What is the image point of
(
−
7
,
(−7,5) after a translation right 5 units and up 4 units?

The line parallel to the line b is the line a

From the question, we have the following parameters that can be used in our computation:

The figure

Also, we have

Angle 1 = 90 degrees

The measure of angle 1 and angle 5 are congruent

This is so because they are corresponsing angles

So, we have

Angle 5 = 90 degrees

The above implies that line a and line b are parallel lines

Read more about angles at

brainly.com/question/25716982

#SPJ1

Answer:

6) am - 2a - m + 2

7) bcx - bcy + x - y

Step-by-step explanation:

6) a(m - 2) - m + 2

am - 2a - m + 2

7) bc(x - y) + x - y

bcx - bcy + x - y

Answer:

Step-by-step explanation:

To solve for x in the equation:

x - 2/5 = 1/5

We can start by isolating x on one side of the equation. We can do this by adding 2/5 to both sides:

x - 2/5 + 2/5 = 1/5 + 2/5

Simplifying, we get:

x = 3/5

Therefore, the solution is:

x = 3/5

The solution for the system of equations is Ax = b as the matrix is invertible (or non-singular) if and only if its determinant is not zero.

To solve a system of equations, we can use matrix algebra. We can write the system of equations in matrix form as follows:

Ax = b

where A is the matrix of coefficients, x is the vector of unknowns (the concentrations), and b is the vector of right-hand sides (the mass inputs).

To solve for x, we can multiply both sides by the inverse of A:

x = [tex]A^{-1}b[/tex]

where [tex]A^{-1}[/tex] is the inverse of A.

However, not all matrices have inverses. A matrix is invertible (or non-singular) if and only if its determinant is not zero. So, before we can solve for x, we need to check if A is invertible by calculating its determinant.

Learn more about the invertible matrix at

https://brainly.com/question/30754589

#SPJ4

1/8 in a decimal, divide the denominator by the numerator to get 1/8 as a decimal 1/8 is 0.125.

We divide the numerator by the denominator to convert a fraction to a decimal number. This results in a decimal value because, when dividing, we add the decimal place and then add the necessary number of zeros to finish the division.

1/8

1/2 x 1/2 x 1/2

0.5 x 0.5 x 0.5

0.125

To convert a fraction to a decimal, all you have to do is divide the numerator by the denominator. We position the number over its place value when converting a decimal to a fraction.

Just dividing the numerator by the denominator is all that is required to convert a fraction to a decimal.

Learn more about Decimals:

https://brainly.com/question/18596930

#SPJ4

The total cost of the bill and tip for Tyler is $71.46. This means that Tyler paid $58.6 for the food and drinks, and an additional $12.86 as a tip for the service.

To calculate how much the bill and tip cost Tyler, we first need to calculate the amount of the tip. We can do this by multiplying the total bill by the percentage of the tip, which is 18% or 0.18 as a decimal.

Tip amount = $71.46 x 0.18 = $12.86

Once we know the tip amount, we can add it to the total bill to find the final cost.

Bill and tip cost = $71.46 - $12.86 = $58.6

Therefore, total bill is $84.32 with tip as $12.86 and bill as $58.6

To learn more about bill click on,

https://brainly.com/question/12076523

#SPJ4

Answer: 0.75

Step-by-step explanation: .

The two different ways to find the product of 239×64 are,

(240 - 1)×64 and 239×(60 + 4).

Addition is also known as the sum, subtraction is also known as the difference, multiplication is also known as the product, and division is also known as the factor.

Given, A product of 239×64.

The first way is,

239×64.

= (240 - 1)×64.

= 15360 - 64.

= 15296.

Another way to find the product of 239×64 is,

= 239×(60 + 4).

= 14340 + 956.

= 15296.

learn more about arithmetic operations here :

https://brainly.com/question/25834626

#SPJ1

a) 30 minutes are taken to have the same amount of water.

b) Both pools have an amount of 1372.5 liters when 30 minutes have passed.

A linear function is one that produces a straight line when plotted. Generally, it is a polynomial function with a maximum degree of 1 or 0. 

Now in the given question ,

a) Physically speaking, the capacity (Q) of each pool, in liters, is equal to the product of flow rate , in liters per minute, and time (t), in minutes. Hence, we derive the following functions :

First pool,

[tex]Q_1=915+15.25t\\[/tex]           ...... (1)

Second pool,

[tex]Q_2=45.75t[/tex]                   ....... (2)

The following expression can be used to calculate how long it will take to find two pools with the same amount of water:

[tex]Q_1=Q_2[/tex]                       ........ (3)

By putting value of (1) and (2) in (3),

915 + 15.25 t = 45.75 t

30.5 t = 915

t = 915 ÷ 30.5

t = 30 minutes

30 minutes are taken to have the same amount of water.

b) By (2) and knowing that t = 30 , then we have the corresponding amount:

[tex]Q_2=45.75t\\\\Q_2=45.75*30\\\\Q_2=1372.5L[/tex]

Both pools have an amount of 1372.5 liters when 30 minutes have passed.

