When the temperature of a liquid increases, the viscosity of the liquid typically decreases, while the surface tension also decreases but to a lesser extent.
Viscosity is a measure of a fluid's resistance to flow, and it is affected by the intermolecular forces between the molecules of the fluid. When the temperature of a liquid increases, the kinetic energy of the molecules increases, which tends to weaken the intermolecular forces between them, causing the viscosity of the liquid to decrease. This is why liquids such as honey or molasses become less viscous when they are heated.
Surface tension, on the other hand, is a measure of the force required to break the surface of a liquid. It is caused by the cohesive forces between the molecules at the surface of the liquid. When the temperature of a liquid increases, the kinetic energy of the molecules also increases, which tends to weaken the cohesive forces between the molecules, causing the surface tension of the liquid to decrease. However, the effect of temperature on surface tension is relatively small compared to its effect on viscosity.
It is important to note that the specific effect of temperature on viscosity and surface tension depends on the type of liquid and the conditions under which it is measured. For example, some liquids, such as water, exhibit a maximum in their viscosity at a particular temperature (around 40°C for water), above which the viscosity begins to decrease. Additionally, the effect of temperature on surface tension can depend on the presence of impurities or surfactants in the liquid.
Learn more about kinetic energy here;
https://brainly.com/question/14959721
#SPJ4
What is the pressure in atm of 4.47mol of a gas in a 1.99L container at 368K?
help
Answer: the pressure of the atm is 616
Explanation:
as the temperature of an air mass increases, its volume ______ and density decreases.
As the temperature of an air mass increases, its volume increases, and its density decreases.
This is because warm air expands and takes up more space since its molecules move more quickly and widely. Although the volume has increased, the density has decreased since the same amount of air is now dispersed across a greater area. On the other hand, when air is chilled, its molecules slow down and close in on one another, which causes the air to constrict and increase in density.
Variations in air temperature and density can have a significant impact on weather and climate because they can alter how air masses behave, how clouds develop, and how air currents flow. So, understanding the relationship between temperature and density is crucial for forecasting and comprehending weather patterns as well as for making decisions regarding topics like air pollution and climate change.
Learn more about air mass
brainly.com/question/28270127
#SPJ4
Which response identifies a possible ψ for the last-filled electron in a magnesium ION?1. ψ3,3,02. ψ2,1,13. ψ2,0,−14. ψ2,0,05. ψ3,0,16. ψ3,1,1
The possible ψ for the last-filled electron in a magnesium ion is ψ 2,0,−1. Hence, the correct choice is C.
Generally, the electrons present in an atom are located in a system of atomic orbitals around the nucleus. The position of each electron is often controlled by a set of four quantum numbers. The electron configuration usually describes the distribution of all electrons present in the atom via shells and subshells. Shells are defined as the principal energy levels and subshells are the orbital types located at each shell, some of which may appear multiple times. Basically the electron configuration of a neutral atom is often derived from its element's position in the periodic table, which can then be modified to derive the electron configuration of a simple cation/anion.
The electronic configuration for magnesium ion is,
Mg²⁺ = 1s² 2s² 2p⁶
The last electron goes to "2p" subshell, which has the following quantum numbers,
n = 2, L = 0, m₁ = -1
Hence, the correct option is C.
Learn more about last filled electron from the link given below.
https://brainly.com/question/30751641
#SPJ4
galena's specific gravity is 7.5, that of quartz 2.65, and that of liquid mercury 13.6. given equal-sized samples (volumes) of galena and quartz, which will feel heavier? choose one: a. they will feel about the same. b. quartz c. galena
The specific gravity of quartz is 2.65, that of liquid is 13.6, and that of galena is 7.5. Which will feel heavier, provided with equal samples (volumes) of quartz and galena
Describe the liquid state.
Liquid state is an alternative title. In physics, liquid is one of the three fundamental states of matter and is a transitional state between a crystalline solid and a gas. The volume retention and conformity to the form of a liquid's container are two of its most noticeable physical characteristics.
What characteristics do liquids possess physically?
liquids' physical characteristics. In addition, whenever a liquid is moved from one container to another, it keeps its volume but loses its shape (as long that there is no vaporisation or temperature change). These characteristics make it simple to distinguish between the liquid state and the gaseous and solid states.
To know more about liquid visit:
#SPJ1
Which method could you use to
encourage more product, H2CO3, to
form from the reaction below?
