The main characteristics of Romanticism are - Glorification of Nature ,Awareness and Acceptance of Emotions, Celebration of Artistic Creativity and Imagination, Emphasis on Aesthetic Beauty.
Popular in the late 18th and early 19th centuries, Romanticism was defined as the literary movement that emphasized the nature and the importance of the emotion and the artistic freedom.
The characteristics described as :
Glorification of Nature
Nature, in all its unbound glory, plays the huge role in the Romantic literature. Nature, sometimes seen just opposite of the rational, is a powerful symbol in work from this era.
Awareness and Acceptance of Emotions
A focus on emotion is one of the key characteristic of nearly all writing from the Romantic period.
Celebration of Artistic Creativity and Imagination
In contrast to the previous generations focus on reason, writers of the Romantic movement also explored the importance of the imagination and the creative impulse.
Emphasis on Aesthetic Beauty
Romantic literature also explores the theme of the aesthetic beauty, not just of the nature but of people as well. This was especially true when female beauty is described .
To know more about Romanticism, visit here:
https://brainly.com/question/821735
#SPJ4
a frame for a picture is 2 inches wide. the picture inside the frame is 4 inches lon-ger than it is wide. see the figure. if the area of the picture is 320 square inches, find the outside dimen-sions of the picture frame
If the area of the picture is 320 square inches, the outside dimensions of the picture frame would be 18 & 22 inches respectively.
What is area?It is the extent or measurement of a surface or piece of land.
As the question is mentioned about picture frame so it's going to be width times length to get the area of the picture frame or the picture itself.
How to calculate the outside dimensions of this picture frame?
Picture dimensions
width = x inches
length = x + 4 inches
area = 320 sq inches
X * (X+4) = 320
x^2 + 4x - 320 = 0
x^2 + 20x - 16x - 320 = 0
x (x+20) - 16(x+20) = 0
So X = 16, -20
dimension will not be negative so 16 is the only answer
picture dimension =
16 inches (width)
20 inches (length)
so the dimension of picture frame =
16 + 2 = 18 inches (width)
20 + 2 = 22 inches (length)
Learn more about area https://brainly.com/question/15864082
#SPJ4
a 1.1 kg mass suspended from a spring oscillates with a period of 2.2 s. how much mass must be added to the object to change the period to 5.2 s?
The mass must be added to the object to change the period to 5.2 s is 0.31 kg .
A time period (T) is the quantity of time it takes with one full cycle of vibration that passes over a selected vicinity. The time period of such a wave reduces as its increases in frequency. The time length is measured in 'seconds.
The time period is the time taken via a whole cycle of the wave to skip a factor. Angular frequency is the angular displacement of any element of the wave in line with a unit of time. The smallest interval of time after which the motion of the particle is repeated is called the length of oscillation. The time taken for one entire to the fro motion of a particle is called the duration of oscillation.
Calculation:-
T = 2π√m/k
So time period is directly proportional to √m.
(T1/T2) = √(m1/m2)
T1 = 2.2 s
T2 = 5.2 s
m1 = 1.1 kg
m2 = m1 + m = 1.1 + m
m = ?
( 2.2/ 5.2) = √(1.1 )/(1.1+m)
Squaring on both sides
( 2.2/ 5.2)² =(1.1 )/(1.1+m)
0.18 =(1.1 )/(1.1+m)
0.470+m = 0.921
m = 0.31 kg
So a mass of m = 0.31 kg should be added to the object to get a period of 5.2 s
Learn more about the time period here:-https://brainly.in/question/14087964
#SPJ4
1. a weather balloon travels upward for 6 kin while the wind blows it 10 kin north and 8 km east. approximately what is its final displacement from its initial position?
Final displacement is 200 meters up and northeast of the launch, or 14.14 kilometers.
What distinguishes distance from displacement?Distance is the total distance along the route between any two points. Displacement is the direct distance between any two points when calculated via their shortest route. The direction is just not taken into account while calculating distance. The direction was taken into account when calculating displacement.
