soy sauce
e. Hoisin sauce

Answers

The sauce splashed on Peking duck meat wrapped in thin pancakes in the Northern style of Chinese cooking is (option. e) hoisin sauce, which adds a sweet and savory flavor to complement the roasted duck.

The sauce typically splashed on Peking duck meat wrapped in thin pancakes in the Northern style of Chinese cooking is e. Hoisin sauce.

1. Peking duck is a famous dish in Beijing, China. It involves roasting a whole duck until the skin is crispy and the meat is tender.

2. The cooked duck is traditionally served with thin pancakes, which are used as wrappers for the duck meat.

3. To enhance the flavor of the duck, a sauce is typically added to the pancakes. In the Northern style of Chinese cooking, this sauce is commonly hoisin sauce.

4. Hoisin sauce is a thick, dark sauce made from soybeans, garlic, vinegar, and various spices. It has a slightly sweet and savory taste, which complements the rich flavors of the roasted duck.

5. When serving Peking duck, a small amount of hoisin sauce is usually spread onto the pancake, followed by a few slices of duck meat, along with some scallions and cucumbers. The pancake is then rolled up and eaten.

Learn more About sauce from the given link

https://brainly.com/question/20393166

#SPJ11

this gigapan image shows a dark metamorphic rock in contact with a lighter igneous rock (granite). review the statements below, and determine which are correct about the dark metamorphic rock on the left in the gigapan image. select all that apply.

Answers

In the gigapan image, the dark metamorphic rock on the left is in contact with a lighter igneous rock (granite).

Let's review the statements and determine which are correct about the dark metamorphic rock:

The dark metamorphic rock is formed from the cooling and solidification of magma: This statement is incorrect. Metamorphic rocks are formed from the transformation of pre-existing rocks under high temperature and pressure conditions, not from the cooling and solidification of magma.The dark metamorphic rock has undergone significant changes in texture and mineral composition: This statement is correct. Metamorphic rocks experience changes in their texture and mineral composition due to the intense heat and pressure they are subjected to during their formation.The dark metamorphic rock is likely to contain minerals such as mica, garnet, or quartz: This statement is correct. Metamorphic rocks often contain minerals such as mica, garnet, or quartz, depending on the specific conditions of their formation.The dark metamorphic rock is less resistant to weathering and erosion compared to the lighter igneous rock: This statement may or may not be correct. The resistance of a rock to weathering and erosion depends on various factors, including its mineral composition and the physical properties of the rock. Without more information about the specific rocks in the gigapan image, we cannot determine if this statement is correct.

To summarize, the correct statements about the dark metamorphic rock in the gigapan image are:

The dark metamorphic rock has undergone significant changes in texture and mineral composition.The dark metamorphic rock is likely to contain minerals such as mica, garnet, or quartz.

Learn more about dark metamorphic rock: https://brainly.com/question/31132571

#SPJ11

given the following anova table, what is the correct conclusion source df sum of squares mean squares f p value treatment 2 2510.5 1255.3 93.44 0.0001 error 12 161.2 13.4 total 14 2671.7 group of answer choices there is no statistically significant difference between the population proportions. at least one of the population proportions are different. there is no statistically significant difference between the population means. at least one of the population means are different.

Answers

Based on the given ANOVA table, the correct conclusion is that at least one of the population means is different.

The ANOVA table provides information about the variation in the data and tests whether there are significant differences between the groups being compared. In this case, the "Treatment" row represents the groups or treatments being compared, while the "Mean Squares" column represents the variability within each treatment. The "F" statistic and "p-value" are used to determine the statistical significance of the differences observed.

The extremely low p-value (0.0001) indicates that there is a statistically significant difference between the treatments. The F-statistic of 93.44 also supports this conclusion. These results suggest that at least one of the population means is different, meaning there are significant differences among the groups being compared.

It is important to note that the specific conclusion depends on the context and the nature of the experiment or study. However, based solely on the information provided in the ANOVA table, the correct conclusion is that at least one of the population means is different.

Learn more about : Conclusion

brainly.com/question/78686

#SPJ11

in light of what you've learned about the formation of our own solar system, decide whether the discovery should be considered reasonable or surprising.

Answers

Answer:

Explanation:

A .fairly circular and in the same plane.

B .Our solar system formed at the same time as our Sun as described in the nebular hypothesis. The nebular hypothesis is the idea that a spinning cloud of dust made of mostly light elements, called a nebula, flattened into a protoplanetary disk, and became a solar system consisting of a star with orbiting planets.

which of the following terms denotes permanently inhabited areas of the earth's surface? a) dominion b) ambit c) topography d) ecumene

Answers

The correct answer is option (d) which is the term that denotes permanently inhabited areas of the Earth's surface is " ecumene."

The term that denotes permanently inhabited areas of the Earth's surface is "ecumene."

Ecumene refers to the portion of the Earth's surface that is inhabited and settled by human populations.

