streaming is a publishing method for music and video files that flows a continuous stream of content to a user's device without being stored locally on the device.

To achieve the desired HTML structure, we need to insert an h2 element within the rental div, add a table element below the h2 element, and include a caption element with the text "Rental Rates."

First, we locate the rental div using appropriate selectors or JavaScript methods. Then, we insert the h2 element within the div using the createElement method and set its text content to "We rent many different kinds of musical equipment. See our rental rates below."

Next, we create the table element using the createElement method and append it as a child of the rental div. We also create a caption element using createElement, set its text content to "Rental Rates," and append it as a child of the table element.

By following these steps, we can achieve the desired HTML structure with the h2 element, table element, and caption element nested within the rental div.

Learn more about HTML elements here:

https://brainly.com/question/15093505

#SPJ11

the Optional port on the NSA for LAN and set up the LAN ports as a DHCP server with the given parameters.

1. the configuration interface of the NSA device.2. Locate the settings for the Optional port and ensure it is enabled for LAN.

3. Go to the DHCP server settings.4. Configure the DHCP server with the following parameters:

  - Starting IP Address: 198.28.1.100   - Ending IP Address: 198.28.1.250

  - Primary DNS server address: 163.128.78.93   - Secondary DNS server address: 163.128.80.93

5. Save the changes and apply the configuration.

To configure the Optional port on the NSA (Network Security Appliance) for LAN, you need to access the device's configuration interface. This interface allows you to manage various settings and configure the network.

Once you're in the configuration interface, you should locate the settings specifically for the Optional port. Ensure that it is configured to act as a LAN port, as opposed to other possible modes like WAN (Wide Area Network) or DMZ (Demilitarized Zone).

Next, find the DHCP server settings, which allow you to allocate IP addresses dynamically to devices on the LAN. Configure the DHCP server with the provided parameters:

- Starting IP Address: 198.28.1.100

- Ending IP Address: 198.28.1.250- Primary DNS server address: 163.128.78.93

- Secondary DNS server address: 163.128.80.93

These settings define the range of IP addresses that will be assigned to devices connecting to the LAN through the NSA's LAN ports. Additionally, the DNS server addresses specify the primary and secondary servers that will be provided to the connected devices for name resolution.

After configuring the DHCP server with the desired parameters, remember to save the changes and apply the configuration for them to take effect.

Learn more about server   here:

 https://brainly.com/question/30558112

#SPJ11

The three items commonly located in a system unit are the motherboard, CPU (Central Processing Unit), and RAM (Random Access Memory).

The motherboard is the main circuit board of the computer system unit. It provides the foundation for connecting and integrating various hardware components, including the CPU, RAM, and other peripherals.

The CPU, or Central Processing Unit, is the primary component responsible for executing instructions and performing calculations in a computer system. It is often referred to as the "brain" of the computer.

RAM, or Random Access Memory, is a type of computer memory that is used for temporary storage of data that is actively being processed by the CPU. It provides fast access to data and allows for quick retrieval and manipulation of information.

These three components are essential for the functioning of a computer system. The motherboard acts as a platform for connecting and facilitating communication between the CPU and RAM, which together enable the execution of tasks and running of software applications.

To learn more about the system visit:

brainly.com/question/1763761

#SPJ11

The correct answer is **b. false**.

Hovering over a section name in the table of contents and clicking the arrow next to it does not typically open the section in edit mode. Instead, it usually expands or collapses the section to display or hide its subsections or content.

In most cases, clicking the section name itself, rather than the arrow, will navigate to that specific section, allowing you to view its content. To edit the section, you would usually need to enter an edit mode explicitly, such as by clicking an "Edit" button or accessing an editing feature within the interface.

The purpose of the arrow next to a section name in the table of contents is typically to provide a collapsible or expandable functionality, allowing users to easily navigate through different sections of a document or webpage without directly entering edit mode.

To know more about Hovering, visit

https://brainly.com/question/890580

#SPJ11

False. The input function in most programming languages returns a string value by default, not a numeric value.