What is displacement defined in one word?The shortest (straight line) distance between a body's initial position and its final position—represented by an arrow pointing from the starting position to the final position—is referred to as the body's displacement when it moves from one position to another.
[tex]Final displacement = \sqrt{6^2 + 10^2 + 8^2} \\Final displacement = \sqrt{36 + 100 + 64} \\Final displacement = \sqrt{200}\\ Final displacement = 14.14 km[/tex]
To know more about displacement visit:
https://brainly.com/question/11934397
#SPJ4
a 0.140-kg baseball traveling 39.0 m/s strikes the catcher's mitt, which, in bringing the ball to rest, recoils backward 15.0 cm . What was the average force applied by the ball on the glove?
The average force acting on the baseball is 709.8 N. The result is obtained by using the Newton's second law.
What is Newton's second law?The Newton's second law states that "The acceleration is directly proportional to the net force acting on an object and inversely proportional to the object's mass." It can be expressed as
a = ∑F / m
Where
a = acceleration∑F = net forcem = object's massA 0.140 kg baseball travelling 39.0 m/s strikes the catcher's mitt. It then makes the ball to rest and recoils backward 15.0 cm. What was the average force applied by the ball on the glove?
We have:
Initial seed, v₁ = 39.0 m/s.Final speed, v₂ = 0.Displacement, d = 15.0 cm = 0.15 m.The baseball moves from a certain speed to rest. So, it has acceleration. We can get acceleration with the kinematic equation.
v₁² = v₂² - 2ad
39² = 0 - 2a × 0.15
1521 = - 0.3a
a = - 5070 m/s²
The (-) sign means the object is slowing down.
Using the Newton's second law, the average force is
a = ∑F / m
F = ma
F = 0.140 × 5070
F = 709.8 N
Hence, the average force applied by the ball on the glove is 709.8 Newton.
Learn more about Newton's second law here:
brainly.com/question/10676812
#SPJ4
Two two key problems for controlled fusion on earth are _______ and containment.
The two key problems for controlled fusion on earth are temperature and containment.
How does controlled fusion work?Controlled fusion means to use magnetic fields to contain and confine a high temperature plasma of tritium and deuterium by using a tokama vessel that contains a strong helical magnetic field that couriers charged particles along the vessel.
The difficulties involved with controlled fusion energy is the temperature it requires in order to produce the necessary amount of fusion power it needs from the ionized gas, plasma. It is also difficult to contain the radioactive elements that result from fusion.
Learn more on fusion here: https://brainly.com/question/28185419
#SPJ1
the mass of solute per 100 ml of solution is abbreviated as (m/v). mass is not technically the same thing as weight, but the abbreviation (w/v) is also common.
The mass of solute in step with a hundred mL of solution is abbreviated as m/v.
Mass is not technically the equal issue as weight, however, the abbreviation (w/v) is also commonplace. Mass percent: The mass percent is used to express the awareness of an answer whilst the mass of a solute and the mass of a solution is given: Mass percentage=Mass of SoluteMass of answer×one hundred%
Mass the fluid, locate its extent, and divide mass with the aid of extent. To mass the fluid, weigh it in a container, pour it out, weigh the empty box, and subtract the mass of the empty container from the full field. To locate the volume of the fluid, you simply degree it very carefully in a graduated cylinder.
The common mass of one H2O molecule is eighteen.02 amu. The number of atoms is a precise range, and the number of moles is a specific quantity; they do now not have an effect on the range of vast figures. The common mass of 1 mole of H2O is 18.02 grams. that is stated: the molar mass of water is 18.02 g/mol.
Learn more about the mass of solute here:-https://brainly.com/question/28395798
#SPJ4
TRUE/FALSE. in general, there are 6 useful kinematics equations that we use to describe 2d motion. in the case with a projectile, this reduces to 4 useful equations.
There is a vertical and a horizontal component to the motion in two-dimensional projectile motion, such as that of a football or other thrown object.
Given statement is True.
