The concept Le Chatelier's principle is used here to determine the increase in the concentration of Cl₂. Here on adding more amount of O₂, the amount of Cl₂ can be increased.
What is Le Chatelier's principle ?If a system in equilibrium is subjected to a change in concentration, pressure or temperature, the equilibrium shifts in the direction which tends to reduce the effect of the change. This is called the Le Chatelier's principle.
In chemical equilibrium, if the concentration of any one of the reacting species is increased, the equilibrium will shift in the forward direction and more products will be formed.
Thus here on adding O₂, the amount of Cl₂ produced will be more.
To know more about Le Chatelier's principle, visit;
https://brainly.com/question/18850227
#SPJ1
Answer:decrease the volume of the container
Explanation:Acellus confirmed
Which substance is most likely
to be corroded by a base?
An iron nail
A zinc statue
A leather saddle
A steel beam
Answer:
an iron nail
Explanation:
iron metal can be corroded in a basic medium,
so iron nail can be corroded by a base
Answer: A leather saddle
Explanation:
Draw a simple cell; indicate where the concentrations of Na+, K+, and Cl- are high and low and the electric potential difference across the membrane when the cell is at rest.
I won't ask you to draw something like this but it is good to know whether or not there is more Na+, K+ or CL-, inside or outside the cell. A = addition anions.
While at rest, a normal animal cell has a high concentration of K+ ions within and a high concentration of Na+ ions outside. Outside of the cell, there are also more Cl- ions present.
While at rest, a normal animal cell has a high concentration of K+ ions within and a high concentration of Na+ ions outside. Outside of the cell, there are also more Cl- ions present. As a result, the cell membrane experiences an electrical potential differential and concentration gradient. At a typical resting potential of -70 mV, the potential difference is negative inside the cell and positive outside the cell. This potential is kept constant and allows for cell processes like signalling and metabolism by the passage of ions across the membrane via ion channels and pumps. The total charge balance inside the cell is also influenced by other anions, such as proteins and phosphates.
Learn more about concentration of Na+ ions here:
https://brainly.com/question/12608621
#SPJ4
Which one of the following represents the reduced forms of the two major electron carriers? A. NADH and FAD B. NADH and FADH2 C. NAD+ and FAD
The two main electron carriers' reduced forms are represented by NADH and FADH2 in the list.
What are the names of the two main electron carriers in their reduced forms?The electron carrier is reduced to NADH, which is then changed into NAD+. The electron carrier becomes oxidized as a result of this reaction's first half. Lactic acid is produced during this process from pyruvate.
Which electron carriers are reduced?Reduced electron carriers FADH2 and NADH carry electrons into complexes I and II, respectively, of the electron transport chain. They undergo oxidation during the process, generating NAD+ and FAD. Flavoproteins, iron-sulfur clusters, quinones, and cytochromes are additional electron carriers in the electron transport chain.
To know more about electron visit :-
https://brainly.com/question/12001116
#SPJ4
what does °c mean? worth 5.000 points. a. degrees fahrenheit b. times, by c. and d. degrees celsius
°C is the symbol used for degrees Celsius, a unit of temperature in the metric system. Thus, option D is the answer.
°C is the symbol used to represent degrees Celsius, which is a unit of temperature in the metric system. It is named after the Swedish astronomer Anders Celsius, who first proposed the Celsius temperature scale in 1742.
The Celsius scale is based on the freezing and boiling points of water, with 0 °C being the temperature at which water freezes and 100 °C being the temperature at which water boils at standard atmospheric pressure.
The Celsius scale is widely used in scientific and engineering applications, as well as in everyday life, particularly in countries that use the metric system. It is an important measurement in areas such as weather forecasting, medicine, and industrial manufacturing.
Learn more about degrees Celsius:
https://brainly.com/question/25936097
#SPJ4
58. What is the approximate molecular weight of active Dnmt3a?
A. 35 kDa
B. 70 kDa
C. 105 kDa
D. 140 kDa
Option B, A catalytic domain of 35 kDa and a SET domain of 35 kDa make up the approximately 70 kDa molecular weight of active Dnmt3a.
