Control chart diagramming tool can be used to determine the work process's accuracy.
What is Control chart ?The control chart is a graph used to study how a process changes over time. Data are plotted in time order. A control chart always has a central line for the average, an upper line for the upper control limit, and a lower line for the lower control limit. These lines are determined from historical data.
What are the main purposes of control charts?Control charts show if a process is in control or out of control. They show the variance (or variation) of process output over time. Control charts compare this variance against upper and lower limits to see if it fits within the expected, specific, predictable and normal variation levels.
To know more about control charts visit:
https://brainly.com/question/28022940
#SPJ4
the maximum nominal voltage permitted for a luminaire installed in a motel room is ? .
Thermal insulation may be provided in close contact with Type C components.
Thermal insulation is the answer. Insulation is the process of building a barrier between two objects to prevent heat transfer from one to the other by either reflecting thermal radiation or by limiting thermal conduction and convection. Wool, fiberglass, rock wool, polystyrene, polyurethane, goose feathers, and per lite are typical thermal insulators. These thermal insulation materials are true thermal insulators since they are very poor heat conductors. Insulation made of fiberglass. The most widely utilized insulation in recent times is fiberglass. Fiberglass is able to reduce heat transfer because of how it is created, which involves effectively weaving fine strands of glass into an insulation material.
Learn more about Thermal insulation here:
https://brainly.com/question/28489776
#SPJ4
Write a program that will input a list of test scores in from the keyboard. When the user enters -1, print the average. What do you need to be careful about when using -1 to stop a loop
A program that allows keyboard entry of a collection of test results. When the user types -1, the average is printed as 72.5.
What is a program, exactly?A program, often known as source code, is a group of instructions that tell the hardware of a computer how to do a task. As an example, users can create and compose documents using the word processor Microsoft Office applications.
Using the program: Why?Because of how automatic today's world is, machine learning is crucial. Humans must be in charge of the relationship between people and technologies. Due to the accuracy and efficiency with which computers and other machines can carry out tasks, humans are able to harness this power through the use of programming languages.
print("Enter the Scores:")
total = []
while True:
num = int(input())
if num == -1:
break
total. append(num)
print("The average is:",(sum(total)/len(total)))
To know more about program visit:
https://brainly.com/question/14368396
#SPJ4
A supplementary grounding electrode is required when the only grounding electrode available is ? NEC Reference?
A supplementary grounding electrode is required when the only grounding electrode available is a metal underground water pipe.
What is grounding electrode?A grounding electrode basically establishes a direct connection to the earth or ground by being conductive. A grounding electrode's direct contact with the ground is what matters. In spite of the fact that a structure contains many conductive items, not all of them directly connect to ground. The grounding electrode system here starts to take shape.
If any of the listed items are present, they must be used to create the grounding electrode system, according to the NEC, which contains a list of items that are allowed to be used as grounding electrodes. As permitted grounding electrodes, there are eight items listed in 250.52.
Learn more about grounding electrode
https://brainly.com/question/14612121
#SPJ4
The difference between the setpoint temperature and the conditioned temperature is known as
A. margin.
B. offset.
C. gap.
D. error.
Answer:offset
Explanation:
14. Which of the following statements correctly defines balance point temperature?
A. The inside temperature at which cooling is required
B. The outside temperature at which point ventilation isn't required
C. The outside temperature at which point heat loss from the building equals internal heat gain
D. The inside temperature at which point backup heat comes on
Answer:
C. The outside temperature at which point heat loss from the building equals internal heat gain
Explanation:
The balance point temperature (also known as "balance temperature" or "neutral temperature") is the outside temperature at which the heat loss from a building equals the internal heat gain. At this point, no heating or cooling is required to maintain a comfortable indoor temperature. The balance point temperature is used in building design and HVAC system design to determine the appropriate size and type of heating and cooling equipment needed for a building.
a ? typically consists of a conductive link or links encapsulated in a tube for physical protection, which is packed with fine granulated filler (such as silica sand) and has a means for making electrical and mechanical connections when installed (typically either ferrule end caps or blades).
Unconsolidated sediments are frequently at their strongest when they are moist as a result of surface tension that is brought on by the little volumes of water around grain boundaries. Surface tension
Who doesn't respect boundaries?People with inadequate boundaries tend to fall into one of two categories: those who assume excessive responsibility for the feelings or actions of others and some who demand excessive responsibility from others.