What is 2D kinematics projectile motion?One of the simplest types of motion is that with a constant velocity. When there is little to no friction present, such as when a hockey puck slides across ice, this type of motion—which is similar to that of a puck sliding across ice—occurs. An object needs to be moving at a constant speed and in the same direction to have a constant velocity. The object is limited to moving in a straight line by constant direction.In accordance with Newton's second law, an object should accelerate if a force is applied to it (F=ma in math). No external forces should be acting on the object if the acceleration is zero. The following is a mathematical illustration of this:[mathrm a=frac dv dt = 0 v=const.]
If an object is moving at a constant speed, the graph of distance vs. time (mathrmx vs. mathrmt) displays the same change in position over each unit of time. Accordingly, the motion of an object moving at a constant speed is depicted by a straight line: (mathrm)x=x 0+vt, where (mathrm)x 0) is the displacement at (mathrm)t=0.If you know the trajectory of an object over time, you can also calculate its velocity. We can determine the velocity from a graph like in by dividing the change in distance by the change in time. The velocity can be thought of as the slope of the line in terms of graphs. The direction of our slope, which represents the velocity, can be either positive or negative. This reveals the object's motion's direction.To Learn more About two-dimensional projectile motion refer to:
https://brainly.com/question/12872985
#SPJ4
In this problem, you will use Lenz's law to explore what happens when an electromagnet is activated a short distance from a wire loop.
You will need to use the right-hand rule to find the direction of the induced current. When the switch is open, which of the following statements about the magnetic flux through the wire loop is true? Assume that the direction of the vector area of the wire loop is to the right.
A) There is no magnetic flux through the wire loop.
B) There is a positive flux through the wire loop.
C) There is a negative flux through the wire loop.
A (When the switch is open, there is no current flowing in the circuit. Thus, the electromagnet does not produce a magnetic field, and the flux is zero.)
There is no magnetic flux through the wire loop, Thus, the electromagnet does not produce a magnetic field
A magnetic field, an electric current, a fluctuating electric field, or the vector field surrounding a magnet can all be used to monitor magnetic forces. Permanent magnets such as magnetic compass needles point in the general direction of magnetic fields similar to those on Earth. In magnetic fields, electrically charged particles move in a helical or circular manner. This force, which is applied to electric currents through wires in a magnetic field, drives electric motors.
From the south to the north magnetic poles, magnetic fields can be seen as continuous lines of force or magnetic flux. The density of the lines indicates the strength of the magnetic field. A magnet has one or more poles that are
To know more about magnetic field visit : https://brainly.com/question/24397546
#SPJ4
one result of the analysis of the properties of clusters of galaxies that is very surprising and difficult to account for is that
The result of the analysis which is difficult to account for is that a)the galaxies in each cluster appear to be moving away from each other, indicating that the clusters probably came into existence in separate mini Big Bang explosions. So, correct option is a.
A galaxy cluster, or a cluster of galaxies, is the structure that consists of anywhere from hundreds to thousands of the galaxies that are bound together by the gravity, with typical masses ranging from 1014 to 1015 solar masses. They are actually second-largest known gravitationally bound structures in this universe after galaxy filaments and were believed to be the largest known structures in this universe until the 1980s.
Hence, correct option is a.
To know more about Galaxy, visit here:
https://brainly.com/question/24836631
#SPJ4
(Complete question) is:
one result of the analysis of the properties of clusters of galaxies that is very surprising and difficult to account for is that
a. the galaxies in each cluster appear to be moving away from each other, indicating that the clusters probably came into existence in separate mini Big Bang explosions.
b. the mass of the easily visible matter (stars, and so on) appears to be insufficient to hold the systems together gravitationally.
c. each cluster is isolated from other clusters by the vast void that has probably been cleared out by the gravitational field of the cluster
the mass is increased by a factor of four, keeping a and k constant. what is true about the total mechanical energy? choose the best answer.
When the mass is increased by a factor of four, keeping a and k constant mechanical energy increases by a factor of 4.
When mass is twice, what happens to the spring constant?The mass that is linked to the spring has no bearing on its force constant. As a result, it remains unchanged by the attached mass.
If the force is doubled and the mass remains constant, what will happen to the acceleration?The acceleration of an object rises proportionally to the force applied to it. We can state that force and acceleration are identical because the mass does not change when the acceleration rises. So, doubling the force also doubles the acceleration.