The input function is commonly used to receive user input in programming languages such as Python. By default, it reads the user's input as a string and returns it. If you want to use the input as a numeric value, you need to explicitly convert it using functions like int() or float(). For example:

python

age = input("Enter your age: ")

print(type(age))  # This will output <class 'str'>

# Converting the input to an integer

age = int(age)

print(type(age))  # This will output <class 'int'>

It's important to handle user input carefully and validate it before converting it to a numeric type to avoid potential errors if the input is not a valid number.

Learn more about python  here:

 https://brainly.com/question/30391554

#SPJ11

The Hyatt Regency Portland at the Oregon Convention Center is a hotel located in Portland, Oregon, adjacent to the Oregon Convention Center.

However, as of my knowledge cutoff in September 2021, the hotel was still under construction and had not yet opened.

Therefore, I may not have up-to-date information on the current status of the hotel.

I recommend checking with the official Hyatt website or contacting the hotel directly for the most recent information regarding its opening and availability.

Learn more about Hyatt Regency Portland here:

https://brainly.com/question/30331353

#SPJ11

Answer: host

Explanation:

A server that provides data transfer and storage space at remote locations is known as a host. A host server is a computer or system that offers services such as data storage, file sharing, and network connectivity to clients or users over a network. It acts as a central hub for managing and distributing resources and data to connected devices or users. In the context of remote data transfer and storage, a host server enables users to store and access their data from remote locations, often through the Internet.

A server that provides data transfer and storage space at remote locations is known as a host.

Thus the correct option is C.

Here,

In the context of computers and technology, a server refers to a computer or system that provides services or resources to other computers or devices connected to a network. It acts as a central hub that facilitates data transfer, storage, and other functionalities.

A host server is responsible for hosting or providing services such as data storage and transfer to clients or users over a network, typically over the internet.

Additionally, it allows users to transfer their data to and from the host server, enabling remote data access and management.

Therefore, a server that provides data transfer and storage space at remote locations is known as a host server.

Thus option C is correct.

Know more about server,

https://brainly.com/question/29888289

#SPJ6

To list information on all the classes that Pitt Fitness offers, including the day of the week, time, location, and length of class, you would need to include the "classes" table in your query.

If you use only the "classes" table without combining it with other tables, it may limit the available information in the output. If someone has never reserved a specific class, it may result in missing information for that particular class in the output.

To gather information on all the classes offered by Pitt Fitness, the primary table to include in the query would be the "classes" table. This table likely contains the relevant details such as the day of the week, time, location, and length of each class. By querying this table, you can retrieve the desired information.
However, if you solely use the "classes" table without combining it with other related tables, such as a "schedule" table or an "instructors" table, it may limit the available information in the output. These additional tables could provide additional details about the classes, such as the instructor's name or the specific room where the class is held. Including these tables in the query can enhance the completeness of the information presented.
If someone has never reserved a specific class, it means that there might not be any corresponding reservation data for that particular class. In this case, when querying the reservation-related tables, the output may not include any reservation information for that class. It's important to handle such cases gracefully in the output to avoid confusion or misinterpretation.

Learn more about Pitt Fitness here
https://brainly.com/question/28902463



#SPJ11

City Tours Ltd. engages in creating and modifying tables and other database objects as part of its operations. This process involves designing and implementing the structure of a database by defining tables, columns, relationships, and other relevant attributes.

Creating tables involves specifying the table name, column names, data types, and any constraints or rules that need to be applied. It is essential to carefully plan and organize the table structure to accurately represent the data that will be stored and manipulated.

Modifying tables includes altering existing tables to add or remove columns, modify data types, add constraints, or change other properties of the table. This process ensures that the database evolves and adapts to changing business requirements or data management needs.

In addition to tables, City Tours Ltd. may also create and modify other database objects such as views, indexes, stored procedures, and triggers. These objects enhance data retrieval, performance, and data integrity within the database system.

By effectively creating and modifying tables and other database objects, City Tours Ltd. can efficiently manage and store its data, enabling streamlined operations, accurate reporting, and effective decision-making.

To know more about retrieval , visit

https://brainly.com/question/29371932

#SPJ11

The correct answer is: D) All of the above. Although Microsoft Access is a personal database management system.

