Suppose you have the following data: x 1 2 3 4 5 6 y 24 29 26 40 26 42 and the lsrl is y^=2.714x 21.67. find the residual value for x = 2.

In the Bertrand Duopoly Competition, choosing a price of $0 is a dominated strategy for each firm because they can always earn a higher profit by setting a positive price. Similarly, setting a price of $6 is also a dominated strategy for both firms. Choosing a price higher than the monopoly price is also a dominated strategy, as it results in lower profits. The rationalizable strategies in this game are setting a positive price between $0 and the monopoly price.

(a) Setting a price of $0 is a dominated strategy for each firm because their rival firm can undercut them by setting a slightly positive price, resulting in zero profits for the firm setting $0. Similarly, setting a price of $6 is dominated because the rival firm can set a slightly lower price and capture the entire market demand, leaving the firm setting $6 with zero profits.

(b) The monopoly price represents the highest price that a firm can set while still maximizing its profits. Any price higher than the monopoly price will result in a decrease in demand and lower profits. Thus, choosing a price higher than the monopoly price is a dominated strategy.

(c) The rationalizable strategies in this game are the set of prices between $0 and the monopoly price. The Nash Equilibrium occurs when both firms set the monopoly price, as neither firm has an incentive to deviate from this strategy.

(d) In the Nash Equilibrium, both firms set the monopoly price, resulting in a quantity sold in the market that corresponds to the demand at the monopoly price. Each firm earns a profit equal to half of the total industry profits, as they split the resulting demand equally between them.

(e) The market outcome in Bertrand competition with the Nash Equilibrium price and quantity is different from the monopoly outcome. In the monopoly outcome, the single firm sets the monopoly price and quantity, earning higher profits compared to the Nash Equilibrium in Bertrand competition. The presence of competition in the Bertrand model drives prices down towards marginal costs, resulting in lower profits for both firms compared to the monopoly outcome.

Learn more about price  here:

https://brainly.com/question/14871199

#SPJ11

The value should be reported as follows:

25.1 ± 0.1

In this case, the value has been rounded to the same decimal place as the uncertainty, which is the first decimal place. The uncertainty is rounded to one significant figure to reflect the precision of the measurement. The value is reported with one decimal place, which is the same as the uncertainty, to maintain consistency.

Learn more about value here:

brainly.com/question/30169

#SPJ11

The answers in part (b) represent the fines for violating the speed limits on the freeway. In part (b), we are given three values for x: 25, 60, and 80. Let's evaluate each of them in the piecewise function F(x).

For F(25), we look at the first condition, which states that if the speed is less than 40 mi/h, the output is 0. Since 25 is less than 40, F(25) would be 0.

For F(60), we consider the second condition. If the speed is between 40 and 65 mi/h (inclusive), the output is the square root of the speed minus 40. So, F(60) would be √(60 - 40) = √20 = 2√5.

For F(80), we focus on the third condition. If the speed is greater than 65 mi/h, the output is 70. Since 80 is greater than 65, F(80) would be 70.

Based on these evaluations, it is clear that the answers in part (b) represent the fines for violating the speed limits on the freeway. F(25) and F(80) both result in non-zero values, indicating that fines would be incurred for driving at those speeds. On the other hand, F(60) yields a non-zero value as well, representing a fine for exceeding the speed limit between 40 and 65 mi/h. Therefore, the fines for violating the speed limits on the freeway are represented by the answers in part (b).

Learn more about values here:

https://brainly.com/question/30145972

#SPJ11

The value of the product (-4+5 i)(-4-5 i)is 41.

To find the product of the complex numbers (-4+5i) and (-4-5i).

we can use the FOIL method, which stands for First, Outer, Inner, Last.