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ4
Straight voltage rated circuit breakers of the proper voltage rating (where the voltage rating is greater than the system line-line voltages) are allowed to be used on which of the following voltage systems?
1. 120V, single-phase, 2 W, solidly grounded
2. 120/240V, single-phase, 3W, solidly grounded
3. 208Y/120V, 3-phase, 4W, solidly grounded
4.240V, 3-phase, 3W, ungrounded or corner ground delta
5. 480Y/277V, 3-phase, 4W, solidly grounded
6.480V, 3-phase,3W, ungrounded or high resistance grounded
7. 600Y/347V, 3-phase, 4W, solidly grounded
8. 600V, 3-phase, 3W, Solidly grounded
a. 1 and 2
b. 2,3,4,5, and 6
c. all voltage systems apply
d. straight voltage rated circuit breakers are not to be used
Straight voltage rated circuit breakers are not to be used.
The difference in electric potential per unit charge between two sites in an electric field is referred to as voltage. The letters "V" or "E" are used to represent voltage in calculations and other mathematical contexts. The force that propels electrons through the circuit is produced by the voltage or potential difference.
A larger flow of electrons will cross the circuit with increased voltage and force. Without a difference in voltage or potential, electrons would randomly travel through a vacuum. Another name for voltage is electric tension. For example, low tension, high tension, and super tension cables' respective voltage handling capacities are referred to as 1, 11, and 33 kV.
To know more about Voltage visit : brainly.com/question/13521443
#SPJ4
What happens when an electrically charged object is placed close to another object that is uncharged?.
The correct option is A.
The statement that will correct the error in Edwin's notes is as follows:
An electrically charged object needs to touch an uncharged object before they attract or repel.
How do electrically charged objects produce attraction?
The electrically charged objects produce attraction of oppositely charged objects. For example, if a positively charged object and a negatively charged object bring close to each other, they interact with one another. Their forces act in the same direction. i.e. from the positive to the negative charge.
There is an interaction between two oppositely charged objects required in order to furnish attraction, while there is an interaction between two identical charged objects required in order to furnish repulsion.
Therefore, whether it is attraction or repulsion, it must be required that an electrically charged object needs to touch an un-charged object.
To learn more about charged objects, refer to the link: brainly.com/question/23656531
#SPJ4
[NOTE: THIS IS AN INCOMPLETE QUESTION. THE COMPLETE QUESTION IS:
What happens when an uncharged object is placed close to a charged object, the objects can attract or repel each other. When two electrically charged objects is placed closed to another object that is uncharged?
A) An electrically charged object needs to touch an uncharged object before they attract or repel.
B) When an electrically charged object comes close to an uncharged object, it will attract it.
C) If an electrically charged object is near an uncharged object, it will repel it.
D) When two electrically charged objects are placed close together, they only attract.]
Write a program that is given two integers representing a speed limit and driving speed in miles per hour (mph) and outputs the traffic ticket amount. Driving 10 mph under the speed limit (or slower) receives a $50 ticket. Driving 6 - 20 mph over the speed limit receives a $75 ticket. Driving 21 - 40 mph over the speed limit receives a $150 ticket. Driving faster than 40 mph over the speed limit receives a $300 ticket. Otherwise, no ticket is received.
The C program that gives the fine considering the speed limit and the velocity is given as follows:
int main(){
int velocity, limit;
scanf("%d\n%d\n", &velocity, &limit);
int fine;
if(velocity <= limit - 10)
fine = 50;
else if(velocity >= limit + 6 && velocity <= limit + 20)
fine = 75;
else if(velocity >= limit + 21 && velocity <= limit + 40)
fine = 150;
else if(velocity >= limit + 40)
fine = 300;
else
fine = 0;
printf("The fine is of: %d\n", fine);
return 0;
}
How to build the C program?The first features of the program are the standard notations of the C programming language, with the declaration of the main() section, as follows:
int main(){
return 0;
}
Then the variables are declared and read, as follows:
int velocity, limit;
scanf("%d\n%d\n", &velocity, &limit);
Then the fine variable is declared, the conditional calculates the fine, and the printf() command prints the fine.