It is still subject to the modification problems mentioned, which include problems adding data, changing data, and deleting data. These modification problems can occur in any database system, regardless of its size or purpose. Microsoft Access allows users to create and manage databases, and while it may be primarily used for personal or small-scale applications, it is still susceptible to data modification issues that can arise during the process of adding, changing, or deleting data. It is still subject to the modification problems mentioned, which include problems adding data, changing data, and deleting data. These modification problems can occur in any database system, regardless of its size or purpose.

Learn more about data :

https://brainly.com/question/31680501

#SPJ11

Photographers create a wide or narrow view by adjusting the "focal length" of the camera lens.

The focal length of a camera lens is a crucial parameter that determines the angle of view and perspective in photography. It plays a significant role in creating either a wide or narrow view in an image.

A lens with a shorter focal length provides a wider angle of view, allowing the photographer to capture a broader scene. It is commonly referred to as a wide-angle lens. Wide-angle lenses are often used in landscape photography, architectural photography, and situations where the photographer wants to include more elements in the frame.

On the other hand, a lens with a longer focal length provides a narrower angle of view, resulting in a more zoomed-in or magnified image. These lenses are known as telephoto lenses.

Telephoto lenses are commonly used in sports photography, wildlife photography, and situations where the photographer wants to isolate and focus on a specific subject or compress the perspective.

By adjusting the focal length of the camera lens, photographers have control over the width of the captured scene, allowing them to create either a wide or narrow view based on their creative intent and the desired composition.

Learn more about parameter here:

https://brainly.com/question/17036570

#SPJ11

True. A network requires at least three computers and a shared resource.

In order to establish a network, a minimum of three computers and a shared resource are necessary. A network enables the computers to communicate and share information, files, or services with each other. The shared resource could be a printer, a file server, an internet connection, or any other component that can be accessed and utilized by multiple computers within the network. Having at least three computers allows for connectivity and interaction between multiple nodes, creating a networked environment where data can be transmitted and shared.

Learn more about network here:

https://brainly.com/question/29350844

#SPJ11

Loading a macro typically involves accessing the macro functionality within the software or platform you are using and selecting or importing the desired macro file.

Macros are sets of recorded or programmed actions that can automate repetitive tasks or perform complex operations. To load a macro, you need to have a macro file available, which contains the recorded or programmed actions. In many software applications, you can access the macro functionality through a dedicated menu or toolbar option. Once you access the macro functionality, you can typically choose to load or import a macro file. This process may involve browsing your computer's file system to locate the macro file you want to load. It's important to note that the steps and terminology may vary depending on the specific software or platform you are using. Some applications may use terms like "import," "run," or "execute" instead of "load." Additionally, certain software may have specific file formats for macros.

Learn more about software here:

https://brainly.com/question/32237513

#SPJ11

Here's an example program in assembly language (x86) that s an extra character in a string:

assemblysection .data

   str1 db " good morrning",0

section .text    global startstart

   ; Find the length of the string    mov esi, str1

   xor ecx, ecx    mov al, byte [esi]

   cmp al, 0    je extrachar

   inc ecx

   ; Loop through the string until the null terminator is reachedloopstart

   inc esi    mov al, byte [esi]

   cmp al, 0    jne loopstart    inc ecx

   ; Correct the extra characterextrachar:

   mov edi, esi    dec edi

   mov byte [edi], 0

   ; Print the ed string    mov eax, 4

   mov ebx, 1    mov edx, ecx

   mov ecx, str1    int 0x80

   ; Exit the program

   mov eax, 1    xor ebx, ebx

   int 0x80This program s the extra character in the string "good morrning" by removing the last occurrence of the letter 'r'.

mov byte [edi], 0

   ; Print the ed string    mov eax, 4

   mov ebx, 1    mov edx, ecx

   mov ecx, str1    int 0x80

   ; Exit the program

   mov eax, 1    xor ebx, ebx

   int 0x80This program s the extra character in the string "good morrning" by removing the last occurrence of the letter 'r'. It first finds the length of the string by looping through it until the null terminator is reached. Then, it decrements the pointer to the extra character and replaces it with a null terminator, effectively removing it. Finally, it prints the ed string using the write system call and exits the program.

Please note that this program is written in assembly language, so it needs to be assembled and executed on an appropriate platform or emulator. The specific steps to assemble and run the program depend on the assembler and operating system you are using.

