Which blue box in the picture below marks the rock layer that is the most likely the oldest assuming the layers have not experienced folding or uplifting?
Answers
The rock layer that is the most likely the oldest assuming the layers have not experienced folding or uplifting is Layer Z.
The oldest rock layer is what?According to the law of superposition, the rock strata (layers) that are furthest below the earth's surface are the oldest (having formed first), and the rock strata (layers) that are closest to the surface are the youngest.
Therefore, In actuality, the oldest fossils that have ever been discovered are 3.5 billion year old cyanobacteria found in Archaean rocks in western Australia. Since the oldest rocks are only slightly older—3.8 billion years old—this might come as a surprise.
Learn more about rock layer from
https://brainly.com/question/23437558
#SPJ1
See options below
Which blue box in the picture below marks the rock layer that is the most likely the oldest assuming the layers have not experienced folding or uplifting?
Layer W
Layer X
Layer Y
Layer Z
Related Questions
The neutron particles were isolated by Chadwick and contained a neutral electrical charge. When was this discovered in relation to other scientist's atomic hypotheses?
After Rutherford but before Thompson
Before Thompson but after Bohr
Before Bohr and Rutherford
After Thompson and Rutherford
Answers
The elementary particles known as neutrons inside the nucleus of an atom were discovered by James Chadwick in 1932 after Thomson and Rutherford. Therefore, option (D) is correct.
What is a neutron?The neutron can be described as a subatomic particle and represented by the symbol 'n' which has a neutral charge, and a mass slightly greater than that of a proton. Protons and neutrons are present inside the nuclei of atoms and behave similarly within the nucleus, and each has a mass of one atomic mass unit.
The discovery of the neutron and its properties gave extraordinary developments in atomic physics in the 20th century.
The atomic nucleus's nature was described with the discovery of the neutron by James Chadwick in 1932. The uncharged neutron was exploited as a new means to study nuclear structure, leading to such discoveries as the formation of new radioactive elements.
Learn more about Neutron, here:
https://brainly.com/question/13131235
#SPJ1
Please draw all four bonds at the sp2 carbons and at chiral carbons, including those to hydrogen. Provide the structure for compound B in the given synthesis. Be sure to consider the stereochemistry of the product as well as the mechanism for the reaction of Br2 with compound B when formulating your answer. CH3 NaOCH3 Br2H Br H3C CH3 CH3OH a "2-bromo- 3-methylpentane" enantiomer Synthetic target
Answers
An atom-to-atom attraction that enables the synthesis of chemical compounds with two or more atoms.
Chemical bonding is the process through which two or more atoms, molecules, or ions form a chemical link to create a chemical compound. The atoms in the resultant molecule are held together by these chemical bonds. Therefore, it is clear that chemical compounds depend on the strength of the chemical bonds between their constituents; the more stable the resulting molecule, the stronger the bonding between the constituents.
Elimination reaction is carried out on 2-Bromo-3-methyl pentane in the first stage via an E2 mechanism. This results in 2E-3-methylpent-2-ene, product B. B is brominated, and as it passes through an intermediate cyclic bromonium ion, it produces a mixture of enantiomers.
To know more about Chemical Bond, refer to this link:
https://brainly.com/question/819068
#SPJ4
Calculate the amount of heat needed to boil 111. g of octane (C2H18), beginning from a temperature of 25.1 °C. Be sure your answer has a unit symbol and the correct number of significant digits. 0x10 Х
Answers
The amount of heat required to boil 111 grams of octane is 24.76 Joules.
The mass of Octane (C₂H₁₈) that is to be heated and boil is 111 Grams. The initial temperature of octane is 25.1 degrees Celsius,
The boiling point of octane is 125.6 degrees Celsius.
The specific heat of octane is 2.22 J/kg-K.
Converting the temperatures into Kelvin, the initial temperature is 298.25 K and final temperature is 398.75 K.
The heat required is given by,
Q = MCΔT
Cis specific heat, M is mass, and ΔT is the change in temperature, putting values.
Q = 0.111 x 2.22 x 100.5
Q = 24.76 Joules.
So, the heat required is 24.76 Joules.
