why are temperatures more moderate around the fall and spring equinoxes? the angle at which earth’s axis tilts changes. neither end of earth’s axis is tilted toward the sun. the north end of earth’s axis is tilted toward the sun. the earth briefly wobbles on its axis.

Answers

Answer 1

Temperatures are more moderate around the fall and spring equinoxes because the angle at which Earth's axis tilts changes.

The seasonal contrast increases as the axial tilt increases, as a result, the summers get warmer and winters get colder in both hemispheres. It is also responsible for the different seasons that the Earth witnesses.

During the fall and spring, the Earth leans neither away nor towards the sun, nighttime and daylight hours are equal, and exigencies moderate temperature.

The temperature of Earth depends on the Sun, the cooler the hotter, that's why people experience different weather and season on Earth.

Learn more about Earth:

https://brainly.com/question/10294427

#SPJ4


Related Questions

This question is about the Geologic Time Scale. Let's say that I am standing in front of a rock formation with rock strata that were formed in the Mesozoic Era and l'm curious if the rock formation also includes rock strata from the Cenozoic Era. Where should I be looking? Above the rock strata of the Mesozoic Era Below the rock strata of the Mesozoic Era

Answers

During the Mesozoic Era, which is also known as the Age of Reptiles, the Earth's climate was much warmer and drier than it is today, and many different types of reptiles, such as dinosaurs, lived on the planet. The rock strata from this time period are typically composed of sedimentary rocks, such as sandstone, limestone, and shale, which were formed by the accumulation of these sediments over millions of years.

On the other hand, the Cenozoic Era, which began after the Mesozoic Era and continues to the present day, is characterized by the presence of more diverse and complex ecosystems, including mammals, birds, and other types of animals. The rock strata from this time period are typically composed of sedimentary rocks, as well as volcanic rocks, such as basalt and andesite, which were formed by the eruption of volcanoes.

In order to determine if the rock formation includes rock strata from the Cenozoic Era, you should look for evidence of these types of rocks, such as fossils or volcanic rocks, above the rock strata of the Mesozoic Era. If you do not see any evidence of these types of rocks, it is likely that the rock formation does not include rock strata from the Cenozoic Era.

Learn more about Cenozoic Era

https://brainly.com/question/24401277

#SPJ11

Mafic igneous rocks get their dark color from what elements? CHOOSE THE TWO CORRECT ANSWERS Iron Silicon Silver Magnesium Carbon Question 5 4 pts Name two types of soil deposits (as classified by geotechnical engineers) \& how they are formed. In engineering, the mineral grains found in soil are called clays silts aggregates cells Question 7 1 pts Which sedimentary rock type is composed of deceased organisms? detrital chemical organic

Answers

The sedimentary rock type composed of deceased organisms is organic sedimentary rock.

Organic sedimentary rocks are formed from the accumulation and compaction of organic materials like dead plants and animals.

Examples of organic sedimentary rocks include coal and limestone.

Mafic igneous rocks get their dark color from two elements: iron and magnesium.

These elements are responsible for the formation of minerals like olivine and pyroxene, which give the rocks their dark color.

Now, moving on to the second question, there are two types of soil deposits classified by geotechnical engineers.

The first type is clays, which are formed from the weathering and decomposition of rocks rich in minerals like feldspar and mica.

Clays have very fine particles and are known for their ability to retain water.

The second type is silts, which are formed by the deposition of fine particles like silt-sized quartz and clay minerals.

Silts have slightly larger particle sizes compared to clays and have good water-draining properties.

Finally, the sedimentary rock type composed of deceased organisms is organic sedimentary rock.

Organic sedimentary rocks are formed from the accumulation and compaction of organic materials like dead plants and animals.

Examples of organic sedimentary rocks include coal and limestone.

Learn more about sedimentary rock from this link:

https://brainly.com/question/28730348

#SPJ11

You have just finished running a geoprocessing tool, but you want to run it a second time using different variables. which method is the most efficient?

Answers

When running a geoprocessing tool and wanting to rerun it using different variables, the most efficient method would be to use a Python script. Python scripts are easy to modify and rerun with different variables without having to go through the entire process of reopening the geoprocessing tool each time.

When running a geoprocessing tool and wanting to rerun it using different variables, the most efficient method would be to use a Python script. Python scripts are easy to modify and rerun with different variables without having to go through the entire process of reopening the geoprocessing tool each time.When using a Python script to rerun the geoprocessing tool with different variables, the user should define and set the variables beforehand. The variables can be set using either a Python IDE or the Python window in ArcMap. Once the variables are set, they can be easily modified for future reruns of the geoprocessing tool, without the need to go through the entire geoprocessing tool again. In this way, the Python script is more efficient as compared to reopening the geoprocessing tool each time the variables are changed.In conclusion, using a Python script is the most efficient method for rerunning a geoprocessing tool with different variables. The user needs to define and set the variables beforehand, and the variables can be easily modified for future reruns without the need to go through the entire geoprocessing tool each time. The Python script is thus a time-saving and efficient way to rerun a geoprocessing tool. The answer should be more than 100 words.

To know more about Python visit:

https://brainly.com/question/30391554

#SPJ11

According to robert christgau, chuck berry is the greatest of all rock and rollers. True or false

Answers

According to Robert Christgau, chuck berry is the greatest of all rock and rollers. Thus, the given statement is true.

According to Robert Christgau, Chuck Berry is heralded as the greatest of all rock and rollers. Christgau, a renowned music critic, has expressed his admiration for Berry's immense influence and pioneering contributions to the genre. Berry's innovative guitar riffs, energetic performances, and timeless hits such as "Johnny B. Goode" and "Roll Over Beethoven" have left an indelible mark on rock and roll history.