More can be learned about C programs at brainly.com/question/15683939
#SPJ1
How do quotas impact domestic consumers?.
Rising domestic prices paid by consumers.
Import quotas restrict market access for imported products. The result is usually higher domestic prices paid by consumers. This leads to lower consumer surplus and lower real incomes. It may also reduce the choice consumers have in the market.
Countries sometimes impose quotas on certain products in order to reduce imports and increase domestic production. In theory, quotas increase domestic production by limiting competition with foreign countries. Government programs that enforce quotas are often referred to as protectionist policies. Import quotas limit the number of certain goods that can be imported.
Learn more about Quotas here:-https://brainly.com/question/24916775
#SPJ4
a typical pair of off-the-shelf reading glasses has 2.0 d lenses. what is the focal length of these lenses?
The focal length of these lenses is 50cm.
Solution:
Write the expression for the relationship between the power (P) and focal length (f) of a lens.
P = 1/F
From the above expression, the focal length of the given lenses can be determined as follows.
P = 1/F
F = 1/P
= 1/2.0D
= 5D⁻¹ (1M/1D⁻¹ )
= 0.5 M
= 50cm
The focal length of a lens is determined when the lens is focused to infinity. The focal length of a lens indicates its angle of view and magnification. The longer the focal length the narrower the angle of view and the higher the magnification.
Learn more about The focal length here:- https://brainly.com/question/25779311
#SPJ4
what has happened to the number of barred spirals, compared to the total number of spirals, over time as the universe has aged?
The proportions of barred spirals relative to unbarred spirals likely have changed throughout the history of the universe, with only about 10% containing rods about 8 billion years ago, to about a quarter of 2.5 billion years ago.
Barred spiral galaxies account for approximately 18% of all the galaxies that have been discovered. Examples are NGC 1365 in the constellation Fornax and NGC 1300.
About Barred Spiral GalaxyA barred spiral galaxy is a spiral galaxy with a central bar-shaped structure consisting of a star at its center. This rod can be found from half of all spiral galaxies. Bars generally affect the movement of stars and interstellar gas within spiral galaxies and can also affect spiral arms. The Milky Way galaxy, in which the solar system is located, is classified as a barred spiral galaxy.
Edwin Hubble classifies this type of spiral galaxy as "SB" (spiral, barred) in the Hubble classification and arranges them into sub-categories or sub-groups based on how open the spiral arms are.
Learn more about spiral galaxy at https://brainly.com/question/28644362.
#SPJ4
a bird is flying with a speed of 16.6 m/s over water when it accidentally drops a 2.10 kg fish. the acceleration of gravity is 9.81 m/s 2 . if the altitude of the bird is 7.20 m and air resistance is disregarded, what is the speed of the fish when it hits the water?]
The speed of the fish is 20.411 m/s
We are given that,
Initial speed = u =16.6m/s
Mass of fish = m = 2.10kg
Altitude of the bird = h = 7.20m
Acceleration due to to gravity = a = 9.8m/s²
Thus equation of motion can be given by the formula ,
h = ut + (1/2)at²
If taking initial velocity is zero then ut = 0, thus above equation can be written as,
t² = (2 × 7.20m)/9.8m/s²
t² = 1.469s
t = 1.212 sec
Then the vertical velocity after 1.212sec can be calculated as,
Vy = u + gt
Vy = 0 + 9.8m/s²× 1.212sec
Vy = 11.8776m/s
Horizontal velocity will be same as the initial velocity,
Vnet = √u² +V²y
Vnet = √(16.6m/s)²+(11.8776m/s)²
Vnet = 20.411 m/s
Therefore , the speed of the fish would be 20.411m/s
To know more about speed
https://brainly.com/question/7367686
#SPJ4
a cannon mounted on a pirate ship fires a cannonball at 125 m/s horizontally, at a height of 17.5 m above the ocean surface. ignore air resistance. a. how much time elapses until it splashes into the water? b. how far from the ship does it land?