To know more about Specific Heat, visit,
https://brainly.com/question/21406849
#SPJ4
roberto wants to estimate the proportion of first-year students at an assembly meeting. he surveys 60 students and finds that 24 of them are first-year students. identify the values needed to calculate a confidence interval at the 95% confidence level. then find the confidence interval.
Answers
The confidence interval is 0.4.
p' = 24/60 = 0.4
\sigma_{p'}=\sqrt{\frac{0.4*0.6}{60}}\approx 0.063
z_{\frac{\alpha}{2}} = z_{0.025} = 1.960 (From the given table)
CI = (0.4-1.960*0.063, 0.4+1.960*0.063) =\mathbf{ (0.277,0.523)}
A student is someone enrolled in a school or different educational institution. in the united kingdom and maximum commonwealth countries, a "student" attends a secondary college or higher; the ones in number one or basic faculties are "pupils".
The definition of "student" once changed into "one who studies something". nowadays it is able to suggest simply "person who attends a school, college, or university". this contemporary definition does not even advocate that the man or woman does greater than "attend".
The terrific scholar is one that can paint in a collection, motivate others, and yield efficient output. Being high quality, beneficial, cooperative, and pleasant are all of the developments of a great student. Such students emerge as tremendous crew gamers and leaders once they develop.
Learn more about students here:-https://brainly.com/question/25976025
#SPJ4
The iron (55.847 g/mol) in a 700.0 mL sample of a natural water was determined by precipitation of the cation as hydrated Fe2O3. The precipitate was filtered, washed, and ignited in a crucible to form Fe2O3 (MW = 159.69 g/mol). The mass of the product was 0.1084 g. Calculate the ppm iron in the water.
Answers
The parts per million (ppm) iron in the water is 108.31.
Parts per million (ppm) is a notation used to describe the amount of a substance (usually very small) in a solution. It means part of a million and in chemistry, it is usually expressed as milligrams per liter (mg/L).
ppm = mass of substance/liter of solution
Convert the given mass of precipitate formed (Fe₂O₃) into moles.
moles Fe₂O₃ = mass Fe₂O₃/ MW Fe₂O₃
moles Fe₂O₃ = 0.1084 g/ 159.69 g/mol
moles Fe₂O₃ = 6.788 x 10⁻⁴
In 1 mole of Fe₂O₃, there are 2 moles of Fe. Hence, there are 1.35 x 10⁻³ moles Fe.
1 mole of Fe₂O₃ : 2 moles of Fe = 6.788 x 10⁻⁴ : 1.35 x 10⁻³
Convert the calculated moles of Fe into mass.
mass Fe = MW Fe x moles Fe
mass Fe = (55.847 g/mol)(1.35 x 10⁻³ mol)
mass Fe = 0.0758 g
Divide the mass of iron (Fe) with the volume of solution to get the ppm.
ppm = mass of substance/liter of solution
ppm = (0.0758 g)(1000mg/g) / (700.0 mL)(L/1000mL)
ppm = 108.31
Learn more about ppm here: https://brainly.com/question/16727593
#SPJ4
Consider a system made up of 5 sub-systems A, B, C, D, and E that are in thermal contact with each other and isolated from the surroundings. The sub-systems were all initially at different temperatures, but after a redistribution of heat among these sub-systems, thermal equilibrium was established and all sub-systems had the same temperature. The following is a description of the heat flow with respect to sub-systems A, B, C and D:Sub-system A lost 7 kJ of heatSub-system B gained 4 kJ of heatSub-system C lost 1 kJ of heatSub-system D gained 3 kJ of heatWhat happened to sub-system E?
Answers
Sub-system E gained 1kJ of heat. Heat is the result of the movement of kinetic energy within a material or an item, or from an energy source to a material or an object.