H₂O(g) + CO2(g) → H2CO3(aq) + 316 kJ
As per the given reaction, it is an exothermic reaction. Hence, as the temperature decreases, the reaction shifts to forward reaction to form more carbonic acid.
What is carbonic acid ?Carbonic acid is an inorganic acid formed by the combination of water and carbon dioxide with higher concentration of water. It is an exothermic reaction. Hence, produce heat to the surroundings.
Carbonic acid is formed in the forward direction of the reaction. The reaction is exothermic and decrease in temperature leads to forward reaction.
Similarly the produced carbonic acid if removed from the system, the system again tends to produce more carbonic acid.
Find more on carbonic acid :
https://brainly.com/question/7095916
#SPJ1
A special engine can burn hydrogen gas in air to produce ONLY water vapor. Suppose the fuel tank contains 190.0 L of H2 gas at 23.00 atm pressure at 291K. If all of this gas is burned, what mass of water vapor is produced? Balanced Equations: 2H2 + O2 --> 2H2O
H2 and O2 have a mole ratio of 1:1 according to the equation. 4 moles of hydrogen gas, then, yield 4 moles of water. 4 x 18 = 72g is the quantity in kilograms of H2O produced.
How much water is created from 2H2O2 and 2H2O?The coefficients in the equilibrium constant 2H2+O22H2O 2 H 2 + O 2 2 H 2 O give the mole ratio of the products and reactants. According to this equation, 1 mole of Oxygen gas is required for every 2 molarity of H2 that are reacted, and 2 particles of Hydride O are created.
What conclusions can you draw from the solution 2H2 E O2 G 2H2O L?The variables of a chemical equation that is balanced show how many moles of each material are present. In this process, 2 molecules of hydrogen (H2) and 1 mole of oxygenation (O2) combine to form 2 moles of liquid water (H2O H 2 O).
To know more about hydrogen gas visit :
https://brainly.com/question/12745309
#SPJ1
what is molar mass of ethanol?
The molar mass of the ethanol is 46 g/mol. The ethanol is the covalent compound.
The chemical formula for the organic compound ethanol is C₂H₅OH.
The molar mass of the ethanol that is C₂H₅OH is as follows :
The molar mass of the ethanol, C₂H₅OH = 2(12) + 1 (6) + 1 (16)
The molar mass of the ethanol, C₂H₅OH = 46 g/mol
The ethanol is the covalent compound. The covalent bond is formed in between the atoms or the molecules by the mutual sharing of the electrons. The compound formed by the covalent bond is called as the covalent compound.
To learn more about molar mass here
https://brainly.com/question/22997914
#SPJ4
The _____system describes fatty acids in relation to the ________ end of the carbon chain and indicates the location of ______ double bonds.
The Delta system describes fatty acids in relation to the Carboxyl end of the carbon chain and indicates the location of the double bonds.
What exactly is a Delta system?Four wires make up the Delta configuration: three hot conductors and one ground conductor. The connection is established from one winding end to the starting end of the other, establishing a closed circuit, and the phase loads (such as motor windings) are connected to each other in the shape of a triangle.
The three phases are joined in a triangle-like fashion in the delta arrangement. They typically don't have a neutral cable. With a Y configuration, the phase voltage is equal to the line voltage divided by root 3 (sqrt(3) = 1.732), whereas in a Delta configuration the phase voltage is equal to the line voltage.
Learn more about fatty acids at:
https://brainly.com/question/17352723
#SPJ1
what does the term electron orbital describe?
Answer:
it's describe the atom because the other name for it is atom
Explain how potential energy and kinetic energy are the same .How are they different
The potential energy and kinetic energy are the same as they are interconvertible with each other. The potential energy occurs when the body is at rest and the kinetic energy occurs when the body is in the motion.
The Potential and the kinetic energy are two forms of the energy that can be converted in to the each other. Potential energy is the stored energy in the object or the system by the virtue of its the position or the arrangement of parts. The kinetic energy is the energy of the object or the system's particles in the motion.
When an object is at the rest, the body is said to have the potential energy. In another case, if the object is in the motion, then it is said to have the kinetic energy.
To learn more about kinetic energy here
https://brainly.com/question/15871064
#SPJ4
how do the properties of water differ from those of most other substances? chemistry
Water is a unique substance in many ways. Here are some of the ways in which the properties of water differ from those of most other substances:High specific heat capacity ,High heat of vaporization,High surface tension,Expansion upon freezing,Universal solvent.