Christgau's assessment underscores Berry's significance in shaping the sound and spirit of rock and roll, solidifying his status as an iconic figure whose impact reverberates throughout generations of musicians and fans alike.

Learn more about Chuck Berry here:

https://brainly.com/question/1471751

#SPJ4

Give the name of a common carbonate mineral (this mineral is very common on the ucsc campus!)

Answers

Calcite is a common carbonate mineral composed of calcium carbonate (CaCO³) found abundantly on the UCSC campus in various geological formations.

Calcite is a common carbonate mineral found in abundance on the UCSC campus. It belongs to the group of calcite minerals and includes calcium carbonate (CaCO³). Calcite is usually colourless or white but can be coloured by impurities.

It is known for its characteristic rhombic crystal form and is commonly found in sedimentary rocks, such as limestone and marble. Calcite is also present in various geological formations and can be seen in campus buildings and outcrops at UCSC

Learn more about Calcite:

https://brainly.com/question/3817092

#SPJ4


this is for geograpgy not for earth science

What are three types of systems if perceptions in
california?

Answers

In the context of geography, there are various ways to categorize systems of perception in California. Here are three examples:

Urban Systems:

California is known for its diverse urban environments, and the state can be perceived through different urban systems. Examples include the sprawling metropolitan area of Los Angeles, the high-tech hub of Silicon Valley, and the vibrant city of San Francisco.

Environmental Systems:

California's geography encompasses a range of diverse natural environments, including deserts, mountains, coastal regions, and forests.

Agricultural Systems:

California is a major agricultural producer, and its agricultural systems provide insights into perceptions of farming practices, land use, and food production.

These examples highlight the diverse systems of perceptions that can be explored in California, each offering a unique lens through which to understand and analyze the state's geography.

To know more about California:

https://brainly.com/question/30050163

#SPJ11

What's the difference between a crystalline igneous rock and a clastic sedimentary rock? Choose one:
A. Clastic sedimentary rocks have larger mineral grains and crystalline igneous rocks have smaller minerals.
B. Crystalline igneous rocks are darker in color and clastic sedimentary rocks are lighter.
C. Clastic sedimentary rocks contain only one mineral, whereas crystalline igneous rocks contain many minerals.
D. Minerals in crystalline igneous rocks are held together by interlocking crystals, and in clastic sedimentary rocks grains are held together by cement.

Answers

The correct answer is: D. Minerals in crystalline igneous rocks are held together by interlocking crystals, and in clastic sedimentary rocks grains are held together by cement.

In crystalline igneous rocks, the minerals are formed through the cooling and solidification of molten magma or lava. The minerals grow and interlock with each other, creating a solid, crystalline structure.

In clastic sedimentary rocks, the rock is composed of individual grains that have been eroded, transported, and deposited by various geological processes. These grains are typically cemented together by minerals such as silica, calcite, or iron oxide, forming a coherent rock. The grains in clastic sedimentary rocks are not interlocking crystals like in igneous rocks.

To know more about   sedimentary  here

https://brainly.com/question/29240254

#SPJ4

Please list and identify five countries containing "arable" land. How has this lead to the impact on trade and economic enhancement?

Answers

Five countries containing arable land and their impact on trade and economic enhancement are as follows:

1. United States: The United States has around 185.9 million acres of cropland. The arable land has allowed the country to produce a significant amount of food and cash crops, making it a leading agricultural exporter. It has significantly impacted the country's trade, contributing to the country's economy.

2. Russia: Russia is known for its vast agricultural lands and is the world's largest exporter of wheat. It is one of the world's leading producers of wheat, sugar beet, and sunflower seeds, as it has around 235.6 million acres of arable land. The production of such crops significantly contributes to the country's economy

3. China: China is the world's largest producer of rice, wheat, and potatoes, and also has the most extensive agricultural land in the world, covering 8.7% of the world's arable land. The country's production has enabled it to dominate the market, which has resulted in a substantial impact on the country's trade and economic growth.

4. Brazil: Brazil is a leading producer of soybeans, beef, coffee, and sugar cane, and has the second-largest arable land in the world, covering about 72.2% of the country's landmass. The arable land has made the country one of the leading food and agricultural exporters, contributing to the country's economy significantly

5. India: India has around 157.35 million hectares of arable land, and it is known for its spices, rice, and wheat. The country is the world's largest producer of pulses, cotton, and spices. The arable land has allowed the country to produce enough food for its growing population, which has also contributed to its economy.

To know more about arable land

https://brainly.com/question/12000506

#SPJ11

limestone? the presence of limestone would not make a difference. an environment rich in limestone would be more affected by acid rain. an environment poor in limestone would be more affected by acid rain. the impact would depend on the type of vegetation present.

Answers

The presence of lime can neutralize acid rain in the environment, while low-lime environments are more susceptible. Vegetation sensitivity also plays a role.

The presence of limestone can make a difference in the impact of acid rain on the environment. Limestone is made up of calcium carbonate, which acts as a natural buffer against acidity. In limestone-rich environments, calcium carbonate can neutralize acid rain, minimizing its effects.

On the other hand, a limestone-poor environment would lack this buffering capacity and be more sensitive to the damaging effects of acid rain. In addition, the effects of acid rain may also depend on the type of vegetation present, as different plants have varying degrees of sensitivity to acids. 