What is heat ?The exchange of "thermal" energy brought on by a temperature differential is known as heat. Think of an isolated system with two subsystems that are initially operating at two distinct temperatures. The higher temperature subsystem 2 transfers energy to the lower temperature subsystem 1.The measured amount of energy is designated by the letter q. This process happens on its own, and we have all encountered its basic characteristics. The opposite process, which involves a spontaneous energy transfer between two subsystems that are initially at the same temperature and results in a difference in temperature, never happens.From the equation
qA + qB + qC + qD + qE = 0
we can solve to get
qE = -(qA + qB + qC + qD)
Reading through the problem , we can make the following variable assignment :
qA = -7 KJ
qB = 4 KJ
qC = -1 kJ
qD = 3 kJ
substituting these values into the equation , we have
qE = -((-7kJ ) + 4kJ + (-1kJ) + 3kJ) = -(-1kJ) = 1kJ
To learn more about heat refer :
https://brainly.com/question/15346710
#SPJ4
use the formal charge for each atom in each of the lewis structures given, to predict which one more likely shows the correct connectivity for nof.
Answers
Use the formal charge for each atom in each of the lewis structures given, to the one more likely shows the correct connectivity for NOF is
O = N - F.
formal charge for N = O - F
formal charge = valence electrons - non bonding electrons - (1/2) bonding
electrons
formal charge for N = 5 - 4 - (1/2) 4
= -1
formal charge for O = 6 - 2 - (1/2)6
= +1
formal charge for F = 7- 6 - (1/2)2
= 0
formal charge for O = N - F
formal charge for N = 5 - 2 - (1/2)6
= 0
formal charge for O = 6 - 4 - (1/2) 4
= 0
formal charge for F = 7 - 6 - (1/2)2
= 0
Thus, Use the formal charge for each atom in each of the lewis structures given, to the one more likely shows the correct connectivity for NOF is O = N - F because in this structure all atoms have zero formal charge.
To learn more about formal charge here
https://brainly.com/question/28811018
#SPJ4
rapid chemical reactions throughout the body allow you to respond quickly to danger or stress. which two systems are responsible for this reaction?
Answers
rapid chemical reactions throughout the body allow you to respond quickly to danger or stress. the nervous system and the endocrine system are responsible for this reaction.
Chemical processes that are finished quickly less than 10^6 seconds are referred to as rapid chemical reactions. German and American researchers recently announced a remarkable achievement: they saw the quickest chemical reaction ever, in which hydrogen atoms attach to a sheet of graphene and subsequently separate from it in a matter of ten quadrillionths of a second. Techniques for rapid chemical reactions developed for analysing membrane-bound proteins.
The classical doctrine of the nervous system in biology establishes that it is a highly sophisticated component of an animal that coordinates its movements and sensory data by sending and receiving signals to and from various sections of its body. The brain, spinal cord, and an intricate web of nerves make up the nervous system.
learn more about rapid chemical reactions here
https://brainly.com/question/8607780
#SPJ4
What is the relationship between atoms, elements, compounds, and mixtures
Answers
Answer:
All elements, and compounds, all matter in point of fact, are composed of atoms. In a compound, there are 2 or more different types of atoms present that are chemically bound. In an element, there is only the one type of atom.
Explanation:
How fast is a ball going when it hits the ground after being dropped from a height of 9 m? The acceleration of gravity is 9.8 m/s
Answers
Answer:
[tex]\huge\boxed{\sf v_f = 1.48\ m/s}[/tex]
Explanation:
Given Data:Height = h = 9m
Acceleration due to gravity = g = 9.8 m/s²
Initial Velocity = Vi = 0 m/s
Required:Final Velocity = Vf = ?
Formula:[tex]2gh = v_f^2 - v_i^2[/tex] (Third equation of motion for free-falling bodies)
Solution:2(9.8)(9) = vf² - 0²
2.18 = vf²
vf² = 2.18
Take sq. rt on both sides
vf = 1.48 m/s[tex]\rule[225]{225}{2}[/tex]
if the mercury in a barometer raises 21.0 centimeters due to a change in ambient pressure, what is the corresponding change in pressure in atm?
Answers
The corresponding change in pressure in atm is 0.276 atm.
How does pressure work?Physical pressure applied to an object. Per unit area, a perpendicular force is delivered to the area of the objects. Pascals are a unit of pressure (Pa).
