Answer:
-85 °C
Explanation:
O and S are in the same group( Group 16). Since S is below O it's atomic mass is higher than O. So molar mass of H2S is higher than H2O. The strength of Vanderwaal Interactions ( London dispersion forces) increases when the molar mass increases. However, only H2O can form H bonds with each other. This is because electronegativity of O is higher than S and therefore H in H2O has a higher partial positive charge than H of H2S.
H bond dominate among these 2 types of forces so the strength of attractions between molecules is higher in H2O than H2S. Therefore more energy should be supplied for H2O to break inter
molecular forces and convert from solid to liquid state than H2S. So mpt of H2O must be higher than that of H2S.
Which is larger? 12 milligrams or 12 kilograms
Answer:
12 kilograms is larger.
Explanation:
Of the three units, the kilogram is the largest and the milligram is the smallest. The prefix “kilo” means a thousand and “milli” means one-thousandths. A gram is the basic unit of mass.
When magnesium chloride is formed what question will the student need to ask prior to writing the formula?
A.
What are the oxidation numbers of each atom?
B.
What is the total number of electrons for each atom?
C.
What is the state of matter of each element in the formula?
D.
What period does magnesium belong to?
Prior to writing the chemical formula of magnesium chloride, a question which any student will need to ask is: A. What are the oxidation numbers of each atom?
A chemical formula can be defined as a scientific notation that is used to show (represent) the type and total number of atoms that constitute a particular chemical molecule or compound, by using the oxidation number, chemical symbols and subscripts.
Hence, a student would need to know the oxidation numbers of each atom when magnesium chloride is formed after a chemical reaction.
In Chemistry, an oxidation number represents the number of electrons gained or lost by an atom of a chemical element during a chemical reaction.
In conclusion, when magnesium chloride is formed, a question which the student will need to ask prior to writing the chemical formula is "what are the oxidation numbers of each atom?"
Read more: https://brainly.com/question/13750908
A 0.48-mole sample of helium gas occupies a volume of 11.7 L . What is the volume of 0.72 mol of helium gas under the same conditions
AnswerExplanation:I finsished d
Answer:
17.55L
Explanation:
0.48mol : 11.7
0.72mol : x
0.48x = 8.424
x = 17.55
pls help see attached pic for the question.
Answer: Evaporation and sublimation.
Explanation: Evaporation is the process of changing from liquid to gas, and sublimation is the process of changing from solid to gas.
Magnesium has a density of 1.74 g/cm3. What is the volume of 58.6 g of Mg?
Answer:
1 kg = 1000 g
58.6=58,600g
Explanation:
Bethany observes a white crystal that is cube shaped under a microscope.
Based on this observation, Bethany thinks the crystal could be sodium chloride, or table
salt. Because the crystal has an extended structure, she knows that sodium chloride is
not a molecule. Bethany uses gray and white spheres, representing the atoms in
sodium chloride, to make a model of the crystal’s most likely structure, as shown.
a. Provide two reasons why the model accurately represents sodium chloride. Support
your reasons with evidence from the model.
b. Predict whether the melting point should be high or low based on the model.
Answer:
In nature there are many different minerals we call "Salts". If you look very closely at the particles of table salt, you will find little cubic crystals. These salt crystals are made of sodium chloride (NaCl), and their cubic shape is due to a very specific arrangement of the atoms. As discussed earlier, all of the minerals classified as salts are held together through ionic bonds. The arrangement of atoms, the shapes of the crystals they form, and their mechanical, thermal, and electrical properties are all due to this special type of bonding
The two reasons why the model shows sodium chloride is that:
Sodium chloride crystals are cubic in their form as they have crystalline structure.Why sodium chloride does not exist as molecule?The other is that:
Sodium chloride does exist as an aggregates of a bigger number of ions that are oppositely charged as shown using gray and white spheres.The melting point will be high based on the model as because Sodium chloride is known to have high melting and boiling point.Note that a lot of Formula unit cannot exist as a single entity. Because of this, compound such as NaCl exist only as an aggregates of a more bigger number of ions that are oppositely charged .