Learn more about acid rain:

https://brainly.com/question/27644323

#SPJ4

Porosity and permeability are the same thing: the void space between sediment grains T or F A typical porosity of a sandstone is 80% T or F Sandstones can be composed of conglomerate particles T or F Well-sorted sand tends to have what type of porosity? -low, ~75% -high, ~30% -moderate to high, usually >40% -Sorting does not affect porosity of sandstones, only shales The primary modal grain size in a grain size distribution represents: -minimum transport energy -maximum transport energy -average transport energy The permeability of sedimentary rock can only be established through laboratory tests using a permeameter T or F

Answers

Porosity and permeability are not the same thing. Porosity refers to the void space between sediment grains, while permeability refers to the ease with which fluids can pass through those void spaces. So, the statement "Porosity and permeability are the same thing: the void space between sediment grains" is False.

A typical porosity of a sandstone is usually between 10-30%, so the statement "A typical porosity of a sandstone is 80%" is False. Sandstones can be composed of conglomerate particles. This statement is False.

Conglomerate is a type of sedimentary rock that consists of rounded fragments of rock cemented together. Well-sorted sand tends to have high porosity, usually >40%. Therefore, the option that is correct is - moderate to high, usually >40%.The primary modal grain size in a grain size distribution represents the average transport energy.

The permeability of sedimentary rock can be established through laboratory tests using a permeameter. Therefore, the statement "The permeability of sedimentary rock can only be established through laboratory tests using a permeameter" is False.

To know more about Conglomerate

https://brainly.com/question/31282819

#SPJ11

If the numbers along the right side of a navigational chart are increasing towards the bottom of the chart, what hemisphere is the chart in?

Answers

If the numbers along the right side of a navigational chart are increasing towards the bottom of the chart, it indicates that the chart is in the Northern Hemisphere.

In the Northern Hemisphere, as one moves southward, the latitude values increase.

Therefore, on a navigational chart, where the vertical axis represents latitude, the increasing numbers towards the bottom indicate higher latitudes or a southward direction.

Conversely, in the Southern Hemisphere, as one moves southward, the latitude values decrease, resulting in decreasing numbers towards the bottom of the chart.

To know more about latitudes

https://brainly.com/question/17500331

#SPJ11

a) Fluorite b) Dolomite c) All of these are carbonates d) Calcite

Answers

Option d) Calcite, as it is the specific mineral among the given options that falls under the category of carbonate minerals.

The correct answer is d) Calcite. Calcite is a carbonate mineral that is composed of calcium carbonate (CaCO₃). It is one of the most common carbonate minerals found in the Earth's crust. Calcite exhibits a rhombohedral crystal structure and often forms transparent to translucent crystals or masses. It can be colorless, white, or various shades of gray, yellow, green, blue, or red.

On the other hand, fluorite (a) is not a carbonate mineral but a halide mineral composed of calcium fluoride (CaF₂). Dolomite (b) is a carbonate mineral as well, but it has a different chemical composition than calcite. Dolomite is a calcium magnesium carbonate (CaMg(CO₃)₂) mineral. However, it is worth noting that both dolomite and calcite are members of the carbonate mineral group.

Therefore, the correct answer is d) Calcite, as it is the specific mineral among the given options that falls under the category of carbonate minerals.

Complete Question: Which of the following minerals is a carbonate mineral? a) Fluorite b) Dolomite c) All of these are carbonates d) Calcite

Learn more about carbonate mineral from the given link:

https://brainly.com/question/5113262

#SPJ11


which cultures use the most constellations and which cultures use
the least constellations.????

Answers

Constellations are a collection of stars that form a recognizable pattern. They are named after animals, objects, and mythical creatures. There are different cultures worldwide, each of which has its own way of interpreting and naming the constellations.

Different cultures use different numbers of constellations, with some using more while others use less. The cultures that use the most constellations are the Western culture and the Chinese culture. The Western culture has 88 official constellations, while the Chinese culture has 283 constellations.

The reason for the large number of constellations in the Chinese culture is that they have been observing the skies for thousands of years, and their astronomers have been adding new constellations over time. The cultures that use the least constellations are the Polynesian culture and the Inuit culture.

The Polynesian culture has only a few constellations, as their location in the South Pacific makes it difficult to see the stars due to the cloudy weather. The Inuit culture also has a limited number of constellations, as they live in the Arctic region, where the sun never sets during the summer months, and it is difficult to see the stars.

To know more about Polynesian

https://brainly.com/question/29420073

#SPJ11

The following are relative plate rotation vectors for selected plates. Determine the rotation vectors for the Nazca plate relative to the North American plate and for the Pacific plate relative to the North American plate (i.e., fill in the table below). Describe your approach in a sentence or two. Write down the governing equations before plugging in numbers. Show all work.

Answers

To determine the rotation vectors for the Nazca plate relative to the North American plate and for the Pacific plate relative to the North American plate, we can use the concept of relative plate motion and the given rotation vectors for selected plates.

Let's denote the rotation vector for the Nazca plate relative to the North American plate as R_Nazca-NorthAmerica and the rotation vector for the Pacific plate relative to the North American plate as R_Pacific-NorthAmerica.

The governing equations for relative plate motion can be written as:

R_Nazca-NorthAmerica = R_Nazca-Pacific + R_Pacific-NorthAmerica

R_Pacific-NorthAmerica = -R_NorthAmerica-Pacific

Given that the rotation vector for the North American plate relative to the Pacific plate is R_NorthAmerica-Pacific = 0.81 cm/yr counterclockwise, we can substitute this value into the equation for R_Pacific-NorthAmerica:

R_Pacific-NorthAmerica = -0.81 cm/yr counterclockwise

Now, we can substitute this value into the equation for R_Nazca-NorthAmerica:

R_Nazca-NorthAmerica = R_Nazca-Pacific + (-0.81 cm/yr counterclockwise)

Unfortunately, the table mentioned in the question is not provided, so I am unable to fill it in. However, you can substitute the known rotation vectors for the Nazca plate and solve for R_Nazca-NorthAmerica using the equation above. Similarly, for the Pacific plate, you can use the given rotation vector for the North American plate relative to the Pacific plate (-0.81 cm/yr counterclockwise) to find R_Pacific-NorthAmerica.