Briefing :
The change in pressure in the mercury barometer is given by ΔP = ρgh where
ρ = density of mercury = 13600 kg/m³,
g = acceleration due to gravity = 9.8 m/s² and
h = height of mercury = 21 cm = 0.21 m
So, ΔP = ρgh
= 13600 kg/m³ × 9.8 m/s² × 0.21 m
= 27988.8 kg/m-s²
= 27988.8 N/m²
= 27988.8 Pa
The change in pressure in atm
Since 1 atm = 101325 Pa
27988.8 Pa = 27988.8 Pa × 1 atm/101325 Pa
= 0.276 atm
So, the corresponding change in pressure in atm is 0.276 atm.
To know more about pressure visit :
https://brainly.com/question/12152879
#SPJ4
A researcher uses several procedures to separate a rock sample into different chemicals. A mass of 50 grams of one chemical is produced. If this chemical cannot be separated into other chemicals, then it is best described as.
Answers
A mass of 50 grams of one chemical is produced. If this chemical cannot be separated into other chemicals, then it is best described as an element.
An element is a pure substance that cannot be chemically or physically broken down into simpler substances. Elements are the simplest form of matter, so they cannot be broken down into simpler substances chemically or physically. Elements are the building blocks of all other matter.
Atoms cannot be created or destroyed in chemical reactions so elements such as phosphorus and sulfur cannot be broken down into simple substances by these reactions. A compound is a substance composed of two or more chemically bonded elements that can be separated into simpler substances only by chemical means. Elements are pure substances that cannot be broken down into simple substances by ordinary chemical means.
Learn more about A mass here:-https://brainly.com/question/19385703
#SPJ4
light energy is converted to chemical energy in the form of glucose (c6h12o6) through the process of photosynthesis in plants and other producers. this chemical energy is used for movement, growth, reproduction, heat generation, and other cellular processes--including cellular respiration--in producers and organisms that eat producers. to understand energy flow from producers to consumers, you must have a firm grip on the summary equations for both photosynthesis and cellular respiration. drag the reactants and products to their correct locations in the following summary equations. the labels may be used more than once.
Answers
In the reaction of photosynthesis carbon dioxide and oxygen to form glucose.
photosynthesis, is the process by which green plants and certain other organisms transform light energy into chemical energy. During photosynthesis in green plants, light energy is captured and is used to convert water, carbon dioxide, and minerals into oxygen and energy-rich organic compounds such as glucose.
It would be impossible for us to overestimate the importance of photosynthesis in the maintenance of life on Earth. If photosynthesis stops, there would soon be little food or other organic matter on Earth. Most organisms would disappear, and in time Earth’s atmosphere and would become nearly devoid of gaseous oxygen
Hence the reaction for photosynthesis is as follows;
[tex]6CO_{2}[/tex] + [tex]6H_{2}O[/tex] → [tex]C_{6}H_{12}O_{6}[/tex] + [tex]6O_{2}[/tex]
To know more about photosynthesis
https://brainly.com/question/1388366
#SPJ4
How much CO2 in grams is form?.
Answers
The weight of CO2 is 44 grams per mole.
CO2 is considered to be minimally toxic by inhalation. The main health effects of CO2 are the result of its behavior as a simple asphyxiant. A simple asphyxiant is a gas that reduces or replaces the normal oxygen in the air you breathe. Symptoms of mild CO2 exposure include headaches and drowsiness.
Too much CO2 in the blood means that the body is not removing CO2 from him properly. Higher than normal levels of CO2 in your blood can indicate health problems such as B.Respiratory alkalosis or metabolic alkalosis. Natural sources of carbon dioxide include most animals that exhale carbon dioxide as waste.
Learn more about Carbon dioxide here:-https://brainly.com/question/25385913
#SPJ4
Compare the room temperature resistance for all the samples listed. Are they similar or different?
Carbon: 1 kΩ
Silicon: 192 kΩ
Germanium: 46 kΩ
Tin: Low, but not likely to change much with temperature change
Answers
The resistance of carbon, silicon, germanium and tin are different at room temperature.
The obstruction to current flow in an electrical circuit is measured by resistance. The Greek letter omega (Ω) represents the unit of measurement for resistance, known as ohms. Georg Simon Ohm, a German physicist who investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance.
V= I x R
The current flow decreases as resistance increases. If abnormally high, damaged conductors from corrosion or burning could be one of several potential causes. The current flow increases as the resistance decreases.
