Would a family whose average medical expenses were $15,000 a year save more money with a PPO that has a $5,000 deductible or one that requires the insured person to pay 20% of the cost? Explain your answer

Answer:

Ok It's all right.hahahhahah

Answer:

1degree celcius is my answer

Answer:

The mass of the steel wool before burning can be calculated by finding the difference between the mass of the steel wool and the mass of the iron oxide produced.

If the mass of the iron oxide produced is 715 g, then the mass of the steel wool before burning was:

Mass of steel wool before burning = Mass of steel wool + Mass of iron oxide produced

Since the steel wool was entirely converted to iron oxide, we know that the mass of iron in the steel wool is equal to the mass of iron in the iron oxide produced. Since iron has an atomic mass of 56 g/mol, we can use this to find the mass of iron in the 715 g of iron oxide:

Number of moles of iron = mass of iron oxide produced / atomic mass of iron

Number of moles of iron = 715 g / 56 g/mol

Number of moles of iron = 12.77 mol

Since the mass of iron in the steel wool is the same as the mass of iron in the iron oxide produced, we can use the same number of moles of iron to find the mass of steel wool before burning:

Mass of steel wool before burning = Number of moles of iron x (atomic mass of iron / molar mass of steel wool)

The molar mass of steel wool is the sum of the atomic masses of its constituent elements (iron and carbon) multiplied by their respective stoichiometric coefficients:

Molar mass of steel wool = (atomic mass of iron x 1) + (atomic mass of carbon x 1)

Molar mass of steel wool = (56 g/mol x 1) + (12.01 g/mol x 1)

Molar mass of steel wool = 68.01 g/mol

Substituting the known values into the equation, we get:

Mass of steel wool before burning = 12.77 mol x (56 g/mol / 68.01 g/mol)

Mass of steel wool before burning = 10.49 mol

Therefore, the mass of the steel wool before burning was:

Mass of steel wool before burning = Mass of steel wool + Mass of iron oxide produced

Mass of steel wool before burning = 715 g + (10.49 mol x 68.01 g/mol)

Mass of steel wool before burning = 1,428 g (rounded to the nearest whole number)

Explanation:

Answer:

not specific

Explanation:

The type of bonding present in gallium. is metallic bonding which involves the positive atomic nucleus of the gallium atoms being embedded in a sea of mobile valence electrons.

The electrostatic attraction between conduction electrons and positively charged metal ions leads to metallic bonding, a type of chemical bonding. A structure of positively charged ions may share free electrons in this process.

Metallic bonding is responsible for the high melting and boiling points of metals such  as gallium.

Learn more about metallic bonding at: https://brainly.com/question/25844027

#SPJ1

The order of decreasing boiling point is: Nonadecane > Paraffin > Pentane > 2,2-dimethylpropane > Propane.

The boiling point of hydrocarbons depends on their molecular size and shape, as well as intermolecular forces, such as Van der Waals forces. Larger molecules and molecules with more branching tend to have weaker intermolecular forces, resulting in lower boiling points.

So, the order of decreasing boiling point of the given hydrocarbons is:

Nonadecane: This is the largest molecule among the given hydrocarbons, and it has the strongest intermolecular forces due to its size. It has the highest boiling point among the given options.

Paraffin: Paraffin is a general term for straight-chain alkanes, such as methane, ethane, propane, and butane. Among these, propane has the lowest molecular weight and boiling point, while butane has a higher boiling point due to its larger size. However, the exact boiling point of paraffin depends on the specific molecule, so we cannot say for sure where it falls in this list.

Pentane: Pentane is a branched-chain alkane, which means it has weaker intermolecular forces than a straight-chain alkane of the same size. However, it still has a higher boiling point than propane due to its larger size.

2,2-dimethylpropane: This molecule is highly branched, which means it has very weak intermolecular forces. It has the lowest boiling point among the given options.

So, the order of decreasing boiling point is: Nonadecane > Paraffin > Pentane > 2,2-dimethylpropane > Propane.

Learn more about boiling point of hydrocarbons here brainly.com/question/2928703

#SPJ4

the units for the rate constant, k, for a second-order reaction is:  

k = L. mol⁻¹. s⁻¹

correct option: a

A word used to describe the rate of a chemical reaction when the rate is proportional to the product of the concentrations (in moles) of two of the reactants, as well as the square of the molar concentration of such reactant if there is only one, is called as bi-molecular kinetics. Second-order reaction rates are inversely correlated with the square of a reactant's concentration or the product of the concentrations of two reactants.

