Which force saves the atom by emitting particles from the nucleus

Answer:

The percent natural abundance is 27.95% for the heavier isotope (86.901 amu)

Explanation:

The atomic mass of Rubidium (Rb) is 85.468.

To find the percent natural abundance, first we need to use the following equation:

84.912x + 86.901(1-x) = 85.468

x represents the percent natural abundance, in basic decimal form

In order to find x, we will use the distributive property, combine like terms and then move the constant to the other side to get x.

We are first finding the percent natural abundance of the first isotope to make this easier for us.

84.912x + 86.901(1-x) = 85.468

-> 84.912x + 86.901- 86.901x = 85.468

-> 86.901 - 1.989x  = 85.458      (like terms were combined)

-> Subtract both sides by 86.901

-> Divide both sides by-1.989x

x = 0.720462544

Now turn this into a percent by multiplying by 100.

--> 72.05% for the first isotope (the one that contains 84.912 amu)

To find the natural abundance of the other isotope (the denser, heavier isotope), you could just subtract 72.05 from 100 to save time, but the usually desired way (the way that your teacher would probably want you to do) is down below:

We plug this decimal for the x-value into the parentheses from earlier:

(1 -x) ---> ( 1 - 0.720462544 ) = 0.279537456

Now we just need to convert this to a percent by multiplying by 100

0.279537456 * 100 = 27.95% of the heavier isotope (86.901 amu)

Answer:

Since a 1W appliance will use 1 joule of energy every second, a 1500W appliance will use 1500 joules of energy every second. Hence, it will use 90000 joules of energy per minute, 540000 joules per 6 minutes (per day), and 1620000 joules of energy across all 3 days.

TL;DR 1620000 joules of energy would be used.

Explanation:

Hope this helped!

Answer:

Radio waves are a type of electromagnetic radiation best-known for their use in communication technologies, such as television, mobile phones and radios.

Answer:

answer c

Explanation:

Answer:

4.226×10^8

Explanation:

4.2 ×10^8+2.6×10^6=422600000

or 4.226×10^8

The percent  by volume of a solution : 19.23%

Given

50 ml of ethanol

210  ml of water

Required

The percent  by volume of a solution

Solution

Percent Volume (% v/v) : volume (ml) of solute/100 ml of solution ⇒ ratio of the volume of the solute to total volume of the solution

[tex]\tt \%solute(v/v)=\dfrac{solute~volume}{solution~volume}\times 100\%[/tex]

solute= Ethanol

solvent=water

Solution = solute+solvent

Total volume of the solution :

[tex]\tt =volume~of~Ethanol+solume~of~water\\\\=50~ml+210~ml\\\\=260~ml[/tex]

Percent by volume :

[tex]\tt \%volume=\dfrac{50}{260}\times 100\%\\\\\%volume=19.23\%[/tex]

Answer:

1. D

2. A

3. B

4. A

5. BB

Explanation:

1d. 50%

2a. 29.5

3b. increasing

4a. decreasing

5b. waxing

Answer:

I think it's C

Explanation:

all the other ones are homogeneous because they are uniform and the same when mixed

a. lemonade is one color(yellow when mixed the same throughout)

b. omelet is scrambled together and the cheese and eggs melt together to be one

c.ice cubes and water are the same, both water

trail mix is the only different one made with different ingredients that standout

hetero- different (trail mix)

homo- same (lemonade)

Mass of copper : 0.165 g

Given

5.0 A over 100 seconds

Required

Mass of copper

Solution

Faraday's law:

The mass of the substance formed at each electrode is proportional to the electric current flowing in the electrolysis

[tex]\tt W=\dfrac{e.i.t}{96500}[/tex]

e = Ar / valence = eqivalent weight

i = current

t = time

W = weight

CuSO₄ ----> Cu²⁺ + SO₄²⁻

Cu ----> Cu²⁺ + 2e

e = Ar/2

= 63,5/2 = 31,75

[tex]\tt W=\dfrac{31.75\times 5\times 100}{96500}=0.165~g[/tex]