Learn more about Sodium chloride from
https://brainly.com/question/24490939
#SPJ2
Which substance is the limiting reactant when 24.0 g of sodium hydroxide reacts with 18.0 g of oxygen and 12.0 g of sulfur according to the following chemical equation:
2 S(s) + 3 O2(g) + 4 NaOH(aq) → 2 Na2SO4(aq) + 2 H2O(l)
Answer:
Sodium hydroxide.
Explanation:
Don't be confused by the fact that you have three reactants, you can find the limiting reagent by using the same technique you use for reactions that have two reactants.
for more info... use the link
https://socratic.org/questions/which-substance-is-the-limiting-reactant-when-2-0-g-of-sulfur-reacts-with-3-0-g-#171384
hope it helps and please give brainliest
ThAnK YoU
Which statement best describes the driving force behind the electrophilic addition of strong acid to an alkene
The chemical transformation of a carbon-carbon double bond is by addition reaction. The statement best describes the driving force is that the reaction is favorable because the total bond strength in the products is greater than in the reactants.
A great number of reagents often found in inorganic and organic, have been known to add to the functional group of alkenes.The bond energies of a molecule is simply known as the energies needed to break all the covalent bonds in the molecule.
When the bond energies of the product molecules is known to be greater than the bond energies of the reactants, the reaction is regarded as exothermic.
The full question is below
Which statement best describes the driving force behind the electrophilic addition of strong acid to an alkene?
The reaction is favorable because the pi bond is stronger than a sigma bond and it takes more energy to break it.
The reaction is favorable because a less stable, high-energy intermediate is formed.
The reaction is favorable because the first step is the rate-determining step.
The reaction is favorable because the total bond strength in the products is greater than in the reactants.
The reaction is favorable because the overall reaction is endothermic.
Learn more from
https://brainly.com/question/17544844
:
Using the material selection processes, justify why the manufacturers/designers used the materials they did for super glue?
Answer:
Aluminium reusable water bottle Purpose of aluminum: Weighs less by volume than most other metals and comes at an affordable price.
Explanation:
How is hydrogen isolated from water
To extract hydrogen from water, researchers insert two electrodes across the water and pass current, which can separate the hydrogen from water. The process called electrolysis of water. ... An electric field applied through the cobalt oxide to water molecules resulted in the electrolysis of water
Hydrogen gas is an environment-friendly fuel — it produces water on combustion in the presence of oxygen. ... To extract hydrogen from water, researchers insert two electrodes across the water and pass current, which can separate the hydrogen from water. The process called electrolysis of water.
Silver can be plated out of a solution containing Ag+ according to the half-reaction
Ag+(aq)+e−→Ag(s)
How much time (in minutes) does it take to plate 19 g of silver using a current of 3.4 A ?
Answer:
Approximately [tex]83[/tex] minutes.
Explanation:
Look up the relative atomic mass of [tex]\rm Ag[/tex]: [tex]M({\rm Ag}) = 107.868\; \rm g \cdot mol^{-1}[/tex].[tex]\begin{aligned}Q &= e\, (n(e)) \\ &\approx 1.602 \times 10^{-19}\; \rm C \times 1.06 \times 10^{23} \\ &\approx 1.6987 \times 10^{4}\; \rm C \end{aligned}[/tex]/.
Avogadro's number: [tex]N_A \approx 6.02 \times 10^{23}\; \rm mol^{-1}[/tex].
Elementary charge: [tex]e \approx 1.602 \times 10^{-19}\; \rm C[/tex].
Calculate the quantity of [tex]\rm Ag[/tex] atoms to reduce:
[tex]\begin{aligned}& n({\rm Ag}) \\ &= \frac{m({\rm Ag})}{M({\rm Ag})} \\ &= \frac{19\; \rm g}{107.868\; \rm g \cdot mol^{-1}} \\ & \approx 0.176\; \rm mol\end{aligned}[/tex].
By the equation, it takes one electron to reduce every [tex]\rm Ag[/tex] atom. Thus, the number of electrons required to reduce [tex]0.176\; \rm mol[/tex] of [tex]\rm Ag\![/tex] atoms would be:
[tex]n(e) = n({\rm Ag}) \approx 0.176\; \rm mol[/tex].