Nitrogen dioxide creates nitrogen monoxide and oxygen as an example of a second-order process.

Correct option: a

To know more about rate constants refer to:

https://brainly.com/question/26127112

#SPJ1

The Molar mass concept helps to determine the moles of substance fir provide mass of substance. The oxygen atoms present in 52.06 g of carbon dioxide are equals to 1.424 ×10²⁴. So, correct answer is option (c).

Molar mass is the mass of one mole of a substance in grams of that substance. Molar mass is determined using atomic mass values from the periodic table. The atomic mass is written in atomic mass units, and molar mass is written in grams. Now the mass of carbon dioxide =52.06 g

The molar mass of carbon dioxide, M= 2×16 g/mol + 12 g/mol = 32 g/mol + 12.

01 g/mol = 44.01 g/mol

We can now solve this problem by converting 52.06 g of carbon dioxide to moles of carbon dioxide. Avogadro's number (6.022×10²³) into carbon dioxide molecules. Finally multiply by 2. Because every carbon dioxide molecule has two oxygen atoms.

= (52.06 g CO₂) × (1 mol CO₂)/44.1 g CO₂) × (6.022×10²³ CO₂ molecules/1 mol CO2)× (2 Oxygen atoms/1 CO₂ molecule)

= 1.424×10²⁴ oxygen atoms.

So, the desired number of atoms is 1.424×10²⁴ oxygen atoms.

To learn more about Molar mass, visit :

https://brainly.com/question/837939

#SPJ4

When an organism dies, bacteria degrade it. During the decomposition process, carbon dioxide is emitted into the environment or water. Hence, it has no impact on the decomposers.

When animals breathe or decay (decompose), carbonate rocks are worn, forest fires happen, and volcanoes erupt, carbon dioxide is naturally released into the atmosphere.

Thus, even during process of cellular respiration, carbon dioxide is expelled into the atmosphere.  Hence, it has no impact on the decomposers.

To know more about the Decomposition, here

https://brainly.com/question/18566759

#SPJ1

Therefore, the freezing point of water will be lowered by 5.58 °C when 1.5 mol/kg of this salt is added to the water.

Freezing point is the temperature at which a liquid substance turns into a solid state at a given pressure. It is the temperature at which the solid and liquid states of the substance are in equilibrium. The freezing point is a physical property of a substance that depends on its chemical composition and pressure. The freezing point of pure water, for example, is 0 degrees Celsius (32 degrees Fahrenheit) at standard atmospheric pressure. However, the freezing point of a substance can be lowered or raised by adding solutes to the liquid or by increasing the pressure on the liquid.

Here,

Assuming the molality of the salt is 1.5 mol/kg, the freezing point depression can be calculated using the formula:

ΔTf = Kf x molality x i

where ΔTf is the freezing point depression, Kf is the freezing-point depression constant, molality is the molality of the solution, and i is the vent Hoff factor that takes into account the dissociation of the salt into ions. Since the salt breaks into two ions (Na+ and Cl-), i = 2.

Substituting the given values, we get:

ΔTf = -1.86 °C/m x 1.5 mol/kg x 2

ΔTf = -5.58 °C

To know more about freezing point,

https://brainly.com/question/2292439

#SPJ1

The force of attraction that binds oppositely charged ions together is called an electrostatic force or an ionic bond.

This type of bond results from the transfer of electrons from one atom to another, resulting in the formation of ions with opposite charges. The positively charged ion (cation) is attracted to the negatively charged ion (anion), and this attraction results in the formation of an ionic bond. Ionic bonds are typically strong and can be found in many types of compounds, including salts and minerals.

The electrostatic force is an important fundamental force in nature and plays a crucial role in many physical and chemical phenomena, such as the binding of atoms to form molecules, the behavior of charged particles in electric and magnetic fields, and the behavior of materials with electrical conductivity.

To know more about electrostatic force here

https://brainly.com/question/9774180

#SPJ4

Titrant is a reagent added to the analyte solution during titration to react with the analyzed substance. The endpoint is when the titration is complete and the reaction has reached the desired stoichiometry. The analyte is the substance being analyzed in a titration. Buret is a laboratory instrument used to dispense precise volumes of liquid during titrations. The indicator is a substance added to the analyte solution that changes colour when the endpoint of the titration is reached.

Titration is a laboratory technique used to determine the concentration of a substance in a solution by reacting it with a known amount of another substance of known concentration.

