When elemental sodium metal (Na) is mixed with ethanol (CH3CH2OH), an exothermic reaction proceeds to give sodium ethoxide (CH3CH2O–/Na) and hydrogen gas (H2).
The balanced chemical equation for the reaction of sodium with ethanol is:2 Na(s) + 2 CH3CH2OH(l) → 2 CH3CH2O–Na+ + H2(g)When sodium metal is mixed with ethanol, the reaction occurs in two steps. In the first step, the electrons of sodium metal are transferred to the ethanol molecules, resulting in the formation of positively charged sodium ions (Na+) and negatively charged ethoxide ions (CH3CH2O–):Na(s) + CH3CH2OH(l) → Na+(aq) + CH3CH2O–(aq) + 1/2 H2(g).
In the second step, the ethoxide ions react with the remaining sodium metal to form sodium ethoxide, while hydrogen gas is produced as a byproduct: Na(s) + CH3CH2O–(aq) → CH3CH2O–Na+(aq) + 1/2 H2(g)Thus, the exothermic reaction between sodium metal and ethanol gives sodium ethoxide (CH3CH2O–Na+) and hydrogen gas (H2).
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11
Given the reaction: Cu(s) + 2Ag+(aq) → Cu2+(aq) + 2Ag(s)
Which statement correctly indicates the change that occurs?
1. One mole of Cu(s) loses a total of 2 moles of electrons.
2. One mole of Cu(s) gains a total of 1 mole of electrons.
3. Two moles of Ag+(aq) loses a total of 2 moles of electrons.
4. Two moles of Ag+(aq) gains a total of 1 mole of electrons.
Answer: one mole of cu(s) loses total of 2 moles of electrons
Explanation:
which functional group can give a false positive for the jones test A. Aldehyde
B.Ketone
C.3° alchohol
D.Phenols
The functional group that can give a false positive for the Jones test is aldehyde. The Jones test is a qualitative test for the presence of aldehydes and other reducing sugars. option A, i.e. Aldehyde is the correct answer.
The test solution is prepared by dissolving chromic anhydride in sulfuric acid. The Jones oxidation is a simple technique used to identify primary and secondary alcohols. In the presence of a primary or secondary alcohol, the Jones reagent will oxidize the alcohol to a carboxylic acid or ketone.
In the presence of an aldehyde, the Jones reagent will oxidize the aldehyde to a carboxylic acid. This can lead to a false positive result in the Jones test for aldehydes. Hence, option A, i.e. Aldehyde is the correct answer.
To know more about aldehydes refer to:
https://brainly.com/question/17101347
#SPJ11
When a 12.8 g sample of NaOH(s) dissolves in 361.0 mL water in a coffee cup calorimeter, the temperature of the water changes from 21.6°C to 30.7°C. NaOH(s) + Na+ (aq) + OH- (aq) Assuming that the specific heat capacity of the solution is the same as for water (4.184 J/g. °C) and the density of the solution is 1.032 g/mL, calculate the following. (
a) the heat transfer from system to surroundings (in J) b) AH for the reaction (in kJ)
a) The heat transfer from the system to surroundings is 18.27 kJ
b) The enthalpy change of the reaction is +57.1 kJ/mol.
A solid sample of NaOH weighing 12.8 g was dissolved in 361.0 mL of water within a coffee cup calorimeter, resulting in a temperature rise of the water from 21.6°C to 30.7°C.
NaOH(s) + Na+ (aq) + OH- (aq)
Assuming that the specific heat capacity of the solution is the same as for water (4.184 J/g. °C) and the density of the solution is 1.032 g/mL, the heat transfer from the system to surroundings and the enthalpy change of the reaction (ΔHrxn) can be calculated.
a) The heat transfer (q) from the system to surroundings can be calculated using the equation:
q = m × c × ΔT
where m is the mass of the solution, c is the specific heat capacity, and ΔT is the temperature change.Using the given values, we can write:
q = (12.8 g + 361.0 g) × 4.184 J/g. °C × (30.7°C - 21.6°C)q = 18268.3 J ≈ 18.27 kJ
Therefore, the heat transfer from the system to surroundings is 18.27 kJ.
b) The enthalpy change of the reaction (ΔHrxn) can be calculated using the equation:
ΔHrxn = -q / n
where n is the number of moles of the substance that undergoes the reaction.In this case, 12.8 g of NaOH(s) dissolves in water. Considering that the molar mass of NaOH is 40 g/mol, we can determine the quantity of moles present in NaOH.
n = 12.8 g / 40 g/mol = 0.32 mol
Using the heat transfer value calculated above, we can write:
ΔHrxn = -(-18.27 kJ) / 0.32 mol
ΔHrxn = +57.1 kJ/mol
Therefore, the enthalpy change of the reaction is +57.1 kJ/mol.
Learn more about enthalpy change at: https://brainly.com/question/16387742
#SPJ11
beginning with 1.31 g salicylic acid, 4.0 ml acetic anhydride, calculate the theoretical yield of acetylsalicylic acid.
The theoretical yield of acetylsalicylic acid is 1.71 g.