[tex]\begin{aligned}N(e) &= n(e) \cdot N_{A}. \\ &\approx 0.176\; \rm mol \times 6.02 \times 10^{23}\; \rm mol^{-1} \\ & \approx 1.06 \times 10^{23}\end{aligned}[/tex].
Calculate the amount of charge (in coulombs) in that many electrons:
[tex]\begin{aligned}Q &= e\, (n(e)) \\ &\approx 1.602 \times 10^{-19}\; \rm C \times 1.06 \times 10^{23} \\ &\approx 16987.1 \; \rm C \end{aligned}[/tex].
A current of [tex]1\; \rm A[/tex] carries a charge of [tex]1\; \rm C[/tex] every second. Thus, the amount of time required for this current to carry that much electron would be:"
[tex]\begin{aligned}t &= \frac{Q}{I} \\ &\approx \frac{16987.1\; \rm C}{3.4\; \rm A} \\ &\approx 83.3\; \rm s \\ &\approx 5.00\times 10^{3}\; \rm s \\ &\approx 83\; \text{minutes} \end{aligned}[/tex].
Draw the skeletal structure of 3-octanethiol
found a picture hope this helps
Which stage of a fire can be described as follows: The flames are not visible and the combustible item no longer generates heat or combustion products
Fire extinguishment is referred to the stage in which flames are not visible
and the combustible item no longer generates heat.
This stage refers to when the fire has been put out through a fire
extinguisher or other compounds. When fire is put out, there is no longer
flames present.
The absence of flames also means that there is no heat generation or
combustion products due to the absence of a heat source.
Read more on https://brainly.com/question/24313137
Which of the following is true about the actinide series?
Answer:
All of the elements are radioactive and contain the transuranium elements.
Explanation:
N/A
A mixture of methanol and water was distilled using both simple distillation and fractional distillation. Which statement is NOT true
With regard to distilling the mixture of methanol and water using simple
distillation and fractional distillation, a statement that can be made that is
not true is that; Methanol and water form an azeotrope.
Reasons:
Azeotrope are liquid mixtures that have the property of a constant boiling
point due to the contents of the vapor are the same as the mixture.
Water when mixed with methanol form network structures. However,
methanol does not form a binary azeotrope with water.
Therefore, a statement that is not true is that methanol and water form an
azeotrope a mixture that has a constant boiling temperature.
Learn more about azeotropes here:
https://brainly.com/question/13095223
Did cellular respiration occur in trial 3 with the yeast and sugar?
PLEASE HELP ITS DO RIGHT NOWW
Answer:
In summary, yeast is a single-celled fungus that uses cellular respiration, which converts glucose and oxygen into carbon dioxide and ATP. ... Aerobic respiration makes the most ATP, between 36 and 38. Fermentation is anaerobic respiration and happens without oxygen.
Electromagnetic waves travel fastest through
A -Solid
B -Liquid
C -Gas
D-Vacuum
Answer:
Gas
Explanation:
Mechanical waves- travel faster in solids & slowest in gases
Electromagnetic waves- travel fastest in empty space and slowest in solids.
Because they are so close, than can collide very quickly, i.e. it takes less time for a molecule of the solid to 'bump' into its neighborough. Solids are packed together tighter than liquids and gases, hence sound travels fastest in solids. The distances in liquids are shorter than in gases, but longer than in solids.
Answer C- Gas
Explanation:
Electromagnetic waves- travel fastest in empty space and slowest in solids.
The distance between two adjacent peaks on a wave is called the wavelength. (2pts) a. The wavelength of ultraviolet light is 255nm. What is the wavelength in meters? b. The wavelength of a beam of red light is 683nm. What is its wavelength in angstroms?
Answer:
a.2.55e-7
b.6830
Explanation:
A car is traveling 70km in 45 minutes. How many miles an hour is the car traveling?
52
Explanation:
70x45÷60= 52
I hope this is helpful
Environmental scientists collect air samples so they can test the quality of the air. They start with rigid metal containers that are completely empty—the air has been pumped out of them.
What happens to the pressure inside the container and the volume of the container as air enters it?