Positive boundaries: what are they?being able to refuse requests and take rejection from others being able to express demands and wants clearly. recognizing and honoring their own needs as well as those of others. esteeming other people's values, views, and viewpoints despite the fact that they differ from one's
To know more about boundaries visit:
https://brainly.com/question/28924114
#SPJ4
rope that is used exclusively for utility rope and is susceptible to abrasion and damage because a large portion of the load-bearing strands are exposed is known as:
Laid rope is rope that is only used for utilitarian purposes and is vulnerable to wear and breakage because a significant amount of the pile strands are exposed.
What rope is the strongest?Nylon is the preferred rope due to its outstanding strength and exceptional stretching properties. Nylon, which is more durable than either of the manila and polypropylene, is frequently used to draw the largest weights and support the most weight.
What rope is the softest?Since cotton is the smoothest of all fibers, it is perfect for use when rope wear is a concern. It is perfect for a wide range of tasks thanks to its softness, especially for things like handrail décor.
To know more about rope visit:
https://brainly.com/question/28928264
#SPJ4
Which part should be tested? O Flame sensorO Expansion valve O Solenoid valve O Gas valve
The correct response is a. Flame sensor. Flame sensor should be tested.
The flame sensor, which is a brief, thin metallic rod, generates a modest electrical current to signal whether a flame is burning inside the furnace. The current moves from the sensor to detect the heat from a flame as the gas valve opens to initiate combustion. An essential safety component of your gas heating system is a flame sensor. Your gas furnace will really ignite the gas during the ignition cycle using a spark or a hot surface ignitor. A current of electricity is produced by the flame sensor as the gas is ignited. If your furnace doesn't have a flame sensor, it will continue to release gas even when nothing is there to ignite it, which can lead to dangerous gas accumulation.
Learn more about sensor here
https://brainly.com/question/28068549
#SPJ4
A technician configures a new printer to be accessible via a print server. After setting up the printer on a Windows client machine, the printer prints normally. However, after setting up the printer on a macOS client machine, the printer only prints garbled text. Which of the following should the technician do to resolve this issue
The technician should add a macOS-compatible print driver to the printer object on the print server to resolve the issue. The correct option is A.
What is a device driver?In computing, a device driver is a piece of software that administers or regulates a specific type of device that is connected to a computer or automaton.
Every piece of hardware, from internal computer components like your graphics card to external peripherals like a printer, requires a driver.
Therefore, the correct option is A. Add a macOS-compatible print driver to the printer object on the print server.
To learn more about device driver, refer to the link:
https://brainly.com/question/15637359
#SPJ1
The question is incomplete. Your most probably complete question is given below:
A. Add a macOS-compatible print driver to the printer object on the print server
B. Configure the Windows client to share the printer with the macOS client
C. Set the printer on the macOS client to connect to the print server via IPv6
D. Ensure the network time of the macOS client matches that of the print server.
A temporary work platform will be used on a construction project to support personnel, materials, and equipment. The figures on the next page shows the design of the platform. The platform loading and design are as follows: g
A temporary work platform is a structure used to provide a safe, stable surface for personnel, materials, and equipment on a construction project.
The design of the platform should be able to support the specified load and meet any applicable construction codes and regulations. The platform shown in the figures has a length of 10 feet, a width of 6 feet, and a height of 6 feet. The platform is designed to support a live load of 400 pounds per square foot and a concentrated load of 1,500 pounds.
The platform should also be able to support any dynamic loading, such as vibration or shock loads, that may occur due to the use of machinery or other activities on the platform. The platform should also be designed to meet any wind or seismic loads that may be applicable to the project site. To ensure the safety of personnel, materials, and equipment on the platform, it is important to follow good engineering practices when designing the platform.
Learn more about temporary work platform:
https://brainly.com/question/2966642
#SPJ4
Explain 5 consequences of using wrong tool for winding
Answer:
1. Poor Productivity
2. Hazardous Job Sites
3. Wasted Money
4. Inability to Scale
5. Damaged Professional Reputation.
Hope this helps - Please mark as Brainliest
You have been hired by a homeowner to install a ceiling fan and light kit in a living room. The living room luminaire (light fixture) being used at the present time contains two 60-W lamps. After locating the circuit in the panel box, you find that the circuit is protected by a 15-A circuit breaker and is run with 2.5mm² copper wire. After turning on all lights connected to this circuit, you have a current draw of 8.6 A and a voltage of 120V. The ceiling fan light kit contains four 60-W lamps, and the fan has a maximum current draw of 1.6 A. Can this fan be connected to the existing living room circuit? Recall that a continuous-use circuit should not be loaded to more than 80% of its rated capacity.