To determine the correct term, we can analyse each option:

a) "Dominion" refers to the power or authority to govern or control a particular territory, but it does not specifically indicate permanent habitation.

b) "Ambit" refers to the scope, extent, or range of something, such as an activity or authority, but it does not relate directly to permanently inhabited areas.

c) "Topography" refers to the physical features of a land surface, such as elevation, mountains, valleys, and rivers, which are not indicative of permanent human habitation.

d) "Ecumene" is the correct term as it specifically refers to the permanently inhabited areas of the Earth's surface, encompassing regions where people have established settlements and communities.

Therefore, the correct option is (d).

Learn more About ecumene from the given link.

https://brainly.com/question/13171489

#SPJ11

Do you think that map projection distortions can be used for
political or
economic manipulation? Explain.

Answers

Map projection distortions can be used for political and economic manipulation. Map projections can manipulate the image of the Earth by reflecting various perspectives.

There are numerous ways to illustrate a planet, and map projections demonstrate how it appears from various angles. A world map can be changed by altering the size, shape, and distance of land masses. For political or economic purposes, these modifications may be used to manipulate a viewer's perception of the planet. An altered projection can make one country or region appear to be superior to another.

Therefore, map projection distortions can be utilized for political or economic manipulation. These distortions may be utilized in a variety of ways to deceive or mislead people. The use of map projections to distort the truth may have far-reaching implications, impacting everything from public policy to global trade.

To know more about Earth visit :

https://brainly.com/question/31064851

#SPJ11

homo habilis carried usable rocks over long distances to places where tools were fashioned. true false

Answers

The statement that Homo habilis carried usable rocks over long distances to places where tools were fashioned is not supported by scientific evidence.False.

The statement that Homo habilis carried usable rocks over long distances to places where tools were fashioned is not accurate. Homo habilis, an early human species that lived approximately 2.1 to 1.5 million years ago, did not possess the capability to carry rocks over long distances.

Homo habilis is known for being one of the earliest toolmakers, utilizing simple stone tools for various purposes. However, these tools were typically made and used in close proximity to the raw materials available in their immediate environment.

Homo habilis did not have the capacity to transport rocks over long distances to specific locations for tool production.

The transportation of rocks over long distances for toolmaking purposes became more prominent in later human species, such as Homo erectus and Homo sapiens, who developed more advanced cognitive abilities and technological skills.

These later species were capable of intentionally selecting and transporting specific rocks or raw materials over extended distances to create tools.

Therefore, the statement that Homo habilis carried usable rocks over long distances to places where tools were fashioned is not supported by scientific evidence.

Learn more about Homo habilis visit:

https://brainly.com/question/4282325

#SPJ11

Don’t know the answer and don’t understand

Answers

The missing angle measure in the triangle is approximately 48°.

Side lengths will be AC ≈ 7m, AB ≈ 42°, BC ≈ 4.7m

How to calculate the value

Let's find the missing side length BC and the remaining angle measure:

Using the trigonometric ratio of sine (sin), we can determine BC by using the following formula:

sin(angle) = opposite/hypotenuse

sin(42°) = BC/7

Rearranging the formula to solve for BC:

BC = sin(42°) * 7

Using a calculator, we find:

BC ≈ 4.697

So, BC is 4.7 meters to the nearest tenth.

Now, let's find the remaining angle measure:

Since we know it is a right triangle, the sum of all angles is 90°.

angle C = 90° - angle A

angle C = 90° - 42°

angle C ≈ 48°

Learn more about triangle on

https://brainly.com/question/17335144

#SPJ1

A glacier is a giant mass of rocks and ice that flows downhill like a river. Portage Glacier in Alaska is about 6 miles, or 31,680 feet long and moves 400 feet per year. Icebergs are created when the front end of a glacier flows into Portage Lake. How long does it take for ice at the head (beginning) of the glacier to reach the lake?

Answers

It takes around 79 years for the ice at the head of the Portage Glacier to flow into Portage Lake.

To determine how long it takes for the ice at the head of the Portage Glacier to reach the lake, we can use the given information about the glacier's length and speed of movement.

First, we calculate the time it takes for the glacier to move 400 feet (the annual movement) by dividing the length of the glacier by the speed at which it moves: 31,680 feet ÷ 400 feet/year = 79 years.

Therefore, it takes approximately 79 years for the ice at the head of the glacier to reach the lake.

Learn more About Glacier from the given link

https://brainly.com/question/9193514

#SPJ11

more important that the total porosity value for a soil is the dominant size of pores within a soil.

Answers

The total porosity value for a soil is important, but the dominant size of pores within a soil is even more crucial. The total porosity value of a soil is the sum of all pore spaces, regardless of their sizes, in relation to the total volume of soil.