The theoretical yield of acetylsalicylic acid is determined by calculating the amount of acetylsalicylic acid that could be produced under perfect conditions. The chemical reaction for this transformation is shown below;
[tex]C_7H_6O_3 + C_4H_6O_3[/tex]-> [tex]C_9H_8O_4 + C_2H_4O_2[/tex]
1.31 g of salicylic acid is equivalent to; (1.31/138) moles = 0.0095 moles
4 ml of acetic anhydride is equivalent to;(1.08 g/cm3) x (4 ml) / (102.09 g/mole) = 0.0164 moles
The amount of acetylsalicylic acid that would be produced is given by the amount of salicylic acid that reacts completely. Since one mole of salicylic acid produces one mole of acetylsalicylic acid, the amount of acetylsalicylic acid produced is equal to the moles of salicylic acid used.
Moles of acetylsalicylic acid = 0.0095 moles.
The molecular weight of acetylsalicylic acid is 180.157 g/mole.
Mass of acetylsalicylic acid = (0.0095 moles) x (180.157 g/mole) = 1.71 g.
Hence, The theoretical yield of acetylsalicylic acid is 1.71 g.
To know more about acetylsalicylic acid refer here :
https://brainly.com/question/2070753
#SPJ11
Light frequent watering practices suppress any chinch bug infestations.
True. False
The statement that light frequent watering practices suppress any chinch bug infestations is false.
Chinch insect infestations are not controlled by sparse, infrequent watering practises.
Chinch bugs are common pests that eat grass, and irrigation practises usually have no effect on their existence.
It is not a direct technique of control, but keeping a healthy grass through adequate watering and upkeep can assist to lower the chance of chinch bug infestations indirectly.
It is vital to apply targeted techniques, such as insecticides created exclusively to get rid of chinch bugs.
Chinch insect infestations can also be avoided by routinely inspecting the lawn, using the right mowing techniques, and removing thatch accumulation.
To learn more about insecticides, visit:
https://brainly.com/question/28020025
#SPJ11
For each of the following strong base solutions, determine [OH−][OH−] and [H3O+][H3O+] and pHpH and pOHpOH.
For 5.2×10−45.2×10−4 MM Ca(OH)2Ca(OH)2, determine [OH−][OH−] and [H3O+][H3O+].
Calculating reaction [OH-][OH-]:[Ca(OH)2] = 5.2 × 10−4 M No. Therefore, [OH-][OH-] = 1.04 × 10−3 M.
OH- ions from one molecule of Ca(OH)2 = 2Moles of OH- ions from [Ca(OH)2] = 2 × [Ca(OH)2] = 2 × 5.2 × 10−4M = 1.04 × 10−3 M Therefore, [OH-][OH-] = 1.04 × 10−3 M. Calculating [H3O+][H3O+]:As we know that water is neutral and the product of [H3O+] and [OH-] is equal to 10^-14[H3O+][OH−] = 1.0 × 10−14 pOH = −log[OH−][OH−] = antilog (−pOH)pH = 14.00 − pOHpOH = −log[OH−][OH−].
Substituting values, we get:[OH-][OH-] = 1.04 × 10−3 M[H3O+] = 1.0 × 10−14/[OH-] = 1.0 × 10^-14/1.04 × 10−3 = 9.615 × 10^-12 M(pH) = 14.00 - pOH = 14.00 - 11.02 = 2.98(pOH) = -log[OH−][OH−] = -log(1.04 × 10^-3) = 2.98Therefore, the values of [OH-], [H3O+], pH, and pOH are 1.04 × 10^-3 M, 9.615 × 10^-12 M, 2.98 and 11.02 respectively.
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11
which sample has the largest mass? ,e'9'c c,o~ (a) i mole of marshmallows (c) 1 mole of c02 (carbon dioxide) molecules (b) i mole of pb (lead) atoms (d) all of these have the same mass.
Among the given options (b) 1 mole of Pb (lead) atoms has the largest mass.
To determine which sample has the largest mass, we need to compare the molar masses of each substance. The molar mass is the mass of one mole of a substance, expressed in grams.
(a) 1 mole of marshmallows: Marshmallows are composed of various compounds, so we cannot determine their exact molar mass without knowing their composition.
(b) 1 mole of Pb (lead) atoms: The molar mass of lead (Pb) is approximately 207.2 g/mol.
(c) 1 mole of CO₂ (carbon dioxide) molecules: The molar mass of carbon dioxide (CO₂) is approximately 44.01 g/mol.
Comparing the molar masses, we see that (b) 1 mole of Pb atoms has the largest molar mass (207.2 g/mol), followed by (c) 1 mole of CO₂ molecules (44.01 g/mol).
Therefore, the correct option is b.
Learn more about molar mass at https://brainly.com/question/837939
#SPJ11
Identify a substance which can reduce Br (1) to Br- (aq) but cannot reduce 1,(s) to I-(aq). O Ag(s) O Cl(aq) O Pb(s) O 92-(aq)
Cl(aq) can reduce Br(1) to Br-(aq) but cannot reduce 1(s) to I-(aq). Therefore, Cl(aq) is the substance that can reduce Br(1) to Br-(aq) but cannot reduce I(s) to I-(aq).
