Answer:
Tetrahedral molecules are normally spy hybridized.
Explanation:
What is the freezing point, in Celsius, of a sucrose-water solution containing 2.23g sucrose per 100g water. The molal freezing point depression constant for water is 1.86oC/m.
The freezing point of the solution is - 0.12 oC.
We know that;
ΔT = K m i
ΔT = Freezing point depression
K = Freezing constant
m = molality
i = Van't Hoff factor
Number of moles of sucrose= 2.23g/342 g/mol = 0.0065 moles
Mass of solvent in Kg = 0.1 Kg
Molality of the solution = 0.0065 moles/ 0.1 Kg = 0.065 m
Now;
ΔT = 1.86 oC/m × 0.065 m × 1
ΔT = 0.12 oC
Freezing point of pure water = 0 oC
Freezing point of solution = 0 oC - 0.12 oC = - 0.12 oC
Learn more: https://brainly.com/question/2292439
how is waste removed from the body
Waste is removed from the body in various ways. Kidneys filter out metabolic waste, excess fluid and eliminate it in the form of urine. Lungs exhale CO2 from the deoxygenated blood. The undigested solid waste is egested out from the large intestine. Excretion is the process of removing wastes and excess water from the body. It is one of the major ways the body maintains homeostasis. Organs of excretion make up the excretory system. They include the kidneys, large intestine, liver, skin, and lungs.
a 13.5 g sample of zinc(zn) heated from 24.2 degrees celsius to 83.6 degrees celsius that absorbs 312j of heat? use specific heat
Explanation:
83.6-24.2= 59.4 which is the change in heat
Why we use two different methods for detection of cogulase enzyme ? Or what other reason or what basic different between them?
the process of breaking food is to release energy is called _____
Answer:
The process by which food is broken down to release energy is called respiration
I hope it helps.
Answer:
Respiration
Explanation:
hope this helps.
radium-223 decays with a half-life of 11.4 days, how long will it take for a 0.240-mol sample of radiuim to decay to 1.88 x 10-3 mol
The time taken for 0.240 mole sample of radiuim to decay to 1.88×10¯³ mole is 79.8 days
We'll begin by calculating the number of half-lives that has elapsed.
Original amount (N₀) = 0.240 mole
Amount remaining (N) = 1.88×10¯³ mole
Number of half-lives (n) =?N = 1/2ⁿ × N₀
1.88×10¯³ = 1/2ⁿ × 0.240
Cross multiply
1.88×10¯³ × 2ⁿ = 0.240
Divide both side by 1.88×10¯³
2ⁿ = 0.240 / 1.88×10¯³
2ⁿ = 128
2ⁿ = 2⁷
n = 7Thus, 7 half-lives has elapsed
Finally, we shall determine the time.Number of half-lives (n) = 7
Half-life (t½) = 11.4 days
Time (t) =?t = n × t½
t = 7 × 11.4
t = 79.8 daysTherefore, the time taken for 0.240 mole sample of radiuim to decay to 1.88×10¯³ mole is 79.8 days
Learn more: https://brainly.com/question/13266270
Which statement best describes mechanical energy?
A.the energy of heat and magnetism
B.the energy of electricity and motion
C.the energy of moving parts and motion
D.the energy of electricity and heat
Answer:
the answer is B.
Explanation:
your welcome
Answer:
the answer is B
Explanation:
i have the same exact questionn
A mixture of solids containing a ketone, a carboxylic acid, and an amine, are dissolved in DCM. What is the best way to begin an extraction to separate the amine from the mixture
There are different ways of extraction. The best way to begin an extraction to separate the amine from the mixture is to extract with dilute NaOH.
An acid-base extraction is often used in the extraction of carboxylic acids from the organic layer and thereafter into the aqueous layer.NaOH is known to be the most common compound that is used to convert a carboxylic acid into its more water-soluble ionic carboxylate form.
But if the mixture has a compound that you want, and that can react with NaOH, another milder base such as sodium bicarbonate is preferably used.
See full question below
A mixture of solids containing a ketone, a carboxylic acid, and an amine, are dissolved in DCM. What is the best way to begin an extraction in order to separate the carboxylic acid from the mixture?