The molecular mass of active Dnmt3a is around 70 kDa. The addition of methyl groups to DNA molecules is carried out by the DNA methyltransferase enzyme Dnmt3a. The inhibition of transposable elements is another potential role for it.
A catalytic domain and a SET domain make up Dnmt3a's two separate domains. A molecular weight of approximately 35 kDa distinguishes the SET domain from the catalytic domain. This results in an overall molecular weight for active Dnmt3a of 70 kDa.
Learn more about molecular weight at
https://brainly.com/question/27988184
#SPJ4
What type of structure is a fatty acid?
Fatty acids are organic molecules that consist of a long hydrocarbon chain and a carboxyl group (-COOH) at one end. They can exist in different forms, but their most common structure is a linear, unbranched chain of carbon atoms with hydrogen atoms attached to most of the carbons.
The carboxyl group at the end of the chain is polar and hydrophilic (water-loving), while the hydrocarbon chain is nonpolar and hydrophobic (water-fearing). This makes fatty acids amphipathic, meaning they have both hydrophilic and hydrophobic properties.
Fatty acids are the building blocks of many lipids, including fats, oils, and phospholipids. They play important roles in energy storage, membrane structure, and cellular signaling.
To know more about Fatty acids here
https://brainly.com/question/5710423
#SPJ4
What Is carboxylic acid used for?
Carboxylic acids are important chemical compounds with a wide range of uses in various industries like food, pharmaceutical, polymers , agriculture etc.
1. Food industry: Carboxylic acids, such as acetic acid and citric acid, are used as food additives to give foods and beverages a sour or acidic taste. Certain carboxylic acids, such as fatty acids, are employed as food preservatives as well.
2. Pharmaceutical industry: Carboxylic acids are utilized as starting materials in the production of a variety of medications, including aspirin (acetylsalicylic acid) and penicillin. They are also active chemicals in several topical skin treatments, such as salicylic acid for acne.
3. Carboxylic acids, such as acrylic acid, are utilized in the synthesis of polymers such as acrylic polymers and superabsorbent polymers, which have a variety of applications such as diapers, hygiene products, and coatings.
Learn more about carboxylic acid uses here:
https://brainly.com/question/29063860
#SPJ4
How does the number of groups help define the Electron geometry and the Molecular Geometry?
The Electron Pair Geometry and molecular geometry of a molecule is determined by the electron group by counting the total number of electron pairs around a central atom.
Electron Pair Geometry defined as the the spatial arrangement of a molecule's bonds and lone pairs. It is determined by the number of electron groups. Molecular geometry can be explained as the geometry which depends on not only on the number of electron groups but also on the number of lone pairs. When the electron groups are all bond pairs, they are named exactly like the electron pair geometry. The electron pairs are the bonded electrons, lone pairs and single unpaired electrons. It the total number of electron pairs is estimated the electron pair geometry of the molecule can be drawn.
To learn more about Electron Pair Geometry
https://brainly.com/question/1458198
#SPJ4
What can be used to measure molecular polarity?
a. x-rays
b. electron microscope
c. electric field
d. infrared light
Infrared light can be used to measure molecular polarity. Therefore, the correct option is option D.
A molecule or its chemical groups have an electric dipole moment with a negatively charged end and a positively charged end when they are polar, which in chemistry is the separation of electric charge. Because the bonded atoms' electronegativity differs, polar compounds must have one or more polar bonds. If the bond dipoles cancel one other out via symmetry, molecules with polar bonds are not polar. Infrared light can be used to measure molecular polarity. Dipole-dipole intermolecular forces and hydrogen bonding are how polar molecules communicate with one another. Many physical characteristics, including as surface tension, solubility, and melting and boiling points, are based on polarity.
Therefore, the correct option is option D.
To know more about molecular polarity, here:
https://brainly.com/question/30640129
#SPJ12
The system below was at equilibrium. The container is placed on a heating plate and warmed. What change will occur for the system?
look at the comment
The point of equilibrium will shift in a way that causes the temperature to decrease after you raise it. This will be accomplished by encouraging the process that absorbs heat.