An oxidation-reduction reaction, also known as a redox reaction, is a type of chemical reaction in which one or more electrons are transferred from one molecule or atom to another. Oxidation is a process in which an atom or molecule loses one or more electrons, whereas reduction is a process in which an atom or molecule gains one or more electrons.In the given options, Cl(aq) is the substance that can reduce Br(1) to Br-(aq) but cannot reduce I(s) to I-(aq). Chlorine gas (Cl2) is commonly utilized to treat water supplies to eliminate bacteria and other contaminants.
It is a powerful oxidizing agent that can react with water to form hypochlorite ions (ClO-), chlorite ions (ClO2-), chlorate ions (ClO3-), and perchlorate ions (ClO4-) depending on the conditions. Chlorine gas can easily oxidize Br- to Br2, which is a powerful oxidant in its own right, in the presence of water. However, it is unable to oxidize I- to I2, which is why Cl(aq) can reduce Br(1) to Br-(aq) but cannot reduce I(s) to I-(aq).
To know more about substance visit:
https://brainly.com/question/3094878
#SPJ11
according to the ideal gas law, what happens to the volume of a gas when the pressure doubles (all else held constant)? apex
Pressure and volume are proportional in direct variation, with the temperature and the number of gas molecules constant.
According to the Ideal Gas Law, what happens to the volume of a gas when the pressure doubles (all else held constant)
If the pressure of a gas is doubled (all other variables being constant), the volume of the gas will be halved. The formula for the Ideal Gas Law is PV = nRT,
where P = pressure, V = volume,
n = number of moles of gas,
R = the universal gas constant, and T = temperature.
The law states that the product of pressure and volume is proportional to the absolute temperature of the gas when all other variables are constant.
In a fixed container with a fixed number of molecules, doubling the pressure reduces the volume by half. The relationship between pressure and volume is a positive linear one. Pressure and volume are proportional in direct variation, with the temperature and the number of gas molecules constant.
To know more about ideal gas law, visit:
https://brainly.com/question/12624936
#SPJ11
explain what will happen to the ksp if not all the salt dissolves in the solution preparation.
The Ksp, or solubility product constant, is defined as the product of the concentrations of the ions of a sparingly soluble salt raised to the power of their stoichiometric coefficients. If not all of the salt dissolves during solution preparation, the Ksp will be affected.
The solubility product constant (Ksp) is a constant that quantifies the solubility of an ionic compound. The main answer to the question is that the Ksp will remain the same, regardless of the amount of salt that dissolves in the solution preparation. the concentration of the ions will be different, depending on how much of the salt dissolved. The long answer is that the Ksp formula, which is given as [Aⁿ⁺]m[Bⁿ⁻]n, assumes that all of the salt is dissolved, or at least has the potential to dissolve in the solution. The solubility of the salt is directly proportional to the concentration of the ions in the solution.
Therefore, if not all of the salt dissolves in the solution preparation, the concentration of the ions will be lower than the expected value based on the Ksp formula. that the Ksp is a constant that remains unchanged, regardless of whether all of the salt dissolves in the solution preparation or not. The reason is that the Ksp is a property of the salt and is related to its solubility, not its dissolution rate. if the solubility is affected, then the concentration of the ions in the solution will also be affected. Therefore, the Ksp formula may need to be modified based on the actual concentration of the ions in the solution.
To know more about solution Visit;
https://brainly.com/question/14985293
#SPJ11
balance the following redox reaction if it occurs in acidic solution. what are the coefficients in front of h⁺ and fe in the balanced reaction? fe (aq) mno (aq) → fe (aq) mn (aq)
The balanced redox reaction in acidic solution is : Fe2+(aq) + MnO4-(aq) → Fe3+(aq) + Mn2+(aq). The coefficients in front of H and Fe^(3+) in the balanced reaction are 8 and 1, respectively.
Fe2+(aq) + 8H+(aq) + MnO4-(aq) → Fe3+(aq) + Mn2+(aq) + 4H2O(l).
To balance the redox reaction, we follow these steps:
Assigning oxidation numbers to all elements. Fe starts with an oxidation number of +2 and ends with +3, while Mn starts with +7 and ends with +2. Writing two half-reactions, one for the oxidation process and one for the reduction process.Oxidation half-reaction: Fe2+(aq) → Fe3+(aq)Reduction half-reaction: MnO4-(aq) → Mn2+(aq)Balancing the atoms except for H and O in each half-reaction. In the reduction half-reaction, there is only one Mn atom on both sides. In the oxidation half-reaction, there is only one Fe atom on both sides.Balancing the oxygen atoms by adding H2O molecules. In the reduction half-reaction, we need 4 H2O molecules on the product side to balance the oxygen atoms. In the oxidation half-reaction, there are no oxygen atoms to balance.Balancing the hydrogen atoms by adding H+ ions. In the reduction half-reaction, we need 8 H+ ions on the product side to balance the hydrogen atoms. In the oxidation half-reaction, there are no hydrogen atoms to balance.Balancing the charges by adding electrons (e^-). In the reduction half-reaction, we need 5 electrons on the product side to balance the charges. In the oxidation half-reaction, we don't need any electrons. Multiplying each half-reaction by an appropriate factor to make the number of electrons equal in both half-reactions. In this case, we multiply the oxidation half-reaction by 5 and the reduction half-reaction by 1.Adding the two half-reactions together, canceling out the electrons.The coefficients in front of H and Fe3+ in the balanced reaction are 8 and 1, respectively.