Learn more about string here:

https://brainly.com/question/30281871  

#SPJ11

The correct answer is d) all of the above. The pthreads API (POSIX threads) provides a set of functions for creating and managing threads in a multithreaded program. The functions mentioned in the options—pthread_attr_init, pthread_create, and pthread_join—are all part of the pthreads API and serve different purposes in constructing a multithreaded program.

Here's a brief explanation of each function:

a) pthread_attr_init: This function is used to initialize a thread attribute object. The thread attribute object allows you to specify various attributes for a thread, such as its stack size, scheduling policy, and detach state. Initializing the attribute object is the first step before setting specific attributes using other pthread_attr functions.

b) pthread_create: This function is used to create a new thread. It takes several parameters, including a pointer to a thread ID, a thread attribute object (which can be NULL for default attributes), a start routine (the function that the thread will execute), and an optional argument to pass to the start routine. When called, pthread_create creates a new thread that will begin executing the specified start routine.

c) pthread_join: This function is used to wait for a thread to terminate and obtain its exit status. When a thread is created using pthread_create, the calling thread can use pthread_join to wait for the created thread to finish execution. This function ensures that the calling thread does not proceed further until the joined thread has completed its execution.

By utilizing these pthreads functions, a programmer can effectively create, manage, and synchronize multiple threads within a multithreaded program. Each function serves a specific purpose in the overall construction and coordination of threads, making them fundamental components of the pthreads API.

Learn more about pthreads here:

https://brainly.com/question/28901733

#SPJ11

The program allocates memory for a sequence of 3m arrays of size 1 MB each, deallocates all even-numbered arrays, and then allocates a sequence of m arrays of size 1.4 MB each. The time measurements are taken for the allocation of the 3m arrays, deallocation of the even-numbered arrays, and allocation of the m arrays. The goal is to determine the value of m that exhausts almost all available main memory.

To determine the timings and the appropriate value of m, we need to consider memory fragmentation and the available main memory. Memory fragmentation refers to the non-contiguous allocation of memory blocks, which can reduce the efficiency of memory usage.
The program initially allocates memory for a sequence of 3m arrays of size 1 MB each. This step requires allocating a contiguous block of memory for the arrays, which may be affected by existing memory fragmentation. The time taken for this allocation depends on the available free memory and the efficiency of the memory allocation algorithm used by the system.
Next, the program deallocates all even-numbered arrays, resulting in the creation of fragmented memory blocks. Deallocation involves marking the memory blocks as free, allowing them to be reused in subsequent allocations. The time taken for deallocation depends on the number of arrays being deallocated and the efficiency of the deallocation algorithm.
Finally, the program allocates a sequence of m arrays of size 1.4 MB each. Since the size of the new arrays is larger than the previous ones, it may result in additional memory fragmentation if the remaining free memory is not contiguous or if there are insufficient contiguous blocks of the required size. The time taken for this allocation depends on the availability of contiguous free memory blocks.
By varying the value of m, the program can exhaust almost all available main memory. The timings for each step will help determine the impact of memory fragmentation on the allocation and deallocation processes, as well as the effectiveness of the memory management algorithm employed by the system.

Learn more about deallocates here
https://brainly.com/question/32507533

#SPJ11

The logical address 0001000010111110, under the given segmentation system, corresponds to a decimal physical address of 34,758.

In a segmentation system, the logical address is divided into two parts: the segment number and the offset within the segment. The segment number determines the base address of the segment in the physical memory.

Given that the segment table bases are regularly placed at real addresses using the formula 22 * 8,192 * segment number, we can calculate the base address for the segment number extracted from the logical address.

From the given logical address 0001000010111110, the segment number is 0001 (binary). Converting the segment number to decimal, we get 1.

Using the formula, the base address for segment number 1 is calculated as 22 * 8,192 * 1 = 34,608 (decimal).

Adding the offset portion of the logical address, which is 000010111110 (binary), converted to decimal as 62, the physical address is obtained by adding the base address and the offset: 34,608 + 62 = 34,670.

Therefore, the binary translation of the logical address 0001000010111110 corresponds to the decimal physical address 34,670.

Learn more about logical address here:

https://brainly.com/question/23862371

#SPJ11

The tool used to remove computer identification information from a Microsoft OS is the "sysprep" utility.