Explanation:
filling air inside an empty o2 medal containers, if air is added, the air inside, creates volume inside.
due to heat, weather,... depending on what indoor or outdoor storage said containers r placed in,;
So, I can't give you an answer, due to lack of details..sorry...
The process of returning mines to their original state is called ________________________.
Answer:
Mine Reclamation.Explanation:
The process of returning mines to their original state is called Mine Reclamation. HOPE THIS HELPS :)Which of the following describes how air resistance affects the motion of a falling object?
Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Air resistance may change the direction of a falling object but does not affect its speed.
Air resistance may change the direction of a falling object but does not affect its speed.
Air resistance works with gravity to pull a falling object towards the Earth.
Air resistance works with gravity to pull a falling object towards the Earth.
Air resistance opposes the force of gravity and causes an object to reach terminal velocity.
Air resistance opposes the force of gravity and causes an object to reach terminal velocity.
Air resistance opposes the gravity in a falling object hence the object loses speed once it reaches terminal velocity.
According to the experiment of Galileo, in the absence of air resistance, all objects that are thrown down from the same height will hit the ground at he same time due to the effect of gravity.
We know that the air resistance makes the acceleration of object to become less than the acceleration due to gravity. So, air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Learn more: https://brainly.com/question/865531
Answer:
The answer is D - Air resistance opposes the force of gravity and causes falling objects to lose speed once they reach terminal velocity.
Ill explain why -, for example ,
When the paper is smooth, it exposes a large surface to the air beneath it which slows its descent. Once it is crumpled, the surface which comes in contact with the air is much smaller, allowing it to fall much faster. At first, you probably thought the book would touch the ground first since it is heavier However, once the piece of paper was crumpled, they hit the ground at the same time! Funny, since it is the same piece of paper and the book is still heavier. It all comes down to form. I hope this helped u with the test !!
Compound A is neutral and Compound B is acidic. Both are water-insoluble solids. A and B are dissolved in dichloromethane (DCM) and extracted with aqueous base. The layers are then separated. What must be done to obtain the compound in the aqueous layer
In order to extract the compound in the aqueous layer, a strong acid must be added to the system.
Liquid - Liquid extraction is a common method for obtaining substances that can partition between two layers. In this case, compound A is neutral and compound B is acidic.
When the both compounds are dissolved in dichloromethane and extracted using an aqueous base, the acid substance will form a salt in the aqueous layer. In order to extract the compound in the aqueous layer, a strong acid must be added to the system.
Learn more: https://brainly.com/question/865531
what is the expected hybridization of the central atom tetrahedral
Answer:
Tetrahedral molecules are normally spy hybridized.
Explanation:
0 000
which explains why it is important to eat a full healthy meal before an oron o ping po
Food provides the carbon dioxide that is a product of cellular respiration
Food provides the oxygen that is a product of cellular respiration
Food provides the glucose that is a reactant in cellular respiration.
Food provides the energy that is a reactant in cellular respiration.
Answer:
A healthy diet is essential for good health and nutrition. It protects you against many chronic noncommunicable diseases, such as heart disease, diabetes and cancer. Eating a variety of foods and consuming less salt, sugars and saturated and industrially-produced trans-fats, are essential for healthy diet.
Learning Task 2: Read each statement or question below carefully and fill in the blank(s) with the best answer by choosing the words inside the box. Write your answers in a separate sheet of paper. cation 1 -ide -ine nonmetals O ion ionic compound anion metals root name 1. Any atom or molecule with a net charge, either positive or negative, is known as en 2. An atom that gains one extra electron forms an with a 1- charge. 3. A positive ion, called a is produced when one or more electrons are lost from a neutral atom. 4. Unlike a cation, which is named for the parent atom, an anion is named by taking the of the atom and changing the ending. 5. The name of each anions is obtained by adding the suffix to the root of the atom name. 6. The always form positive ions. 7. on the other hand, form negative ions by gaining electrons. 8. It is very important to remember that a chemical compound must have a net charge of
Disadvantage and advantage of iodine ?
- umoren sŭm..