Water can absorb a lot of heat energy thanks to its high specific heat capacity, which prevents temperature rise. Because of this, water is a great coolant and aids in regulating the temperature of living things.
Due to its high heat of vaporisation, turning water from a liquid to a gas requires a significant amount of energy.
It has a high surface tension, which causes it to cluster and condense into droplets. The capillary action depends on this characteristic.
One of the few materials that expands when it freezes is this one. Since it enables aquatic species to float on top of the ice in extremely cold temperatures, this characteristic is crucial for their survival.
For such more questions on properties of water:
brainly.com/question/2602094
#SPJ4
Balance the three equations below by adding the appropriate coefficients on the red lines.
In the text boxes below, count the number of atoms of each element on both sides of the equation to make sure they are equal.
4Na + O2 → 2Na2O
C + 2H2 → CH4
2H2O2 → 2H2O + O2
The amount of pollution that is economically most desirable is determined by plotting two curves. The point where the two curves meet is termed the from an economic viewpoint
The point where the two curves meet is termed the "optimal level of pollution" from an economic viewpoint.
The two curves that are plotted are the marginal cost of pollution abatement and the marginal cost of pollution damage. The marginal cost of pollution abatement represents the cost of reducing pollution, while the marginal cost of pollution damage represents the cost of the harm caused by pollution.
At low levels of pollution, the marginal cost of pollution abatement is low because only small reductions in pollution are needed. At the same time, the marginal cost of pollution damage is also low because the harm caused by pollution is minimal. As pollution levels increase, the marginal cost of pollution abatement increases because greater effort and cost is required to reduce pollution. Similarly, the marginal cost of pollution damage also increases because the harm caused by pollution becomes more severe.
The optimal level of pollution is the point where the marginal cost of pollution abatement intersects with the marginal cost of pollution damage. This point represents the level of pollution where the cost of reducing pollution is equal to the cost of the harm caused by pollution. Any deviation from this optimal level would result in either too much pollution or too much abatement, which would lead to economic inefficiencies.
Learn more about pollution:
brainly.com/question/28519286
#SPJ4
When 1-chlorobutane is treated with sodium hydroxide, two products are formed. what are these products?
The two products formed when 1-chlorobutane is treated with sodium hydroxide are 1-butene and 1-butanol.
The common name of 1-chlorobutane is Butyl chloride. The reaction of 1 -chlorobutane with sodium hydroxide is catalyzed by sodium iodide to give 1 -butanol.
1-Butene is the compound with the formula CH₃CH₂CH=CH₂. This is a colorless gas which easily condensed to give a colorless liquid. 1-butene is classified as a linear alpha-olefin. It is the organic compound with the formula CH3CH2CH=CH2.
1-Butanol is known as butan-1-ol or n-butanol. It is a primary alcohol with the chemical formula C₄H₉OH. It is of linear structure. The Isomers of 1-butanol are butan-2-ol and tert-butanol. It refers to the straight chain isomer.
To learn more about 1-Chlorobutane please visit:
https://brainly.com/question/26615309
#SPJ4
which pair of elements is likely to produce a highly polar covalent bond
Oxygen and Nitrogen elements are likely to produce a highly polar covalent bond.
The likelihood of a covalent bond forming between an element with low ionization potential and an element with strong electron affinity is quite high.
The atom that will bind with carbon to form a polar covalent bond is oxygen. This is because oxygen is the most prevalent chemical element that may join with carbon to create a polar covalent bond.
When atoms with various electronegativities share electrons in a covalent link, the result is a polar covalent bond. Think about the molecule of hydrogen chloride (HCl). In order to generate an inert gas electron configuration, each atom of HCl needs an additional electron.
To know about covalent bond
https://brainly.com/question/3447218
#SPJ4
Please help me D: !!
The density of ocean water is approximately 1.03 g/mL. How many grams of salt are dissolved in 1.5 L of ocean water solution? Round your answer to the ones place and include units and compound formula in your answer.