To know more about redox reaction, refer to the link:
https://brainly.com/question/13293425#
#SPJ11
True / False when a substance melts, all of the intermolecular forces are disrupted
The given statement, "When a substance melts, all of the intermolecular forces are disrupted" is false because when a substance melts, the intermolecular forces between the particles (molecules or atoms) are weakened or overcome, allowing the substance to transition from a solid to a liquid state. However, not all intermolecular forces are completely disrupted during melting.
In the case of substances held together by ionic bonds, such as sodium chloride (NaCl), the ionic bonds are disrupted during melting, leading to the formation of freely moving ions in the liquid state. However, other intermolecular forces such as dipole-dipole interactions or London dispersion forces may still be present and contribute to the properties of the liquid.
In substances held together by covalent bonds, such as water (H₂O), melting involves weakening the hydrogen bonds between water molecules. While the hydrogen bonds are disrupted, the covalent bonds within the water molecules remain intact.
Therefore, while the intermolecular forces are weakened or changed during melting, it is not accurate to say that all intermolecular forces are completely disrupted.
Learn more about intermolecular forces at https://brainly.com/question/12243368
#SPJ11
Without doing any calculations, determine the sign of ?Ssys for each chemical reaction.
a. Mg(s) + Cl2(g) ? MgCl2(s)
b. 2 H2S(g) + 3 O2(g) ? 2 H2O(g) + 2 SO2(g)
c. 2 O3(g) ? 3 O2(g)
d. HCl(g) + NH3(g) ? NH4Cl(s)
Thermodynamics is the study of energy transformations that occur in matter. The first law of thermodynamics states that energy is conserved, while the second law of thermodynamics states that entropy of a closed system can only increase or remain the same and can never decrease.
What is the sign of ∆S sys for each chemical reaction without doing any calculations? The sign of ∆S sys can be determined using the entropy of the reactants and products. Here's how to figure out the sign of ∆S sys without doing any calculations for each reaction: A. Mg(s) + Cl2(g) → MgCl2(s)In this reaction, a solid metal reacts with a gas to form a solid product. The disorder decreases since solids are less disorderly than gases. Thus, ΔSsys is negative.B. 2H2S(g) + 3O2(g) → 2H2O(g) + 2SO2(g)In this reaction, two gases react with three gases to form two gases and one liquid. The disorder decreases since gases are more disorderly than liquids, and there are fewer particles.
Thus, ΔSsys is negative. C. 2O3(g) → 3O2(g)In this reaction, two gases react to form three gases. The disorder increases since there are more particles. Thus, ΔSsys is positive. D. HCl(g) + NH3(g) → NH4Cl(s)In this reaction, two gases react to form a solid product. The disorder decreases since gases are more disorderly than solids. Thus, ΔSsys is negative. The answer is as follows: a. ΔSsys is negative. b. ΔSsys is negative. c. ΔSsys is positive. d. ΔSsys is negative.
To know more about Thermodynamics refer to:
https://brainly.com/question/30822943
#SPJ11
How many types of ions must be present in solution, at minimum observed? the phenomenon of selective precipitation - Your answer should be whole number without any decimnal places.
Provide your answer below:
In order to observe the phenomenon of selective precipitation, a minimum of two different types of ions must be present in a solution.
What is selective precipitation?
The separation of one ion from a solution containing ions is known as selective precipitation. The most important component of selective precipitation is that it is very selective, meaning that only the ion you want to isolate is precipitated.To have a clear understanding of the concept of selective precipitation, consider the following example:
Let us consider that we have two different types of ions (A+ and B-) in solution. When a reagent such as silver nitrate is added to the solution, both types of ions may form precipitates with the silver ion.However, the solution will contain only one precipitate because silver nitrate is very selective in nature and will only precipitate one of the ions. This phenomenon occurs due to the differences in solubilities between the two precipitates.Learn more about the selective precipitation:
brainly.com/question/29807060
#SPJ11
why are line emission spectra of elements called atomic fingerprints
The line emission spectra of elements are called atomic fingerprints because they are unique for each element and can be used to identify that element. The spectra are created when an electron in an atom is excited to a higher energy level and then returns to its original energy level, releasing a photon of light in the process.
Since each element has a unique arrangement of electrons in its atoms, the energy levels and resulting photons of light are unique to that element. This is similar to how fingerprints are unique to each individual and can be used to identify them. Just like a fingerprint can reveal a person's identity, the line emission spectra can reveal the identity of an element. Therefore, they are often called atomic fingerprints.