Answer:

D, the cardiovascular system

Explanation:

The Cardiovascular System is the system at which blood circulates through our body

Answer:

simplest explanation regarding CO2 Molecular Geometry and hybridization. ... Carbon is the least electronegative that means it stays at the center

Explanation:

hope this helps

Answer:

9.1% error

Explanation:

Full Question:

Answer:

There are different types of soil in the earth. Those different types of soil helps the earth stay healthy in many ways!! Just like the different layers in the earth. There are so many different layers in the earth so that the plants get the different nutrition they need. Not only that but it cleans the water that soaks in the ground.

There are 6 different types of soil, they are; sandy soil, clay soil, silt soil, peat soil, chalk soil, and loam soil.

Explanation:

Sandy soil

Sandy Soil is light, warm, dry and tend to be acidic and low in nutrients. Sandy soils are often known as light soils due to their high proportion of sand and little clay (clay weighs more than sand). These soils have quick water drainage and are easy to work with. They are quicker to warm up in spring than clay soils but tend to dry out in summer and suffer from low nutrients that are washed away by rain. The addition of organic matter can help give plants an additional boost of nutrients by improving the nutrient and water holding capacity of the soil.

Clay Soil

Clay Soil is a heavy soil type that benefits from high nutrients. Clay soils remain wet and cold in winter and dry out in summer. These soils are made of over 25 percent clay, and because of the spaces found between clay particles, clay soils hold a high amount of water. Because these soils drain slowly and take longer to warm up in summer, combined with drying out and cracking in summer, they can often test gardeners.

Silt Soil

Silt Soil is a light and moisture retentive soil type with a high fertility rating. As silt soils compromise of medium sized particles they are well drained and hold moisture well. As the particles are fine, they can be easily compacted and are prone to washing away with rain. By adding organic matter, the silt particles can be bound into more stable clumps.

Peat Soil

Peat soil is high in organic matter and retains a large amount of moisture. This type of soil is very rarely found in a garden and often imported into a garden to provide an optimum soil base for planting.

Chalk Soil

Chalk soil can be either light or heavy but always highly alkaline due to the calcium carbonate or lime within its structure. As these soils are alkaline they will not support the growth of ericaceous plants that require acidic soils to grow. If a chalky soil shows signs of visible white lumps then they can’t be acidified and gardeners should be resigned to only choose plants that prefer an alkaline soil.

Loam Soil

Loam soil is a mixture of sand, silt and clay that are combined to avoid the negative effects of each type. These soils are fertile, easy to work with and provide good drainage. Depending on their predominant composition they can be either sandy or clay loam. As the soils are a perfect balance of soil particles, they are considered to be a gardeners best friend, but still benefit from topping up with additional organic matter.

Those are the different types of soils with all of their many uses. I hope this helps!!!!! Have a wonderful day!!!

Answer:

3

Explanation:

Mass of Helium = 4

Helium = 55 liters

How many moles = ?

By the equation(AT S.T.P) of,

Moles = [tex]\frac{Given\ Volume}{22.4\ dm^3}[/tex]

Substitute the values,

Moles = [tex]\frac{55}{22.4}[/tex]

Simplify the fraction,

Moles = 2.5 grams/moles

Answer:

3000kg

Explanation:

Given parameters:

Speed = 20m/s

Kinetic energy  = 600000J

Unknown:

Mass  = ?

Solution:

Kinetic energy is the energy due to the motion of a body.

It is expressed as;

  K.E  = [tex]\frac{1}{2}[/tex] m v²  

m is the mass

v is the speed

  Now find m;

        600000 =  [tex]\frac{1}{2}[/tex]  x m x 20²

        600000 = 200m

         m  = 3000kg

Answer:

the answer is D: explanations of why the puck slides faster

Explanation:

A Girl in Brainly Banned/Removed the answer i had put the first time, Brainly claims she removed my answer because i was violating community guidelines such as cheating or plagiarism. The reason for putting my answer was because i took a test, i got it right and i want other people to take a test and get the answer right. Im trying to help:).

so katie if your reading this, try next time to mind your own business

Answer:d

Explanation:

Answer:

the molecules in the reactants interact to form new substances.