The increasing order of resistance is tin < carbon < germanium < silicon
Hence, different elements have different resistance at room temperature
To know more about resistance
https://brainly.com/question/29427458
#SPJ1
what are the factors that control the rate of chemical weathering and those that control the rate of physical weathering
Answers
Major factors of both weathering rates and weathering types are water and temperature.
What is weathering?Water is necessary for chemical weathering reactions to take place, and temperature affects both weathering rates and the types of weathering that take place. Ice wedging cannot occur without water. Chemical processes are accelerated by higher temperatures.A process known as weathering is when the countless rocks and minerals found on the earth's surface are significantly broken down into tiny fragments. Various elements, such as water, wind, ice, etc., speed up the weathering process.When substances like ice, rushing water, wind, rapid heating or cooling, or plant growth exerts force on rock, it breaks the rock physically or mechanically. Chemical weathering is a mechanism in which a substance dissolves a rock, resulting in the rock's fragments falling away.
To learn more about weathering refer to :
https://brainly.com/question/11130040
#SPJ4
What information must be included on the label of a container?.
Answers
An original chemical container must have an English-language label that is both readable and clear. Along with the manufacturer's name and address.
It must include the chemical or product name as it appears on the SDS. Invalid or missing information on the label should prevent the acceptance of materials. any substance (in the form of an acid) created when two or more other compounds interact with one another or utilized to alter another substance done by manufacturer's.
Chemical container labelling is one of the best and most efficient ways to alert your coworkers about hazards and prevent accidents and injuries.
The downstream consumers of these chemicals must adhere to the labelling requirements on the original container labels, just as chemical manufacturer's are required to do.
Learn more about chemical here
https://brainly.com/question/29240183
#SPJ4
analyze the relative rates of the reduction of benzil in different solvents (members 1, 3 and 4). (is one clearly faster than the others? were there any large observational differences while the reactions ran?)
Answers
A pure chemical is examined using four different solvents and normal phase TLC. According to the Rf values listed below, the most polar solvent system is 0.25 Solvent.
The current compound price is $38.56, and there have been $16,761,507 trades in the last 24 hours. COMP's price increased by 0.9% the day before. There are 10 million COMP coins in total, with 6.9 million currently in circulation. If you want to buy or sell compound, Coinbase Exchange is now the most active platform. One type Solvent of compound interest formula is the weekly compound interest formula. The Compounded Quarterly Formula is used to calculate monthly compounded interest.
To learn more about Solvent please click on below link
https://brainly.com/question/14797683
#SPJ4
What are examples of carbon emissions?.
Answers
Scope 1 emissions include things like gas stoves and personal vehicles. Scope 2 emissions include things like businesses that produce carbon emissions but also buy power.
Exhaust gas, also referred to as vehicle emissions, can contain a variety of pollutants and greenhouse gases. Flue gases, which are released through the plant's smokestack, are also produced by power plants that burn fossil fuels, such as coal-fired power plants or natural gas power plants. They are similar to exhaust gases in composition. Having the chemical symbol C and atomic number 6, carbon is an element with the meaning "coal" in Latin. It is nonmetallic and tetravalent, meaning that four of its atom's electrons can be used to create covalent chemical connections. Is called as carbon.
Learn more about carbon here
https://brainly.com/question/22530423
#SPJ4
what mass of copper will be deposited when 18.2 a are passed through a cuso4 solution for 45.0 minutes? a) 16.2 g b) 33.4 g c) 40.6 g d) 81.3 g e) 163 g
Answers
The mass of copper that will be deposited when a current of 18.2 A is passed through the solution is 16.2 g (Option A)
How do I determine the mass of copper?We'll begin by obtaining the charge that will pass through the solution in the given time. This is shown below:
Current (I) = 18.2 ATime (t) = 45 mins = 45 × 60 = 2700 sCharge (Q) = ?Q = It
Q = 18.2 × 2700
Q = 49140 C
Now, we shall calculate the mass of copper that will be deposited. This can be obtained as follow:
Cu²⁺ + 2e —> Cu
Molar mass of Cu = 63.55 g/mol Mass of Cu from the balanced equation = 1 × 63.55 = 63.55 g1 e = 96500 C2 e = 2 × 96500 = 193000 CFrom the balanced equation above,
193000 C deposited 63.55 g of copper
Therefore,
49140 C will deposit = (49140 × 63.55) / 193000 = 16.2 g of copper
Thus, the mass of copper deposited is 16.2 g (Option A)
Learn more about mass:
https://brainly.com/question/27136699
#SPJ1
What is sampling procedure in Research example?.