Answer:
No, you cannot add the ceiling fan to the circuit.
Explanation:
120V/60W=0.5A (V/W=A)
0.5A*4=2A (you have 4 60W lamps)
2A+1.6A=3.6A
3.6Ax0.125=0.45A (continuous load appliances must have amperage rated at 125% according to USA NFPA 70)
0.45A+3.6A=4.05A
4.05A+8.6A=12.65A
Assuming all devices on the circuit are ON, there would be a total current draw of 12.65A (after adding the ceiling fan). 80% of 15A is 12A.
Refer to the graphic. What type of cabling is shown? a. STP b. UTP c. Coax d. Fiber
STP cable employs four of wires, each of which is shielded with foil and then covered with a metal braid or foil overall.
What kind of cable is UTP?Unshielded twisted-pair cable is known as UTP. A 100 ohm cable called a UTP cable has 2 to 1800 coaxial cables pairs that are encased in an outer jacket. They don't have a metal shield. As a result, the wire has a small diameter yet is not shielded from electrical interference.
UTP or FTP, which is preferable?For instance, Unshielded twisted - pair (unshielded twisted pair cables can be a good choice if you intend to install Network cable in your home. But if you wish to use other Gigabit Ethernet and PoE (Power through Ethernet) applications.
To know more about UTP visit:
https://brainly.com/question/29755958
#SPJ4
Tech A says that after an accident you should take measures to avoid it in the future. Tech B says that it is okay to block an exit for a shop if you are actively working. Who is correct
Technician A is the appropriate response based on the information provided in the question.
How would you define measures?the quantity or size of something as determined by measurement. use equal amounts of the ingredients.: a yardstick, cup, or other measuring device.: a measurement unit. A foot is used to measure length.
What are basic steps?The measurement that just employs one kind of unit is considered to be simple. minutes and hours. For instance, to convert 2 hours, 23 minutes, and 12 seconds to seconds, we must first get all 3 parameters in seconds using the conversion factors, then add them.
To know more about measure visit:
https://brainly.com/question/28334506
#SPJ4
The 25-kg bar has a center of mass at G. If it is supported by a smooth peg at C, a roller at A, and cord AB, determine the reactions at these supports.
A fixed support that is to a structure restricts all rotations and movements at that location.
There are six support responses applied from the fixed support to the structure since the joint with fixed support has no degrees of freedom. R (externally independent) (externally independent) Support for a There are three possible reactions at a engine. The term "ball and socket joint" is another name for the support. A built structure is often connected to its base using one of three basic types of connections: roller, pinned, and fixed. A simple support is a fourth form that is uncommon in building constructions. This is frequently as having no friction.
Learn more about engine here-
https://brainly.com/question/27162243
#SPJ4
#A certain CS professor gives 5-point quizzes that are graded on the scale
#5-A, 4-B, 3-C, 2-D, 1-F, 0-F. Wirte a program that accepts a quiz score
#as an input and prints out the corresponding grade.
def main():
grade = eval(input("What is your quiz score? (Type quit to stop) "))
if grade == 5:
letter = 'A'
if grade == 4:
letter = 'B'
if grade == 3:
letter = 'C'
if grade == 2:
letter = 'D'
if grade == 1 or grade == 0:
letter = 'F'
print(" Your grade is a ", letter)
main()
Cascade Connection of Two Integrating Amplifiers
Answer:
A Ethos
B Pathos
C Shift
D Understatement
D Overstatement
i need help on this whole set, thanks
Find the size of angle xyz. Give your answer to 1 decimal place. Z 15 cm x 6 cm y.
Applying trigonometry ratio, the measure of angle XYZ in triangle XYZ, to 1 decimal place is 66.4°.