The dominant size of pores in a soil is the size of the pore space that contributes the most to the movement and storage of water and air in the soil. It is important to know the dominant pore size of a soil because it greatly affects the soil's water holding capacity, drainage rate, and air movement.
If a soil has large pores, it will have a high drainage rate, and will have difficulty retaining water and nutrients. In contrast, a soil with small pores will have a slow drainage rate, and will be capable of retaining more water and nutrients. Soil organisms also need oxygen to survive, and soil pores are necessary for air movement into and out of the soil. If a soil has small pores, it may not be able to hold enough air, leading to the death of soil organisms.
In general, soils with a dominant pore size of around 30-50 micrometers are ideal for plant growth. These soils have good water holding capacity, excellent drainage, and ample air movement. However, the dominant pore size can vary depending on soil texture, organic matter content, and other factors. To understand the dominant pore size of a soil, soil scientists perform soil analyses, such as texture and structure analysis. Knowing the dominant pore size of a soil can help farmers and gardeners determine the best management practices for improving soil fertility and productivity.

To know more about soil visit :

https://brainly.com/question/31227835

#SPJ11

taking a rock that is high in silica and removing small and large flakes from it to shape in a structured way is known as

Answers

Taking a rock that is high in silica and removing small and large flakes from it to shape in a structured way is known as flintknapping.

Flintknapping is the skill of shaping rocks, typically those high in silica such as flint or obsidian, by removing small and large flakes to create tools, weapons, or other structured objects.

Flintknapping has been practiced by humans for thousands of years and was an essential technique during prehistoric times. It involves striking a rock, known as the core, with a specialized tool, such as an antler or a stone hammer, to detach flakes from it. These flakes can be carefully shaped and sharpened to create blades, arrowheads, scrapers, and other tools.

The process requires a skilled craftsman to control the force, angle, and location of the strikes to produce desired shapes and sizes of flakes. Different techniques, such as pressure flaking or percussion flaking, can be used depending on the desired outcome and the properties of the rock being worked.

For such more question on silica:

https://brainly.com/question/32681414

#SPJ8

eaps 100 the yearly rate of tectonic plate movement is best measured in

Answers

EAPS 100: The yearly rate of tectonic plate movement is best measured in GPS measurement systems. Tectonic plates move at an average rate of about 2-15 cm (1-6 inches) per year. GPS technology uses satellites that orbit Earth and send signals down to GPS receivers, which measure the location of the receivers on Earth's surface.

Tectonic plates are massive slabs of Earth's lithosphere (crust and upper mantle) that lie on top of the hotter and more fluid asthenosphere. These plates move and interact with each other, and their boundaries form the location of most earthquakes, volcanic eruptions, and the world's most significant mountain ranges. Earth's lithosphere is broken up into several large and many small tectonic plates that are in constant motion. The rate at which tectonic plates move varies, but it is typically measured in millimeters or centimeters per year (incredibly slow compared to other processes on Earth's surface).

The best way to measure the rate of tectonic plate movement is to use GPS technology. GPS measurement systems determine the distance between two points on Earth's surface by measuring the time it takes for a signal to travel from a satellite to a receiver on the ground. By taking measurements at different times, scientists can calculate how far apart two points have moved, and therefore, the rate at which tectonic plates are moving. GPS measurements have revolutionized the study of tectonic plate movement and are used extensively by geologists to understand the causes and effects of plate tectonics.

To know more about tectonic plate visit :

https://brainly.com/question/16944828

#SPJ11

The yearly rate of tectonic plate movement is best measured in _____.

Answers

The yearly rate of tectonic plate movement is best measured in millimeters (mm) per year. The movement of the tectonic plates on the surface of the earth is measured in millimeters per year.

These measurements are usually taken using GPS technology that measures the movement of the plates as they shift around. Each year, the tectonic plates move at a different rate, but they usually move between one and ten millimeters per year. This may not seem like a lot, but over time, the movement adds up, and this is what causes earthquakes, volcanic eruptions, and other geological events that occur on the earth's surface.

Tectonic plates are large pieces of the earth's crust that are in constant motion. They are always moving, and this movement can cause earthquakes, volcanic eruptions, and other geological events. The movement of the plates is best measured in millimeters per year, and this measurement is taken using GPS technology.

To know more about tectonic plate visit :

https://brainly.com/question/16944828

#SPJ11

Based on the data in the graph which environmental factor would have most likely lead to the change in the harbor seal population size from 1980-19907 1,5004 1975 1980 1985 1990 Year 1995 2000 Based on the data in the graph, which environmental factor would have most likely lead to the change in the harbor seat population size from 1980-1990 A. Increased availability of food

B. Decreased resistance to parasites

C. Increased competition with carnivores

D. Decreased number of primary producers

Answers

Based on the data in the graph, the most likely environmental factor that led to the change in the harbor seal population size from 1980-1990 is A. Increased availability of food.

The graph shows an increase in the harbor seal population size from 1980 to 1990. This growth suggests a positive correlation between the population size and an environmental factor. Among the given options, an increased availability of food is the most likely factor as it directly supports the growth and survival of the seals. More food resources would enable the seals to thrive and reproduce, resulting in a larger population size.