Line emission spectra is the light spectra emitted by an element in response to absorbing energy and returning to a lower energy level. Each element has a unique number of protons, which influences the atom's electron configuration and, as a result, its line emission spectra. In this sense, the spectra of each element may be considered to be a "fingerprint" that identifies it.
The emission spectra of elements, such as those used in spectroscopy, are used for a variety of purposes, including chemical analysis, quality control, and drug discovery. Spectroscopy is also used in physics, geology, and even art restoration.The spectrum is created as an electron in the atom's outer shell absorbs energy and rises to a higher energy level. It will immediately return to its original energy level, releasing energy in the form of a photon of light. The frequency of the emitted photons is determined by the difference between the two energy levels.
As a result, each element has its own unique energy level arrangement, resulting in a unique line emission spectra.
To know more about atomic fingerprints visit:
https://brainly.com/question/23559494
#SPJ11
Calculate the percent error if a thermometer reads 76.25 °C, and a reference thermometer reads 74.96 °C. b. The heat of neutralization in an experiment was determined to be -58.7 kJ/mol. The literature value for this heat of neutralization is –56.2 kJ/mol. Calculate the percent error.
The percent error for the thermometer reading is approximately 1.72%. For the heat of neutralization, the percent error is approximately 4.46%.
The percent error is calculated using the formula:
[tex]\[\text{{Percent Error}} = \left|\frac{{\text{{Experimental Value}} - \text{{Accepted Value}}}}{{\text{{Accepted Value}}}}\right| \times 100\%\][/tex]
For the thermometer reading, the experimental value is 76.25 °C and the accepted value is 74.96 °C. Plugging these values into the formula, we get:
[tex]\[\text{{Percent Error}} = \left|\frac{{76.25 - 74.96}}{{74.96}}\right| \times 100\% \approx 1.72\%\][/tex]
For the heat of neutralization, the experimental value is -58.7 kJ/mol and the accepted value is -56.2 kJ/mol. Plugging these values into the formula, we get:
[tex]\[\text{{Percent Error}} = \left|\frac{{-58.7 - (-56.2)}}{{-56.2}}\right| \times 100\% \approx 4.46\%\][/tex]
The percent error provides a measure of the deviation between the experimental and accepted values, expressed as a percentage. In both cases, a positive percent error indicates that the experimental value is higher than the accepted value, while a negative percent error indicates that the experimental value is lower. The percent error allows for comparison and evaluation of the accuracy of measurements or experimental results.
To learn more about neutralization refer:
https://brainly.com/question/23008798
#SPJ11
Write electron configurations for each of the following elements. Use the symbol of the previous noble gas in brackets to represent the core electrons.
1. Ga
2. As
3. Rb
4. Sn
The electron configuration for each of the following elements is provided below along with the symbol of the previous noble gas in brackets to represent the core electrons.1.
The electron configuration of an atom represents the distribution of electrons within the atom's atomic orbitals. Each electron shell is filled with electrons, beginning with the innermost shell, which is closest to the nucleus, and progressing outward. The symbol of the previous noble gas in brackets represents the core electrons.
The electron configuration of Ga, which has atomic number 31, is as follows: 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p¹ (Ar)The electron configuration of As, which has atomic number 33, is as follows: 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p³ (Ar)The electron configuration of Rb, which has atomic number 37, is as follows: 1s²2s²2p⁶3s²3p⁶4s¹ (Kr)The electron configuration of Sn, which has atomic number 50, is as follows: 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p² (Kr)
To know more about electron configuration visit:
https://brainly.com/question/29157546
#SPJ11
You are able to see non-luminous objects because light has undergone. A. diffuse reflection. B. refraction. C. constructive interference.
We are able to see non-luminous objects due to diffuse reflection. The correct option is (A) diffuse reflection.
Diffuse reflection Diffuse reflection is a phenomenon in which a beam of light falls on a rough or porous surface and reflects in many different directions rather than in a fixed direction. Diffuse reflection is why we can see non-luminous objects such as books, chairs, or tables.
These objects do not emit light of their own but instead reflect the light falling on them from various sources, such as the sun or a lamp. This phenomenon helps the light to scatter over a larger area and reduce its intensity. So, the light undergoes diffuse reflection, which helps us to see non-luminous objects. Hence, option A is correct.
To know more about diffuse reflection refer to:
https://brainly.com/question/30720884
#SPJ11
what is the electron-pair geometry for b in bf3? fill in the blank bb73bafb8f9401e_1
The electron-pair geometry for boron (B) in BF3 is trigonal planar. Boron joins three fluorine atoms in BF3 to form three sigma bonds. The electron-pair geometry is the same as the trigonal planar molecular geometry since boron has no lone pairs of electrons.
According to trigonal planar geometry, the three bonding pairs of electrons are positioned around the main boron atom in a flat, triangular pattern. A trigonal planar electron-pair geometry is created in this instance when the center boron atom is surrounded by three bonding pairs of electrons.
To know more about boron:
https://brainly.com/question/31235857
#SPJ4
list the substances whose solubility decreases as temperature increases
The substances whose solubility decreases as temperature increases are Gases, Alkali metal Salts and Most organic compounds.
