what is newtons to kg?

8.09 C of charge is present on each electrode.

Each electrode has an 8.09 C charge (microcoulombs).

Using the equation Q = CV, where Q denotes the charge, C the capacitance, and V the potential difference, this may be determined. The formula C = A/d can be used to compute capacitance, where A is the area of the electrodes, d is the distance between them, and is the permittivity of free space.

We may calculate C as follows by plugging in the supplied values: C = (8.85 x 10-12 F/m)(0.06 m x 0.06 m)/(0.001 m) = 3.186 x 10-11 F.

Once this is done, Q = CV = (3.186 x 10-11 F)(9.0 V) = 2.8674 x 10-10 C = 8.09 C.

To know more about metal electrodes visit:

https://brainly.com/question/13593872

#SPJ4

40 degrees Fahrenheit is equal to 4.4 degrees celsius.

To convert Fahrenheit (°F) to Celsius (°C), you can use the following formula:

°C = (°F - 32) * 5/9

The process of translating a temperature from one scale to another is referred to as temperature conversion. Temperature conversions between the several regularly used temperature scales, including Celsius, Fahrenheit, and Kelvin, are frequently required.

where the temperature is expressed in degrees Fahrenheit (°F) and degrees Celsius (°C).

Plugging in 40 °F into this formula, we get:

°C = (40 - 32) * 5/9

= 8 * 5/9

= 40/9

≈ 4.4 °C

Therefore, 40 °F is equal to 4.4 degrees celsius.

To learn more about Celsius :

https://brainly.com/question/20697375

#SPJ4

Answer:

Option.D Red

Explanation:

Red stars usually have the lowest surface temperature.

The speed of sound at 21∘C is approximately 344.1 m/s. For a frequency of 3 kHz, the wavelength is approximately 0.11 meters.

The formula for the speed of sound in air is given by,

v = 331.5 + 0.6T

where v is the speed of sound in meters per second, and T is the temperature in degrees Celsius.

Plugging in T = 21∘C,

v = 331.5 + 0.6(21) = 331.5 + 12.6 = 344.1 m/s

The wavelength of a sound wave is,

λ = v/f

where λ is the wavelength in meters, v is the speed of sound in meters per second, and f is the frequency in hertz.

Plugging in v = 344.1 m/s and f = 3 kHz (or 3000 Hz),

λ = 344.1/3000 = 0.1147 m

To know more about the wavelength, here

brainly.com/question/13533093

#SPJ4

A  radioactive tracer atom with carrier molecules attached to them. They are used in alternate medicine known as radioactive medicine therapy.

Using radioactive tracers (also known as radiopharmaceuticals) to diagnose and treat disease, nuclear medicine is a branch of medicine. Doctors are able to follow the passage of these radioactive tracers thanks to specially created cameras. Carrier molecules that are firmly bound to a radioactive atom make up radioactive tracers. Depending on the goal of the scan, these carrier molecules can have many different forms. Some tracers use chemicals that interact with certain body proteins or sugars, and some even use the patient's own cells. A patient receives an intravenous injection of the radioactive tracer for the majority of nuclear medicine diagnostic procedures.

learn more about radioactive tracers here:

https://brainly.com/question/16360352

#SPJ4

0.8 percent strain elongation does the rod undergo when it undergoes a temperature increase of 1000°c

As per given information;

Thermal expansion coefficient = [tex]8\times10^{-5}[/tex]°[tex]C^{-1}[/tex]

The original length of the rod = 10 cm

change in temperature =  1000°c

The change in length of the ceramic rod ΔL can be calculated using the formula:

ΔL = α * L * ΔT

where:

α = thermal expansion coefficient

L = original length of the rod

ΔT = change in temperature

By placing in the values given in the problem,

we get:

ΔL = ([tex]8\times10^{-5}[/tex]°[tex]C^{-1}[/tex]) * (10 cm) * (1000 °C)

ΔL = 0.08 cm

By using the formula we can calculate the percent strain elongation (ε) :

ε = (ΔL / L) * 100%

where:

ΔL denotes a change in the length of the rod

L denotes the original length of the rod

By plugging in the values, we get:

ε = (0.08 cm / 10 cm) * 100%

ε = 0.8%

Therefore, the ceramic rod undergoes a percent strain elongation of 0.8% when it undergoes a temperature increase of 1000°C.

For similar question on strain elongation,

https://brainly.com/question/14954538

#SPJ4

The formula for calculating the coefficient of friction is given by:

μ = F / N.

The coefficient of friction formula is a mathematical equation used to calculate the amount of frictional force that exists between two surfaces in contact with each other.