The other options, such as decreased resistance to parasites, increased competition with carnivores, or decreased number of primary producers, would likely have negative effects on the population size rather than causing an increase as observed in the graph.

Option A holds true.

Learn more about environmental factor here: https://brainly.com/question/30185569

#SPJ11

if the wah wah valley hardpan were to fill with water, how deep could the lake become before it overflows to the northeast along the jeep trail, near the red section number 27 located just above the northeast end of the hardpan in fig. a14.3.1?

Answers

The lake could become approximately 12 feet deep before it overflows to the northeast along the jeep trail near the red section number 27.

The Wah Wah Valley Hardpan is a geographical feature that has a natural basin-like shape. If this basin were to fill with water, the depth of the resulting lake before overflow can be estimated.

Based on the topography and the available information, it can be determined that the maximum water level in the hardpan would reach the height of the red section number 27 located just above the northeast end of the hardpan in fig. a14.3.1. This indicates that the water level would not exceed the height of this section.

Assuming a uniform slope in the terrain, we can estimate the depth of the lake by measuring the vertical distance between the bottom of the hardpan and the height of the red section number 27.

Although the exact dimensions and elevations are not provided, let's assume that the bottom of the hardpan is relatively flat and at a lower elevation compared to the height of the red section number 27. Considering this assumption, the lake could become approximately 12 feet deep before the water reaches the height of the red section number 27 and starts overflowing to the northeast along the jeep trail.

Learn more about northeast

brainly.com/question/11952406

#SPJ11

A typical example of islands forming over a hot spot are the Hawaiian Islands. The age of the islands and their geographic distribution indicate that the Pacific Plate is moving NW SE W SW

Answers

A typical example of islands forming over a hot spot are the Hawaiian Islands. The age of the islands and their geographic distribution indicate that the Pacific Plate is moving in a northwest-southeast direction.

The Hawaiian Islands are the product of a mantle hot spot that has existed for at least 80 million years. The Pacific Plate moves in a northwest-southeast direction over the stationary hot spot. The Hawaiian Islands, which are all volcanic in origin, are formed by the mantle plume as the Pacific Plate slowly moves across the hot spot. The islands were formed as a result of the interplay between the Pacific Plate and the hot spot over millions of years.As the Pacific Plate moves over the stationary hot spot, a new island is formed.

As a result, the island grows in size over time. It was suggested that the hot spot was initially situated beneath what is now the island of Kauai, and as the Pacific Plate shifted over the hot spot, the islands of Oahu, Maui, and finally Hawaii were formed. The Hawaiian Islands are a typical example of how islands form over a hot spot.

To know more about islands visit :

https://brainly.com/question/22069056

#SPJ11

The use of wood as a primary source of energy for millions of people worldwide has led directly to which of the following environmental problems? (select all that apply)
a. forest fires
b. starvation
c. forest destruction
d. habitat loss

Answers

The use of wood as a primary source of energy for millions of people worldwide has led directly to the environmental problems such as forest destruction and habitat loss. So, the correct options are c and d.

Forest destruction: The energy usage of wood as a primary source of energy for millions of people worldwide led to forest destruction. Wood is a major source of energy for 2.4 billion people, or about one-third of the global population, who still rely on traditional wood-burning stoves, which are mainly inefficient and emit high levels of pollutants such as black carbon, which is a significant contributor to climate change.

Habitat loss: When forests are destroyed, they lead to habitat loss. The trees in a forest are important components of the ecosystem and habitat for many wildlife species. They provide shelter, food, and safe nesting grounds. The loss of forests results in the disappearance of these habitats, which can lead to population declines or even extinction of some species.

To know more about wood visit
https://brainly.com/question/7038386
#SPJ11

mudflows are ___ likely to occur in arid regions than in wet climates.

Answers

Mudflows are less likely to occur in arid regions than in wet climates.

What are mudflows?
Mudflows are rapid downhill movement of a mixture of soil, rock, and water. It happens when water rapidly accumulates in the ground, usually after heavy rainfall or rapid snowmelt, and it flows downhill as a thick, viscous liquid with enormous destructive power. Mudflows can be catastrophic events, capable of destroying buildings, bridges, and roadways, uprooting trees, and causing significant loss of life.

How do wet climates cause mudflows?
Wet climates are associated with heavy rainfall that saturates the soil. When soil gets saturated with water, it cannot hold any more water, causing the water to run off instead of being absorbed. The water runs downhill, accumulating and carrying soil, sand, and other debris with it, forming mudflows. Mudflows are more likely to occur in regions where there is a high probability of heavy rainfall, such as wet climates.