Titration is widely used in analytical chemistry to quantitatively analyse a wide range of substances, including acids, bases, salts, and oxidizing and reducing agents. It is a precise and reliable technique for determining the concentration of a substance in a solution.

To learn more about chemicals, visit here:

https://brainly.com/question/13145357

#SPJ1

The correct simplified equation for cellular respiration is glucose + oxygen → carbon dioxide + water . i.e. option A

Cellular respiration is defined as the process by which cells convert glucose and oxygen into energy in the form of ATP (adenosine triphosphate). It is a metabolic process that occurs in the mitochondria of eukaryotic cells and in the cytoplasm of prokaryotic cells.

Cellular respiration can be divided into three main stages viz. glycolysis, kreb's cycle and electron transport chain. These are discussed below:

Glycolysis: The first stage of cellular respiration is glycolysis, which takes place in the cytoplasm. In glycolysis, glucose is broken down into two molecules of pyruvate, and a small amount of ATP is produced.

Kreb's cycle: The second stage of cellular respiration is the Krebs cycle, which takes place in the mitochondria. In the Krebs cycle, pyruvate is broken down into carbon dioxide, and more ATP is produced.

Electron transport chain: The final stage of cellular respiration is the electron transport chain, which also takes place in the mitochondria. In the electron transport chain, electrons from the Krebs cycle are used to produce a large amount of ATP.

Thus, it is estimated that cellular respiration produces a net gain of 36-38 ATP molecules per molecule of glucose. The process of cellular respiration is essential for providing cells with the energy they need to carry out their functions and is an important part of the metabolism of all living organisms.

Therefore, the statement that represents a simplified equation for cellular respiration is option A.

To know more about cellular respiration here

https://brainly.com/question/30791350

#SPJ4

A total of 4.46% of the experiment was off. For a single mole of gas at stp, an experimental volume = 21.4 l is found.

One mole of the a chemical element and chemical compound occupies one molar volume (Vm) at standard pressure and temperature (STP). The molarity (M) and mass density () can be divided to calculate it.

The concept of volume is broad. With specialized glassware and measuring units commonly in milliliters (mL) or liters, the volume of the a liquid can be determined directly (L). This experiment will involve measuring liquid quantities with a beaker, 2 graduated cylinders, and a burette. The accuracy of these instruments will be compared.

To know more about experimental volume visit:

https://brainly.com/question/30788899

#SPJ1

The ideal monatomic molecule has three degrees of freedom, thus let N=the total number of molecules in each gas maintained at temperature T.

Hence, the monatomic gas's typical kinetic energy  E₁=(3/2) Nkt

, then its heat capacity at constant volume,

[tex]e1=\frac{3}{2} nKt[/tex]

. [k= Boltzman constant]

Similarly, for the diatomic gas

Cv₂=5/2Nk

as 5 degrees of freedom are available to a diatomic molecule.

Now, each of the gases receives a certain quantity of energy E in the form of heat. If T₁ and T₂ are the corresponding temperature increases, then

E=Cv₁T₁=Cv₂T₂,

or,

T₁/T₂=Cv₂/Cv₁ = 5/3

So,

T1>T2

this monatomic gas will be more heated.

To know more about Monoatomic here:

https://brainly.com/question/9384283

#SPJ4

The ratio of the final volumes is 1:1

The ratio of the final volume of the diatomic gas to that of the monatomic gas can be found using the ideal gas law, which relates pressure, volume, number of moles, and temperature:

PV = nRT

Where:

P = pressure

V = volume

n = number of moles

R = the gas constant

T = temperature

Since the gases are at the same temperature and have the same number of moles, their ratio of volumes will depend only on the ratio of their pressures.

Let's consider the monatomic gas first. Since the pressure is constant during heating, we can write:

P₁V₁ = nRT₁

After doubling the volume, the new volume is 2V₁, and we can write:

P₂(2V₁) = nRT₂

where P₂ is the new pressure and T₂ is the final temperature of the gas.