The coefficient of friction is a dimensionless quantity that represents the ratio of the frictional force between two surfaces to the normal force pressing them together.

The formula for calculating the coefficient of friction is given by:

μ = F / N

where μ is the coefficient of friction, F is the frictional force acting between the two surfaces, and N is the normal force pressing the surfaces together.

The coefficient of friction can have values ranging from 0 to 1. A value of 0 indicates no friction between the surfaces, while a value of 1 indicates maximum friction. The coefficient of friction is an important parameter in many engineering and physics applications, such as in designing brakes for vehicles and calculating the force required to move objects over different surfaces.

Learn more about coefficient of friction:

brainly.com/question/13754413

#SPJ4

Option C) power factor correction is correct, where capacitor does work by storing and releasing energy to improve AC circuits power factor.

A capacitor is a device used in electrical circuits to store and release electrical energy. It is an essential component in many electrical systems and can perform various functions, including producing large current pulses, timing circuits, and power factor correction.

Option (c) Power factor correction is a job that a capacitor can perform in electrical work. In AC circuits, the power factor is the ratio of the real power (in watts) to the apparent power (in volt-amperes), and it measures the efficiency of power utilization in the circuit. When the power factor is less than unity, it means that the circuit is less efficient and is wasting energy.

Capacitors can be used to correct the power factor in AC circuits by storing and releasing energy to offset the reactive power, which results from the lag between the voltage and current waveforms. By doing so, the power factor can be increased to unity, making the circuit more efficient and reducing energy waste. Capacitors used for power factor correction are called power factor correction capacitors, and they are widely used in industries, power plants, and large commercial buildings to improve the power factor of electrical systems.

Learn more about work here:

https://brainly.com/question/29266754

#SPJ4

Voter turnout refers to the percentage of eligible voters who participate in an election by casting a ballot

It is a measure of civic engagement and political participation, and is an important indicator of the health and vibrancy of a democracy.

Voter turnout can be influenced by a variety of factors, including the perceived importance of the election, the accessibility of polling places, the quality of candidates and political campaigns, and the effectiveness of voter education and mobilization efforts.

Low voter turnout is often a cause for concern, as it can lead to a lack of legitimacy for elected officials and a sense of disconnection and apathy among the electorate. High voter turnout, on the other hand, is seen as a positive sign of a healthy and engaged democracy.

In many countries, efforts are made to increase voter turnout through measures such as early voting, mail-in ballots, and voter registration drives

Learn more about Voter turnout here:

https://brainly.com/question/1270103

#SPJ4

Each electrode has a charge of 1.2672 x 10-9 C, and there is a potential difference of 9.0 V between the electrodes.

The charge is 6.336 x 10-9 C on each electrode when the plates are moved apart to a new separation of 2.0 mm.

The potential difference between the electrodes is 9.0 V when the plates are separated by a new 2.0 mm distance.

The charge on each electrode is 1.2672 x 10-9 C, and the potential difference between the electrodes is 9.0 V when the electrodes are initially spaced 1.0 mm apart and linked to a 9.0 V battery. The charge on each electrode remains constant, but the capacitance changes, creating a new potential difference of 9.0 V if the electrodes are then moved apart to a new spacing of 2.0 mm with the cables cut off. In this instance, each electrode has a charge of 6.336 x 10-9 C. Based on the link between charge, capacitance, and potential difference as well as the fundamentals of capacitance, these calculations.

To know more about metal electrodes visit:

https://brainly.com/question/30793139

#SPJ4

Freezing point depression is a phenomenon in which the freezing point of a liquid is lowered when a solute is added to it. An example application of freezing point depression is in the use of antifreeze solutions.

At Freezing point depression, the solution will freeze at a lower temperature than the pure solvent would. This effect occurs because the solute molecules disrupt the regular crystal structure of the solvent as it tries to solidify, making it harder for the solvent to freeze.

Antifreeze is typically a mixture of water and ethylene glycol, which is added to the radiator of a vehicle to prevent the water in the engine from freezing in cold temperatures. By lowering the freezing point of the water, antifreeze allows the engine to operate safely in cold climates without the risk of the coolant freezing and causing damage to the engine.

To know more about the freezing point depression, here

brainly.com/question/30389524

#SPJ4

Answer: It is stronger

Explanation: The electric field=ΔV/Δl where l is the distance between the equipotential lines. Electric field strength is inversely proportional to the change in distance between the lines, so as the distance between the lines shrinks( become closer together) the electric field strength increases given that ΔV remains constant.

A lunar eclipse occurs when the Earth's shadow falls on the Moon.