What is trigonometry ratio?Trigonometric ratios are the ratios of a right triangle's sides. The sine (sin), cosine (cos), and tangent are three often used trigonometric ratios (tan).The term "sohcahtoa" aids in recalling the meanings of sine, cosine, and tangent.Check your understanding of the six trigonometric ratios: sine, cosine, tangent, cotangent, secant, and cosecant.Instance 1 Find the trigonometric ratios tan, sin, and cos in the right-angled triangle ABC, where the right angle at B is, and if ACB =. Hypotenuse AC = 10, base BC = 8, and perpendicular AB = 6. The correct answer is that the triangle's sin, cos, and tan values are 3/5, 4/5, and 3/4, respectively.Given data :
angle XYZ = Ф
Hypotenuse = 15 cm
Adjacent = 6 cm
The trigonometry ratio we would apply is CAH. Which is:
CosФ = Adjacent / Hypotenuse
CosФ = 6 / 15 = 0.4
Ф = [tex]CosФ^{-1}[/tex] ( 6 / 15 )
Ф = 66.4°
Therefore, applying trigonometry ratio, the measure of angle XYZ in triangle XYZ, to 1 decimal place is 66.4°.
Learn more about trigonometry ratio refer to :
https://brainly.com/question/24349828
#SPJ1
Problem 5.1Vectors: FA ,Bx, ByPart A Draw the free-body diagram for the cantilevered beam. A is the a fixed support.Draw the vectors starting at the black dots. The location and orientation of the vectors will be graded. The length of the vectors will not be graded. Double-click on the black dot to indicate the direction of the moment. To change the direction click on the dot one more time.add elementv vector sum delete element attributes 5 reset ? help 6 kN 30° 1.5 m 4 kN -1.5 m→トー1.5 m
Starting with the black dots, draw the vectors. The vectors' position and orientation will be rated. The vectors' lengths won't be graded.
What exactly is a cantilevered building?A projecting volume or girder that is joined to a building at just one end is called a cantilever. Although they have been extensively utilized in bridge design for many years, they are still used in a variety of ways in modern structures.
How do cantilever walls work?Reinforced concrete is used to construct cantilever walls, and an L-shaped (or inverted T-shaped) foundation is used. By transferring the vertical tension behind the wall onto the foundation, the toppling caused by earth pressure lateral generated by the same soil mass is avoided.
To know more about cantilevered visit:
https://brainly.com/question/13254986
#SPJ4
PLTW 1.3.4 Conclusion questions:
1) If you plan to pattern a feature, such as a square hole cut into a solid or a solid extrusion, is it more efficient to pattern the sketch before you extrude or to pattern the final feature after you extrude? Justify your answer.
2) Look around your classroom and think about items in your possession. List at least two objects that could not be modeled efficiently using a straight extrusion but would more efficiently be modeled using a Loft feature. How about objects that could be modeled using a tapered extrusion?
It is more efficient to pattern the sketch before you extrude. This is because when a sketch is patterned before it is extruded, the pattern is created based on the original sketch and the software automatically updates the final feature. If the pattern is applied after the extrusion, the software would have to pattern each individual feature, which would take more time and potentially lead to errors.
2. Two objects that could not be modeled efficiently using a straight extrusion but would more efficiently be modeled using a Loft feature are:
A vase with a tapered shape that widens at the top and narrows at the bottom.A lampshade with a curved shape that flares out at the bottom and narrows at the top.What is the object about?By patterning the sketch before extruding, the software can quickly and easily apply the pattern to the final feature.
Objects that could be modeled using a tapered extrusion are:
A bottle with a tapered shape that widens at the bottom and narrows at the top.A pencil with a tapered shape that widens at the top and narrows at the bottom.Therefore, In both cases, the tapered extrusion feature allows for easy creation of tapered shapes, which would be more difficult to model using other features such as straight extrusions or lofts.
Learn more about pattern from
https://brainly.com/question/28580633
#SPJ1
Please help me solve the assignment
In this instance, interleaving refers to the system performing a single physical memory access while utilising more than one memory bank.
What is memory bank?For storing and retrieving frequently used data, a memory bank is a logical storage area within computer memory. For quick access to and retrieval of programs and common data, it may be a component of regular RAM or the cache memory. Bank switching is a mechanism that sets up the memory that the CPU can access at any given time. Since the MOS 6510 CPU can only access 216 = 65536 memory addresses ($0000-$FFFF), banks of memory can be switched (which makes them visible or invisible to the CPU) to increase total capacity. The data memory address bus is 12 bits, and it can address up to 4 MB of memory. Each bank in the RAM has 256 bytes and there are 16 of them overall.To learn more memory bank refer to:
https://brainly.com/question/13911669
#SPJ1
Electric heating equipment is typically.A.) Less expensive to purchase and less expensive to operate than fossil fuel heating equipment.
B.) More expensive to purchase and more expensive to operate than fossil fuel heating equipment.
C.) More expensive to purchase and less expensive to operate than fossil fuel heating equipment.