To learn more on linear functions, visit:

brainly.com/question/14165558

#SPJ1

C) The ordered pair that represents the initial value of the function is of (0,3840), meaning that the graph of the function crosses the y-axis at the value of y = 3840.

D) The rate of change of the equation is of -128, meaning that when x increases by one, y is decreased by 128.

The following is the definition of a linear function's slope and intercept:

y = mx + b.

In which:

m is the slope, representing the rate of change, that is, by how much y changes when x is increased by one.

The value of y at x=0 is represented by the intercept, b. Hence the ordered pair is of (0,b).

The function is defined as follows for this problem:

y = -128x + 3840.

The slope and intercept are therefore given as follow:

m = -128, b = 3840.

More can be learned about linear functions at brainly.com/question/24808124

#SPJ1

The equation of the line that's vertical to the given line and passes through the point(,6) is y = (-2/3) x28/3.

To find the equation of a line vertical to a given line, we need to use the fact that the pitches of two vertical lines are negative reciprocals of each other.

Let's start by chancing the pitch of the given line. The equation of a line in pitch- intercept form is y = mx b, where m is the pitch and b is the y- intercept. We can rewrite the given line 3x- 2y = 5 in pitch- intercept form by working for y

3x- 2y = 5

- 2y = -3 x 5

y = (3/2) x-5/2

So the pitch of the given line is3/2.

The pitch of a line vertical to this line is the negative complementary of3/2, which is-2/ 3.

Now we can use the point- pitch form of the equation of a line to find the equation of the line that passes through the point(,6) and has pitch-2/ 3. The point- pitch form is

y- y1 = m( x- x1)

where( x1, y1) is the point the line passes through and m is the pitch.

Substituting in the values we know, we get

y- 6 = (-2/3)( x- 5)

Expanding the right side, we get

y- 6 = (-2/3) x10/3

Adding 6 to both sides, we get

y = (-2/3) x28/3

So the equation of the line that's vertical to the given line and passes through the point(,6) is y = (-2/3) x28/3.

To further about vertical :

https//brainly.com/question/29268451

#SPJ1

The quadratic equation of [tex]x^{2}[/tex]-6x+9=0 is C) (x-2)(x+3).

Equation is a physical and mathematical statement that describing physical phenomena and the relationship between different physical quantity typically consist of variable simple presenting physical quantity and then it personal variable may be pointed such as your energy.

This equation is an example of a quadratic equation, which is an equation of the form a[tex]x^{2}[/tex]+bx+c=0, where a, b, and c are real numbers, and a is not equal to 0. In this equation, a is equal to 1, b is equal to -6, and c is equal to 9. To solve this equation, we need to use the quadratic formula, which states that the solutions to the equation are x= -b ± [tex]\sqrt[1]{b^{2}-4ac }[/tex] / 2a. Therefore, the solutions to this equation are x= -(-6) ± [tex]\sqrt{(-6)^{2} -(4)(1)(9) }[/tex]) / 2(1), which simplifies to x=3 ± [tex]\sqrt{3}[/tex] /2, or x=3 ± [tex]\sqrt{9}[/tex] /2. This simplifies to x=3 ± [tex]\sqrt{3}[/tex], or x=3 ± 1. Therefore, the solutions to this equation are x=2 and x=4. The factored form of this equation is (x-2)(x+3), which is option C.

To know more about equation click-

brainly.com/question/26408808

#SPJ1

Answer:

x = 88

Step-by-step explanation:

To find the value of x, we know that the sum of a quadrilateral's exterior angles are 360. We can use this information to create an algebraic expression and solve for x.

[tex]x+73+90+109=360[/tex]

Add like terms

[tex]x+272=360\\[/tex]

Subtract 272 on both sides

[tex]x=88[/tex]

To prove our work, we can add up all the angle measures and see if they add up to 360.

[tex]88+73+90+109=360[/tex]

So, our work is correct.

Answer:

55%

Step-by-step explanation:

To get 55 I just divided 33/60 and multiplied it buy 100

Answer:

required perimeter is 12.57mm

Answer:

4

Step-by-step explanation:

I think and I hope I got it right sorry if I didnt

The answer I think is right is a=24

a/6=?

24/6=4

Rounding up to the nearest whole number, the quarterback throws 3 passes in the fourth quarter to complete all of them.