A lunar eclipse happens when the Earth comes between the Sun and the Moon, with the Earth blocking the sunlight from reaching the Moon's surface. The Earth casts a shadow that extends into space, and when the Moon moves through this shadow, it becomes obscured from the Sun's light, causing a lunar eclipse.

The Earth's shadow is divided into two parts: the outer penumbra and the inner umbra. When the Moon passes through the penumbra, it experiences a partial eclipse, with only a portion of its surface becoming obscured. When the Moon passes through the umbra, it experiences a total eclipse, with its entire surface becoming obscured.

Lunar eclipses are relatively common and can be observed from any location on the Earth where the Moon is visible during the eclipse. They are a spectacular astronomical event, providing a rare opportunity to witness the natural beauty and wonder of our universe.

Learn more about lunar eclipse here:

https://brainly.com/question/30629796

#SPJ4

The statement is True. according to scientists, The Great Salt Lake could go dry in the next five years.

The term "Great Salt" is not a recognized term in physics, and it is unclear what is meant by it. However, if you are referring to the Great Salt Lake, then it is a large saltwater lake located in Utah, USA. As a physical entity, the Great Salt Lake has several interesting properties due to its high salinity.

For example, it is denser than freshwater and can therefore support heavier objects. Its high salt content also lowers the freezing point of water, which means that the lake's surface remains liquid even in extremely cold temperatures. These properties have practical applications, such as for the extraction of minerals from the lakebed and the testing of buoyancy and flotation devices.

To learn more about Great Salt visit here:

brainly.com/question/23528225

#SPJ4

The conflict between Ethiopia and Italy in 1935-36 began with Italy's imperialist expansionist ambitions in East Africa.

In 1896, Ethiopia had successfully resisted Italian colonialism in the Battle of Adwa. However, under the rule of fascist leader Benito Mussolini, Italy sought to establish a new colonial empire and to avenge its defeat.

Italy had been planning the invasion for several years. Italy used modern weapons, including aircraft and tanks, against the poorly equipped Ethiopian forces, and after several months of fighting, Ethiopia was defeated and subsequently occupied by Italy. The war resulted in the deaths of tens of thousands of Ethiopians and Italians and had far-reaching political and economic consequences for both countries.

To know more about the Ethiopia, here

brainly.com/question/9315773

#SPJ4

--The complete question is, What events led to war between ethiopia and italy?--

The soccer ball is moving at a speed of approximately 10.84 m/s just before it hits the player's chest.

The conservation of energy means that there is not any loss of energy but energy changes from one form to another.

To solve this problem, we can use the principle of conservation of energy, which states that the total energy in a system is conserved. In this case, we can assume that the system consists of only the soccer ball.

The initial energy of the soccer ball is given by its kinetic energy:

KE₁= 0.5 x m  x  v₁²

Where m is the mass of the soccer ball and v₁ is its velocity just after being kicked by the goalkeeper.

The final energy of the soccer ball just before it hits the player's chest is given by its potential energy and kinetic energy:

KE₂ + PE₂= m x  g x h₂ + 0.5 x m x v₂²

Where h₂ is the height of the player's chest above the ground, g is the acceleration due to gravity (9.81 m/s²), and v₂is the velocity of the soccer ball just before it hits the player's chest.

Since energy is conserved, we can equate the initial energy to the final energy:

KE₁ = KE₂ + PE₂

Substituting the expressions for KE₁and KE₂+ PE₂, we get:

(0.5 x m x v₁²) = (m x g x h₂) + (0.5 x m x v₂²)

Simplifying and solving for v2, we get:

v₂ = √(v₁² - 2 x g x (h₂ - 0.8))

Substituting the given values, we get:

v₂ = √((33 m/s)² - (2 x 9.81 m/s²) x (1.4 m - 0.8 m))

v₂= 10.84 m/s

Therefore, the speed of the soccer ball will be 10.84 m/s just before it hits the player's chest.

To know more about the conservation of energy follow

https://brainly.com/question/1190004

#SPJ9

Answer:

The tempature of the room.

Explanation:

Due to the temperature of the room being above the ice freezing point, the ice will melt.

The lowest frequency of light that can exist is zero hertz (Hz), which is also known as direct current (DC).

This is because light is a type of electromagnetic radiation that consists of oscillating electric and magnetic fields. These fields oscillate at a certain frequency, and the frequency determines the energy and properties of the light.

However, in the absence of any oscillation, there is no frequency and hence no light. In other words, the lowest frequency of light is no light at all.

It's worth noting that there are other forms of electromagnetic radiation that have frequencies lower than visible light, such as radio waves and microwaves. These types of radiation have frequencies that range from about 3 kilohertz (kHz) to several gigahertz (GHz).