Gasses : For gas, solubility decreases with increasing temperature. This is due to the fact that, as temperature rises, gas particles gain kinetic energy and become more mobile. The more mobile they are, the easier they can escape from the solvent's surface, causing solubility to decrease. Some examples of gases are carbon dioxide and oxygen.
Alkali metal salts: Salts of alkali metals are also known to have decreased solubility as temperature rises. This occurs because the hydration energy released when the ions are dissolved in water is less than the lattice energy that must be expended to break up the crystal into individual ions. As a result, heat is necessary to dissolve the ions. For example, sodium chloride and potassium iodide.
Most organic compounds: Most organic compounds, such as hydrocarbons and alcohols, have lower solubility in water at higher temperatures. This is most likely because these molecules have weaker intermolecular interactions than water molecules, and as temperature rises, these intermolecular interactions weaken even more. For example, ethyl alcohol and oil are less soluble in water at higher temperatures.
To know more about solubility visit:
https://brainly.com/question/31493083
#SPJ11
Of the reactions below, which one is not a combination reaction? A) 2Mg + O2 -->2MgO B) 2CH4 + 4O2-->2CO2+ 4H2O C+O2-->CO2 D) CaO +H2O --> Ca(OH)2 E) 2N2 + 3H2-->2NH3
Among the given reactions, option C) C + O₂ --> CO₂ is not a combination reaction. A combination reaction is a type of chemical reaction where two or more reactants combine to form a single product. In this case, option C does not involve the combination of multiple reactants to form a single product.
Option A) 2Mg + O₂ --> 2MgO is a combination reaction as magnesium (Mg) and oxygen (O₂) react to form magnesium oxide (MgO).
Option B) 2CH₄ + 4O₂ --> 2CO₂ + 4H₂O is also a combination reaction where methane (CH₄) and oxygen (O₂) combine to form carbon dioxide (CO₂) and water (H₂O).
Option D) CaO + H₂O --> Ca(OH)₂ is a combination reaction as calcium oxide (CaO) reacts with water (H₂O) to produce calcium hydroxide (Ca(OH)₂).
Option E) 2N₂ + 3H₂ --> 2NH₃ is a combination reaction where nitrogen gas (N₂) and hydrogen gas (H₂) combine to form ammonia (NH₃).
Therefore, option C) C + O₂ --> CO₂ is not a combination reaction.
To know more about the combination reaction refer here :
https://brainly.com/question/17258460#
#SPJ11
what is undergoing reduction in the redox reaction represented by the following cell notation? mn(s) | mn 2 (aq) || h (aq) | h2(g) | pt
The substance undergoing reduction in the redox reaction represented by the given cell notation is hydrogen.
Redox reactions refer to reactions that involve the transfer of electrons from one substance to another. This occurs between two species, one of which undergoes oxidation, and the other undergoes reduction. The species that undergoes oxidation loses electrons while the species that undergoes reduction gains electrons.
In the given cell notation, the half-reactions are as follows:mn2+(aq) + 2e- → mn(s)E0 = -1.18 V2H+(aq) + 2e- → H2(g)E0 = 0 VFrom these half-reactions, we can conclude that Mn2+ is undergoing reduction while H+ is undergoing oxidation. Therefore, the substance undergoing reduction in the redox reaction represented by the given cell notation is hydrogen.
To know more about redox reaction visit:
https://brainly.com/question/28300253
#SPJ11
which of the following is the correct name for Cr2O3 is
O a. chromium(II) oxide
O b. chromium(III) oxide
O c. chromium(VI) oxide
O d. dichromium trioxide.
The name for Cr[tex]_2[/tex]O[tex]_3[/tex] is chromium(III) oxide. The correct answer is option b.
Chromium(III) oxide, also known as chromic oxide, is a green powder with the formula Cr[tex]_2[/tex]O[tex]_3[/tex]. Chromic oxide has a slightly complex crystal structure and is usually hydrated. The compound chromium(III) oxide (Cr[tex]_2[/tex]O[tex]_3[/tex]) is a green powder that is used as a pigment and metal polish.
In Cr[tex]_2[/tex]O[tex]_3[/tex], chromium (Cr) has a charge of +3, as indicated by the Roman numeral III in the name. Oxygen (O) has a charge of -2.
The prefix "di-" in the name "dichromium trioxide" indicates that there are two chromium atoms present in the compound. The term "tri-" indicates that there are three oxygen atoms present. Finally, "oxide" is added to indicate the presence of oxygen.
Therefore, the correct answer is option b. chromium(III) oxide.
Learn more about chromium(III) here:
https://brainly.com/question/20984455
#SPJ11
Which of the following molecules would have linear molecular geometry?
1. H2O
2. SO2
3. All of the molecules listed
4. None of the molecules listed
5. HCN
Among the given options, the molecule with a linear molecular geometry is HCN. Therefore, the correct option is 5.HCN.