Dividing the second equation by the first equation, we get:

P₂(2V₁) / (P₁V₁) = nRT₂ / nRT₁

Canceling out n and rearranging the terms, we get:

P₂ / P₁ = (2V₁ / V₁) * (T₂ / T₁)

P₂ / P₁ = 2(T₂ / T₁)

Similarly, for the diatomic gas, we have:

P₃V₃ = nRT₁

P₄(2V₃) = nRT₂

Dividing the second equation by the first equation, we get:

P₄ / P₃ = (2V₃ / V₃) * (T₂ / T₁)

P₄ / P₃ = 2(T₂ / T₁)

Since both gases have the same number of moles and are heated at constant pressure, their initial pressures are the same (P₁ = P₃). Therefore, the ratio of the final pressures is:

P₂ / P₄ = (P₂ / P₁) * (P₃ / P₄) = 1 * (P₃ / P₄) = P₃ / P₄

Substituting the expressions we found for P₂ / P₁ and P₄ / P₃, we get:

P₃ / P₄ = (2(T₂ / T₁)) / (2(T₂ / T₁)) = 1

Therefore, the ratio of the final volumes of the diatomic gas to the monatomic gas is:

(2V₃) / (2V₁) = V₃ / V₁ = P₃ / P₁ = 1

So the ratio of the final volumes is 1:1. This means that both gases will occupy the same volume after being heated at constant pressure until their volume doubles, as long as they have the same number of moles and the same initial temperature.

To learn more about Monoatomic

https://brainly.com/question/29413691

#SPJ4

Since the enthalpy change is positive, this is an endothermic process.

An endothermic process is a chemical or physical process that absorbs heat from its surroundings. During an endothermic process, energy is transferred from the surroundings into the system, which results in a decrease in the temperature of the surroundings. This means that the system requires an input of energy in order to proceed.

Here,

To calculate the value of enthalpy change, we can use the formula:

ΔH = -q / n

Where:

q is the heat absorbed or released in the reaction

n is the number of moles of the solute (ammonium chloride)

We can calculate the heat released (q) in the reaction using the formula:

q = m × C × ΔT

Where:

m is the mass of the solution

C is the heat capacity of the Dewar flask

ΔT is the change in temperature of the solution

The mass of the solution can be calculated by converting the volume of water to mass, assuming a density of 1.00 g/mL:

m_solution = 100.0 mL × 1.00 g/mL = 100.0 g

The number of moles of ammonium chloride can be calculated using its molar mass:

molar mass of NH4Cl = 14.01 g/mol + 1.01 g/mol + 35.45 g/mol = 53.47 g/mol

n = 2.50 g / 53.47 g/mol = 0.0468 mol

The heat released can be calculated as:

q = 100.0 g × 1.76 J/g°C × (-8.00°C) = -1.41 × 10⁴ J

Substituting these values into the formula for ΔH, we get:

ΔH = -(-1.41 × 10⁴ J) / 0.0468 mol = 3.01 × 10⁵ J/mol

To know more about endothermic process,

https://brainly.com/question/8897369

#SPJ1

Answer:

Two electrons

The phenolate ion is a conjugate base of phenol and it appears colorless in its pure form. However, under acidic conditions, it can be protonated to form phenol, which is a colorless compound.

It is possible that the question is referring to the color of a compound that contains the phenolate ion and the changes color under acidic conditions. One example of such a compound is the phenolphthalein, which is a colorless in acidic solutions and appears pink in basic solutions.

In this case, the phenolate ion will not be visible under the acidic conditions as it will have been protonated.

The phenolate ion is an anion that is derived from phenol by the loss of a proton (H⁺). Phenol is an aromatic organic compound that has a hydroxyl (-OH) group attached to a benzene ring. In the presence of a base, such as sodium hydroxide (NaOH), phenol can lose a proton from the hydroxyl group, resulting in the formation of the phenolate ion.

To know more about phenol here

https://brainly.com/question/10361409

#SPJ4

In foreign nations where cholera is present, avoid consuming raw foods or water unless they are well-known to be safe or have undergone the necessary treatment (option b).

Antibiotics are drugs that treat bacterial illnesses in people and animals by either annihilating the bacteria or making it harder for them to develop and multiply. Germs are what bacteria are. They are everywhere in our bodies, both inside and outside, as well as in the surroundings.

Antibiotics frequently cause stomach pain, diarrhea, and nausea as side effects. Dehydration and other issues can sometimes result from these symptoms. Inquire of your doctor on possible antibiotic side effects and drug interactions.

To know more about Antibiotics visit:

https://brainly.com/question/10868637

#SPJ1

Nucleic acids are biological macromolecules that are responsible for storing and transmitting genetic information in cells. There are two main types of nucleic acids: deoxyribonucleic acid (DNA) and ribonucleic acid (RNA).

These molecules are composed of a chain of monomers called nucleotides, which are made up of three components: a sugar, a phosphate group, and a nitrogenous base.

The nitrogenous base is a key component of nucleotides and is responsible for the genetic information that is encoded in nucleic acids. There are five nitrogenous bases that are found in nucleic acids: adenine (A), guanine (G), cytosine (C), thymine (T), and uracil (U). Adenine and guanine are purine bases, while cytosine, thymine, and uracil are pyrimidine bases.