The time elapses until it splashes into the water is 1.889 s and horizontal distance is 236.227 m/s
Speed V = 125m/s
height h = 17.5 m
time elapse t = [tex]\sqrt{2h/g}[/tex] = 1.889 s
horizontal distance = vt = 236.227 m/s
As you go closer to Earth, time slows down because, as Einstein proposed in his theory of general relativity, the gravity of a massive object like Earth warps space and time.
On a cosmic scale, such as when a star is passing by a black hole, scientists first noticed this "time dilation" phenomenon. Then, in 2010, researchers used two incredibly accurate atomic clocks, one positioned 33 cm higher than the other, to see the same phenomenon on a much smaller scale. Time passed more slowly for the clock that was located closer to Earth.
Learn more about time elapses here:
https://brainly.com/question/15372069
#SPJ4
a prime mover is exerting a torque of 4 n-m on the shaft of a generator, driving it at 1781 rpm. find the mechanical power output of the prime mover in watts.
The mechanical power output of the primer mover in watts is 745.86 Watts.
The torque exerted by the prime mover is 4N-m.
The driving shaft is rotated with speed of 1781 rpm.
It means in one minute the shaft makes 1781 revolutions,
So, in one second,
1 second = 1781/60
In one revolution, the radian cover are 2π.
Hence, the angular speed of the shaft in radian per seconds is,
W = 1781/60 x 2π
W = 186.41 rad/s.
Now, the mechanical power output can be found as,
P = Torque x W
Putting values,
P = 4 x 186.41
P = 745.65 Watt.
So, the power output is 745.65 Watt.
To know more about power, visit,
https://brainly.com/question/1634438
#SPJ4
as you move an electron away from a proton, the potential emeregy of the interaction increases because
It will have more potential energy. This is so that the force of repulsion can be overcome in order to bring two protons together. Potential energy is the form in which this is kept.
Potential energy is the energy that is held in reserve in any system or object as a result of how its components are positioned or assembled. The external environment, such as air or height, is not a factor in this, though. The energy that an object or a system's particles have while in motion, however, is known as kinetic energy. Kinetic energy is present in anything in your house that moves. This might be the sound of a cue ball rolling on a pool table, the air being circulated by a fan on a hot day, or the breaking of glass as it drops from the counter and lands on the ground. Both individuals moving about the house and electrical appliances that are on both require kinetic energy.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ4
suppose that at a certain instant the velocity of the cylinder is v . what is its total kinetic energy, ktotal , at that instant?
The total kinetic energy of cylinder at that instant is (1/2)mv² where m is the mass of the cylinder.
Kinetic energy is actually acquired by the body when it is travelling with some speed. In this universe energy never creates never destroy, it actually converts from one form to another.
Kinetic energy has various types like:
Rotational kinetic energy Radiant kinetic energyThermal kinetic energySound kinetic energyElectrical kinetic energy.When any body is holding any particular height, in that case it has potential energy.
There are various theorems which are actually derived from the kinetic energy. One of them is work energy theorem.
We know very well that formula of kinetic energy is (1/2)mv²
Hence,[tex]K_t_o_t_a_l[/tex] is (1/2)mv².
To know more about kinetic energy, visit here:
https://brainly.com/question/23522620
#SPJ4
(Complete question) is:
Suppose that at a certain instant the velocity of the cylinder is v and mass is m. What is its total kinetic energy, [tex]K_t_o_t_a_l[/tex] at that instant?
Although there's no "Keep Out" sign on your teenage sister's door, when it's closed and the TV is on, you and your parents know not to disturb her. This is an example of a(n) __________ in a family
Although there's no "Keep Out" sign on your teenage sister's door, when it's closed and the TV is on, you and your parents know not to disturb her. This is an example of a(n) implicit rule in a family
What exactly is an implicit connection?a formula or relationship where the dependent variable is not located solely on one side. Implicit rules are frequently those that are seen as cultural norms for acceptable behavior in romantic relationships (e.g., monogamy and secrets kept private).