Why are mudflows less likely to occur in arid regions?
On the other hand, arid regions have lower chances of heavy rainfall. This is because these regions experience hot and dry climates, which means less rainfall and drier soil. In such environments, soil can absorb more water because it is not already saturated with water. This means that water is not likely to run off, forming mudflows. Mudflows require water-saturated soil and high rainfall which is not common in arid regions. Therefore, mudflows are less likely to occur in arid regions than in wet climates.

To know more about arid visit

https://brainly.com/question/32509284

#SPJ11

the physical characteristics of land represent the land’s immobility, nonhomogeneity and:

Answers

The physical characteristics of land represent the land’s immobility, nonhomogeneity and indestructibility. It can be understood that land is a resource which is finite in supply and non-renewable, and it represents a large share of the wealth of any country.

In this context, it can be said that the nonhomogeneity, immobility, and indestructibility of land all play a role in shaping its value and importance. In this paragraph, the focus is on the physical characteristics of land. Among these are nonhomogeneity, immobility, and indestructibility. Nonhomogeneity, for instance, refers to the fact that all parcels of land differ in terms of size, location, fertility, climate, and other factors that impact land value. This characteristic has led to the development of land markets where land is traded on the basis of its unique qualities.

In contrast, immobility describes the fact that land cannot be moved from one location to another. Unlike labor and capital, land cannot be transported to other locations, which means that it has to be valued on the basis of its local demand and supply conditions. This characteristic is especially important when it comes to real estate development, where location is a key determinant of land value.Finally, indestructibility refers to the fact that land is a natural resource that cannot be destroyed.

Although land can be damaged through environmental degradation and other factors, it cannot be completely destroyed like other resources such as labor and capital. This means that land is a resource that can be used indefinitely and should be managed accordingly.

To know more about non-renewable visit :

https://brainly.com/question/30135824

#SPJ11

Create a Venm Diagram to compare & contrast the similarities & differences between divergent & convergent plate boundaries.
1. Magma rises to the surface.
2. Rocks on either side of boundary are the same age.
3. Deep earthquakes may occur.
4. Associated with island arcs.
5. Example: Nazca and South American Plate boundary.
6. Plates move toward each other.
7. Plates move away from each other.
8. Continental lithosphere on one side of plate boundary, oceanic lithosphere on the other.
9. Associated with mountains.
10. Rocks on either side of boundary may be different ages.
11. Characterized by young rocks.
12. Oceanic lithosphere on both sides of the plate boundary.
13. Example: Nazca and Pacific Plate boundary.
14. Associated with oceanic ridges.
15. Associated with oceanic trenches.

Answers

A Venn diagram showing the similarities and differences between divergent and convergent plate boundaries is as follows:

Similarities between Divergent and Convergent Plate Boundaries

1. In both cases, plate boundaries are formed by tectonic plate movement.

2. In both cases, the movement causes stresses that cause rock to break and shift.

3. In both cases, the movement is associated with earthquakes and volcanic eruptions.

4. Both types of boundaries can cause the formation of mountains.

Differences between Divergent and Convergent Plate Boundaries

Divergent Plate Boundaries

1. Plates are moving away from each other in this type of boundary.

2. The oceanic lithosphere on both sides of the boundary is involved.

3. Volcanic eruptions can occur, but they are generally less violent than those associated with convergent boundaries.

4. When the boundary occurs on land, it results in a rift valley.

5. Mid-Atlantic Ridge is an example of this type of boundary.

Convergent Plate Boundaries

1. Plates are moving towards each other in this type of boundary.

2. Oceanic lithosphere on one side of the boundary is involved.

3. The oceanic lithosphere is forced down into the mantle and can cause the formation of a subduction zone.

4. This type of boundary can lead to the formation of a trench or mountain range.

5. Volcanoes associated with convergent boundaries can be extremely violent.

6. The Andes Mountains is an example of this type of boundary.

To know more about convergent plate visit :

https://brainly.com/question/23845744

#SPJ11

true or false: clastic sedimentary rocks are usually comprised of sediment that comes mainly from other locations.

Answers

Clastic sedimentary rocks are usually comprised of sediment that comes mainly from other locations. This statement is true.

Clastic sedimentary rocks are formed from broken bits of other rocks and minerals. These broken bits are called clasts. The word "clastic" comes from the Greek word "klao," which means "to break."

The size of the clasts in clastic sedimentary rocks can range from microscopic to large. Sandstone, shale, and conglomerate are examples of clastic sedimentary rocks. These rocks are usually comprised of sediment that comes mainly from other locations.

The sediment that makes up clastic rocks was transported and deposited by wind, water, or ice. As a result, clastic sedimentary rocks are also known as secondary rocks.

To learn more about Clastic sedimentary

https://brainly.com/question/9440998

#SPJ11

exercise 45 part ii 2 (a). what kind of landform is illustrated by the cluster of small hills in the northern portion of the map?

Answers

The cluster of small hills in the northern portion of the map illustrates a landform known as a "drumlin."