In DNA, the nitrogenous bases are adenine, guanine, cytosine, and thymine. These bases pair up in a specific way, with adenine always pairing with thymine and guanine always pairing with cytosine. This pairing is important because it allows DNA to replicate itself and transfer genetic information from one generation of cells to the next.

In RNA, the nitrogenous bases are adenine, guanine, cytosine, and uracil. RNA is similar to DNA in that it is composed of a chain of nucleotides, but it is usually single-stranded and is involved in the translation of genetic information into proteins.

The structure of nucleic acids is crucial for their function in storing and transmitting genetic information. The specific arrangement of the nitrogenous bases determines the genetic code that is encoded in the nucleic acid. The sequence of bases in a nucleic acid is unique to each individual and is responsible for the genetic diversity that is seen in all living organisms.

In summary, the elements found inside nucleic acids are nitrogenous bases, which include adenine, guanine, cytosine, thymine, and uracil. These bases are crucial for the function of nucleic acids in storing and transmitting genetic information in cells. The specific arrangement of these bases determines the genetic code that is encoded in nucleic acids and is responsible for the genetic diversity seen in all living organisms.

To know more about Nucleic acids: https://brainly.com/question/11309892

#SPJ4

The transition metals are elements that have partially filled d subshells in their atoms or ions. Option D is correct.

These elements are located in the middle of the periodic table and include elements from group 3 to group 12. They are called "transition" metals because they are located in between the highly reactive metals on the left-hand side of the periodic table and the less reactive metals on the right-hand side.

The d subshells can hold up to 10 electrons, and the transition metals have varying numbers of electrons in their d subshells. This partially filled d subshell is what gives the transition metals their characteristic chemical and physical properties, such as their ability to form colored compounds and to act as good catalysts.

Hence, D. d subshells is the correct option.

To know more about transition metals here

https://brainly.com/question/29828769

#SPJ4

--The given question is incomplete, the complete question is

"The transition metals are elements with partially filled: A) p subshells B) s subshells C) f subshells D) d subshells"--

The items needed to run the spectrophotometry experiment are the  Spectrophotometer , Blank solution , Sample solution , Cuvette , Stir bar. The correct options are A, C, D, E, F.

The Spectrophotometry is the standard and the inexpensive technique to measure the light absorption or the amount of the chemicals in the solution. It uses the light beam which will passes through the sample, and the each compound in the solution will absorbs or it will transmits light over the  certain wavelength.

This technique is the powerful because the certain compounds will absorb the different wavelengths of the light at the different intensities. Blank solution , Sample solution , Cuvette , Stir bar are the otems used in the spectrophotometry experiment.

To learn more about Spectrophotometry here

https://brainly.com/question/21578855

#SPJ4

True. Resonance occurs when the formal charges of all atoms in the molecule remain the same.

Resonance occurs when the formal charges of all atoms in a molecule are the same. This means that electrons are shared between atoms in the molecule, resulting in a stabilizing effect. A change in the formal charges would disrupt the resonance and consequently, the stability of the molecule. The electrons must move in such a way that the formal charge of each atom is conserved. This way, energy is minimized and the molecule is stabilized. Without the same formal charge, the resonance would not be able to occur and the molecule would not be stable. In conclusion, resonance can only occur when the elements in the molecule keep the same formal charge, otherwise, the molecule will not be stable.

Learn more about Resonance here:

https://brainly.com/question/28318319

#SPJ4

Learn more about resonance  here:

https://brainly.com/question/29547999

#SPJ4

True. Resonance occurs when the formal charges of all atoms in the molecule remain the same.

Resonance occurs when the formal charges of all atoms in a molecule are the same. This means that electrons are shared between atoms in the molecule, resulting in a stabilizing effect. A change in the formal charges would disrupt the resonance and consequently, the stability of the molecule. The electrons must move in such a way that the formal charge of each atom is conserved. This way, energy is minimized and the molecule is stabilized. Without the same formal charge, the resonance would not be able to occur and the molecule would not be stable. In conclusion, resonance can only occur when the elements in the molecule keep the same formal charge, otherwise, the molecule will not be stable.

To know more about Resonance:

brainly.com/question/28318319

#SPJ4

Bio1613 Principles of Nutrition is an introductory course that explores the scientific basis for nutrition and its implications for health, illness, and well-being. The course focuses on the biochemical, physiological, and metabolic aspects of nutrition, including vitamins, minerals, fat, carbohydrate, and protein metabolism.