This utility is built into Windows operating systems and is primarily used to prepare an installation of Windows for cloning or imaging. Sysprep removes unique system information such as computer name, security identifiers (SIDs), and other hardware-specific settings to ensure that cloned or imaged systems can be deployed without conflicts. It helps in creating a generalized image that can be deployed to multiple computers with different hardware configurations.

Learn more about security identifiers (SIDs) here:

https://brainly.com/question/31689232

#SPJ11

The statement to add a shadow to a picture, click the picture border button is False. The specific steps to add a shadow may vary depending on the software or editor being used

To add a shadow to a picture, you typically need to access specific options or effects settings within image editing software or a graphics editor. Simply clicking the picture border button would not directly add a shadow to the picture. The picture border button is typically used to modify the border or frame around the picture, such as changing its color, thickness, or style. Adding a shadow to a picture involves applying a shadow effect to the image, which usually requires accessing dedicated shadow settings or tools within the editing software.

To know more about software, visit:

https://brainly.com/question/32393976

#SPJ11

Answer:

Moly

I hope this helps...

Please mark me Brainliest.

Have a nice day! <3

The correct answer is a. subfolder.

A folder created inside another folder is commonly referred to as a subfolder. It is a way to organize files and folders within a hierarchical structure. The parent folder contains one or more subfolders, creating a nested or hierarchical arrangement.

Subfolders provide a means to further categorize and group related files or folders within a parent folder. This hierarchical organization aids in maintaining a well-structured and easily navigable file system.

The term "child folder" (option c) is also used to describe a folder that is contained within another folder, but "subfolder" is the more commonly used term. "Zip" (option b) refers to a compressed file format, while "library" (option d) typically denotes a collection of resources or files related to a specific purpose, often used in software development contexts.

To know more about navigable, visit

https://brainly.com/question/32343228

#SPJ11

To dynamically allocate and fill a 2D array of integers with a multiplication table, you can use the following code snippet:

cpp

#include <iostream>

// Function to get size from user

int getSizeFromUser() {

   int size;

   std::cout << "Enter size: ";

   std::cin >> size;

   return size;

}

// Function to dynamically allocate and fill the multiplication table

int** createMultiplicationTable(int sizex, int sizey) {

   int** table = new int*[sizey]; // Allocate memory for rows

   // Allocate memory for each row and fill with multiplication values

   for (int i = 0; i < sizey; i++) {

       table[i] = new int[sizex]; // Allocate memory for columns

       for (int j = 0; j < sizex; j++) {

           table[i][j] = (i + 1) * (j + 1); // Fill with multiplication values

       }

   }

   return table;

}

// Function to print the multiplication table

void printMultiplicationTable(int** table, int sizex, int sizey) {

   for (int i = 0; i < sizey; i++) {

       for (int j = 0; j < sizex; j++) {

           std::cout << table[i][j] << "\t"; // Print each value

       }

       std::cout << std::endl; // Move to the next row

   }

}

int main() {

   int sizex = getSizeFromUser();

   int sizey = getSizeFromUser();

   int** multiplicationTable = createMultiplicationTable(sizex, sizey);

   printMultiplicationTable(multiplicationTable, sizex, sizey);

   // Deallocate memory

   for (int i = 0; i < sizey; i++) {

       delete[] multiplicationTable[i];

   }

   delete[] multiplicationTable;

   return 0;

}

In this code, the createMultiplicationTable function dynamically allocates memory for a 2D array with the given sizex and sizey dimensions.

(int j = 0; j < sizex; j++) {

           std::cout << table[i][j] << "\t"; // Print each value

       }

       std::cout << std::endl; // Move to the next row

   }

}

int main() {

   int sizex = getSizeFromUser();

   int sizey = getSizeFromUser();

   int** multiplicationTable = createMultiplicationTable(sizex, sizey);

   printMultiplicationTable(multiplicationTable, sizex, sizey);

   // Deallocate memory

   for (int i = 0; i < sizey; i++) {

       delete[] multiplicationTable[i];

   }

   delete[] multiplicationTable;

   return 0;

}

In this code, the createMultiplicationTable function dynamically allocates memory for a 2D array with the given sizex and sizey dimensions. It then fills the array with multiplication values. The printMultiplicationTable function is used to print the generated table. Finally, in the main function, the user is prompted to enter the sizes, and the functions are called accordingly. Memory deallocation is done at the end to free the dynamically allocated memory.