What type of home heating is the least expensive?Despite recent significant price increases, central gas heating remains the most affordable method of heating a home. However, for many of us, heating with electricity is the only choice.
Which heating system is more typical?The most prevalent kind of house heating system is forced air distribution. They use a furnace with a blower fan that circulates heated, conditioned air through a system of ducts to the house's various rooms.
To know more about Heating visit:
https://brainly.com/question/30603212
#SPJ1
Which one of these categories is NOT classified as hazardous?
a. Corrosive
b. Toxic
c. Reactive
d. Annoying
The one that is not classified as the hazardous is the Annoying. The correct option is d.
There are the four types of the hazards : the chemical, the biological, the ergonomic, and the physical hazard. The hazardous wastes are the solid, liquid, or the gas wastes that are the toxic, the flammable, the corrosive, reactive, or the radioactive.
When the substance is used and will thrown away and it can be lead to the damage in the environment as it will produce the some toxic or the hazardous gases is known as the hazardous . These can be the solid, liquid or the gaseous.
To learn more about hazardous here
https://brainly.com/question/1373984
#SPJ4
how many grams of sulfur make up 1.55 mol of sulfur?
49.70075 grams of sulfur make up 1.55 mol of sulfur. Sulfur atoms have masses of 32.07 amu and 32.07 g per mole, respectively.
G/mol units are the starting point for calculating molar mass. We can find out how many grams make up one mole of a chemical molecule by computing its molecular weight. The weight of a particular formula is just the sum of the atomic masses of all the constituent parts.
The National Institute of Standards and Technology, or NIST, provided the atomic weights used on this website. We employ the most typical atoms. This is how isotropically weighted averages are used to determine the molar mass (average molecular weight). This differs from molecular mass, which is the weight of a singular molecule made up of distinct isotopes. For computations involving bulk stoichiometry, Typically, we are calculating molar mass, also known as normal atomic weight or average atomic masses.
1 gram of sulfur equals how many moles? 0.031186652112896 is the correct response.
It is assumed that you are changing between grams and moles of sulfur.
sulfur's chemical weight in grams
Sulfur's chemical formula is S.
The mole is the SI base measure for substance amount.
Sulfur has a molecular weight of 1 mole, or 32.065 grams.
Rounding errors could happen, so make sure to always double-check your findings.
To know more about atomic masses :
https://brainly.com/question/12231872
#SPJ4
Label the arterial vessels of the abdominal cavity. Celiac trunk Inferior mesenteric artery Left suprarenal artery Right common iliac artery Right ovarian/testicular artery Right renal artery Superior mesenteric artery Varicose veins are tunirah
Here's a list of the arterial vessels of the abdominal cavity you mentioned, along with a brief description of each. Check out the attached figure for a labelled diagram.
1. Celiac trunk: A short, wide artery that branches off the abdominal aorta and supplies blood to the stomach, liver, spleen, and other organs in the upper abdomen.
2. Superior mesenteric artery: An artery that arises from the abdominal aorta just below the celiac trunk and supplies blood to the small intestine, cecum, appendix, ascending colon, and transverse colon.
3. Inferior mesenteric artery: An artery that arises from the abdominal aorta just above the left common iliac artery and supplies blood to the descending colon, sigmoid colon, and rectum.
4. Right and left renal arteries: Arteries that branch off the abdominal aorta and supply blood to the right and left kidneys, respectively.
5. Right and left suprarenal arteries: Arteries that branch off the inferior phrenic arteries (which arise from the abdominal aorta) and supply blood to the right and left adrenal glands, respectively.
6. Right and left ovarian/testicular arteries: Arteries that arise from the abdominal aorta (males) or the internal iliac arteries (females) and supply blood to the right and left ovaries or testes, respectively.
7. Right and left common iliac arteries: Arteries that arise from the abdominal aorta and supply blood to the pelvic organs, gluteal region, and lower limbs.