The concentration of salt in ocean water varies, but on average it is about 35 grams of salt per liter of water. Using this information, we can calculate the amount of salt in 1.5 L of ocean water solution as:
35 g/L * 1.5 L = 52.5 g
Therefore, there are approximately 52.5 grams of salt dissolved in 1.5 L of ocean water solution. It is important to note that the exact concentration of salt in ocean water can vary depending on factors such as location and depth, but this calculation provides a rough estimate based on average values. The compound formula for salt in this context is NaCl (sodium chloride).
some cars can use butane (c4h10) as feul 2c4h10+13o2->8co+10h2o
how many grams of h2o are produced 5.38 grams of o2
Answer:
Podemos utilizar la estequiometría de la reacción química para calcular la cantidad de agua (H2O) producida a partir de 5.38 gramos de oxígeno (O2).
La reacción química balanceada es:
2 C4H10 + 13 O2 → 8 CO + 10 H2O
La proporción molar entre O2 y H2O es 13:10. Primero, necesitamos determinar cuántos moles de O2 tenemos:
n(O2) = m(O2) / M(O2) = 5.38 g / 32 g/mol = 0.1681 mol
Según la estequiometría de la reacción, cada mol de O2 produce 10 moles de H2O. Ente
n(H2O) = 10 x n(O2) = 10 x 0,1681 mol = 1,681 mol
Finalmente, podemos calcular la masa de H2O producida:
m(H2O) = n(H2O) x M(H2O) = 1.681 mol x 18 g/mol = 30.258 g
Por lo tanto, se producen 30.258 gramos de H2O a partir de 5.38 gramos de O2.
Explanation:
espero te sirva
Show a numerical setup for converting 120. kPa to atmospheres.
Answer and Explanation:
To convert 120 kPa to atmospheres, we can use the following conversion factor:
1 atmosphere = 101.325 kPa
We can use this conversion factor to set up a proportion and solve for the number of atmospheres.
120 kPa * (1 atm / 101.325 kPa) = 1.184 atm
Therefore, 120 kPa is equivalent to approximately 1.184 atmospheres (rounded to three decimal places).
QuestionIn Xylem_____ and _____ transport minerals vertically.ATracheidsBVessels
In Xylem tracheids and vessels transport minerals vertically.
Water and mineral transportation in plants:
1. Phloem carries nutrients, whereas xylem carries water and minerals.
2. The phloem and xylem are the principal tissues in charge of this flow.
Tracheids:
1. The xylem of vascular plants contains tubular cells called tracheids, which are in charge of carrying root water to the leaves.
2. They exist in all varieties of vascular plants (Pteridophytes, and Gymnosperms).
3. They feature a thin cell wall and cross-sections that are polygonal.
Vessels:
1. Vessels are elongated dead cells with ruptured cell walls that are found in the transpiration stream of flowering plants and allow water to pass through.
2. They are only found in angiosperm plants.
To know more tracheids about click here .
brainly.com/question/15302827
#SPJ4
How can you differentiate pressure, cryogenic, liquid, and solids containers from a distance, and what types of hazardous materials are each likely to contain
Differentiating pressure, cryogenic, liquid, and solid containers from a distance can be challenging, as their visual appearance may be similar. However, some general guidelines can help identify the type of container and the likely contents:
Pressure containers are typically cylindrical and have pressure relief valves, gauges, and safety fittings. They are designed to store gases under high pressure and are likely to contain compressed gases such as hydrogen, oxygen, or nitrogen.
Cryogenic containers are heavily insulated and designed to store liquefied gases at very low temperatures. They often have a distinctive shape, with a wide base and a narrow neck. Cryogenic containers may contain liquefied gases such as nitrogen, helium, or argon.
Liquid containers may be similar in appearance to cryogenic containers but do not require heavy insulation. They are designed to store liquids such as chemicals, fuels, or solvents.
Solid containers are typically smaller and may be made of plastic or metal. They are used to store solid hazardous materials such as explosives, flammable solids, or oxidizing agents.
It's important to note that hazardous materials can be stored in any type of container, and that the container itself may not always be a reliable indicator of the contents. Proper labeling, placarding, and handling procedures should always be followed to ensure the safe transport and storage of hazardous materials.
Learn more about pressure:
brainly.com/question/15175692
#SPJ4
what is an observation chem 107
The next general chemistry subject is CHEM 107: General College Chemistry II, which comes after CHE 105. Due to the heavy math and extensive equation memorization required, some individuals find CHEM 107 to be more difficult than CHE 105.