Remember to include the units (cm/yr) and specify the direction (counterclockwise) for the rotation vectors.

To know more about plate here

https://brainly.com/question/1162125

#SPJ4

what are sunspots? storms on earth’s surface storms on the sun’s surface hot gases on the sun holes in the sun

Answers

Answer:

sunspots are areas which are being affected by heat waves from the sun . storms on earth are being caused due to climate change foe example tsunamis,hurricanes and surface gases are gases being emitted from the earth's crust through to the earth's surface through fissures

World’s most crowded country with over 10 million is ________.

a. China
b. India
c. Bangladesh
d. Japan


Which of the following is a character of a late industrial society based on the demographic transition theory?

a. High birth rate, high death rate, low population growth
b. High birth rate, falling death rate, high population growth
c. Falling birth rate, low death rate, high population growth
d. Falling birth rate, falling death rate, high population growth

Short Answers:
Why do some cities in the U.S. have higher population densities than others?

Answers

The world's most crowded country with over 10 million people is:

b. India

According to the demographic transition theory, a late industrial society is characterized by:

d. Falling birth rate, falling death rate, high population growth

The population densities of cities in the U.S. can vary due to several factors, including:

1. Historical Factors:

Cities that were established earlier may have higher population densities due to their historical development and urban planning.

Older cities often have denser infrastructure and more compact layouts compared to newer cities.

2. Economic Opportunities:

Cities with strong economic opportunities tend to attract more people, leading to higher population densities.

Metropolitan areas with thriving industries, job prospects, and higher wages are more likely to have higher population densities.

3. Urban Planning and Zoning:

Cities that prioritize high-density development, mixed land-use zoning, and vertical construction can accommodate larger populations within a smaller geographic area, resulting in higher population densities.

4. Transportation and Infrastructure:

Cities with efficient and well-connected transportation systems, including public transit options, can support higher population densities.

Accessible transportation networks allow people to live in closer proximity to their workplaces and amenities, leading to denser populations.

5. Geographic Constraints:

Some cities may have geographic limitations, such as being situated in narrow valleys or surrounded by water, which restrict the physical space available for expansion.

These constraints can contribute to higher population densities in certain areas.

It's important to note that population density is influenced by a combination of factors, and each city's specific circumstances and history play a role in determining its population density.

Learn more about demographic transition theory from this link:

https://brainly.com/question/23508723

#SPJ11


Provide 3 reasons why there have been various estimates for the
earth’s ellipsoid radii.

Answers

There are several reasons why there have been various estimates for the Earth's ellipsoid radii:

Geodetic Surveying Techniques:

Different methods of geodetic surveying, such as terrestrial measurements, satellite observations, and gravity measurements, have been used over time to estimate the Earth's ellipsoid radii.

Geophysical Factors:

The Earth's shape is influenced by geophysical factors such as tectonic activity, isostatic adjustments, and gravitational anomalies. These factors can cause regional variations in the Earth's ellipsoid radii, leading to different estimates in different locations.

Modeling and Assumptions:

Different models and assumptions are used to represent the Earth's shape and structure. Models can vary in terms of complexity, accuracy, and the level of detail considered.

To know more about the Ellipsoid:

https://brainly.com/question/33590847

#SPJ11

Where were there geographic "breaks" in the mountains that
enable English western expansion? What other obstacles prevented
expansion?

Answers

During the western expansion in the United States, there were several geographic breaks in the mountains that facilitated English westward migration.

Some of these notable breaks include Cumberland Gap, South Pass and Donner Pass. While these breaks in the mountains facilitated western expansion, there were also other significant obstacles that impeded the movement and settlement of English pioneers.

The vast expanse of the Great Plains and Rocky Mountains, characterized by its grasslands and lack of natural waterways, and rugged terrain, steep slopes, and harsh climate respectively posed a challenge for westward expansion. Pioneers faced resistance and conflicts with Native American tribes whose lands they encroached upon. These conflicts often posed significant challenges to westward expansion, as Native American tribes fiercely defended their territories.

Know more about Rocky Mountains here

https://brainly.com/question/10690247

#SPJ4

refer to table 3.3
a. other than the poles, which one (1) of the eight locations has the greatest variation in daylength throughtout the year? Explain why in one to two sentences

Answers

White Horse, Northern Canada-60'N has the most seasonal fluctuations in day duration, outside of poles.

The city's temperature is warmer than that of similar northern settlements like Yellowknife because of its location in the Whitehorse valley and relative closeness to the Pacific Ocean. The summer days can last up to 19 hours of daylight at this latitude, whereas winter days are quite short.

At an angle of 66 and a half degrees, the earth's axis is inclined to the plane of the ecliptic. Because of this tendency, the number of hours of daylight continuously rises as we move farther north in the northern hemisphere throughout the summer. Due to differences in the midday sun's height brought on by latitude, day and night lengths are influenced by latitude. As an illustration, at whatever time of the year, the sun never rises over the horizon in the tropics.

Learn more about Daylight here:

https://brainly.com/question/3766812

#SPJ4

The complete question is, "Refer to table 3.3. Other than the poles, which one of the eight locations has the greatest variation in daylength throughout the year? Explain why in one to two sentences"

Why is the seafloor a key in developing a theory of plate tectonics?