First, we multiply the first terms of each binomial:

(-4) × (-4) = 16

Outer, we multiply the outer terms:

(-4) ×  (-5i) = 20i

Inner, we multiply the inner terms:

(5i) ×  (-4) = -20i

Last, we multiply the last terms:

(5i) ×  (-5i) = -25i²

Now, we simplify the result:

Remember that i×  is defined as -1, so we have:

-25i² = -25 ×  (-1) = 25

Putting it all together, the product of (-4+5i) and (-4-5i) is:

16 + 20i - 20i + 25

= 16 + 25

= 41

Therefore, (-4+5i)(-4-5i) equals 41.

To learn more on Complex numbers click:

https://brainly.com/question/20566728

#SPJ4

1) The sum is 4.9.

2) The sum is 7.4.

To add numbers while maintaining the correct number of significant digits, follow these steps:

Determine the number with the fewest decimal places (or significant figures) among the numbers being added.

Add the numbers together.

Round the result to match the number of decimal places (or significant figures) of the least precise number.

Let's apply these steps to the given examples:

1) 2.1 + 2.824:

The number 2.1 has one decimal place, and 2.824 has three decimal places. So, we need to round the result to one decimal place.

2.1 + 2.824 = 4.924

Since the number 2.1 has one decimal place, the final result should also have one decimal place. Therefore, the sum is 4.9.

2) 3.2 + 4.19:

The number 3.2 has one decimal place, and 4.19 has two decimal places. So, we need to round the result to one decimal place.

3.2 + 4.19 = 7.39

Since the number 3.2 has one decimal place, the final result should also have one decimal place. Therefore, the sum is 7.4.

In both cases, the sum is rounded to match the least precise number in terms of decimal places (or significant figures). This helps maintain the appropriate level of precision in the final result, consistent with the original approximations.

Learn more about Significant Digits click;

https://brainly.com/question/28993414

#SPJ4

Complete question =

Add the following numbers, leaving the results with the correct number of significant digits if each number is assumed to be approximate

1) 2.1 + 2.824

2) 3.2 + 4.19

The system will be consistent and will have unique solution.

Given,

Coefficient matrix of 5 equation in 5 variables.

Here,

Let A be a 5x5 coefficient matrix such that its each column has a pivot element, then

Rank A = 5, rank of augmented matrix [A|b] = 5 and number of unknowns = 5

Rank A = rank of augmented matrix [A|b] = number of unknowns = 5

Hence , System is consistent

There is a unique intersection point of all three lines, so values of variables is unique.

Hence, solution of system if unique.

Know more about unique solutions,

https://brainly.com/question/31902867

#SPJ4

The X-bar and R chart method is suitable for monitoring continuous data, such as measurements or weights. The p chart is used to monitor the proportion of nonconforming items in a sample, while the c chart is used when the count of nonconformities is being monitored.

The X-bar and R chart method is utilized when the focus is on continuous data. It consists of two charts: the X-bar chart, which tracks the average or mean of a process, and the R chart, which monitors the range or variation within subgroups. This method is commonly used in industries where measurements or weights are critical, such as manufacturing processes, chemical production, or quality control in laboratories. The X-bar chart helps identify shifts or trends in the process mean, while the R chart detects variations within subgroups.

The p chart is employed when the objective is to monitor the proportion of nonconforming items in a sample. It is useful when dealing with attribute data, where each item is classified as either conforming or nonconforming. The p chart is commonly used in industries where the focus is on the quality of a product or service, such as in pharmaceutical manufacturing, food processing, or customer satisfaction surveys. This chart helps identify any significant changes in the proportion of nonconforming items, enabling timely corrective actions.

The c chart is employed when the count of nonconformities is being monitored. It is particularly suitable for situations where the number of nonconformities can vary within a sample, such as defects in a product or errors in a process. The c chart is frequently used in industries where the occurrence of defects needs to be controlled, like automotive manufacturing, electronics production, or healthcare facilities. By monitoring the count of nonconformities, the c chart helps detect any unusual variations and facilitates the implementation of corrective measures to maintain process stability and quality standards.

Learn more about R chart here:

https://brainly.com/question/32560185

#SPJ11

The value of x that makes ABCD an isosceles quadrilateral is x = 11.