Unspoken guidelines for family organization, intimacy, and communication are referred to as implicit family process norms. These guidelines may have a significant impact on adolescents' psychological health.
Therefore, Implicit rules explain how to use societal norms such that you don't need to be explicit about them when you want to apply them. For C compilation, for instance, there is an implicit rule. Which implicit rules are executed depends on file names. For instance, the compilation of C frequently requires.
Learn more about implicit rule from
https://brainly.com/question/28137444
#SPJ1
when alpha particles of kinetic energy e are incident on nuclei of gold atoms, the smallest distance between an alpha particle and a nucleus is x. what is the smallest separation distance when the alpha particle kinetic energy is doubled to 2e
smallest separation distance when the alpha particle kinetic energy is doubled to 2e is x/2.
what is distant of closest aproach?The distance of closest approach of two objects is the distance between their centers when they are externally tangent. The objects may be geometric shapes or physical particles with well defined boundaries
At distance of closest approach speed of -particles is zero.At the instant of closest approach the initial kinetic energy of the particle will be completely converted into electric potential energy
kinetic energy is inversly proportional to distance.so if energy increases distance decreases by twolearn more about distance of closest aprroach:https://brainly.com/question/14696284
#SPJ4
5. a certain wheel has a rotational inertia of 12 kgm2. as it turns through 5.0 rev its angular velocity increases from 5.0 rad/s to 6.0 rad/s. if the net torque is constant, its value is:
Basically, a measurement of an object's torque is 12 kgm², resistance to a change in its state of motion is what a is having constant value.
A body's resistance to a change in its angular momentum is measured by its mass moment of inertia. On the other hand, it is also possible to state that it is the change in angular momentum brought about by a unit change in angular velocity. The flexural stiffness of a beam is gauged by the area moment of inertia. A beam's resistance to bending deflections is essentially measured by this metric. Since it is independent of material, you could define it as a cross-section's ability to withstand applied bending.Hence , Torque= M( moment of inertia ) = 12 kgm².To know about moment of inertia -
https://brainly.com/question/29415485
#SPJ4
based on the data in the diagrams, in which layer of the atmosphere would short wave radio signals be reflected? responses stratosphere stratosphere mesosphere mesosphere thermosphere thermosphere exosphere
The region of the atmosphere where the radio waves are scattered is the thermosphere .
What are radio waves?Radio waves are part of the electromagnetic spectrum. They are the waves that are able to travel a long distance because they have a very long wavelength and as a consequence they do have a low energy of the radiation.
Now we know that the atmosphere is composed of different spheres and the sphere that are in the atmosphere are classified based on the composition of each of these layers of the atmosphere.
The area of the atmosphere where there would be the scattering of the radio waves is in the region where it knocks off ions from the molecules of air. This area that we are referring to is the part that we call the thermosphere and ions are found there.
Learn more about radio waves:https://brainly.com/question/21995826
#SPJ1
A speck of dirt is embedded 2.50 cm below the surface of a sheet of ice having a refractive index of 1.309.What is the apparent depth of the speck, when viewed from directly above?
Consequently, 2.67 cm is the apparent depth.
to solve the equtions, s′=−(na/nb)s=−(1.0/1.309)(3.5 cm)=−2.67 cm
What is an optical refractive error?One of the most typical eye conditions is refractive error. It develops because when eye's ability to concentrate on exterior images effectively is disrupted. Refractive errors cause hazy vision, which can occasionally be so bad that it impairs vision.
The refractive effect is what?Refraction is the term for the curving of light as it passes through transparent materials (it also occurs with sound, water, and other waves). We are able to create lenses, magnifying glasses, prisms, and rainbows because to this bending caused by refraction. Even our eyes rely on this light bending.