Varicose veins, on the other hand, are dilated and twisted veins that often occur in the legs, although they can occur in other parts of the body as well. They are caused by weakened or damaged valves in the veins, which allow blood to pool and cause the veins to bulge. Varicose veins are not arteries, and they do not carry oxygenated blood from the heart.
Learn more about abdominal cavity here:
https://brainly.com/question/30323390
#SPJ4
what is the activation energy definition ?
The minimum amount of energy required for a chemical reaction to occur is known as activation energy. The energy barrier must be crossed for a reaction to progress from reactants to products.
In other words, it is the amount of energy required to break the bonds of the reactant molecules and form new bonds in order to form the product molecules.
On a reaction energy diagram, the activation energy is typically represented as a barrier, with the reactants on the left side, the products on the right side, and the activation energy barrier in between. The reaction rate is determined by the height of the activation energy barrier; the higher the barrier, the slower the reaction rate, and the lower the barrier, the faster the reaction rate.
In general, increasing the temperature, pressure, or concentration of reactants increases the probability that reactant molecules will have enough energy to overcome the activation energy barrier and undergo the reaction. Catalysts can also lower the activation energy barrier, allowing the reaction to happen faster and more efficiently.
For more question on activation energy click on
https://brainly.com/question/23134172
#SPJ4
Give the approximate bond angle for a molecule with a tetrahedral shape.A) 109.5°B) 180°C) 120°D) 105°E) 90°
The bond angle for a molecule with a tetrahedral shape is given as 109.5° C. Hence, the correct option is A.
Generally, bond angle is defined as the angle which is present between the two bonds i.e. angle between the two orbitals containing bonding electron pairs around the central atom in a complex molecule or ion. It is usually measured in the terms of degrees and is calculated using spectroscopic method.
Generally, the valence shell electron pair repulsion (VSEPR) theory is defined as a model used to predict 3-D molecular geometry based on the number of valence shell electron bond pairs among the atoms in a molecule or ion. This model usually assumes that the electron pairs will often arrange themselves in order to minimize the repulsion effects from one another.
Therefore, according to VSEPR Theory, the bond angle of a tetrahedral molecule is 109.5°. Hence, the correct option is A.
Learn more about VSEPR theory from the link given below.
https://brainly.com/question/14992767
#SPJ4
A balloon inflated in a room at 24 °C has a volume of 2.00 L. The balloon is then heated to a temperature of 88 °C. What is the volume of the balloon assuming the pressure remains constant?
Therefore, the volume of the balloon when heated to 88°C is 2.432 L.
What is volume?In the case of a gas, the volume is the amount of space that the gas occupies in a container. The volume of a gas can be affected by changes in pressure and temperature, as described by the ideal gas law. In this case, the volume is often expressed in terms of standard temperature and pressure (STP), which are defined as a temperature of 0°C and a pressure of 1 atmosphere (atm). In chemistry, volume is an important property for understanding the behavior of substances in chemical reactions. The volume of reactants and products can be used to determine the stoichiometry of a reaction, which is the relationship between the amounts of reactants and products in a chemical equation.
Here,
To solve this problem, we can use the ideal gas law, which states that:
PV = nRT
where P is the pressure of the gas, V is its volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature in Kelvin.
Since the pressure of the gas is assumed to remain constant, we can rearrange the ideal gas law to solve for V:
V1/T1 = V2/T2
where V1 is the initial volume of the balloon, T1 is the initial temperature in Kelvin (24°C = 297 K), V2 is the final volume we want to find, and T2 is the final temperature in Kelvin (88°C = 361 K).
Using this equation, we can plug in the given values and solve for V2:
V1/T1 = V2/T2
2.00 L / 297 K = V2 / 361 K
Multiplying both sides by 361 K, we get:
V2 = 2.00 L x (361 K / 297 K)
V2 = 2.00 L x 1.2162
V2 = 2.432 L
To know more about volume,
https://brainly.com/question/25252629
#SPJ1
what are the roles of hydrogen bonds and covalent bonds in the structure of dna?