To determine the value of x that makes ABCD an isosceles quadrilateral, we need to find the condition where AB is congruent to CD and BC is congruent to AD.

In an isosceles quadrilateral, opposite angles are congruent.

So, we can set up an equation based on the given angle measures:

m∠ABC = m∠CDA   (opposite angles)

4x + 11 = 2x + 33   (substituting the given angle measures)

4x - 2x = 33 - 11

2x = 22

x = 11

Hence, the value of x that makes ABCD an isosceles quadrilateral is x = 11.

Learn more about isosceles quadrilateral here:

https://brainly.com/question/29291052

#SPJ4

The triangle with side lengths 11, 12 and 24 is a obtuse triangle.

Let us assume a, b and c are three sides of a triangle in such a way that c is the longer side.

if c²=a²+b² then the triangle is a right triangle.

if c²>a²+b² then the triangle is a obtuse triangle.

if c²<a²+b² then the triangle is a acute triangle.

Let us take c=24, a=11 and b=12.

24²=11²+12²

576=121+144

576>265

Since, 576>265 the triangle is a obtuse triangle.

To learn more on Triangles click:

https://brainly.com/question/2773823

#SPJ4

Answer:

64,000 cm³

Step-by-step explanation:

To find the volume of the wall, we first need to find the volume of a single brick. The volume of a cuboid (brick) can be calculated using the formula:

For a single brick with dimensions 8cm × 4cm × 4cm, the volume would be:

Now, to find the volume of the wall that can be prepared by 500 bricks, we simply multiply the volume of a single brick by the number of bricks:

So, the volume of the wall that can be prepared by 500 bricks with dimensions 8cm × 4cm × 4cm is 64,000 cm³.

________________________________________________________

The problem states that the power generated by a wind turbine varies directly as the cube of the wind speed.

We are given that a turbine with 30% efficiency produces approximately 10,000 watts of electricity in a 50-mile-per-hour wind. We need to determine how many watts the same turbine would produce in a 25-mile-per-hour wind. Since power varies directly with the cube of the wind speed, we can set up a proportion to solve for the power in the 25-mile-per-hour wind.

Let's denote the power produced in the 50-mile-per-hour wind as P1 and the power produced in the 25-mile-per-hour wind as P2. We have the equation P1 / P2 = (V1³ / V2³), where V1 is the wind speed in the 50-mile-per-hour wind (50 mph), V2 is the wind speed in the 25-mile-per-hour wind (25 mph). Plugging in the given values, we have 10,000 / P2 = (50³ / 25³). Simplifying further, we get 10,000 / P2 = (50² / 25²) * (50 / 25). The efficiency of the turbine, which is 30%, accounts for the multiplying factor of (50² / 25²).

Solving for P2, we have P2 = 10,000 / [(50² / 25²) * (50 / 25)]. Evaluating the expression within the brackets, we get P2 = 10,000 / (4 * 2) = 10,000 / 8 = 1,250. Therefore, the same turbine would produce approximately 1,250 watts of electricity in a 25-mile-per-hour wind.

Learn more about efficiency here: brainly.com/question/31458903

#SPJ11

The equation will be written as P =  [tex]n^k[/tex].

The multistage experiment has n possible outcomes at each stage. It means;

The number of outcomes for the 2 stages will be  = n * n = [tex]n^2[/tex]

The number of outcomes for the 2 stages will be  = n * n * n  = [tex]n^3[/tex]

The number of outcomes for k stages will be = n * n * n ... *n = [tex]n^k[/tex]

If our experiment is of k stages, then the total number of outcomes will be written as;

P = [tex]n^k[/tex]

The total number of possible outcomes is the product of the number of outcomes for each of the stages 1 through k. Because there are k stages, we are multiplying n by itself k times which is [tex]n^k[/tex].

Therefore, the equation will be written as P =  [tex]n^k[/tex].