FCS1253 Principles of Nutrition is more focused on the practical application of nutrition. This course looks at the components of a well-balanced diet, as well as nutrition education and guidelines tailored to specific populations. The course also covers nutrition misconceptions, dietary recommendations, and the role of food in health promotion. Additionally, students will gain an understanding of current dietary trends, food labeling, and the potential consequences of improper nutrition.

To learn more about Nutrients:

https://brainly.com/question/30568687

#SPJ4

The number tab on the Format Cells dialog box will enable her to display the total percentage symbol in the spreadsheet.

A spreadsheet is a computer program that can capture, display and manipulate data arranged in rows and columns. One of the most used tools for personal computers is spreadsheets. In general, a spreadsheet is made to store numerical data and short text strings.

To change the formatting of cell numbers in Excel without changing the actual number, use the format cells function. We can modify the number, alignment, font style, border style, fill options, and protection with the aid of the format cells.

A spreadsheet is a tool for storing, modifying, and analyzing data. A spreadsheet's rows and columns of data can be searched, sorted, calculated from, and utilized to create a variety of graphs and charts.

To know more about the spreadsheet visit;

https://brainly.com/question/30458965

#SPJ1

The part of a synapse to which the contents of synaptic vesicles bind is called the "postsynaptic receptor".

The neurotransmitters diffuse across the synaptic cleft and bind to specific receptor proteins on the postsynaptic neuron, located on the postsynaptic membrane of the synapse. The binding of the neurotransmitters to the receptor proteins triggers a response in the postsynaptic neuron, which can lead to the generation of an action potential and the transmission of the signal to the next neuron in the neural circuit.

The postsynaptic receptors are specific to different neurotransmitters, and the binding of a neurotransmitter to its corresponding receptor can have either an excitatory or inhibitory effect on the postsynaptic neuron, depending on the receptor type and the characteristics of the neurotransmitter. The postsynaptic receptors are an important component of neural communication, and their function is critical for the proper functioning of the nervous system.

For such more question on vesicles:

https://brainly.com/question/201877

#SPJ4

Answer:

The number of moles of oxygen gas used when 19.04 grams of methane is burned is 2.38 mol O2.

Explanation:

To answer this question, we need to use the balanced chemical equation provided and the given mass of methane to determine the number of moles of oxygen gas used.

First, we need to calculate the number of moles of methane present in 19.04 grams of CH4:

Number of moles of CH4 = mass of CH4 / molar mass of CH4

= 19.04 g / 16.04 g/mol

= 1.19 mol

Next, we can use the stoichiometric coefficients from the balanced equation to determine the number of moles of oxygen gas required to react with the 1.19 mol of CH4:

1 mol CH4 + 2 mol O2 → 1 mol CO2 + 2 mol H2O

From this, we can see that 1 mole of CH4 reacts with 2 moles of O2. Therefore, we can calculate the number of moles of O2 required as follows:

Number of moles of O2 = 1.19 mol CH4 x (2 mol O2 / 1 mol CH4) = 2.38 mol O2

Therefore, 19.04 grams of methane will react with 2.38 moles of oxygen gas.

Note: It's important to specify the substance and units in the answer, as requested.

The electronegativity difference between carbon and oxygen atoms is 3.44 - 2.55 = 0.89. The type of bond forms between carbon and oxygen is polar covalent bond.

According to the Pauling electronegativity scale, a difference in electronegativity of less than 1.7 indicates a polar covalent bond. Therefore, carbon and oxygen form a polar covalent bond in most cases, where the oxygen atom has a partial negative charge and the carbon atom has a partial positive charge.

This polarity in the bond arises because oxygen is more electronegative than carbon, and attracts electrons more strongly than carbon does, resulting in unequal sharing of electrons between the two atoms.

To know more about electronegativity here

https://brainly.com/question/17762711

#SPJ4

The development of positive charge on carbon rod and negative charge on zinc causes development of voltage difference.

The voltage difference in any electrochemical reaction arises due to difference in charges on each side, which is further ascertained by the presence of electrons. Here we see that carbon rod becomes positively charged on flow of electrons while zinc rod becomes negatively charged.

The dry cell here indicates lack of acid in the cell. However, the replaced liquid here is moist electrolyte. Now the deposition of charged on each side on further connection with leads from outer side results in flow of electron and hence current is generated.

Learn more about dry cell -

https://brainly.com/question/23880282

#SPJ4