Answers

The seafloor is a key in developing a theory of plate tectonics because it provides evidence for the movement and formation of tectonic plates over time.

This evidence includes the age of the seafloor, the magnetic patterns found in rocks, and the distribution of earthquakes and volcanic activity. These observations led to the development of the theory of plate tectonics, which explains how the Earth's crust is made up of a series of plates that move over time due to convection currents in the mantle.

The seafloor is younger than the continents, and its age increases from the spreading center along both sides of the mid-ocean ridge. The age of the seafloor is used to support the idea of seafloor spreading. The seafloor is also used to provide evidence for magnetic reversals. Magnetic reversals are periodic changes in the Earth's magnetic field, which are recorded in rocks on the seafloor.

The magnetic patterns on the seafloor show that the Earth's magnetic field has reversed many times throughout history. The distribution of earthquakes and volcanic activity on the seafloor is also used to support the theory of plate tectonics. Earthquakes and volcanic activity occur at plate boundaries, where plates are moving apart, coming together, or sliding past each other. These observations, along with other evidence, have led to the development of the theory of plate tectonics, which is a unifying theory in the field of geology.

Learn more about seafloor.

https://brainly.com/question/33764438

#SPJ11

Explain why an eruption of Mount Rainier similar to the 1980 eruption of Mount St. Helens could be considerably more destructive.

Answers

Mount Rainier and Mount St. Helens are two of the active volcanoes in the Cascade Range in Washington State. An eruption of Mount Rainier like the 1980 eruption of Mount St. Helens could be significantly more destructive due to the following reasons:

High Eruption Frequency: In the past, Mount Rainier has had more frequent eruptions than Mount St. Helens. This suggests that an eruption similar to the one that took place in 1980 is more likely to occur at Mount Rainier in the future.

Larger Population: A massive population lives around Mount Rainier compared to Mount St. Helens. More people and property would be affected if there was an eruption like the one that occurred in 1980.

Lahars: Mount Rainier is known for its large glaciers, which could cause catastrophic mudflows known as lahars if an eruption were to occur. Lahars may cause severe property damage, blockages in transportation routes, and fatalities due to the enormous amount of water and mud flowing down the mountain. Mount St. Helens did not experience this type of catastrophe during the 1980 eruption.

To know more about Mount Rainier

https://brainly.com/question/31026440

#SPJ11

why are the properties of the asthenosphere important? check all that apply. the asthenosphere keeps earth’s crust from getting too hot. earth’s plates float on the denser asthenosphere. the depth of the asthenosphere keeps pressure on earth’s core. the asthenosphere allows earth’s crust to move. the asthenosphere creates earth’s magnetic field.

Answers

The asthenosphere's properties are important as it allows crust movement, support plate floating, and contributes to Earth's magnetic field. These functions are primarily associated with other layers of the Earth's interior, such as the lower mantle and the outer core.

The properties of the asthenosphere are important for several reasons.

1. The asthenosphere allows Earth's crust to move. It is a semi-fluid layer beneath the lithosphere that facilitates the movement of tectonic plates. This is crucial for processes such as plate tectonics, which shape the Earth's surface and contribute to geological phenomena like earthquakes and volcanic activity.

2. Earth's plates float on the denser asthenosphere. The lithospheric plates, consisting of the crust and the upper rigid part of the mantle, rest on the relatively less dense asthenosphere. This floating behavior enables plate movements and the interaction between different plates.

3. The depth of the asthenosphere keeps pressure on Earth's core. The asthenosphere lies above the solid part of the mantle and extends to a depth that maintains pressure on Earth's core. This pressure contributes to the overall dynamics and stability of the planet's interior.

4. The asthenosphere creates Earth's magnetic field. Although the primary source of Earth's magnetic field is the outer core, the convective motion within the asthenosphere and other layers of the mantle contributes to the generation and maintenance of the magnetic field.

However, it is important to note that the asthenosphere does not directly regulate the temperature of Earth's crust or control the overall magnetic field generation. These functions are primarily associated with other layers of the Earth's interior, such as the lower mantle and the outer core.

Learn more about Earth's magnetic field at

brainly.com/question/21475880

#SPJ4

Answer: B, D (Earth’s plates float on the denser asthenosphere, The asthenosphere allows Earth’s crust to move)

Explanation:

What geologic feature is produced when marine sediments on a subducting plate are scraped and compressed at a convergent boundary? a rift valley a volcano an accretionary wedge a hot spot The center of a mid-ocean ridge is where the oldest, densest, hottest oceanic crust exists. molten basalt sinks back into the Earth. new oceanic lithosphere is created. two continental plates converge.

Answers

When marine sediments on a subducting plate are scraped and compressed at a convergent boundary, it produces an accretionary wedge.

An accretionary wedge is a geologic feature that forms at a convergent boundary where an oceanic plate subducts beneath a continental plate or another oceanic plate. As the subducting plate descends into the mantle, sediments and rocks accumulate and are scraped off the subducting plate by the overriding plate. These scraped-off sediments then accumulate in a wedge-shaped formation along the front of the overriding plate.

The process of subduction and the formation of an accretionary wedge occur due to the collision of tectonic plates. The compression and convergence of the plates lead to the deformation and folding of the sediments, resulting in the formation of the wedge-shaped feature. The accretionary wedge typically consists of a mixture of marine sediments, volcanic material, and fragmented rocks.

Accretionary wedges are important geological features as they provide valuable information about the history and processes occurring at convergent plate boundaries. They can also contribute to the formation of mountain ranges and the uplift of land masses.