The molecular geometry of a molecule is determined by the arrangement of its atoms in three-dimensional space. A molecule with a linear molecular geometry will have all its atoms in a straight line.
Now let's analyze each option:
1. H₂O: This molecule has a bent or V-shaped molecular geometry due to the presence of two lone pairs of electrons on the central oxygen atom. It is not linear.
2. SO₂: This molecule has a bent or V-shaped molecular geometry. The sulfur atom is surrounded by two oxygen atoms, and it also has one lone pair of electrons. It is not linear.
3. All of the molecules listed: This option suggests that all the molecules listed would have a linear molecular geometry. However, we have already determined that H₂O and SO₂ do not have a linear geometry, so this option is incorrect.
4. None of the molecules listed: This option suggests that none of the molecules listed would have a linear molecular geometry. Since H₂O and SO₂ do not have linear geometry, this option is correct.
5. HCN: This molecule has a linear molecular geometry. It consists of a carbon atom bonded to a hydrogen atom and a nitrogen atom, with a triple bond between carbon and nitrogen. The atoms are arranged in a straight line.
So, the correct option is 5.HCN.
Learn more about linear molecular geometry at https://brainly.com/question/14781399
#SPJ11
compounds that have two alkyl groups attached to an oxygen atom are called
Compounds that have two alkyl groups attached to an oxygen atom are called ethers. These compounds are commonly used as solvents and as reagents in various chemical reactions.
An ether is a class of organic compounds that consist of two alkyl or aryl groups bonded to the same oxygen atom. They are characterized by their unique structure, in which two hydrocarbon groups are connected to the same atom through a central oxygen atom. The oxygen atom is sp3-hybridized and possesses two unshared pairs of electrons.
Ethers have a general formula of R-O-R', where R and R' are alkyl or aryl groups. The simplest ether is dimethyl ether, which has two methyl groups attached to an oxygen atom. Ethers are usually named by naming the two alkyl or aryl groups bonded to the oxygen atom, followed by the word ether. For example, ethyl methyl ether has an ethyl group and a methyl group bonded to an oxygen atom.
To know more about chemical reactions visit:
https://brainly.com/question/29762834
#SPJ11
Suppose the galvanic cell sketched below is powered by the following reaction: Fe(s)+NiCl(aq) FeCl(aq)+Ni(s) E1 E2 Si S1 S2 Write a balanced equation for the half-reaction that happens at the cathode of this cell Write a balanced equation for the half-reaction that happens at the anode of this cell. of what substance is El made? OD 6 х Х $ $ ? of what substance is Ez made? What are the chemical species in solution SI? E What are the chemical species in solution 52?
The given equation is a reduction reaction, and it takes place at the cathode during the oxidation-reduction reaction. Half-reaction for FeCl2(aq) reduction reaction:
Fe2+ (aq) + 2e- → Fe (s)
The given oxidation reaction takes place at the anode in the galvanic cell is:
Ni (s) → Ni2+ (aq) + 2e-
FeCl2 and NiCl2 are the chemical species in solution SI and S2
The given equation is a reduction reaction, and it takes place at the cathode during the oxidation-reduction reaction. Half-reaction for FeCl2(aq) reduction reaction:
Fe2+ (aq) + 2e- → Fe (s)
Here, Fe2+ undergoes a reduction reaction and gains electrons to form Fe(s).
The given oxidation reaction takes place at the anode in the galvanic cell is:
Ni (s) → Ni2+ (aq) + 2e-
Therefore, the balanced equation for the anode half-reaction can be written as:Ni(s) → Ni2+(aq) + 2e-
The value of E1 is given, which means that it is the standard reduction potential of Fe2+.
The value of E2 is given, which means that it is the standard reduction potential of Ni2+.
FeCl2 and NiCl2 are the chemical species in solution SI.
FeCl2 and NiCl2 are the chemical species in solution S2.
To know more about chemical species visit:
https://brainly.com/question/32103069
#SPJ11
In 1986 an electrical power plant in Taylorsville, Georgia, burned 8,376,726 \rm tons of coal, a national record at that time.
Assuming that the coal was 86.0 \% carbon by mass and that combustion was complete, calculate the number of tons of carbon dioxide produced by the plant during the year.
The number of tons of carbon dioxide produced by the power plant during the year is 7,207,579.36 tons.
To calculate the number of tons of carbon dioxide produced by the power plant, we need to determine the amount of carbon in the coal and convert it to carbon dioxide.
Given:
Mass of coal burned = 8,376,726 tons
Carbon content in coal = 86.0%
First, we need to find the mass of carbon in the coal:
Mass of carbon = (Carbon content / 100) * Mass of coal
= (86.0 / 100) * 8,376,726 tons
= 7,207,579.36 tons
Since carbon dioxide (CO2) has one carbon atom and two oxygen atoms, the mass of carbon dioxide produced will be equal to the mass of carbon in the coal burned.
Therefore, the number of tons of carbon dioxide produced by the power plant during the year is 7,207,579.36 tons.