To learn more about the total number of outcomes;

https://brainly.com/question/16357763

#SPJ4

Assumption: Assume that 4y + 17 = 41.

an indirect proof of the statement "If 4y + 17 = 41, then y = 6," we make the assumption that 4y + 17 = 41.

In an indirect proof, we assume the opposite of what we want to prove and then demonstrate that it leads to a contradiction. By assuming that 4y + 17 = 41, we can proceed with logical steps to show that this assumption leads to a contradiction, which would then validate the original statement that y = 6.

By assuming the opposite and working through the logical steps, we aim to demonstrate that no other solution is possible except y = 6, reinforcing the validity of the statement.

To learn more about assumption

brainly.com/question/30799033

#SPJ11

To find the volume of a rectangular prism with a square base of side length x and a surface area of 100 square feet, we can use the formula for the surface area of a rectangular prism.

The surface area of a rectangular prism is given by the formula SA = 2lw + 2lh + 2wh, where l, w, and h represent the length, width, and height of the prism, respectively. Since we have a rectangular prism with a square base, the length and width are both equal to x, and the height can be denoted as h. Given that the surface area is 100 square feet, we can set up the equation as follows:

100 = 2x^2 + 2xh + 2xh. Simplifying the equation, we have:

100 = 2x^2 + 4xh. Now, to express the volume of the box as a function of x, denoted as v(x), we need to use the formula for the volume of a rectangular prism, which is V = lwh. Since the base is a square, the length and width are both equal to x. Therefore, the volume can be expressed as:

v(x) = x^2h.

So, the volume of the rectangular prism, as a function of x, is v(x) = x^2h.

Learn more about The surface area here: brainly.com/question/31089987

#SPJ11

The result of the operation (3x/2) + (5x/2) is 4x.

A common denominator is a shared multiple of the denominators of two or more fractions. It is used to simplify the process of adding or subtracting fractions.

To explain with an example, let's consider the fractions 1/4 and 2/5. These fractions have different denominators, which means they cannot be added or subtracted directly. To add or subtract them, we need to find a common denominator.

To perform the indicated operation (3x/2) + (5x/2), we combine like terms by adding the coefficients of x.

The common denominator for the fractions is 2, so we can write the expression as:

(3x + 5x) / 2

Adding the coefficients of x gives:

8x / 2

Simplifying the expression further:

8x / 2 = 4x

Therefore, the result of the operation (3x/2) + (5x/2) is 4x.

Learn more about Fractions at:

https://brainly.com/question/78672

#SPJ4

The population median commute time of the employees of Asons is 40 minutes.

The median is a measure of central tendency that represents the middle value in a dataset when the data is arranged in ascending or descending order. In this case, the commute times provided are 47.4, 45, 35, and 40 minutes.

To determine the median, we arrange the commute times in ascending order: 35, 40, 45, 47.4. Since there are four values in the dataset, the middle value is the average of the two central values, which are 40 and 45. Taking the average of these two values gives us the median of 40 minutes.

Therefore, the population median commute time of the employees of Asons is 40 minutes, indicating that half of the employees have a commute time of 40 minutes or less, while the other half have a commute time of 40 minutes or more.

Learn more about median here:

https://brainly.com/question/16408033

#SPJ11

The calculated depth of the well in feet is 402.5 feet

From the question, we have the following parameters that can be used in our computation:

Time, t = 5 seconds

The depth of the well in feet is calculated as

d = 1/2gt²

substitute the known values in the above equation, so, we have the following representation

d = 1/2 * 32.2 * 5²

Evaluate

d = 402.5

Hence, the depth is 402.5 feet

Read more about height functions at

https://brainly.com/question/10837575

#SPJ4

For a tapered cylinder with a taper per foot (T) of 0.75, 0.85, and 0.95, and given that the initial radius (R) is 4 in.