To know more about direct current here

https://brainly.com/question/10715323

#SPJ4

The negatively charged particles emitted from a nucleus at a high speed are called Beta particles.

Beta particles are small, fast-moving particles that become negatively charged when atoms undergo radioactive decay. These particles are emitted by a number of unstable elements' nucleus, including strontium-90, carbon-14 and hydrogen-3 (tritium).

Beta particles, also known as beta rays or beta radiation, are high-energy, fast-moving electrons or positrons released during the radioactive decay of atomic nuclei. Beta decay occurs in two ways: - decay and + decay, which lead to the creation of electrons and positrons, respectively.

To know more about Beta particles, visit,

https://brainly.com/question/16645044

#SPJ4

The correct answer is: Bulb A will stay lit but Bulb C will turn off when Bulb D is disconnected in the circuit on the right, and both Bulb A and Bulb C will stay lit when Bulb B is disconnected in the circuit on the left.

A circuit is a complete path or loop through which an electric current can flow. It consists of different components such as a power source (such as a battery), conductive wires, and other electrical components such as resistors, capacitors, and switches.

In the circuit on the left, Bulb A and Bulb B are connected in parallel while in the circuit on the right, Bulb C and Bulb D are connected in series.

When Bulb B is disconnected from the circuit on the left, Bulb A will stay lit because it is still receiving current from the battery through the unbroken wire. Bulb C will also stay lit because it is not affected by the disconnection of Bulb B.

When Bulb D is disconnected from the circuit on the right, the circuit will be incomplete because it is in series. This means that no current will flow through the circuit, and both Bulb A and Bulb C will turn off.

To know more about capacitors, visit:

https://brainly.com/question/17176550

#SPJ1

When two resistors are connected in series, their equivalent resistance can be found using the equation: Req = R1 + R2

When two resistors are connected in series, their equivalent resistance can be found using the equation:

Req = R1 + R2

where R1, R2 are resistor values measured in ohms

This equation applies because in a series circuit, the current passing through each resistor is the same, but the voltage drop across each resistor is proportional to its resistance. The total voltage drop across the two resistors is equal to the voltage of the power source, and the sum of the voltage drops across each resistor is equal to the total voltage drop. Therefore, the sum of the resistances is equal to the equivalent resistance.

It's important to note that this equation only applies to resistors connected in series. When resistors are connected in parallel, the equivalent resistance is found using a different equation, which takes into account the inverse relationship between resistance and current.

Learn more about resistance here:

https://brainly.com/question/29427458

#SPJ4

The torque exerted by the fish about an axis perpendicular to the page and passing through the hand of the person holding the pole is approximately 6.84 N·m.

What is Torque?

It is commonly denoted by the symbol τ (tau) and is given by the product of the force .

The torque exerted by the fish about an axis perpendicular to the page and passing through the hand of the person holding the pole can be calculated using the formula:

τ = r × F × sin(θ)

where τ is the torque, r is the lever arm or the distance between the axis of rotation and the point where the force is applied, F is the force applied, and θ is the angle between the lever arm and the direction of the force.

In this case, the force applied is the force exerted by the fish on the fishing line, and the lever arm is the distance between the axis of rotation (the hand of the person holding the pole) and the point where the force is applied (the end of the fishing pole).

We can find the lever arm using trigonometry:

r = L × sin(θ)

where L is the length of the fishing pole.

Substituting the given values, we get:

r = 2.00 m × sin(20°) ≈ 0.684 m

Now we need to determine the force applied by the fish on the fishing line. This will depend on the weight of the fish and the tension in the fishing line. Without more information, we cannot calculate this force.

Assuming a force of 10 N, for example, we can calculate the torque as:

τ = 0.684 m × 10 N × sin(90°) = 6.84 N·m

Learn more about Torque from given link

https://brainly.com/question/17512177

#SPJ1

The magnitude of the net force on the truck is 2070.5 N.

Frictional force is the force that opposes motion or attempted motion between two surfaces in contact. It arises as a result of the interlocking of irregularities on the surfaces in contact, and it acts in the direction opposite to the direction of motion or attempted motion.

Frictional force can be classified into two types: static friction and kinetic friction. Static friction is the force that prevents an object from moving when a force is applied to it, while kinetic friction is the force that opposes the motion of an object that is already in motion.

The normal force is equal to the weight of the truck, which can be calculated as:

weight = mass x gravity

where gravity is approximately 9.81 m/s^2.