Let's first find out how many passes the quarterback completed in the first three quarters:

18 passes completed out of 33 attempts in the first three quarters

= 18/33 = 0.545 (rounded to three decimal places)

We can then find the total number of passes attempted in the first three quarters by using the fact that the completion rate is the number of completions divided by the number of attempts:

0.545 = 18/x, where x is the total number of attempts in the first three quarters

Solving for x, we get:

x = 18/0.545 = 33

So the quarterback attempted 33 passes in the first three quarters.

Next, we can find the total number of passes attempted in the game by using the completion rate for the entire game:

0.625 = (18 + passes completed in the fourth quarter) / (33 + passes attempted in the fourth quarter)

Multiplying both sides by the denominator:

0.625 × (33 + passes attempted in the fourth quarter) = 18 + passes completed in the fourth quarter

20.625 + 0.625 × passes attempted in the fourth quarter = 18 + passes completed in the fourth quarter

Subtracting 18 and 0.625 × passes attempted in the fourth quarter from both sides, we get:

2.625 = passes completed in the fourth quarter - 0.625 × passes attempted in the fourth quarter

Adding 0.625 × passes attempted in the fourth quarter to both sides, we get:

passes completed in the fourth quarter = 2.625 + 0.625 × passes attempted in the fourth quarter

We don't know the exact number of passes attempted in the fourth quarter, but we can see that for every 1 pass attempted, the quarterback completes 0.625 - 0.545 = 0.08 more passes than in the first three quarters. So to complete all of his passes in the fourth quarter, he needs to attempt:

0.08 × x = 0.08 × 33 = 2.64

Question - A quarterback completes 18 of 33 passes during first three quarters of a football game. He completes every pass in the fourth quarter and 62.5% of his passes for the entire game. How many passes does the quarterback throw in fourth quarter?

Learn more about quarterback here: brainly.com/question/759084

#SPJ4

The areas of the composite figures are listed below:

In this problem we need to determine the areas of composite figures, which are the result of adding and subtracting geometric figures, whose area formulas are listed below:

Rectangle

A = b · h

Triangle

A = 0.5 · b · h

Circle

A = π · r²

Semicircle

A = 0.5π · r²

Quarter of a circle

A = 0.25π · r²

Square

A = l²

Where:

Now we proceed to determine the area of each figure:

Area 1

A = 30 · 20 - 6 · 14

A = 600 - 84

A = 516

Area 2

A = π · (8 cm)² - π · (3 cm)²

A = (64 - 9) · π cm²

A = 55π cm²

Area 3

A = (14 m)² - 4 · (5 m)²

A = 196 m² - 100 m²

A = 96 m²

Area 4

A = 0.5π · (7 m)² + 0.5 · (14 m) · (11 m)

A = 29.5π m² + 77 m²

A = (29.5π + 77) m²

Area 5

A = (7 ft) · (10 ft) + (3 ft) · (4 ft)

A = 70 ft² - 12 ft²

A = 58 ft²

Area 6

A = (28 cm)² - 4 · 0.25π · (14 cm)²

A = 784 cm² - 196π cm²

A = 588 cm²

To learn more on areas of composite figures: https://brainly.com/question/23718948

#SPJ1

The value of the expression is 1/c - 5

Note that algebraic expressions are described as expressions that are composed of terms, variables, coefficients, factors and constants.

From the information given, we have that;

c/ c² - 7c + 10 - (2/ c² - 7c + 10)

Find the lowest common factors

c - 2/  c² - 7c + 10

solve the quadratic equation

c - 2/ c² - 5c - 2c + 10

Factor the expression, we get;

c- 2/c(c - 5) - 2(c - 5)

Factor the terms

c-2/(c-2)(c-5)

Divide the values

1/c - 5

Learn about algebraic expressions at; https://brainly.com/question/4344214

#SPJ1

A left-skewed histogram is a frequency distribution in which the data is concentrated towards the right side of the histogram, with a tail stretching towards the left.

A left-skewed histogram is a kind of frequency distribution where the data is concentrated towards the right side of the histogram, with a tail extending towards the left. It is otherwise called a negatively skewed histogram or a left-tailed histogram. In a left-skewed histogram, the mean is not exactly in the middle, demonstrating that the information is slanted toward the lower end of the conveyance. This can happen when the information has a lower bound or a base worth, which makes the tail of the dispersion be pulled towards the left. Left-skewed histograms can be helpful in examining information that has a characteristic lower cutoff or floor, for example, response times, reaction rates, or pay levels.

Learn more about histograms:

https://brainly.com/question/30664111

#SPJ4

1) Jay buys a house for $40,000 less than he is willing to pay. He bought a house from a seller who received $2,000 more than he was willing to sell.

4) Kevin wanted to spend $50 on a dishwasher and bought it for $45 from a manufacturer hoping to get $40.

Economic Surplus:

Economic surplus, also known in mainstream economics as general welfare or general public welfare or Marshall's surplus (after Alfred Marshall), is one of two related quantities. Pay.