To find the length (L) for each taper per foot (T), we can rearrange the formula T= 24(R-r)/L to solve for L. Substituting the given values of R=4 in. and r=3 in., we have:

0.75 = 24(4-3)/L

0.85 = 24(4-3)/L

0.95 = 24(4-3)/L

Simplifying these equations, we get:

0.75L = 24

0.85L = 24

0.95L = 24

Dividing both sides of each equation by the corresponding coefficient, we find:

L = 24/0.75

L = 24/0.85

L = 24/0.95

Evaluating these expressions, we get:

L ≈ 32 in.

L ≈ 28.24 in.

L ≈ 25.26 in.

Therefore, the length (L) for taper per foot values of 0.75, 0.85, and 0.95, with R=4 in. and r=3 in., are approximately 32 in., 28.24 in., and 25.26 in., respectively.

Learn more about equation: brainly.com/question/29174899

#SPJ11

The levels of factor is 4 when the degree of freedom is 3 .

Given,

Degree of freedom = 3

Now,

If factor A has a levels, then numerator degree of freedom for factor A is

df  = A - 1

Here,

In the given case degree of freedom is 3 so levels of factors,

A = 3+1 = 4.

Therefore given statement is false.

Know more about degree of freedom,

https://brainly.com/question/32093315

#SPJ4

Complete question :

A two-factor analysis of variance produces an f-ratio for factor a that has df = 3, 36. this analysis is comparing three different levels of factor A. True False.

Answer:

30°

Step-by-step explanation:

complementary angles sum to 90°

then the complement of 60° = 90° - 60° = 30°

The frequency distribution table might look like this:

Class Interval | Frequency

35,000 - 40,000 | 8

40,000 - 45,000 | 12

45,000 - 50,000 | 10

... | ...

To construct a frequency distribution with a lower class limit of 35,000 and a class width of 5,000, we would need the actual income data and the frequency (number of occurrences) for each income value. Without the specific data, I cannot provide the frequency distribution table. However, I can guide you on how to create one using your data.

Assuming you have a dataset of income values and their frequencies, follow these steps to construct the frequency distribution:

Determine the class boundaries:

The lower class limit is 35,000.

The upper class limit can be found by adding the class width to the lower class limit: 35,000 + 5,000 = 40,000.

Class boundaries define the range of values for each class interval. In this case, the class boundaries for the first class are 35,000 (inclusive) and 40,000 (exclusive).

Create the class intervals:

Based on the class boundaries, you can create class intervals. For example, the first class interval would be "35,000 - 40,000".

Collect the data values and count the frequency of each value falling within the given class boundaries:

Go through your dataset and count the number of income values that fall within each class interval. Sum up the frequencies for each class interval.

Create a frequency distribution table:

Create a table with two columns: "Class Interval" and "Frequency".

List the class intervals in the "Class Interval" column.

Enter the frequencies in the "Frequency" column corresponding to each class interval.

For example, the frequency distribution table might look like this:

Class Interval | Frequency

35,000 - 40,000 | 8

40,000 - 45,000 | 12

45,000 - 50,000 | 10

... | ...

To know more about frequency distribution visit:

https://brainly.com/question/29116954

#SPJ4

complete question:

(a) Construct a frequency distribution. Use a first class having a lower class limit of 35,000 and a class width of 5000.

Income

Frequency

Each step of constructing a rectangle is described below and justification is also described.

To construct a rectangle using the construction for congruent segments and the construction for a line perpendicular to another line through a point on the line, follow these steps:

Draw a line segment AB as the base of the rectangle.

Using the construction for congruent segments, construct a line segment CD that is congruent to AB.

Draw a perpendicular line to AB at point A using the construction for a line perpendicular to another line through a point on the line. Let this line intersect CD at point E.

Draw a perpendicular line to AB at point B using the same construction. Let this line intersect CD at point F.

Connect points C and E with a straight line.

Connect points D and F with a straight line.

Finally, connect points C and D, as well as points E and F, with straight lines to complete the rectangle.

Justification for each step:

This step is the starting point of the construction.

We use the construction for congruent segments to create segment CD, which will be parallel to AB and form the other side of the rectangle.