Hydrogen bonds are responsible for base pair formation of in the DNA. Covalent bonds are found in each linear strand of the DNA double Helix.
The DNA double helix is held together by two types of bonds. Those are covalent and hydrogen. Covalent bonds occur within each linear strand of DNA. It strongly bond the bases, sugars, and phosphate groups that both within each component and between components. Hydrogen bonds occur between the two strands and involve a base from one strand with a base from the second in complementary pairing in the DNA. The hydrogen bonds are individually weak but quite strong together. A hydrogen bond donor includes the hydrogen atom and the atom to which it is most tightly linked with.
To learn more about DNA double helix please visit:
https://brainly.com/question/21148612
#SPJ4
Which two elements would NOT be capable of forming an ionicbond?a phosphorus and chlorineb barium and nitrogenc iodine and sodiumd. calcium and oxygen// NOT C//
d. calcium and oxygen would not be capable of forming an ionic bond. Ionic bonds form between elements with significantly different electronegativity values, where one element loses an electron and the other gains it.
Elements with similar electronegativity values would not be capable of forming an ionic bond. Option A, phosphorus and chlorine, and option B, barium and nitrogen, have significantly different electronegativity values and are capable of forming ionic bonds. Option C, iodine and sodium, can form an ionic bond since sodium is a metal and iodine is a nonmetal. Option D, calcium and oxygen, cannot form an ionic bond since both elements have similar electronegativity values and prefer to form covalent bonds.
Learn more about ionic bonds here: brainly.com/question/11527546
#SPJ4
Complete question:
Which two elements would NOT be capable of forming an ionic
bond?
a phosphorus and chlorine
b barium and nitrogen
c iodine and sodium
d. calcium and oxygen
When trimyristin is treated with NaOH and aqueous ethanol. the products formed are:
a. myristic acid and sodium chloride
b. sodium myristate, glycerol, and sodium chloride
c. sodium myristate and glycerol
d. myristic acid, gylcerol, and sodium chloride
e. sodium myristate only
When trimyristin is treated with NaOH and aqueous ethanol. the products formed are sodium myristate and glycerol. Thus, c is the correct option.
Triglycerides are tri-esters formed by the combination of a glycerol molecule with three molecules of fatty acids. It is an example of fat or lipid present in the human body and a good source of energy. 3 moles of myristic acid can be produced from one (1) mole of trimyristin.
Trimyristyin can be isolated from nutmeg by extraction, it is a triglyceride, it belongs to the organic compounds known as esters and it can be base hydrolyzed to produce fatty acid salts.
To learn more about trimyristin,
brainly.com/question/7292255
#SPJ4
tiana is a chemist who is making a chemical to add to swimming pools
Tiana is developing a chemical additive to be used in swimming pools.
What is chemical additive?Chemical additives are substances added to products to alter or improve their performance. They are used in a wide range of consumer products and industrial processes for a variety of purposes including improving shelf-life, enhancing flavor, or increasing the efficiency of a process. Common examples of chemical additives are preservatives, colorants, emulsifiers, antioxidants, stabilizers, and thickeners.
This additive is designed to help keep the pool clean and sanitary, by removing bacteria and other contaminants from the water. The additive is also designed to help balance the pH of the pool water, to ensure that it is safe for swimming and does not irritate swimmers' skin or eyes. The chemical additive must also be safe to use, and must not cause any adverse reactions in swimmers. Tiana's work involves testing different chemical compounds to find the most effective and safe additive for pool water.
To learn more about bacteria
https://brainly.com/question/30307005
#SPJ1
the attraction of a metallic cation for delocalized electrons is called?
Looking at the picture, how is it possible to determine the direction of blood flow from blood spatter?
It is possible to determine the direction of blood flow from blood spatter B. By looking at the shape of the drip and tail to see the possible direction.
How to determine the direction of blood flow?The shape of blood spatter can provide information about the direction and speed of blood flow, as well as the angle of impact, the type of weapon or force that caused the bloodshed, and other details about the crime scene.