Explanation:

Answer:

D. Carbon​.

Explanation:

Carbon can be mixed with Many things. for example, YOU are mostly made out of carbon. Other things include furniture, clothing, plastics, charcoal, pencil led, diamonds, and gas.

Answer:

b                                 xplanation:

Answer:

-40J

Explanation:

E= -w+q

E= -75J+30J

E= -40J

Answer:

The theoretical yield of carbonic acid is 1.24 grams.

Explanation:

The balanced equation for the formation of carbonic acid by the reaction of carbon dioxide with water is:

CO₂ + H₂O → H₂CO₃

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of reactant and product participate:

An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:

P * V = n * R * T

Moles of carbon dioxide can be calculated using ideal gas law equation. In this case:

Replacing:

1 atm* 0.495 L= n* 0.082 [tex]\frac{atm*L}{mol*K}[/tex] *298 K

Solving:

[tex]n=\frac{1 atm*0.495 L}{0.082\frac{atm*L}{mol*K}*298 K }[/tex]

n= 0.02 moles

Then, by reaction stoichiometry 0.02 moles of carbon dioxide produces 0.02 moles of carbonic acid.

Since the molar mass of carbonic acid is 62.03 g/mol, then you can apply the following rule of three: if there are 62.03 grams in 1 mole, how much mass is there in 0.02 moles?

[tex]mass=\frac{0.02 moles*62.03 grams}{1 mole}[/tex]

mass= 1.24 grams

The theoretical yield of carbonic acid is 1.24 grams.

Answer:

12.044 ×10²³ molecules of HCl

Explanation:

Given data:

Number of moles of MgO = 1 mol

Number of molecules of HCl react = ?

Solution:

Chemical equation:

MgO + 2HCl       →     MgCl₂  + H₂O

with 1 mole of MgO 2 moles of HCl are react.

Number of molecules of HCl react:

1 mole contain 6.022×10²³ molecules

2 mol × 6.022×10²³ molecules / 1 mol

12.044 ×10²³ molecules

Answer:

0.59 g

Explanation:

The reaction at the first cathode;

Ag^+(aq) + e -----> Ag

if Q = It = 1.5 * 10 * 60 = 900C

According to Faraday's second law of electolysis; if we pass the same quantity of electricity through different electrolytes, the mass of substances deposited on each cathode is proportional to the equivalent weights.

Equivalent weight E = Atomic mass/valency

For Ag = 108/1 = 108

For Ni = 59/2 = 29.5

Hence

Let m1 = mass of Ag deposited =2.16

Let m2 = mass of Ni deposited

Let E1 = equivalent weight of Ag

Let E2 = equivalent weight of Ni

m1/m2 = E1/E2

2.16/m2 = 108/29.5

m2 = 2.16 * 29.5/108

m2 = 0.59 g

Answer:

true

Explanation:

Names for such acids consist of the prefix “hydro-“, the first syllable of the anion, and the suffix “-ic”. Complex acid compounds have oxygen in them. For an acid with a polyatomic ion, the suffix “-ate” from the ion is replaced with “-ic.”

I believe that the answer is C

We need to balance the equation

[tex]\sf \bullet\quad H_2 + O_2 \longrightarrow H_2O [/tex]

By adding 2 moles of [tex]\sf H_2 [/tex] on the both sides

[tex]\sf \bullet \quad 2H_2+O_2 \xrightarrow{\;By\:balancing\;} H_2O[/tex]

Hence, balanced !

Answer:

Here^

Explanation:

The matter starts heating, up as if it's ice , turns into a liquid.

Answer: x108(5.03x−42.6)

Explanation: Factor 5.03x109−42.6x108

5.03x109−42.6x108

=x108(5.03x−42.6)