Answers
Sampling is the process of choosing the group from from which you'll actually collect data for your study.
What does chemical research entail?Chemistry undergraduate research is independent experimentation carried out under the direction and supervision of something like a mentor or adviser. In an ongoing study project, students look at topics that interest them and their adviser. The chemical sciences cover a wide range of subject areas.
What kinds of research are there in chemistry?Modern chemistry research may be divided into two categories: pure and applied. Pure chemistry researchers work primarily to improve human knowledge of chemistry. Greater comprehension of the ideas behind how matter changes during chemical reactions is what pure chemistry is all about.
To know more about Research visit:
https://brainly.com/question/3628862
#SPJ4
Which is the formula to add values from cell A2 to cell A10?.
Answers
Answer: A12????
Explanation:
Is the formation of iron rust endothermic or exothermic?.
Answers
The formation of iron rust is an exothermic process.
Rusting of iron refers to the formation of rust, which is a mixture of iron oxides, on the surface of iron objects or any other structures. This rust is formed from a redox reaction between oxygen and iron in the environment containing water such as air containing high levels of moisture. The rusting of iron is generally characterized by the formation of a layer of a red, flaky substance that easily crumbles into a powder after some time.
The rusting of iron is basically a gradual burning process. It is very exothermic in nature, however, due to the slowness of the process, the heat generated is lost before producing an actual temperature increase.
However, if the iron is dispersed in microscopic particles so that more of its surface comes into touch with oxygen, and the temperature is raised by rigorous friction at the same time, you can see genuine bright burning of iron.
To know more about iron rust
https://brainly.com/question/18376414
#SPJ4
why is the methyl group in toluene an ortho para director? explain using the reaction mechanism and drawings to support your answer
Answers
In toluene, the methyl attached to a benzene ring increases the electron density at the ortho and meta position by resonance but does not change the electron density at the meta position of the ring. Therefore, the methyl group in toluene is ortho and para-directing.
What is resonating structure?Resonance structures can be described as sets of Lewis structures that explain the delocalization of electrons in a polyatomic ion or molecule.
A single Lewis structure fails to describe the bonding to a molecule due to the presence of fractional bonds and partial charges. In such cases, resonance structures can be used to explain chemical bonding.
Resonance could be a manner of describing the bonding in particular molecules by contributory structures or forms, jointly known as canonical structures or resonance structures.
The methyl group in the toluene molecule is ortho and para-directing. Therefore, the reaction of chlorine with toluene will give two products o-chlorotoluene and p-chlorotoluene as shown in the attached diagram.
Learn more about resonance structure, here:
https://brainly.com/question/23287285
#SPJ1
What are amino acids and proteins known as?.
Answers
Amino acids and proteins are known as: Amino acids are molecules that integrate to form proteins.
A protein molecule is made from a protracted chain of those amino acids, every connected to its neighbor through a covalent peptide bond. Proteins are therefore additionally called polypeptides.
Amino acids, often known as the constructing blocks of proteins, are compounds that play many critical roles in your frame. You need them for vital techniques which include constructing proteins, hormones, and neurotransmitters.
An amino group is a nitrogen atom bonded to 2 hydrogen atoms. A molecule that consists of an amino purposeful institution is called an amine. Amino corporations are sometimes additionally referred to as amine corporations. Amino is a subcategory of amine.
Learn more about Amino acids here:
https://brainly.com/question/24106148
#SPJ4
How many grams of Na are in Na2O?.
Answers
Sodium oxide has a molar mass of 61.97 grammes per mole. Na has a molar mass of 22.9 grammes per mole.