We use the construction for a line perpendicular to another line through a point on the line to draw a perpendicular line to AB through point A, which will be one of the corners of the rectangle.

We use the same construction to draw a perpendicular line to AB through point B, which will be another corner of the rectangle.

We connect point C and point E with a straight line to form one side of the rectangle.

We connect point D and point F with a straight line to form the other side of the rectangle.

Finally, we connect points C and D, as well as points E and F, with straight lines to complete the rectangle and create the last two sides of the rectangle.

To learn more about rectangle visit:

https://brainly.com/question/15019502

#SPJ4

The point(s) of intersection between the parabola [tex]y = 2x^2[/tex] and the line y = 4x - 2 can be found by setting the equations equal to each other and solving for x is (1, 2)

The point(s) of intersection between the parabola  [tex]y = 2x^2[/tex] and the line y = 4x - 2 can be found by setting the equations equal to each other and solving for x.

To find the point(s) of intersection, we equate the two equations:

[tex]2x^2 = 4x - 2[/tex]

This is a quadratic equation, which can be solved by setting it equal to zero:

[tex]2x^2 - 4x + 2 = 0[/tex]

To solve the quadratic equation, we can use the quadratic formula:

[tex]x = (-b \pm \sqrt{b^2 - 4ac}) / (2a)[/tex]

In this case, a = 2, b = -4, and c = 2. Plugging in these values into the quadratic formula, we get:

[tex]x = (-(-4)\pm \sqrt{(-4)^2 - 4 * 2 * 2}) / (2 * 2)\\x = (4 \pm\sqrt{16 - 16}) / 4\\x = (4\pm \sqrt{0}) / 4\\x = (4 \pm0) / 4\\x = 1[/tex]

Therefore, the line y = 4x - 2 intersects the parabola [tex]y = 2x^2[/tex]at the point (1, 2).

Learn more about points of intersection here:

https://brainly.com/question/2193207

#SPJ4

The next time the red line and blue line trains will arrive at the station at the same time will be in 40 minutes.

To determine the next time the red line and blue line trains will arrive at the station simultaneously, we need to find the least common multiple (LCM) of the time intervals between their arrivals. The red line arrives every 8 minutes, and the blue line arrives every 10 minutes.

The LCM of 8 and 10 is 40. Therefore, it will take 40 minutes for both trains to arrive at the station at the same time again.

As for the blue line and yellow line trains, their time intervals between arrivals are 10 minutes and 12 minutes, respectively. To find the next time they will arrive at the station simultaneously, we again need to find the LCM of these time intervals.

The LCM of 10 and 12 is 60. Therefore, it will take 60 minutes for both the blue line and yellow line trains to arrive at the station at the same time again.

Finally, to determine when all three trains (red line, blue line, and yellow line) will arrive at the station simultaneously, we need to find the LCM of their respective time intervals. The time intervals are 8 minutes, 10 minutes, and 12 minutes.

The LCM of 8, 10, and 12 is 120. Thus, it will take 120 minutes for all three trains to arrive at the station at the same time.

In summary, the next time the red line and blue line trains will arrive at the station at the same time is in 40 minutes, the next time the blue line and yellow line trains will arrive simultaneously is in 60 minutes, and the next time all three trains will arrive together is in 120 minutes.

Learn more about least common multiple here : brainly.com/question/30060162

#SPJ11

Answer:

2πr = 4, so r = 2/π

Curved surface area = 2π(2/π)(9) = 36 cm²

The volume of the cone is,

V = 28.1 millimeters

We have to give that,

An oblique cone with a height of 10.5 millimeters and a radius of 1.6 millimeters.

Since the Volume of the cone is,

V = πr²h/3

Here, r = 1.6 millimeters

h = 10.5 millimeters

Substitute all the values,

V = 3.14 × 1.6² × 10.5 / 3

V = 80.4/3

V = 28.1 millimeters

Therefore, The volume is,

V = 28.1 millimeters

To learn more about the volume visit:

brainly.com/question/24372707

#SPJ4

The type of variable that represents the names of the automobile manufacturers would be the categorical variable.