Fundamentals of Chemistry, or CHEM 107, is a required subject for students majoring in allied health, engineering, or science. It examines general chemistry topics. States of matter, atomic structure, the periodic chart, bonds, nomenclature, chemical reactions, chemical equations, and quantitative connections are some of the subjects covered. The target audience for this course is primarily students planning to enroll in more advanced chemistry classes. CHEM 108 functions as the supplementary lab for students who require one. 1 hour of recitation and 3 lesson hours each week. Every autumn and spring, as well as possibly during additional sessions, the course is offered.
To know more about chemistry:
https://brainly.com/question/20539100
#SPJ4
how many moles are contained in 15.6 g of nh4cl?
The number of the moles are contained in the 15.6 g of the NH₄Cl is the 0.29 mol.
The mass of the NH₄Cl = 15.6 g
The molar mass of the = 53.49 g/mol
The number moles of the NH₄Cl is as follows :
The number of the moles = mass / molar mass
Where
The mass = 15.6 g
The molar mass = 53.49 g/mol
The number of the moles = 15.6 / 53.49
The number of the moles = 0.29 mol
Thus, the number of the moles of the NH₄Cl is 0.29 mol with the mass of the 15.6 g.
To learn more about moles here
https://brainly.com/question/26416088
#SPJ4
Which structure increases the reabsorption of na when stimulated by aldosterone? a) loop of henle
b) collecting duct c) bowmanʹs capsule d) proximal tubule e) distal tubules
e) distal tubules structure increases the reabsorption of Na when stimulated by aldosterone.
The nephron segment immediately upriver of the macula densa is the distal convoluted tubule. Despite its short distance, the distal convoluted tubule is essential for sodium, potassium, and covalently bonded cation homeostasis.
Recent genetic but also physiologic research has significantly enriched our knowledge of how the proximal convoluted tubule controls these methods at the molecular.
The distal convoluted tubule (DCT) seems to be the nephron segment immediately downstream of both the macula densa. But even though the DCT is really the quickest segment of both the nephron, measuring only about 5 mm in size in humans.
Learn more about distal convoluted tubule here:
https://brainly.com/question/28196085?referrer=searchResults
#SPJ4
Whitch statement describe an ideal gas select all correct answers
-The average energy of the particles change as collisions occur
-The particles are in constant motion
-particles both attract and repel each other
-the average energy of the particles depends on the temperature
-volume of the particles doesn’t affect the behavior of the gas
1. The particles are in constant motion.
2. The average energy of the particles depends on the temperature.
3. Volume of the particles doesn't affect the behavior of the gas.
the aquatic plant elodea was placed in distilled water and a 10% sodium chloride solution. which caused the cells to swell? what keeps the cells from bursting?
When the aquatic plant elodea was placed in distilled water and a 10% sodium chloride solution the distilled water would cause the plant to swell and the cells wouldn't burst because of the framework cell wall.
When the aquatic plant elodea cells are placed in distilled water (100% water), the water moves inside the elodea cells by osmosis and starts the swelling of the cells. When the elodea cells are placed in a 10% sodium chloride solution, which is hypertonic, the vacuoles disappear and the protoplasm detaches from the cell wall and the organelles appear as clumped in the middle of the cell. The cytoplasm of a elodea cells shrink (Plasmolysis) in response to diffusion of water out of the elodea cells into the herpotnic, the10% sodium chloride solution. The rigid cell wall of elodea cells prevents them from bursting.
Learn more about elodea plant from the link given below.
https://brainly.com/question/29775363
#SPJ4
why would exposing potassium t-butoxide to air cause problems?
What exposing potassium t-butoxide to air can cause is;
Lung damage when inhaled
Severe chemical burns when in contact with skin
What is the impact of the chemical substance to the environment?Potassium t-butoxide is a colorless solid which is a strong base, which is useful in organic synthesis.
Potassium tert-butoxide catalyzes the reaction of hydrosilanes and heterocyclic compounds to give the silyl derivatives, with release of Hydrogen gas.
This potassium t-butoxide when exposed to the air can cause respiratory irritation in some persons.
The body's response to such irritation can cause further lung damage.
Inhaling corrosive bases may irritate the respiratory tract.
The symptoms include cough, choking, pain and damage to the mucous membrane.
Persons with impaired respiratory function, airway diseases and conditions such as emphysema or chronic bronchitis, may incur
further disability if excessive concentrations of particulate are inhaled.