Each element has a unique atomic mass. The atomic mass unit is u. (unified mass). The sum of the atomic masses of all atoms in a molecule, calculated on a scale with hydrogen, carbon, nitrogen, and oxygen atomic masses of 1, 12, 14, and 16, respectively. Water, for example, has a molecular mass of 18 (i.e., 2 + 16) because it contains two hydrogen atoms and one oxygen atom. Also known as molecular weight. similarly, sodium molar mass is 22.9gm/mole in sodium oxide. Molar mass is calculated using grammes per mole (g/mol). The molecular weight of a chemical compound tells us how many grammes there are in one mole of that substance. The formula weight is simply the weight of all the atoms in a given formula in atomic mass units
Learn more about Sodium here:
https://brainly.com/question/29327783
#SPJ4
A liquid can evaporate at any temperature, producing vapor above the surface of the liquid. This vapor exerts a pressure, which is called the ___________. This pressure increases as the temperature of the liquid increases. When this pressure equals the external pressure, the liquid has reached its ___________.vapor pressure; boiling point
Answers
A liquid can evaporate at any temperature producing vapor above the surface of the liquid. the vapor exerts a pressure which is called the vapor pressure. When pressure equals the external pressure, the liquid has reached its boiling point.
At a higher temperature, a greater fraction of molecules have enough energy to escape from the liquid. The escape of more molecules per unit of time and the greater average speed of the molecules that escape both contribute to the higher vapor pressure. As temperature increases, the vapor pressure also increases due to the increased average KE and it increases equal the external atmospheric pressure, it reaches its boiling point.
To learn more about Vapor pressure please visit:
https://brainly.com/question/4463307
#SPJ4
A carbon tax puts a price on _________________ so to accurately reflect the true cost of the production of that item to society; while a ____________ is set by a regulator that limits carbon emissions but allows polluters to buy and sell permits for those emissions.
Negative externalities; cap and trade system
Answers
A carbon tax puts a price on negative externalities so to accurately reflect the true cost of the production of that item to society; while a cap and trade system is set by a regulator that limits carbon emissions but allows polluters to buy and sell permits for those emissions.
Negative externalities can be described as a method by which the negative effects of a product affect the parties that are not involved in the consumption or usage of a product.
Under the cap and trade system, a cap or certain limit is decided for negative externalities such as carbon emission. By doing so, a carbon tax is imposed on the firms, companies, or organizations that emit carbon.
Under the cap and trade system, one has to buy permits for the amount of carbon that will be emitted by that particular factory.
To learn more about carbon tax, click here:
https://brainly.com/question/28188625
#SPJ4
Using carbon skeletal notation, write the dehydration-condensation reaction that occurs between ethanol and butanoic acid.
Answers
Ethyl butanoate is produced when butanoic acid and ethanol combine.
What ester does butanoic acid and ethanol make?When ethyl butanoate, with the chemical formula C6H12O2, and water are treated with butanoic acid, with the chemical formula C4H8O2 and carboxylic acid as functional groups, respectively, in the presence of an acid catalyst.Ethyl butanoate is produced when butanoic acid and ethanol combine. As per IUPAC regulations, the name of the alkyl chain that was the alcohol before to the reaction comes first when naming an ester. It is ethyl in this instance.The carbon skeletal notation for the given reaction is shown ( find the attachment)
To learn more about Ethyl butanoate refer,
https://brainly.com/question/25027021
#SPJ4
What are the 5 characteristics of covalent compounds?.
Answers
Characteristics of covalent compounds are
1. Covalent compounds can be found as soft solids, liquids, or gases.
2. Generally speaking, covalent compounds have low melting and boiling points.
3. Covalent compounds are soluble in organic solvents but insoluble in water.
4. They don't conduct electricity when they're solid, molten, or liquid.
What is Covalent bond ?A chemical bond known as a covalent bond involves the sharing of electrons between atoms to create electron pairs. These electron pairs are referred to as bonding pairs or shared pairs. Covalent bonding is the stable equilibrium of the forces that attract and repel atoms when they share electrons.
In a covalent bond, where the atoms share one or more pairs of valence electrons, a compound is created.Learn more about Covalent bond here:
https://brainly.com/question/3447218
#SPJ4