Learn more about 2D array here:

https://brainly.com/question/30689278  

#SPJ11

To execute processes concurrently in Python, you can make use of the multiprocessing module, which provides functionality for spawning processes.

Here's

example that demonstrates how to fork processes to execute concurrently:

pythonimport multiprocessing

def process₁):

   # Code for process 1

def process₂):    # Code for process 2

def process₃):

   # Code for process 3

if name == 'main':    # Create Process objects for each process

   p1 = multiprocessing.Process(target=process₁    p2 = multiprocessing.Process(target=process₂

   p3 = multiprocessing.Process(target=process₃

   # Start the processes    p1.start()

   p2.start()    p3.start()

   # Wait for all processes to complete

   p1.join()    p2.join()

   p3.join()In this example, process₁ process₂ and process₃are placeholder functions that represent the actual processes you want to execute concurrently. You should replace them with the code for your specific processes.

The multiprocessing.Process class is used to create a process object for each process, specifying the target function to be executed. The start() method is called on each process object to start the processes. The join() method is then used to wait for all processes to complete.

By starting the processes using start() and waiting for them to complete using join(), the processes will run concurrently, allowing them to execute at the same time.

Learn more about python here:

https://brainly.com/question/30391554  

#SPJ11

InQuizitive provides various types of feedback to support your learning. These types of feedback can include both correct and incorrect responses. When you interact with a question, InQuizitive will provide you with immediate feedback in a pop-up window. The feedback will inform you whether your response is correct or incorrect, allowing you to gauge your understanding of the topic.

If your response is correct, the feedback may provide positive reinforcement and congratulate you on your accurate answer. It may also provide additional explanations or information to reinforce your understanding of the concept.

If your response is incorrect, the feedback will gently guide you towards the correct answer. It may explain why your response is incorrect and provide insights or hints to help you arrive at the correct answer. The feedback is designed to help you learn from your mistakes and deepen your understanding of the topic.

InQuizitive encourages you to do your best and view incorrect responses as opportunities for learning and improvement. By reading and understanding the feedback provided, you can enhance your knowledge and be better prepared for future questions.

For more such answers on InQuizitive

https://brainly.com/question/14408521

#SPJ8

The big-O complexity to determine whether a particular student is enrolled in a course in the given vector of pairs is O(n), where n represents the total number of pairs (courses) in the vector.

To determine whether a particular student "s" is enrolled in a course "c" in the vector of pairs, a linear search is required. The algorithm needs to iterate through each pair in the vector to check if the course matches the given course "c" and if the student "s" is present in that pair. This process has a time complexity of O(n), where n is the total number of pairs (courses) in the vector.
In the worst case scenario, if the student is not enrolled in any of the courses or if the given course is not present in the vector, the algorithm will need to iterate through all the pairs in the vector. However, if the desired course is found or if the student is enrolled in that course, the algorithm may terminate early. Nevertheless, the overall complexity for determining enrollment remains O(n) as it scales linearly with the number of pairs in the vector.

learn more about big-O-complexity here

https://brainly.com/question/31967645



#SPJ11

Jane's savings (J) is approximately R87.37. Jane saved approximately R87.37 and Tim saved approximately R132.63.

Let's denote Jane's savings as J and Tim's savings as T. We are given the following information:

1. Jane wants to take 5th (1/5) of her savings.

2. After taking 1/5 of her savings, Jane wants to take a quarter (1/4) of Tim's savings.

3. Together, after these withdrawals, they will have R50.

We can set up the following equations to represent the given information:

1. J - (1/5)J - (1/4)T = 50   (Equation 1)

2. J + T = 220                 (Equation 2)

Let's solve these equations to find the values of J and T.

From Equation 2, we can express J in terms of T:

J = 220 - T

Substituting this value of J in Equation 1:

(220 - T) - (1/5)(220 - T) - (1/4)T = 50

Simplifying the equation:

220 - T - (44 - 1/5T) - (1/4)T = 50

220 - T - 44 + 1/5T - (1/4)T = 50

176 - T + (1/5 - 1/4)T = 50

176 - T + (4/20 - 5/20)T = 50

176 - T - (1/20)T = 50

(19/20)T = 126

T = (126 * 20) / 19

T = 132.63 (approx.)