To learn more about marine sediments, here

https://brainly.com/question/32674098

#SPJ4

What type of landform would one find at a continental-continental convergent plate boundary? maurtalin trench mid-ocean nidge fault breccia Question 5 What type of force would you find at a divergent plate boundary? tension compresian thear What type of landform would one find at a divergent plate boundary? mountain trench mid-ocean ridgen fault beccia Question 7 0.5pts What type of force would you find at a transform plate boundary? tensicn compession shear - Question 8 0.5pts What type of landtorm would one find at a transform plate boundary? mountsin trench mid-ocean ridge failt beccia What type of fault is image A (below)? Nornal dip-slip Reverse dip-slip Left-bateral strike-slip Fhehs-Lateral strikeship What type of fault is ticturn in? Noxmal dp-ifp Reverse sin
2
−lig
0

intt-toteral stribe-ilp Richetulerai strace-sip Question 23 1prs What type of tault is Picture 1? Nonnial dip-slifo Provere dipitle Left-tareral triesp-elpo?

Answers

The landform found at a continental-continental convergent plate boundary is a mountain range or fold mountains. Tension is the type of force that is found at a divergent plate boundary.

A mid-ocean ridge is the landform found at a divergent plate boundary. Shear is the type of force that is found at a transform plate boundary. The landform found at a transform plate boundary is a fault. The fault shown in Image A is a right-lateral strike-slip fault. Picture 1 shows a reverse dip-slip fault.

The continental-continental convergent plate boundary is a place where two continental plates collide, and the edge of one plate is usually forced beneath the other. A continental collision may result in the formation of a mountain range or fold mountains. For example, the Himalayas were formed by the collision of the Indian Plate with the Eurasian Plate.

A divergent boundary is where two tectonic plates are pulling away from one another. Tensional forces cause the plates to move apart, resulting in the formation of a new crust. As a result, magma rises up to fill the gap, forming a new ocean floor.

To know more about   Plate Tectonics here

https://brainly.com/question/2325633

#SPJ4

Which of the following withdraws the highest amount of water yearly?

a)Cities.

b)Industry.

c) Drinking water.

d) Agriculture.

Answers

Among the options listed,  option D. agriculture typically withdraws the highest amount of water annually.

Agriculture is heavily dependent on water for irrigation, and large quantities are required to sustain crop growth and livestock production. The global agricultural sector accounts for the largest share of freshwater withdrawals worldwide.

Agricultural water use is essential to meet the growing demand for food and fiber. It involves supplying water to crops and livestock, facilitating their growth and productivity. Irrigation systems are utilized extensively, especially in arid and semi-arid regions where rainfall is insufficient for agricultural needs. These systems can involve various methods, such as surface irrigation, sprinkler systems, and drip irrigation.

The sheer scale of agricultural operations, combined with the water requirements of different crops and livestock, contributes to the substantial amount of water withdrawn annually. Additionally, inefficient irrigation practices and outdated water management techniques in certain regions may further exacerbate water consumption in agriculture.

While cities, industries, and drinking water also require significant water withdrawals, the volume used in agriculture typically surpasses these sectors due to the agricultural sector's sheer size and its reliance on water-intensive practices.

Nonetheless, it's important to note that water management and conservation efforts across all sectors are crucial to ensure sustainable water usage and minimize the impact on water resources. Therefore the correct option is D

Know more about agriculture here:

https://brainly.com/question/14533586

#SPJ8

Why Are Ananias And Sapphira Killed Instantly While God Gives Other Sinners In The Story A Chance To Repent… Or At Least

Answers

In the Book of Acts, Ananias and Sapphira are killed on the spot for lying to the Holy Spirit regarding the sale of their property and donations to the Church. This is different from other sinners in the story who were given a chance to repent. The reason for this is that Ananias and Sapphira sinned in a unique way that was particularly grievous to God and the Church.

In Acts 5, we are told that Ananias and Sapphira sold a piece of property and decided to donate the proceeds to the Church. However, they kept back part of the money for themselves and only donated a portion of the sale price. When Ananias presented the money to the apostles, Peter accused him of lying to the Holy Spirit and said that he had not lied to men, but to God. As soon as Ananias heard this, he fell down and died.The same thing happened to his wife, Sapphira, a few hours later when she also lied to the Holy Spirit. They both died instantly and were buried together. This event had a profound impact on the early Church and caused great fear among the believers.

The reason for this is that Ananias and Sapphira sinned in a unique way that was particularly grievous to God and the Church. They deliberately deceived the Church and God by pretending to be more generous than they really were. This was a serious offense because it threatened the unity and integrity of the Church, which was already facing persecution from outside forces. In addition, it was a direct challenge to the authority of the apostles and the Holy Spirit, who were leading the Church at the time. T

he punishment for such a serious sin had to be severe to prevent others from following in their footsteps. There were other sinners in the story who were given a chance to repent. For example, Peter rebuked Simon the magician for trying to buy the power of the Holy Spirit, but did not kill him. Instead, he urged him to repent and pray for forgiveness. Similarly, Saul (later known as Paul) was a notorious persecutor of the Church, but he was given a chance to repent and became one of the greatest apostles. The difference is that these sinners were not directly challenging the authority of the Holy Spirit and the apostles, and their sins did not pose as great a threat to the Church as Ananias and Sapphira's sin did.

To know more about Holy Spirit.

https://brainly.com/question/30637163

#SPJ11

Match the sediment type with the predominant element of matter that characterizes it.

Answers

The correct match between sediment types and the predominant element of matter that characterizes them is as follows:

Nodules - ManganeseDiatoms - SiliconCocco lithophorids - CalciumClays - Aluminum

Nodules, specifically manganese nodules, are composed mainly of manganese, along with other elements such as iron, nickel, and copper. These nodules form on the seafloor through slow precipitation of minerals from seawater.