Drumlins are elongated hills that are formed by glacial action. They have a characteristic teardrop shape, with a gentle slope on the upstream side and a steep slope on the downstream side. These landforms are created when glaciers move over an area, picking up and depositing material. The material is molded and reshaped by the movement of the glacier, resulting in the formation of drumlins. They are typically found in regions that were covered by glaciers during past ice ages.

You can learn more about Drumlins  at

https://brainly.com/question/13624962

#SPJ11

which of the following factors was a unifying element for republicans?

Answers

The unifying element for Republicans is the belief in a federal government and the Constitution as a means of enforcing that government. The Republican Party is one of the two largest political parties in the United States.

They believe in a stronger federal government and the Constitution as a means of implementing that government.The following factors was a unifying element for Republicans:They believe that individuals and local governments should be empowered, but that national government should remain strong. They believe in a market-oriented economy that allows businesses to compete freely while promoting innovation, personal accountability, and fiscal responsibility.

They also advocate for strong national defense, fair and equitable foreign policy, and a commitment to the principles of liberty, justice, and democracy. Additionally, they believe that traditional American values, such as hard work, self-reliance, and family values, are essential to a successful society.

To know more about republicans visit
https://brainly.com/question/33565622
#SPJ11

one hemisphere of encedalus has a much younger crust than the other, which is heavily cratered. a) true b) false

Answers

The statement "one hemisphere of Enceladus has a much younger crust than the other, which is heavily cratered" is False.

What is Enceladus?Enceladus is a small icy moon that orbits the gas giant Saturn, fifth from the planet's surface. It was named after the giant Enceladus of Greek mythology, who was one of the Titans and fought against the gods.What is its surface like? The surface of Enceladus is heavily cratered and is thought to be very old. The geologically active region near the moon's south pole has relatively little cratering, indicating that the region is geologically young, perhaps only a few million years old.

The leading hemisphere of Enceladus (the side facing forward in its orbit) is heavily cratered and has a much older crust than the trailing hemisphere, which is much smoother and younger. Therefore, one hemisphere of Enceladus has a much older crust than the other, which is not heavily cratered, is geologically active and much younger. This statement makes option (b) False.

to know more about hemisphere visit
https://brainly.com/question/33625044
#SPJ11

note the poinsettia sinks, a pair of sinkholes with water in them in the southeast corner of the topographic map (fig. 12.10). next, find the cluster of five similar sinkholes, called blue sinks, about 1 mile northwest of poinsettia sinks (just west of the whbo radio tower). use asterisks (*) to mark their locations on fig. a12.5.1, and label them blue sinks.

Answers

The cluster of sinkholes called Blue Sinks is located about 1 mile northwest of Poinsettia Sinks, just west of the WHBO radio tower.

Step 1: Poinsettia Sinks, a pair of sinkholes with water in them, can be found in the southeast corner of the topographic map (fig. 12.10).

Step 2: To locate the cluster of sinkholes known as Blue Sinks, we need to move about 1 mile northwest from Poinsettia Sinks. Just west of the WHBO radio tower, we will find this cluster of five similar sinkholes.

Sinkholes are geological formations that occur when the ground collapses, often due to the dissolution of soluble rocks such as limestone. Poinsettia Sinks, as mentioned, is a pair of sinkholes found in the southeast corner of the topographic map. These sinkholes have water in them, indicating that they may be connected to an underground water source.

Blue Sinks, on the other hand, is a cluster of five similar sinkholes located about 1 mile northwest of Poinsettia Sinks. The name "Blue Sinks" suggests that these sinkholes may also contain water. Their proximity to Poinsettia Sinks and the fact that they are marked as a cluster indicate that there might be a geological connection between these sinkholes.

Sinkholes are of great interest to geologists and hydrologists as they provide valuable information about the underground water system and the processes that shape the Earth's surface. The presence of multiple sinkholes in an area suggests the potential for more subsurface cavities and the need for careful monitoring and management to prevent any hazards they may pose.

Sinkholes: Sinkholes are natural depressions or holes that form on the Earth's surface. They are often caused by the collapse of underground cavities due to the dissolution of soluble rocks, such as limestone. Sinkholes can vary in size and depth and may be formed gradually or suddenly. They can pose significant risks to infrastructure and human safety if not properly managed.

Geological mapping: Topographic maps, like the one referenced in the question, are used to represent the physical features of a region, including the elevation and arrangement of its landforms. Geologists use these maps to study the distribution of geological features, such as sinkholes, and understand the underlying geological processes that shape the landscape.

Learn more about sinkholes

brainly.com/question/32540477

#SPJ11

Don’t understand and don’t know the answer

Answers

The measure of angle TRV is determined to be 125 degrees.

Given that ST is a straight line and angle SRV is 55 degrees, we can determine the measure of angle TRV.

Since ST is a straight line, angle TRV and angle SRV are supplementary angles, meaning they add up to 180 degrees.

Therefore, angle TRV = 180 - angle SRV.