Read more about Impact of chemical substance at; https://brainly.com/question/899775
#SPJ1
which plate boundary(ies) are convergent?
a
b
c
d
which one is the answer because I need the answer
We should note that a convergent plate boundary occurs where tectonic plates converge, then, the one with thin oceanic crust subducts beneath the one capped by thick continental crust. Due to the incomplete question, we will give a general knowledge on the boundary type.
Which type of plate boundary are convergent?Convergent plate boundaries are a type of tectonic plate boundary where two tectonic plates are moving towards each other. At these boundaries, the two plates collide, causing one plate to be forced beneath the other in a process called subduction.
There are three types of convergent plate boundaries, which are defined which are defined by the type of tectonic plates involved:
Oceanic-continental convergent boundary: This occurs when an oceanic plate collides with a continental plate. The denser oceanic plate subducts beneath the lighter continental plate, creating a deep-sea trench, and often leads to volcanic activity.Oceanic-oceanic convergent boundary: This occurs when two oceanic plates collide. One of the plates subducts beneath the other, leading to the formation of a deep-sea trench, and can result in the formation of volcanic island arcs.Continental-continental convergent boundary: This occurs when two continental plates collide. Because both plates have a low density, neither plate subducts beneath the other. Instead, the collision causes the plates to buckle and fold, leading to the formation of mountains.Read more about convergent plate
brainly.com/question/18981564
#SPJ1
how much citric acid in red bull
The amount of the citric acid in the red bull is the 0.43 %.
The Citric acid is the organic compound with the chemical formula of the HOC(CH₂CO₂H)₂. The citric acid is the colorless weak organic acid. It will occurs naturally in the citrus fruits. In the biochemistry, the citric acid is the intermediate in the citric acid cycle, that will occurs in the metabolism of all the aerobic organisms.
The Citric acid will gives the Red Bull and its slightly sour kick and it is also acts as the preservative, while the magnesium carbonate helps to neutralize some of the acidity.
To learn more about citric acid here
https://brainly.com/question/17607113
#SPJ4
what is mass of nitrogen
Nitrogen has an atomic mass of approximately 14.0067 atomic mass units (u) and a molar mass of approximately 14.0067 grams per mole (g/mol).
Understanding the Mass of Nitrogen
Nitrogen is a chemical element with the symbol N and atomic number 7. It is a colorless, odorless, and tasteless gas that makes up about 78% of the Earth's atmosphere. The mass of nitrogen depends on the quantity of nitrogen being measured. The atomic mass of nitrogen is approximately 14.0067 atomic mass units (u), which is the average mass of one nitrogen atom. The molar mass of nitrogen, which is the mass of one mole of nitrogen atoms, is approximately 14.0067 grams per mole (g/mol). One mole of nitrogen contains
Avogadro's number of nitrogen atoms, which is approximately 6.022 x 10^23. If you have a specific quantity of nitrogen, you can calculate its mass by multiplying the quantity by the molar mass of nitrogen. For example, if you have 2 moles of nitrogen, the mass of nitrogen would be 2 x 14.0067 g/mol, which is approximately 28.0134 grams. Understanding the mass of nitrogen is important in various scientific fields, including chemistry, physics, and biology, as well as in industrial applications such as fertilizer production and food packaging.
To know more about nitrogen-nitrogen bond,
visit:https://brainly.com/question/16711904
#SPJ4
PLEASE BE DESCRIPTIVE I AM STUCK ON THIS TOPIC THANK YOU
Aluminum chloride reacts with fluorine in
a single replacement reaction. What is
the coefficient for aluminum chloride?
[?]AICI3 + F₂ → AIF3 +
Cl₂
The balanced equation is; 3F2 + 2AlCl3 → 2AlF3 + 3Cl2 the coefficient for aluminum chloride is 2
How do you balance reaction equation?The steps in balancing reaction equation is;
Write the unbalanced equation: Start by writing the unbalanced equation for the chemical reaction you wish to balance.
Count the atoms: Count the number of atoms of each element in the reactants and the products. You can use the chemical formula of each compound to do this.
Balance the elements: Balance each element one at a time. Begin with the elements that appear in only one compound on either side of the equation.
Use coefficients: To balance the equation, add coefficients in front of the chemical formulas for the reactants and products. Do not change the subscripts in the chemical formulas.
Check the balanced equation: After adding coefficients, check the equation to make sure that the same number of atoms of each element appears on both sides of the equation.
Verify the equation: Finally, make sure that the equation is fully balanced by counting the number of atoms on both sides of the equation.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