THE ADVANTAGE OF IODIN
IODINE CAN LEAD TO GOITER AND OTHER THYROID PROBLEMS.THE DISADVANTAGE OF IODIN
IODIN MAY LEAD TO THYROIDITIS AND THYROID PAPILLARY CANCERA sample of crude sodium iodide was analysed by the following rection.
I- + SO42- → I2 + H2S (unbalanced)
a)Determine the oxidation number for S in SO42-.
b)The above reaction requires a basic medium. Write the balanced chemical equation. [6 marks]
A sample of crude sodium iodide was analyzed by the following balanced reaction. The oxidation number of S in SO₄²⁻ is +6.
8 I⁻ + 6 H₂O + SO₄²⁻ → 4 I₂ + H₂S + 10 OH⁻
Let's consider the following unbalanced redox reaction.
I⁻ + SO₄²⁻ → I₂ + H₂S
The oxidation number of I goes from -1 (I⁻) to 0 (I₂) so it is oxidized.The oxidation number of S goes from +6 (SO₄²⁻) to -2 (H₂S) so it is reduced.The corresponding half-reactions are:
I⁻ → I₂
SO₄²⁻ → H₂S
We will perform the mass balance adding OH⁻ and H₂O where appropriate.
2 I⁻ → I₂
6 H₂O + SO₄²⁻ → H₂S + 10 OH⁻
Then, we will perform the charge balance adding electrons where appropriate.
2 I⁻ → I₂ + 2 e⁻
8 e⁻ + 6 H₂O + SO₄²⁻ → H₂S + 10 OH⁻
Finally, we will multiply the first half-reaction by 4 and the second by 1, and add them.
4 × (2 I⁻ → I₂ + 2 e⁻)
1 × (8 e⁻ + 6 H₂O + SO₄²⁻ → H₂S + 10 OH⁻)
------------------------------------------------------------
8 I⁻ + 6 H₂O + SO₄²⁻ → 4 I₂ + H₂S + 10 OH⁻
A sample of crude sodium iodide was analyzed by the following balanced reaction. The oxidation number of S in SO₄²⁻ is +6.
8 I⁻ + 6 H₂O + SO₄²⁻ → 4 I₂ + H₂S + 10 OH⁻
Learn more: https://brainly.com/question/2671074
Which two substances are reactants in the chemical reactions of cellular respiration?
Answer:
The answer is A and C.
Explanation:
The reactants in the process of cellular respiration are oxygen and glucose, respectively. It is ATP that serves as the primary product of cellular respiration, with carbon dioxide and water serving as waste products.
Sugar is a glucose.
Oxygen and glucose are the two substances that are reactants in the chemical reactions of cellular respiration. Therefore, the correct options are options A, C.
What is cellular respiration?Through the process of cellular respiration, organisms mix oxygen with food molecules, directing the chemical energy contained in these substances towards life-sustaining processes while excreting carbon dioxide and water as waste. Foods are broken down by microorganisms that do not require oxygen in a process known as fermentation.
Adenosine triphosphate (ATP), an energy-rich compound that absorbs the chemical energy generated by the decomposition of food molecules then releases it to power other cellular functions, is one goal of the breakdown of foodstuffs. ATP is created when the energy found inside chemical bonds is converted from one form to another. Oxygen and glucose are the two substances that are reactants in the chemical reactions of cellular respiration.
Therefore, the correct options are options A, C.
To know more about cellular respiration, here:
https://brainly.com/question/29760658
#SPJ2
In an acid/base titration where NaOH(aq) is the titrant and HCl(aq) is the analyte, what is true about the moles of each reactant present in the reaction flask at the equivalence point?
A. The moles of NaOH are equal to moles of HCl.
B. There are more moles of NaOH than HCl.
C. There are more moles of HCl than NaOH.
D. The concentrations are needed to determine moles.
[tex]\huge{\color{magenta}{\fcolorbox{magenta}{black}{\huge{\color{white}{\fcolorbox{aqua}{black}{✿ᴀɴsᴡᴇʀ✿}}}}}}[/tex]
A) The moles of NaOH are equal to moles of HCl.
Explanation:
NaOH + HCl ↦NaCl + H20