A) Extract with dilute NaOH
B) Extract with dilute HCl
C) Extract with dichloromethane
D) Extract with water
Learn more from
https://brainly.com/question/2646724
5. If 10.0 gram of aluminum chloride are decomposed, how many molecules of Cl, are
produced?
Answer: 6.77*1022 Molecules
Explanation: :)
PLS HELP THIS IS TO HARD PLS
Escriba un poema usando 4 de las siguientes palabras: lluvia, nieve, lluvia, granizo, tornado, huracanes, frente cálido, frente frío, alta presión, baja presión, termómetro, barómetro, anemómetro, pluviómetro, veleta o higrómetro.
plis ayúdenme porfa
Answer:
i dont speak mexican
Explanation:
crude oil is a liquid kind of___________
what is the answer?
#let's study
please i need this now ill give you brainlest
Answer: The following information should be included;
What is the difference between the greenhouse effect, climate change and global warming?
What proof do we have that climate change is happening?
Why is it happening?
What is caused by temperature differences in the mantle resulting in plate movement?
Crust
Convection Currents
Lithosphere
Answer:
Convection Currents
Explanation:
PLEASE HELP ME!!! When two atoms combine to form a compound, one atom pulls electrons from the other atom towards itself. The atom that pulls electrons is (reduced or oxidized). The atom whose electrons are being pulled is (reduced or oxidized)?
Answer:
The pulling atom is oxidized while the pulled atom is reduced. Grade 9 Chemistry
Explanation:
Which of the following statements are true concerning product distribution in the halogenation of an alkane?
a. Halogenation of alkanes follows a chain mechanism.
b. The initiation process involves the formation of a halogen molecule.
c. Heat or UV light causes the weak halogen bond to break.
d. A radical is an intermediate with a single unpaired electron.
e. Halogenation of alkanes is a rearrangement reaction.
Halogens combine with alkanes to yield halogenoalkanes. It is a chain reaction.
Alkanes are a group of organic molecules whose functional group is the carbon - carbon single bond. The halogenation of alkanes refers to the process by which alkanes reacts with halogen molecules to yield halogenoalkanes.
The following are true statements regarding the halogenation of alkanes;
Halogenation of alkanes follows a chain mechanism.Heat or UV light causes the weak halogen bond to break.A radical is an intermediate with a single unpaired electron.Learn more: https://brainly.com/question/17638582
A radioactive sample has a half life of 1 hour. If you start with 1.000 gram of it at noon, how much of it remains at 4pm
The amount of the sample remaining at 4pm is 0.0625 g
We'll begin by calculating the number of half-lives that has elapsed
Half-life (t½) = 1 hour
Time (t) = 4 hour
Number of half-lives (n) =?n = t / t½
n = 4 / 1
n = 4Finally, we shall determine the amount the sample remaining at 4pmNumber of half-lives (n) = 4
Initial amount (N₀) = 1 g
Amount remaining (N) =?[tex]N = \frac{N_0}{ {2}^{n}} \\ \\ N = \frac{1}{ {2}^{4}} \\ \\ N = \frac{1}{16} \\ \\ N = 0.0625 \: g[/tex]
Thus, the amount remaining at 4pm is 0.0625 g
Learn more: https://brainly.com/question/25750315
In the laboratory you are asked to make a 0.282 m manganese(II) acetate solution using 315 grams of water. How many grams of manganese(II) acetate should you add
Answer:315 - 282 = 173?
Explanation:
The boiling point of a substance is tested. After 10 tests, the result is given as 37+/−3°C. Which conclusion can be drawn from this result?
A- The scientists do not need to collect more data because they have narrowed down the range of the results.
B- The scientists should not report these results until they have the exact number.
C- The actual boiling point is either 34°C or 40°C.
D- The actual boiling point is probably between 34°C and 40°C.
From the data obtained from the tests, the actual boiling point lies between 34°C and 40°C.
The boiling point of a substance is the temperature at which the pressure of the substance becomes equal to atmospheric pressure. Pure substances have a sharp boiling point while impure substances boil over a temperature range.
In this case, the boiling point of the substance after 10 tests is obtained as 37+/−3°C. This implies that the actual boiling point lies between 34°C and 40°C.