Producer surplus or producer surplus is the amount a producer receives by selling at a market price higher than the lowest price they are willing to sell. This roughly equals profit margin (because producers are usually unwilling to sell at a loss and are generally uninterested in selling at a break-even price).

Total economic surplus = supplier surplus + consumer surplus

On scenario 1, total economic surplus = $40,000 + $2,000 = $42,000

On scenario 2, total economic surplus = $2.25 + $3 = $5.25

On scenario 3, total economic surplus = $0

On scenario 4, total economic surplus = $5 + $5 = $10

Complete Question:

Select the two situations with the highest total surplus. correct answer(s) jay buys a house for $40,000 less than he was willing to pay. he bought his home from sellers who received $2,000 more than they were willing to sell for. bonnie buys flowers for $2.25 less than she was willing to pay. she bought them from a seller would have been willing to receive $3 less from the sale. don wanted to buy a scooter for no more than $5, but was only able to find a producer who would sell for $15. kevin wanted to spend $50 on a dishwasher and bought one at $45 from a producer who was hoping to receive $40.

Learn more about Spend:

https://brainly.com/question/23283044

#SPJ4

The area of the carpet is [tex]2 7/20[/tex] square meters.

The size of a patch on a surface is determined by its area. Surface area refers to the area of an open surface or the boundary of a three-dimensional object, whereas the area of a plane region or plane area refers to the area of a form or planar lamina.

To find the area of the carpet, we need to multiply its length by its width.

The mixed numbers must first be transformed into improper fractions:

Length: 21/4 = 9/4

Width: 11/5 = 6/5

Then we can multiply:

Area = length x width

Area = (9/4) x (6/5)

Area = 54/20 or 27/20 square meters

Therefore, the area of the carpet is 27/20 square meters.

for such more question on area

https://brainly.com/question/25092270

#SPJ4

Answer:

-4

Step-by-step explanation:

7(-1)³ + 5(-1)² -2 = ?

-7 + 5 -2 = ?

-2 -2 = ?

? = -4

The number of pretzels in the beginning was 44 pretzels solving the equation.

An equation is a mathematical statement containing two expressions on either sides which are connected with an equal to sign.

Either sides of an equation is called as left hand side and right hand side.

Let the total number of pretzels = x

Pretzels has been spilled and lost half of the pretzels.

Remaining pretzels = x - x/2

Jane ate 14 pretzels.

Remaining pretzels = x - x/2 - 14

Her sister then ate one more than half the remaining pretzels.

Remaining pretzels = x - x/2 - 14 - [1/2 (x - x/2 - 14) + 1]

Remaining pretzels is 3.

So we get an equation,

x - x/2 - 14 - [1/2 (x - x/2 - 14) + 1] = 3

Solve for x.

x - x/2 - 14 - (x/2 - x/4 - 7 + 1) = 3

x - x/2 - x/2 + x/4 - 14 + 7 - 1 = 3

x/4 - 7 - 1 = 3

x/4 - 8 = 3

x/4 = 11

x = 44

Hence the total number of pretzels was 44.

Learn more about Solving Equations here :

https://brainly.com/question/18067015

#SPJ9

Your question is incomplete. The complete question is as follows.

On a car trip, Jane ate some pretzels. After spilling and losing half of the pretzels, she ate 14. Her sister then ate one more than half the remaining pretzels, after which there was 3 pretzels.

How many pretzels was there?

Answer:

Octagon.

Octa comes from the Greek word "okto", which means eight.

The length of arc CYT is solved to get

= 40.12

Length of arc CYT is calculated using the formula for length of arc

= theta / 360 * 2πR

From the problem, we have that

theta = 360 - 128 = 230

R = radius = CA = 10

π = 3.14sds

plugging in the values we have

= 230 / 360 * 2 * 3.14 * 10

= 23/36 * 20 * 3.14

= 40.1222

= 40.12 (to the nearest tenth)

Learn more about Length of arc at:

https://brainly.com/question/8020286

#SPJ1

250 grams is approximately equal to 0.5511 pounds  ( rounded to four decimal places )

The conversion factor to convert grams to pounds is 0.00220462

1 gram = 0.00220462 pounds

The conversion is the process of changing the unit of one quantity to another units  

The conversion factor is defined as the number that is used to change one unit to another units by multiplying or dividing

The mass in pounds = The mass in grams × conversion factor

Substitute the values in the equation

1 gram = 0.00220462 pounds

250 grams =  250 × 0.00220462

Multiply the numbers

= 0.5511 pounds  ( rounded to four decimal places )

Therefore, 250 grams is 0.5511 pounds

Learn more about conversion factor here

brainly.com/question/23718955

#SPJ4