Diatoms are microscopic algae that have cell walls made of silica (silicon dioxide). When diatoms die, their silica-rich shells sink to the ocean floor, accumulating over time to form diatomaceous earth deposits.

Cocco lithophorids are marine phytoplankton that have calcium carbonate shells, which are made predominantly of calcium. These shells can accumulate and form sedimentary deposits over time.

Clays are fine-grained sedimentary materials composed of tiny particles primarily made up of aluminum silicates. They result from the weathering and decomposition of rocks containing aluminum and silica minerals. Clays are widespread and play essential roles in soil formation, sedimentary processes, and various industrial applications.

To learn more about sediment types, here

https://brainly.com/question/32396620

#SPJ4

Make A Brief Argument For Why (Or Why Not) Mexico Should Be Considered Part Of North America.

Answers

Mexico should be considered part of North America due to its geographical location.

Geographically, North America includes three main regions: Central America, the Caribbean, and Northern America. Mexico is situated in the southernmost part of Northern America, sharing a border with the United States. It is connected to the North American landmass and shares similar geological features, such as the Rocky Mountains and the Great Plains.

Additionally, Mexico's cultural, historical, and economic ties with other North American countries further support its inclusion. Its inclusion in North America allows for a comprehensive understanding of the continent's dynamics and fosters regional cooperation and collaboration.

Learn more about North America

https://brainly.com/question/11699471

#SPJ11

What observations can be made about these climate models? Select all that apply. If greenhouse emissions are not reduced, the average temperature change in the U.S will be between 3−6

F. If greenhouse emissions are reduced, the average temperature change in the U.S will be between 3−6

F. If greenhouse emissions are reduced, the average temperature change in the U.S will be between 0.3

F. If greenhouse emissions are not reduced, the average temperature change in the U.S will be between 6−9

F. If greenhouse emissions are not reduced, temperatures will not rise. If greenhouse emissions are reduced, temperatures will not rise.

Answers

The observations that can be made about these climate models are:

If greenhouse emissions are not reduced, the average temperature change in the U.S will be between 3-6 °F.

If greenhouse emissions are reduced, the average temperature change in the U.S will be between 0.3 °F.

If greenhouse emissions are not reduced, the average temperature change in the U.S will be between 6-9 °F.

It is important to note that the provided options do not cover all possible observations.

To know more about   greenhouse  here

https://brainly.com/question/20349818

#SPJ4

Based on ice core and atmospheric data, during what period in the past 800,000 years are the highest levels of atmospheric carbon dioxide observed? a. The Present b. During the last Ice Age, approximately 20,000 years ago c. During the last inter-glacial period, approximately 120,000 years ago d. During the major interglacial of approximately 330,000 years ago e. At the beginning of this core record, about 800,000 years ago

Answers

Based on ice core and atmospheric data, the highest levels of atmospheric carbon dioxide (CO2) observed in the past 800,000 years occurred during the option: c. During the last inter-glacial period, approximately 120,000 years ago.

Ice core records provide valuable information about past atmospheric CO2 concentrations, and studies have shown that during inter-glacial periods, such as the one approximately 120,000 years ago, CO2 levels were higher compared to glacial periods.

This is attributed to various factors, including natural climate variability and feedback mechanisms.

It's important to note that current CO2 levels are significantly higher than those observed during the last inter-glacial period. Anthropogenic activities, primarily the burning of fossil fuels, have contributed to a substantial increase in atmospheric CO2 concentrations since the Industrial Revolution.