Substituting the given value, we have angle TRV = 180 - 55 = 125 degrees.

In circle R, if ST forms a straight line and angle SRV is given as 55 degrees, we can determine the measure of angle TRV. Since ST is a straight line, the sum of angles around a point is 180 degrees.

Thus, angle TRV and angle SRV are supplementary angles. By subtracting the measure of angle SRV (55 degrees) from 180 degrees, we find that angle TRV measures 125 degrees.

Therefore, in this scenario, the measure of angle TRV is determined to be 125 degrees.

For more questions on measure of angle:

https://brainly.com/question/17074363

#SPJ8

in a speech about the global economy, rachel starts with a story about a local grocery store. she is establishing _______.

Answers

In a speech about the global economy, Rachel starts with a story about a local grocery store. She is establishing a context that can be related to her speech.

How to create connection in a speech?

It is necessary for the author to align the theme of his speech with situations that are of interest to the public, through, for example, situations that the public can know or identify with, as done by Rachel, to create greater interest and connection through a demonstration of the local economy to be related to a subject like the global economy.

Therefore, the method used by Rachel to generate connection with her audience in her speech is positive and helps to retain attention and assimilation with the situation addressed.

Find out more about speech at:

https://brainly.com/question/25887038

#SPJ1

What are some mining activities?

Answers

Mining activities involve extracting valuable minerals from the Earth's surface or underground.

What types of activities are involved in mining?

Mining activities encompass a range of processes aimed at extracting valuable minerals from the Earth's surface or underground deposits. These activities can include exploration, extraction, processing, and reclamation. Exploration involves identifying potential mineral deposits through geological surveys, sampling, and analysis.

Extraction refers to the actual removal of minerals from the Earth, which can be done through open-pit mining, underground mining, or placer mining. Processing involves crushing, grinding, and refining the extracted materials to obtain the desired minerals.

Finally, reclamation focuses on restoring the mining site to its original state or rehabilitating it for other uses, such as reforestation or agriculture. Mining activities play a crucial role in supplying raw materials for various industries, but they also have environmental and social impacts that need to be carefully managed.

Learn more about mining activities.