D.) Less Expensive to purchase and more expensive to operate than fossil fuel heating equipment.
Usually, electric heaters are used. Compared to fossil fuel heating equipment, it is more affordable to buy but more expensive to run.
Any type of biologically derived hydrocarbon-containing fuel that is found in the Earth's crust and can be used as an energy source is referred to as a fossil fuel.
Oil shales, bitumen, tar sands, and heavy oils are examples of fossil fuels along with coal, petroleum, natural gas, and petroleum. All of them include carbon and were created by geologic processes acting on the remains of organic matter produced by photosynthesis, a process that started in the Archean Eon (4.0 billion to 2.5 billion years ago). Before the Devonian Period (419.2 to 358.9 million years ago), the majority of carbonaceous material came from bacteria and algae, but the majority of carbonaceous material that formed during and after that time came from plants.
Learn more about fossil fuel here:
https://brainly.com/question/29608326
#SPJ4
You want to implement a fault tolerance topology as you connect routers on your wide area network. Which of the following topologies meet your needs ?
Redundancy for a broken link is provided via mesh network topologies. Network topology can be used to define or describe a variety of telecommunication networks
The topology of a communication network describes how its elements are set up. Network topology can be used to define or describe a variety of telecommunication networks, including industrial fieldbuses, computer networks, and command and control radio networks. Studying network topology allows one to recognize the eight basic topologies that include point-to-point, bus, star, ring or circular, mesh, tree, hybrid, and daisy chain. The star, mesh, tree, ring, point-to-point, circular, hybrid, and bus topologies are a few examples of physical network topologies. These networks are made up of various configurations of nodes and linkages. Studying network topology allows one to recognize the eight basic topologies which include point-to-point, bus, star, ring or circular, mesh, tree, hybrid, and daisy chain.
Learn more about Network topology here:
https://brainly.com/question/29743051
#SPJ4
Calculate the polar radius of gyration of the shaded area about its centroid C. Assume t = 130 mm, a = 465 mm, b = 565 mm ko = ... mm
The shaded area's polar radius of gyration around its centroid C. Assume t = 130 mm, a = 465 mm, b = 565 mm ko = 253 mm.
The difference between the area of the complete polygon and the area of the unshaded portion inside the polygon is the area of the shaded region. There are two methods for the area of the shaded component to appear in polygons. The darkened area can be found either in the polygon's centre or on one of its sides. You might occasionally be necessary to determine the size of shaded areas. The area of the shaded zone is often calculated by deducting the area of a smaller inner form from the area of a larger outer shape. "Sector" of a circle is represented by the darkened area. A sector is the area of a circle that is bounded by two radii and an arc.
Learn more about shaded area here
https://brainly.com/question/13515841
#SPJ4
Consider the external ports for a typical PC system (pictured below). Drag the port type on the left to the letter on the right that best identifies it. (Each type can be used once.)
Thunderbolt, A-HDMI, B-IEEE 1394, C-USB, E-VGA, F-DVI, G-RJ45, H-RJ11, I-Fiber, S/PDIF, and J-Audio Jack.
There are three distinct types of expansion slots shown in this image: PCI Express, PCI, and AGP. PCI Express: Also known as PCIe, PCI Express is the ideal sort of expansion slot to have in your computer. A USB port is used to connect a wired mouse to a contemporary computer. In light of this, a modern PC uses the USB port on its back to connect a mouse, making USB the right response. Signals for visual and audio can be sent via DisplayPort over the same connection.
To learn more about Thunderbolt click the link below:
brainly.com/question/28858886
#SPJ4
7) The heat from students, from lights, through the walls, and so forth to the air moving through a classroom is 18000 kJ/hr. Air is supplied to the room from the air conditioner at 17C. The air leaves the room at 27C. Determine the following: (a) Air mass flow rate (kg/s), (b) Air volumetric flow rate m3/hr at inlet conditions (c) Duct diameter (m) for an air velocity of 3 m/s.