To know more about carbon dioxide visit:
https://brainly.com/question/25385913
#SPJ11
The first-order reaction, SO2Cl2 → SO2 + Cl2, has a half-life of 8.75 hours at 593 K. How long will it take for the concentration of SO2Cl2 to fall to 20.5% of its initial value?
A. 20.0 hr
B. 2.90 hr
C. 0.128 hr
D. 7.81 hr
The time taken for the concentration of SO2Cl2 to fall to 20.5% of its initial value is 7.81 hours.
So, the correct is option D) 7.81 hours.
What is the first-order reaction?
A first-order reaction is a chemical reaction in which the rate of reaction is proportional to the concentration of one of the reactants raised to the power of 1.
The formula for a first-order reaction is as follows:
Rate = k[A]^1
Where,
[A] represents the concentration of the reactant
k is the rate constant
The half-life of a reaction is the time it takes for the reactant concentration to decrease by half.
The half-life of a first-order reaction is calculated using the following equation:
ln (N0/N) = kt1/2 = (ln2) / k
Half-life = t1/2 = 8.75 hours
Initial concentration of SO2Cl2 = N0
Concentration of SO2Cl2 after some time = N
The concentration of SO2Cl2 has decreased to 20.5% of its initial value.
So, N/N0 = 0.205 = 20.5/100
We need to find the time taken (t) when the concentration of SO2Cl2 reduces to 20.5% of its initial value.
Now, let us find the rate constant (k) using the half-life equation.
t1/2 = (ln2) / k
k = (ln2) / t1/2
= (ln2) / 8.75 hours
k = 0.0791 / hour
Now, we can use the first-order integrated rate equation to find the time taken for SO2Cl2 concentration to fall to 20.5% of its initial value.
ln(N0/N) = kt
ln(N0/N) = 0.0791 x t
t = (ln(N0/N)) / 0.0791
t = (ln(1/0.205)) / 0.0791
t = 7.81 hours
Hence, the time taken for the concentration of SO2Cl2 to fall to 20.5% of its initial value is 7.81 hours.
Learn more about the first-order reaction:
brainly.com/question/26497269
#SPJ11
At what temperature will 41.6 g of Nitrogen exert a pressure of 815 torr in a 20.0 L container?
At temperature 304.5 / [tex](T_2 (V_1 / V_2))[/tex] will 41.6 g of Nitrogen exert a pressure of 815 torr in a 20.0 L container
Let's assume that the temperature at which the nitrogen is stored is [tex]T_1[/tex], and the final temperature at which the nitrogen exerts a pressure of 815 torr is [tex]T_2[/tex]. From the ideal gas law, we know that PV = nRT where P is the pressure of the gas, V is the volume of the container, n is the number of moles of the gas, R is the universal gas constant, and T is the temperature of the gas.
The number of moles of nitrogen is:
mass/molar mass = 41.6 g / 28.014 g/mol = 1.484 moles
The initial pressure [tex]P_1[/tex], volume [tex]V_1[/tex], and temperature [tex]T_1[/tex]are unknown.
The final pressure[tex]P_2[/tex] is 815 torr, volume[tex]V_2[/tex] is 20.0 L, the number of moles n is 1.484, and R is 0.0821 L.atm/K.mol.
Substituting the values into the ideal gas law:
[tex](P_1 V_1)/ (n R T_1) = (P_2 V_2)/ (n R T_2) (P_1 V_1)[/tex]/ (1.484 x 0.0821 x T1) = (815 x 20.0) / (1.484 x 0.0821 x T2) Rearranging the equation:
T2 = T1 x (815 x 20.0 x 1.484)/([tex]V_1[/tex]x 0.0821 x 1.484) = 304.5/T1
Therefore, [tex]T_2[/tex] and [tex]T_1[/tex]are inversely proportional to each other. This means that if[tex]T_2[/tex] increases, [tex]T_1[/tex]decreases proportionally, and vice versa.
So, in order to find [tex]T_2[/tex], we need to find [tex]T_1[/tex]. This can be done by rearranging the above equation :
T1 = 304.5 / [tex](T_2 (V_1 / V_2))[/tex] At the temperature [tex]T_1[/tex], the nitrogen will exert a pressure of 815 torr.
To know more about temperature refer here :
https://brainly.com/question/4735135
#SPJ11
system at a temperature of 300 k has an entropy of 100 j/k. it undergoes an isothermal process that increases the entropy to 101 j/k.
The formula ΔS = Q/T. The entropy of a system is defined as the measure of the degree of disorder or randomness of the system. In thermodynamics.
The change in entropy, Q is the heat added to the system, and T is the temperature of the system. Given that a system at a temperature of 300 K has an entropy of 100 J/K, and it undergoes an isothermal process that increases the entropy to 101 J/K.
In thermodynamics, the increase in entropy of a system is defined as the amount of heat that is added to the system divided by the temperature of the system:ΔS = Q/T where ΔS is the change in entropy, Q is the heat added to the system, and T is the temperature of the system. Given that a system at a temperature of 300 K has an entropy of 100 J/K, and it undergoes an isothermal process that increases the entropy to 101 J/K.
To know more about entropy visit:
https://brainly.com/question/32070225
#SPJ11