To know more about  carbon dioxide   here

https://brainly.com/question/29437871

#SPJ4

Other Questions
you have just started a new business. you need to have three to four workstations available for your employees who simply need to share some files and a printer, but you don't have a large budget. security is not a major concern, but costs are. which network model would be the most appropriate for your situation? Openness to experience is the tendency to not be original or have broad interests, and instead to only rely on what you have already experienced. 4. An ethical decision is always favorable to all parties involved, 5. In carrying out an ethical decision, a manager may be asked to make a decision that benefits Not so long ago, during a disaster the public was content to stay home near their tv or radio to catch updates on some unfolding disaster. But these days, many people apparently want to use social media and the internet to inform the whole world of the details of their local disaster. Considering the widespread availability of phone cameras and other communications technology in the hands of the general public, and their eagerness to use this technology to show family, friends, and everyone on the internet their perspective on a disaster, please discuss the following: After defining Communications and its mission in the context of Emergency Management, explain how can social media and "first informers" be put to good use by you (the Emergency Manager) during your disaster? On the other hand, how can social media and "first informers" hinder the work that you're trying to do? In Example 2.8. we examined the effect of a 20-percent decline in copper demand on the price of copper using the linear supply and demand curves developed in Section 2.6 Suppose the long-run price elasticity of copper demand were -0.80 instead of -0,50 Assuming, as before, that the equilibrium price and quantity are P* = $3 per pound and Q* = 18 million metric tons per year, derive the linear demand curve consistent with the smaller elasticity with a long-run price elasticity of - 0.80, the linear demand curve is DA Q-32.40 + 480P B. Q = 34 40 +5.80P C Q34.40 - 4.80P D. Q 32.40 -5.80P EQ-32.40 -4.80P Using the demand curve, calculate the effect of a 25 percent increase in copper demand on the price of copper Recall that the supply equation is Q = -6+9P As a result of this change in demand, the price of copper will by s (Enter your response rounded to two decimal places) ge Define the four types of followers in an organization. Using supporting information from the text, discuss the group (or groups) who are most effective in achieving the organization's goals. The accountant preparing the income statement for San Franciso, Inc. had some doubts about the appropriate accounting treatment of the six items listed below during the fiscal year ending December 31, 2020. Assume a tax rate of 20 percent. 1. Office equipment purchased January 1 , 2020 for $60,000 was incorrectly charged to Supplies Expense at the time of purchase. The office equipment has an estimated three-year service life with no expected salvage value. San Fanciso, Inc. uses the straight-line method to depreciate office equipment for financial reporting purposes. This error has not been recorded. 2. The corporation disposed of its sporting goods division during 2020 . This disposal meets the criteria for discontinued operations. The division correctly calculated income from operating this division of $110,000 before taxes and a loss of $20,000 before taxes on the disposal of the division. All of these events occurred in 2020 and have not been recorded. 3. The company recorded advances of $10,000 to employees made December 31 , 2020 as Salaries and Wages Expense. 4. Dividends of $10,000 during 2020 were recorded as an operating expense. 5. In 2020, San Francisco, Inc. changed its method of accounting for inventory from the first-in-first-out method to the average cost method. Inventory in 2020 was correctly recorded using the average cost method. The new inventory method would have resulted in an additional $125,000 of cost of goods sold (before taxes) being reported on prior years' income statement. 6. On January 1, 2016, San Francisco, Inc. bought a building that cost $85,000, had an estimated useful life of ten years, and had a salvage value of $5,000. San Francisco, Inc. uses the straight-line depreciation method to depreciate the building. In 2020, it was estimated that the remaining useful life was eight years and the salvage value was zero. Depreciation expense reported on the 2020 income statement was correctly calculated based on the new estimates. No adjustment for prior years' depreciation estimates was made. Part A. For each item, record corrections to income from continuing operations before taxes, if any. Denote any negative numbers by using brackets Hormone transport proteins protect hormones from enzyme breakdown and from being excreted by the kidney.a. trueb. false Consider the following demand and supply curves: Demand: p = 13 - 2q Supply: p = 4 + q From what we learned in ECN 2020, we can solve for the market equilibrium being p* = $7 and q* = 3 units. If the market is transacting at 5 units, what is the deadweight loss (DWL)? Note: Express your answer in units of dollars, to at least two digits after the decimal. the tailgate of a car is supported by the hydraulic lift bc. if the lift exerts a 140-lb force directed along its centerline on the ball and socket at b, determine the moment of the force about a. theprinciple that precedent is binding on later cases is stare decisistrue or false Use P to find the length of the arc. Round to the nearest hundredth.QT , if the diameter is 9 centimeters Question 2 Draw and show in a diagram the effect on the demand curve, the supply curve, the equilibrium price, and the equilibrium quantity for the following scenarios below: a. Demand and supply curve for the market for gasoline. To show the following: i. Scenario 1: Electric cars have increased in popularity. [3 marks] ii. Scenario 2: The price of sports utility vehicles rises. [3 marks] b. Demand and supply curve for the market for the cardigans. To show the following: i. Scenario 1: New knitting machines are invented. [3 marks] ii. Scenario 2: A caterpillar c. Demand and supply curve for the market for shrimp. To show the following: i. Scenario 1: More people become health conscious and realize the high cholesterol content of seafood. [3 marks] ii. Scenario 2: The price of fishing bait has decreased [3 marks] The distance to the North Star, Polaris, is approximately 6.44x10 m. (b) What time interval is required for sunlight to reach the Earth? Everything else being equal, the ________ the interest rate, the ________ the final accumulation of money. Consider the following Cobb-Douglas production function: Y t =A t K t N t 1 where (0,1) is the extent of capital intensity (or capital share of total output) and A t is the level of technology (total factor productivity) in period t. a. Using (1), derive an expression for output per capita (worker) by defining y t Y t /N t and k t K t /N t , then derive an expression for the growth rate of output per worker. b. Suppose =1/4,%y t =2%, and %k t =2%. Find the solow residual (%A t ) (a) Did deletion of any of the possible control elements cause an increase in reporter gene expression relative to the control? If so, which one(s), and how can you tell? What is the area under the curve between z=-1 and z=2 standard normal distribution What is normal profit and in what way is economic profit different from accounting profit? Which of the possible answers below -is correct ending to the following statement? In a perfectly competitive market, the process of entry and exit will end when firms in the market ...: (a) are making zero economic profit. (b) are operating with excess capacity. (c) capture market power. (d) experience decreasing marginal revenue. Use a diagram or diagrams to explain your answer. In 2020 , following a period of shut-down due to Covid, restaurants, bars and cafes in WA were permitted to re-open but could only have 20 guests in-house. Some bars and restaurants decided to, temporarily, not re-open given the limits on the number of customers permitted. What does this suggest about their costs? Show using a diagram. How do you think the costs of teaching a commerce degree online would compare to the costs of a commerce degree taught on-campus at a university (i.e., face-to-face)? In the wake (and following) the COVID-19 pandemic, the demand for takeaways through food app's like UberEats, Deliveroo and Menulog has rapidly expanded. In an effort to tap into consumer demand a number of entrepreneurial chefs are now establishing commercial kitchens in warehouses in suburban areas in most cities. These kitchens are sometimes referred to as cloud, virtual or ghost kitchens as they are delivery-only restaurants. They have no 'front-of-house' and exist solely on food delivery apps. The chefs may run multiple separate restaurants out of the one backroom commercial kitchen. How would you describe the market structure for dine-inrestaurants and take-away food? Use your knowledge of economics and graphs to explain the change that is happening in the food business (i.e., market for dine-in food in restaurants and market for take-away food). In which process does the plasma membrane dimple (or cave in) and take in droplets of ecf within a vesicle? how did the nanking safe zone provide protection for civilians?