To know more about Refractive visit:
https://brainly.com/question/14760207
#SPJ4
light of wavelength 640 nm is shone on a double-slit apparatus and the interference pattern is observed on a screen. when one of the slits is covered with a very thin sheet of plastic of index of refraction n
light of wavelength 640 nm is shone on a double-slit apparatus and the interference pattern is observed.minimum thickness off plate so that screen becomes dark at centre is 533nm.
what is interfernece pattern?Under these conditions, the points of constructive and destructive interference form a complex pattern, which we will refer to as an interference pattern. To begin the discussion, consider two sources of sound that give off waves in all directions. One source and wave is colored red, while the other is green
Interference Meaning. There are 5 meaning (s) for word Interference. Interference Meaning 1 : the act of hindering or obstructing or impeding. Synonyms : hinderance, hindrance. Interference Meaning 2 : electrical or acoustic activity that can disturb communication. Synonyms : disturbance, noise. Interference Meaning 3 : a policy of intervening ...
The geometrical path length from each slit to the center of the diffraction pattern is the same. Let the thickness of the plastic sheet be x. The optical path length through the plastic sheet is nx and the optical path length difference is therefore (n - 1)x. We need (n - 1)x = λ/2, for the minimum thickness n.
Alternatively:
Reaching the slits, the waves passing the slits are in phase. Upon exiting the slits they have a phase difference (k' - k)x = (2πn/λ - 2π/λ)x = (2π/λ)(n - 1)x.
For the minimum thickness we need (2π/λ)(n - 1)x = π, x = λ/(2(n-1)) = λ/1.2 = 533 nm. The minimum thickness is 533 nm.
learn more about interference :https://brainly.com/question/17151051
#SPJ4
Gamma rays and visible light are both choose. But gamma rays have choose. Than visible light.
While both electromagnetic radiation and visible light have energy, gamma rays have a higher energy level.
The electromagnetic spectrum is defined as the range of frequency of electromagnetic radiation and their respective wavelength. The electromagnetic spectra is following:
Gamma rays =[tex]10^{-14}[/tex] to [tex]10^{-12}[/tex]
X-rays = [tex]10^{-12}[/tex] to [tex]10^{-10}[/tex]
Ultraviolet rays = [tex]10^{-10}[/tex] to [tex]10^{-8}[/tex]
visible light = [tex]10^{-8} to 10^{-6}[/tex] (380 - 740 nm)
Infrared rays = [tex]10^{-6} to 10^{-4}[/tex]
Radar = [tex]10^{-4} to 10^{-2}[/tex]
FM = [tex]10^{-1} to 1[/tex]
Within the range there are frequency of both visible and gamma radiation.
From the electromagnetic spectra it is seen that the gamma have much shorter wave length than visible light.
and we know that
E = hc/λ
E is directly proportional to 1/λ
So, smaller wave length have more energy. Hence gamma rays have more energy than visible light.
Learn more about Visible light here:
https://brainly.com/question/9166407
#SPJ4
What are the 7 types of electromagnetic waves in order of increasing frequency?.
They can be radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays, in that order of increasing frequency/decreasing wavelength.
The radio, visible light, and X-ray wave frequencies are all included in the electromagnetic (EM) spectrum. All electromagnetic waves are composed of photons, which move through space before interacting with matter in one way or another. EM waves are all instances of the same phenomena, notwithstanding the sciences' broad classification of them into seven fundamental categories.
The lowest frequency waves in the electromagnetic spectrum are radio waves. Other signals can be transmitted by radio waves to receivers, which then convert them into useful data. There are many things that emit radio waves, both natural and man-made.
To know more about waves
https://brainly.com/question/15358769
#SPJ4
rank the forms of light from left to right in order of increasing frequency. to rank items as equivalent, overlap them.
Sort the light forms in increasing frequency from left to right. Radio waves, infrared, visible light, ultraviolet, X, and gamma rays are used to rank the items as being equal.
What, for instance, are radio waves?Sound is transmitted to a big audience through Am to FM radio broadcasting. Radio waves are used by radar, a detection technology, to gather information about things. Radio waves are used by Bluetooth enabling wireless communication to link devices.
How and where are radio waves used?For television and FM too Am radio broadcasts, handheld radios, mobile phones, directional antenna, wireless communications networks, and a variety of other communications applications, radio waves at different frequencies are employed. Most radio waves can readily travel through the atmosphere of Earth.
To know more about radio waves visit:
https://brainly.com/question/13989450
#SPJ4