A variable is defined as the quantity that may change within the context of a mathematical problem, research work or an experiment.

There are various types of variables that include the following:

Learn more about variables here:

https://brainly.com/question/30292654

#SPJ1

The missing terms are 프 = 25 and 페 = -50.

We are given that;

The first and second terms of the sequence are 12.5 and 5.12

Now,

To find the missing terms of a geometric sequence, we can use the formula for the nth term of a geometric sequence:

[tex]an = a1 * r^(n-1)[/tex]

where an is the nth term, a1 is the first term, r is the common ratio, and n is the number of terms.

The geometric mean of the first and fifth terms is the third term. So we have:

sqrt(12.5 * 5.12) = [tex]sqrt(p^2)[/tex]

where p is the third term.

Simplifying this equation gives:

sqrt(64) = p

p = 8

Therefore, by geometric sequence the answer will be 프 = 25 and 페 = -50.

Learn more about geometric sequence here:

brainly.com/question/1607203

#SPJ4

The value of x is 6.

The value of x can be found with the help of Pythagoras theorem and Perpendicular Bisector theorem. As we can see in the diagram, the radius of the circle is 8 and point T and U are perpendicular. The value of PQ is 3x-4 and RS is 14. So, we will draw two lines from point H to point Q and point R making two perpendicular angled triangles.

So, according to the diagram:

In ΔHRU, [tex]HR^{2}[/tex] = [tex]HU^{2} + UR^{2}[/tex]

As we know, a perpendicular radius bisects the chord,

UR = 1/2 * RS

UR = 1/2 * 14

UR = 7

So, [tex]HR^{2}[/tex] = [tex]8^{2} + 7^{2}[/tex]

[tex]HR^{2}[/tex] = 113

As we know that the radii of the circles are equal, so:

[tex]HR^{2} = HQ^{2}[/tex] [tex]= 113[/tex]

Similarly, in ΔHQT

[tex]HQ^{2} = HT^{2} + TQ^{2}[/tex]

[tex]TQ^{2} = 113 - 64[/tex]

[tex]TQ^{2} = \sqrt[]{49}[/tex]

[tex]TQ^{2} = 7[/tex]

As we know, a perpendicular radius bisects the chord,

TQ = 1/2 * PQ

PQ = 2 * TQ

PQ = 2 * 7

PQ = 14

But, in the question we have been given PQ as 3x - 4, so:

3x - 4 = 14

3x = 18

x = 6

Therefore, value of x when PQ=3x-4 and RS=14 is 6.

To know more about Perpendicular Bisector Theorem:

https://brainly.com/question/27948960

#SPJ4

Surface area of a prism and surface area of a cylinder  involve finding the sum of the areas of all the faces that make up the solid shape.

Finding the surface area of a prism and finding the surface area of a cylinder have similarities and differences.

Similarities:

Both involve finding the sum of the areas of all the faces that make up the solid shape.

Both use basic geometric formulas to calculate the area of individual faces (e.g., rectangles for prisms, circles for cylinders).

Differences:

Faces: A prism has two congruent parallel bases connected by rectangular faces, whereas a cylinder has two circular bases connected by a curved surface.

Formulas: The formulas for finding surface area differ. For a prism, you calculate the sum of the areas of the bases and the lateral faces. The surface area of a rectangular prism is given by 2lw + 2lh + 2wh, where l, w, and h are the length, width, and height, respectively. For a cylinder, you calculate the sum of the areas of the two bases and the lateral surface area. The surface area of a cylinder is given by 2πr² + 2πrh, where r is the radius and h is the height.

Shape: Prisms have flat faces and straight edges, while cylinders have curved surfaces.

While both involve calculating the sum of the areas of the faces, prisms and cylinders differ in terms of their faces, formulas, and overall shape.

For more such questions on Surface area

https://brainly.com/question/16519513

#SPJ8