So the weight of the truck is:

weight = 900 kg x 9.81 m/s^2 = 8829 N

Therefore, the normal force is:

normal force = weight = 8829 N

And the frictional force is:

frictional force = 0.5 x 8829 N = 4414.5 N

Next, we can find the net force on the truck by subtracting the force of friction from the force exerted by the car:

net force = 2345 N - 4414.5 N = -2070.5 N

Note that the negative sign indicates that the net force is in the opposite direction to the force exerted by the car, which makes sense since the truck is slowing down.

Finally, we can use Newton's second law to find the acceleration of the truck:

net force = mass x acceleration

-2070.5 N = 900 kg x acceleration

acceleration = -2.3 m/s^2

Again, the negative sign indicates that the truck is slowing down.

To know more about Frictional force, visit:

https://brainly.com/question/30280752

#SPJ1

The wall, floor, and countertop outlets, as well as the outlet for refrigeration equipment, must be served by the two or more 20A, 120V small-appliance branch circuits  that serve the kitchen, dining room, and other comparable rooms.

For the supply of receptacle outlets in the kitchen, pantry, dining room, and breakfast area, a minimum of three 20-amp small appliance branch circuits must be constructed.

The kitchen and other rooms connected to it, such as pantries, breakfast rooms, and dining rooms, must have two or more 20-ampere small-appliance branch circuits for every outlet.

To know more about circuits visit:-

brainly.com/question/27206933

#SPJ1

The baseball will reach its maximum height after approximately 6.11 seconds using equations of motion where velocity is given

When a baseball is thrown straight up with an initial velocity of 60 m/s, it will eventually reach a maximum height before falling back down due to gravity. To determine how many seconds later the baseball will reach its maximum height, we need to use the equations of motion.

The equation we can use to find the time taken for the baseball to reach its maximum height is:

t = Vf / g

where t is the time taken, Vf is the final velocity (which is zero at the maximum height), and g is the acceleration due to gravity, which is approximately [tex]9.81 m/s^2[/tex].

Substituting:

t = 60 / 9.81

t ≈ 6.11 seconds

Therefore, the baseball will reach its maximum height after approximately 6.11 seconds. After this point, the baseball will begin to fall back down to the ground due to the force of gravity, with its velocity increasing at a rate of [tex]9.81 m/s^2[/tex]

Learn more about velocity here:

https://brainly.com/question/17127206

#SPJ4

95°F is equivalent to 35°C temperature. Using Formula: °C = (°F - 32) x 5/9.

A measure of something's heat or coldness is its temperature. The most often used temperature scales globally are Celsius (°C) and Fahrenheit (°F), while there are other scales as well.

To convert Fahrenheit to Celsius, you need to subtract 32 from the Fahrenheit temperature and then multiply the result by 5/9. This formula works because the freezing point of water is 32°F and 0°C, and the boiling point of water is 212°F and 100°C. So, a change of 1 degree Fahrenheit is equivalent to a change of 5/9 degree Celsius.

To convert 95 degrees Fahrenheit (°F) to Celsius (°C), you can use the formula:

°C = (°F - 32) x 5/9

Substituting 95 for °F in the formula, we get:

°C = (95 - 32) x 5/9 = 35

Therefore, 95°F is equivalent to 35°C.

To remember this formula, you can use the mnemonic: "First subtract 32, then multiply by 5/9".

Alternatively, you can use online temperature converters or smartphone apps to quickly and accurately convert between different temperature scales.

Learn more about temperature:

brainly.com/question/11464844

#SPJ4

60 kilometers per hour (Km) is equal to 37.28 miles per hour.

Use formula, km/ 1.609 to convert to mph.

Distance is the sum of an object's movements, regardless of direction. Distance can be defined and explained as the amount of space an object has covered, regardless of its starting or ending position.

The pace at which an object's position changes in any direction is referred to as its speed. The distance traveled in the relation to the time it took to travel that distance is how speed is defined. Since speed simply has a direction and no magnitude, it is a scalar quantity. You must always multiply or divide by 1.6 to determine MPH. When moving at 60 km/h, the calculation is 60/1.609344, or 37.28 mph.

Learn more about speed:

brainly.com/question/13943409

#SPJ4

A north wind blows from the north and blows towards the south. Therefore, the flag would wave towards the south.

The uneven heating of the Earth by the sun and the rotation of the Earth result in the wind, which is the movement of air. Light breezes to natural disasters like hurricanes and tornadoes are all types of winds.

Planetary, Trade, Westerly, Periodic, and Local Winds are some examples of wind types. Wind exists due to the uneven heating of the earth.

A north wind blows from the north and blows towards the south. Therefore,  the flag would wave towards the south.

Learn more about the wind, here:

https://brainly.com/question/12005342

#SPJ1