So, Tim's savings (T) is approximately R132.63.

Substituting this value of T in Equation 2 to find Jane's savings (J):

J + 132.63 = 220

J = 220 - 132.63

J = 87.37 (approx.)

Therefore, Jane's savings (J) is approximately R87.37.

In conclusion, Jane saved approximately R87.37 and Tim saved approximately R132.63.

Learn more about saved here

https://brainly.com/question/29032371

#SPJ11

The correct answer is **C. Smurf attack**.

A Smurf attack is a type of Denial of Service (DoS) attack where an attacker sends a large number of Internet Control Message Protocol (ICMP) packets with a modified return address to the broadcast network address. The attacker spoofs the source IP address, making it appear as if the packets are originating from the victim's IP address.

When the ICMP packets are sent to the broadcast network address, all the devices within that network receive and process the packets, resulting in a flood of responses being sent back to the victim's IP address. This overwhelms the victim's network and causes a Denial of Service, as the victim's resources are consumed in processing the flood of incoming traffic.

SYN flood (option A), Ping of Death (option B), and UDP flood (option D) are also types of DoS attacks, but they do not involve sending ICMP packets with a modified return address to the broadcast network address like the Smurf attack does.

To know more about  ICMP , visit

https://brainly.com/question/32155395

#SPJ11

The statement that makes a shallow copy of the object origObj to the new object newObj by creating a copy of the data members' values only without calling a Copy Constructor is:a. newObj = origObj

This statement assigns origObj to newObj, creating a shallow copy. Both origObj and newObj will refer to the same memory location, and any changes made to the data members of origObj will be reflected in newObj and vice versa. It does not involve creating a new object or calling a copy constructor explicitly.

Learn more about shallow copies here:

https://brainly.com/question/32558754  

#SPJ11

Step 3 of the research process is data collection.

It involves gathering information and evidence to  research questions or test hypotheses. It is important because data collection provides empirical support for research findings and ensures the reliability and validity of the study.

Data collection is a crucial step in the research process. Once a research question or hypothesis is formulated, the next step is to collect data that will help  that question or test the hypothesis. Data collection involves gathering information, facts, and evidence from various sources, such as surveys, interviews, observations, experiments, or existing datasets.

The importance of data collection lies in its role in providing empirical support for research findings. By collecting data, researchers obtain concrete evidence that supports or refutes their hypotheses. This empirical support enhance  the credibility and validity of the research.

Data collection also ensures the reliability of the study. It involves using systematic and standardized methods to collect data, ensuring consistency and accuracy. This allows other researchers to replicate the study and verify its findings, promoting transparency and trust within the scientific community.

Furthermore, data collection helps in generating insights and drawing meaningful conclusions. It allows researchers to analyze patterns, trends, and relationships within the data, leading to a deeper understanding of the research topic. These insights can then be used to make informed decisions, develop theories, or propose solutions to practical problems.

In summary, step 3 of the research process, which is data collection, is crucial because it provides empirical support for research findings, ensures the reliability of the study, and enables researchers to generate insights and draw meaningful conclusions.

Learn more about enhance here:

https://brainly.com/question/14291168

#SPJ11

According to the given encryption rule e(m) = m + 23, to encrypt the letter 'y' where 'y' represents 24, the encrypted value would be 24 + 23 = 47. However, since the encryption is based on the alphabet where A=0, B=1, ..., Z=25, we need to take the modulus of the result with 26 to obtain the corresponding encrypted letter.

The letter 'y' corresponds to the value 24. Applying the encryption rule e(m) = m + 23, we get 24 + 23 = 47. To obtain the encrypted letter, we need to take the modulus of 47 with 26 (the number of letters in the alphabet), which gives us 47 mod 26 = 21.
Since A=0, B=1, C=2, and so on, the letter corresponding to the value 21 is 'V'. Therefore, 'y' would be encrypted as 'V'.
The correct answer is:
b. V

Learn more about encryption here
https://brainly.com/question/31831935



#SPJ11