One way to determine the direction of blood flow from a blood spatter pattern is to examine the shape of the spatter. Blood drops that are elongated or have a tail shape may indicate the direction of travel of the blood, since they tend to be stretched in the direction of motion.
Find out more on blood flow at https://brainly.com/question/5060885
#SPJ1
what mass of uranium contains the same number of atoms as 25.0 g of potassium (can you the work please)
Answer:
approximately equal to 152 grams of uranium
Explanation:
1. to find the number of atoms in 25.0 grams of potassium, we can find the number of moles of potassium in 25.0 g by dividing that by the molar mass (found on a standard IUPAC periodic table) and then multiply that by Avogadro's constant, the number of 'items' (molecules, atoms, ions, etc...), which is 6.022×10²³ to get the number of atoms in 25.0 g of potassium.
n(K) = m/M = 25.0/39.10 = 0.639386... mol of potassium.
N(K) = n×Nₐ = 0.639386...×6.022×10²³ = 3.85038...×10²³ atoms
2. In uranium, 3.85038...×10²³ atoms also equals 0.639386... moles. We can multiply this number by the molar mass of uranium (grams per mole), to get the mass of uranium.
m(U) = nM = 0.639386...×238.0 = 152.1738...
Therefore, the mass of uranium which contains the same number of atoms as 25.0 g of potassium ≈ 152 g
a 183 g 183 g sample of bleach contains 14.0 g naocl 14.0 g naocl . calculate the mass percent of naocl naocl in the bleach.
A 183 g sample of bleach contains 14.0 g NaOCl. 7.65% is the mass percent of NaOCl in the bleach.
What is mass percent?Mass percent is the means to indicate a concentration. Moreover, it defines the element in a certain composition. A mass percentage can be used to understand the solution's composition.
It displays the amount of solute in a certain amount of solution. The solute's concentration is specified in terms of mass or moles. It's possible to represent a degree using the mass percent. Also, it describes the element during a certain mixing.
mass percent = (solute mass / mass of solution)×100
mass percent = (14.0 / 183)×100 = 7.65%
Therefore, 7.65% is the mass percent of NaOCl in the bleach.
To learn more about mass percent, here:
https://brainly.com/question/14990953
#SPJ1
A mixture of 4.00 g of oxygen, 17.0 g of argon, and 35.0 g of carbon dioxide exert a pressure of 3.78 atm. What is the partial pressure of the argon in the mixture?
Therefore, the partial pressure of argon in the mixture is 1.195 atm.
What is pressure?Pressure is defined as the amount of force per unit area. It is a measure of how much force is distributed over a given surface area. Pressure can be represented by the symbol P and is typically measured in units such as Pascals (Pa), pounds per square inch (psi), or atmospheres (atm). Pressure is a fundamental concept in physics and is involved in a wide range of phenomena, from the behavior of fluids to the operation of mechanical devices. For example, when a force is applied to a gas, the gas molecules collide with the walls of the container and exert a pressure on the walls. This pressure is proportional to the number of gas molecules, the temperature of the gas, and the volume of the container.
Here,
The partial pressure of a gas in a mixture is the pressure that the gas would exert if it were the only gas present in the same volume and at the same temperature as the mixture. We can use the mole fraction of the gas to calculate its partial pressure in the mixture.
To calculate the mole fraction of argon, we need to find the total number of moles of gas in the mixture. We can do this by dividing the mass of each gas by its molar mass and then adding the results together:
moles of oxygen = 4.00 g / 32.00 g/mol = 0.125 mol
moles of argon = 17.0 g / 39.95 g/mol = 0.425 mol
moles of carbon dioxide = 35.0 g / 44.01 g/mol = 0.795 mol
total moles of gas = 0.125 mol + 0.425 mol + 0.795 mol = 1.345 mol
Next, we can calculate the mole fraction of argon:
mole fraction of argon = moles of argon / total moles of gas
mole fraction of argon = 0.425 mol / 1.345 mol = 0.316
The partial pressure of argon can now be calculated using the ideal gas law, where the partial pressure of argon (PAr) is the mole fraction of argon multiplied by the total pressure of the mixture (Ptotal):
PAr = XAr × Ptotal
where XAr is the mole fraction of argon.