Learn more: https://brainly.com/question/8646601
Problem 07.020 - Heat transferred from cold to hot reservoir Assume that heat in the amount of 100 kJ is transferred from a cold reservoir at 600 K to a hot reservoir at 1050 K contrary to the Clausius statement of the second law. What is the total entropy change
This problem is describing a system in which 100 kJ of energy is transferred from a cold reservior at 600 K to a hot one at 1050 K. This situation is opposed to the Clausius statement of the second law of thermodynamics, because it is widely known that heat is transferred from hot to cold systems.
However, we can calculate the total entropy change by using the following formula:
[tex]\Delta S =\Delta S _{Low}+\Delta S _{High}[/tex]
Which is broken down as follows:
[tex]\Delta S =\frac{-Q}{T_{Low}} + \frac{Q}{T_{High}}\\\\\\\Delta S =Q(\frac{-1}{T_{Low}} + \frac{1}{T_{High}})[/tex]
Since the heat is assumed to be equal for the both of them. Then, we plug in the given heat and temperatures to obtain:
[tex]\Delta S =100kJ(\frac{-1}{600K} + \frac{1}{1050K})\\\\\Delta S =-0.0714\frac{kJ}{K}[/tex]
Learn more:
https://brainly.com/question/17145614https://brainly.com/question/13999732Atomic mass is an average of the elements_____.
Specific chemical element
Answer:
The atomic mass of an element is the average mass of the atoms of an element measured in atomic mass unit (amu, also known as daltons, D). The atomic mass is a weighted average of all of the isotopes of that element, in which the mass of each isotope is multiplied by the abundance of that particular isotope.
Explanation:
How many atoms are in mercury (I) phospate?
The chemical formula is (Hg2)3(PO4)2
A)11
B)14
C)15
D)16
Mercury (I) phosphate with the chemical formula (Hg2)3(PO4)2 has 16 atoms.
Number of Hg atoms = 2x3 = 6Number of P atoms = 2 x 1 = 2Number of O atoms = 4x2 = 8Sum of all the atoms = 6+2+8
= 16 atoms
More on the number of atoms in a molecule can be found here: https://brainly.com/question/19140379
Which two types of information are written in an element's box in the periodic table?
I think it is B,D
Answer:
Yes it is B,D.
Explanation:
Each box represents an element and contains its atomic number, symbol, average atomic mass, and (sometimes) name. The elements are arranged in seven horizontal rows, called periods or series, and 18 vertical columns, called groups.
2. A solution NaF is add dropwise to a solution that is .0122 M in Ba . When the concentration of F exceeds ______M, BaF2 will precipitate. Neglect volume changes. BaF2 K
Explanation:
BaF2(s) <------> Ba2+(aq) + 2F-(aq)
Ksp BaF2 = 1.0 x 10^-6.
Ksp BaF2 = [Ba2+(aq)]×[F-(aq)]^2 at equilibrium
When Qsp >Ksp, BaF2 will precipitate
Qsp = [Ba2+(aq)]×[F-(aq)]^2
[Ba2+(aq)]×[F-(aq)]^2 > 1.0 x 10^-6.
0.0122 moldm-3 × [F-(aq)]^2 > 1.0 x 10^-6
[F-(aq)]^2 > 1×10^-6 / 0.0122 mol2dm-6
[F-(aq)]^2 > 81.96 × 10^-6 mol2dm-6
[F- (aq)] > 9.05 × 10^-3 moldm-3
So F- concentration should be more than 9.05 × 10^-3 moldm-3
How can you include osmosis in animal cell
Can someone help me out with this question and explain me the answer too!!! Please
Answer:
sorry i dont know
Explanation:
A chemical reaction involves the reactants A and B, and the product C.
A+B→C
Trial 1 2 3
[A](mol/L) 0.10 0.10 0.20
[B](mol/L) 0.10 0.20 0.10
−Δ[A]Δt(molL s) 3.08×10−9 2.464×10−8 1.232×10−8
Explanation:
a+b =ab
answer
ab added all
is give answer
Kinetic energy is described as - The answers are stored energy - destroyed energy movement or created energy if you answer the question I will give you the brainiest.
1Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.
What is the answer to this question?
Answer:i think its d not sure tho
Explanation:
How many grams of sodium acetate NaCH3COO, , must be dissolved to prepare 200. mL of a 0.216 M aqueous solution of the salt? g
Answer:
Explanation:
You have to find the mass in the mole before the molarity and then in the mole.