The mass flow rate is 1791.04 kg/s, the air volumetric flow rate is 1462.1 m^3/hr and the duct diameter is 24.91m
a) 1791.04 kg/s
b) 1462.1 m^3/hr
c) 24.91 m
What is Air flow rateAir flow rate refers to the amount of air that is moving through a given area in a specific period of time. It is typically measured in units of volume per unit of time, such as cubic feet per minute (cfm) or cubic meters per hour (m³/hr).
a) To determine the air mass flow rate, we need to know the heat load of the room and the specific heat of air. The heat load is given as 18000 kJ/hr. The specific heat of air is approximately 1.005 kJ/kg·K. To calculate the air mass flow rate, we use the equation:
mass flow rate = heat load / (specific heat x temperature difference)
mass flow rate = 18000 / (1.005 x (27 - 17)) = 18000 / (1.005 x 10) = 1791.04 kg/s
b) To determine the air volumetric flow rate at inlet conditions, we need to know the density of air at 17 °C. The density of air at 17°C is approximately 1.225 kg/m^3. To calculate the air volumetric flow rate, we use the equation:
volumetric flow rate = mass flow rate / density
volumetric flow rate = 1755.37 / 1.225 = 1462.1 m^3/hr
c) To determine the duct diameter for an air velocity of 3 m/s, we need to know the volumetric flow rate, the air velocity and the cross-sectional area of the duct. To calculate the cross-sectional area of the duct, we use the equation:
volumetric flow rate = air velocity x area
Area = volumetric flow rate / air velocity
Area = 1462.1 / 3 = 487.37m^2
To find the diameter of the duct we use the equation
D = 2 * (Area / π)^(1/2)
D = 2 * (487.37 / π)^(1/2) = 24.91m
Therefore, the duct diameter is 24.91 m
Note: These calculations are based on ideal gas laws, Also the density and specific heat of air changes based on temperature and pressure also the velocity also depends on the friction loss in the duct and the air pressure, these calculations are just an approximation.
Learn more on air flow rate here;
https://brainly.com/question/15729967
#SPJ1
what polarity must be connected to the collector, base, and emitter of an npn to make it forward biased?
A positive voltage must be applied to the PNP's emitter, and a negative voltage must be connected to its collector. To forward bias the transistor, the base must be linked to the same polarity as the collector.
For the transistor to operate in the active state, the emitter base junction must be forward biassed and the collector base junction must be reversed biassed. Since the first junction is forwardly biassed, the bulk of the current flows through it and travels to the base, while the second junction needs to be reversely biassed in order to reach the collector. the junction that is forward-biased in an NPN transistor. Electrons leave the negative terminal of the battery and enter the N material as the emitter-to-base junction is biassed forward in the figure (emitter). When the transistor's base collector and emitter base junctions are both forward biassed, the area is said to be saturated.
To learn more about PNP's emitter click the link below:
brainly.com/question/10765323
#SPJ4
Determine the stratospheric ozone formation
The formation of stratospheric ozone (O3) occurs primarily through a series of chemical reactions involving ultraviolet (UV) radiation and several key atmospheric gases. The primary reaction involved in ozone formation is the conversion of oxygen molecules (O2) into ozone molecules (O3) through the following reaction:
O2 + UV radiation -> 2 O
2 O + O2 -> 2 O3
The first step of the reaction, the dissociation of O2 by UV radiation, creates two highly reactive oxygen atoms (O). These oxygen atoms then quickly react with another O2 molecule, forming an ozone molecule (O3).
Another important reaction that contributes to ozone formation is the conversion of methane (CH4) and other hydrocarbons into water vapor (H2O) and carbon dioxide (CO2), which release atomic oxygen (O) as a byproduct:
CH4 + 2 O2 -> CO2 + 2 H2O + O
The atomic oxygen produced in this reaction can also react with O2 to form ozone.
Additionally, several other chemical reactions also contribute to ozone formation. For example, nitric oxide (NO) can react with atomic oxygen to form NO2 which again can react with more atomic oxygen to produce ozone. Also, chlorine, bromine and iodine compounds can catalyze the breakdown of ozone, particularly in the Antarctic stratosphere, releasing chlorine and bromine atoms that can destroy many ozone molecules.
What does XML use to describe data?
Group of answer choices
Script-language
Code editor
A plugin
Customized tags
The correct answer is Customized tags does XML use to describe data.Browse gift tag templates for every topic if you don't want to start from scratch.
XML employs tags, just as HTML, to define content. However, the tags in XML explain the meaning and hierarchical structure of data rather than concentrating on the presentation of content. Page writers employ custom tags, which have XML syntax. This general phrase refers to the collection of classes and standards that enable programmers to design unique actions and tags for JSP. Opening tags, closing tags, and empty tags are the three types of tags found in XML. Angle brackets are used to encapsulate XML tag names, and case matters.
To learn more about Customized tags click the link below:
brainly.com/question/14312906
#SPJ4