Plugging in the given values, we get:
PAr = 0.316 × 3.78 atm = 1.195 atm
To know more about pressure,
https://brainly.com/question/18431008
#SPJ1
what is chlorine periodic table?
Chlorine is an atomic number 17 chemical element with the symbol Cl. It belongs to the halogen group and is found in the periodic table's third row, or period, and second column.
or group 17. (also known as the "halogen group" or "halogens"). Other elements in the halogen group include fluorine, bromine, iodine, and astatine, which have comparable chemical features such as strong electronegativity and reactivity. At room temperature, chlorine is a yellow-green gas that is a powerful oxidizing agent that may react with a wide range of other elements and compounds. It is frequently used in water treatment, disinfection, and the manufacturing of chemicals like as solvents, insecticides, and polymers.
learn more about chlorine here:
https://brainly.com/question/14962130
#SPJ4
dissolving a solute such as KOH in a solvent such as water results in A.) a decrease in the vapor pressure of the liquid B.) a decrease in the boiling point of the liquid C.) no change in the boiling point of the liquid D.) an increase in the melting point of the liquid
Potassium hydroxide, or KOH, is an inorganic substance.
To create a homogenous mixture, a solvent chemically dissolves with another component.The liquid's vapour pressure will decrease.
Because the equilibrium of a vapour above its liquid is represented by the vapour pressure of a liquid.
It is, in other words, the pressure of the vapour produced as a result of a liquid evaporating above a specific sample of the liquid in a closed container.
The temperature affects a liquid's vapour pressure in a closed container.
The vapor pressure of the solvent (above the resultant solution) is lower when a solute is added than the vapour pressure above the pure solvent.
To know more KOH about click here .
brainly.com/question/24279511
#SPJ4
True or False: colligative properties depend only on solute concentration; the identity of the solute is not important.
The colligative properties depend only on solute concentration; the identity of the solute is not important. It is true.
The colligative properties of a solution depend on the number of molecules or ions in the solute, not on the identity of solute. Osmotic pressure, boiling point elevation, freezing point depression, and vapor pressure depression are examples of ligand-like properties.
The total number of solute particles in a solution affects the colligative property of the solution. The chemical composition of the components has no effect on these properties. Therefore, the type of solvent has no effect on colligative power.
To know more about colligative properties, visit,
https://brainly.com/question/2930112#:~:text=Expert%2DVerified%20Answer&text=Colligative%20properties%20include%20relative%20lowering,freezing%20point%20and%20osmotic%20pressure.&text=C%3D%20concentration%20which%20depends%20on,solute%20irrespective%20of%20its%20identity.
#SPJ4
Do the fingerprints created by your gel electrophoresis provide conclusive evidence of who stole the vase? Explain.
Answer: Fingerprints are not conclusive evidence on their own.
Explanation:
The thief could have worn gloves and those fingerprints could belong to the owners. If the fingerprints don't match those of the owners', you would still need more evidence to prove that those belong to the killer, such as their whereabouts at the time the vase was stolen, motive, etc. Fingerprints are not conclusive evidence on their own.
Question 5
The atomic number of an element tells you the number of ______
o Electrons & neutrons
O Electrons & Proton
O Protons & Neutrons
The atomic number of an element tells you the number of Electrons & Proton
What is a proton?
A stable subatomic particle with the symbol P, H+, or 1H+, a proton has an electric charge of +1 e. Its mass is 1,836 times greater than that of an electron and only slightly less than that of a neutron. Nucleons are the collective name for protons and neutrons, which have masses of roughly one atomic mass unit apiece.
The positively charged particles called protons are found in the atom's nucleus. The strong force, which is stronger at short distances, pulls the protons together while the electromagnetic force pushes them apart.
Learn more about proton here:
https://brainly.com/question/1805828
#SPJ1