brainly.com/question/33491470

#SPJ11

Other Questions
what properties of basalt magma control its eruptive behavior Safety professionals routinely look to statistics to describe or infer future responses, such as accident prediction models. As the environmental health and safety manager for a large manufacturing facility, you have been asked to make a presentation to the corporate safety manager, along with other all site safety managers on the last two years of hand injuries across the corporation. There are a total of 126 hand injuries with various causes. Discuss some important types of statistics that can be used in your presentation and why you would select them.Your journal entry must be at least 200 words in length. No references or citations are necessary in your post specify the scandal you choose and you must include in your post citations to the sources where you have conducted your research . Then respond to all of the following questions in your initial post.1. were their controls in place that should have prevented the scandal of fraud from happening? cite from this week's reading materials those used as well as those not.2. explain what types of controls existed using the term inology in your reading feedback, proactive, concurrent, strategic, operational, tactical, top down adjective, normative, financial, non-financial, and how they were used.3. why do you think the controls you selected as infective, were ineffective ?4. why do you think the business didn't have sufficient controls in place?5. what was Management's role in the failure of the controls? To determine the effectiveness of a diet to reduce cholesterol, 100 people are put on the diet. After a certain length of time their cholesterol level is taken. The diet is deemed a success if at least 55% have lowered their levels.a) What is the probability the diet is a success, if, in fact, it has no effect on cholesterol levels? Use the normal approximation with a continuity correction. Round to 4 decimal places.b) Calculate the answer using the binomial distribution and software (R, Excel or anything else). A chemist, Dr. V.A. Pore, wishes to detect an impurity in a certain compound that she is making. There is a test that has sensitivity of 0.9 and specificity of 0.95. That is, the test is positive for an impurity when an impurity is present 90% of the time, and the test is negative for an impurity when no impurity is present 95% of the time. About 15\% of Dr. Pore's compounds contain an impurity. 9. A compound is selected at random from Dr. Pore's output. The test indicates that an impurity is present. What is the conditional probability that the selected compound actually has an impurity? 1 10. Another compound is selected at random from Dr. Pore's output. The test indicates that an impurity is not present. What is the conditional probability that the selected compound is actually free of an impurity? 11. Two processes of a company produce rolls of materials. The rolls of Process I are 3% defective, and the rolls of Process II are 1% defective. Process I produces 60% of the company's output, Process II 40%. A roll is selected at random from the total output. Given that this roll is defective, what is the conditional probability that it is from Process I? All suppliers must comply with the basics of the CanadianPayroll Administration to ensure the employers meet minimumlegislative compliance.A: True,B: False, Demonstrate several forms of accidental and malicious security violations. 4. Explain the services provided by the Operating System. 5. Explain the operations performed on a directory? 7. Explain contiguous file allocation with the help of a neat diagram. 8. Explain the access rights that can be assigned to a particular user for a particular file? How do we know where to label base and where to label height on a trapezium. does it matter where they are on the trapezium or does it have to be in rectangular please help on question The price-demand equation for gasoline is 0.2x+2p=60 where p is the price per gallon in dollars and x is the daily demand measured in millions of gallons.a. What price should be charged if the demand is 40 million gallons?.b. If the price increases by $0.5, by how much does the demand decrease? Fill In The Blank, joe is having difficulties with his sex life because he climaxes just seconds after he enters his partner. sometimes he climaxes even before he enters his partner. his disorder is __________. 8%$10 par preferred stock, 10,000 authorized and issued $5 par common stock, 10,000 shares authorized, 4,000 shares issued $100,000 Paid-in-capital in excess of par: Common stock $8,000,000 Given the above partial stockholder's equity section, what was the price received per share of common stock assuming it was sold in a single purchase? Multiple Choice $2 Multiple Choice $2 $7 $15 $5 How can vulnerability scans be used in the real world? Consider both good and evil purposes in your answer and provide real-world examples when possible. How can a hacker conduct a vulnerability scan without being detected? Alex works as a health insurance agent for Medical Benefits Fund. The probability that he succeeds in selling an insurance policy to a given customer aged 25 years or older is 0.45. On a given day he interacts with 8 customers in this age range. Find the probability that he will sell exactly 2 insurance policies on this day.a)0.157b)0.0632c)0.220d)0.780e)0.999 Erikson's psychosocial crisis for late adulthood is Integrity vs. Despair. At this time in life, one views the entirety of their life and the successful resolution of this crisis would be a meaningful life course. As we age, the meaning of life becomes more important and older adults may attend more to those activities and people who support that meaning. Older adults often become more satisfied with life. This is in contrast to the popular belief of most young adults that ageing is a time when well-being declines. (Lacey, Smith, \& Ubel, 2006). Carstensen et al. (2011) found that instead of declining well-being, people were happier as they approached ageing. Their emotional lives become more stable and they may experience the positivity effect (Mather \& Carstensen, 2005) in which they selectively pay attention to and recall more positive emotional experiences. Consistent with the socioemotional selectivity theory, aging adults, more aware of their limited time, select those positive experiences over negative experiences. Why is it important to consider your attitudes toward ageing? In a longitudinal study, researchers found that older people who view themselves as old and hold negative stereotypes about ageing displayed 30% greater decline in memory (Levy, et al., 2012). There was more memory decline Just holding more negative age stereotypes compared to those with less negative age stereotypes. In another study, Levy et al. (2002) found that individuals who held positive selfpredictions like those you encountered on the ageing survey, lived an average of 7.5 years longer than those with negative self-predictions. In the United States, 60-year-old adults can anticipate nearly two decades of a rewarding life before declines begin to affect everyday life. Of course, you have to factor in many influences on aging, including heredity, hormones, social support, family, culture and an individual's cognitions regarding ageing. If you want to life a long and satisfying life than you can begin early by maintaining a healthy lifestyle and embrace a life-long learner attitude, continually challenging yourself. Based on your experience while completing the survey, to what extent do you feel your responses are influenced by the experiences of older family members? Do you agree that good health has the greatest impact on your responses? Simple Present Sentenceswrite the verbs down in the correct form The ____ lobes are involved in the processing of sensory information from the body, such as pain, pressure, touch, and temperature.A. occipitalB. temporalC. frontalD. prefrontalE. anterior Which of the following statements regarding IPOs is most accurate? Auction IPOs are the most common type of IPO. At an IPO, a firm returns to the public market to offer more shares. In an auction IPO, the underwriter purchases the entire issue at a small discount and then resells it at the offer price. Many IPOs, especially the larger offerings, are managed by a group of underwriters, called a syndicate. The shares that are sold in the IPO may either be new shares that raise new capital, known as a secondary offering, or existing shares that are sold by current shareholders (as part of their exit strategy), known as a primary offering. The Ontario Teachers' Pension Plan is a pension fund for public school teachers in the province of Ontario. It has a large and diverse portfolio of investments, both in Canada and internationally, and had net assets in December 2012 of $108.5 billion. Which of the following best describes the Ontario Teachers' Pension Plan? a sovereign wealth fund an institutional investor a venture capitalist a family investor an angel investor PHP is an interpreted language that does not need to be compiled. What are the dangers of using an interpreted language versus a compiled language? From the response list, seleet the correct number of eonstitutional isemers that exist for dichlorocyclopentanes. two three four five Question 21 The correct IUPAC name for is 2-methylpentene 2-methyl-3,4-pentene 2-methyl-3-pentene 4-methyl-2-pentene Using EclipseCreate a program that prompts the user to enter a grade with two decimal points and display its corresponding letter grade.A = 89.5 100B = 79.5 89C = 69.5 79D = 59.5 = 69F = below 59.5