Write a program to find the Perimeter and Semi- perimeter of a traingle.(Python)

By corrupting files, wiping off your hard disk, and/or granting hackers access, malicious programs can cause harm.

Malicious code can enter network drives and spread once it has already entered your environment. By sending emails, stealing data, stealing passwords, destroying document files, email files, or passwords, malicious malware can also overwhelm networks and mail servers. It can even format hard drives.

The term "malicious code" refers to damaging computer programming scripts used to find or exploit system weaknesses. This code was created by a threat actor to alter, harm, or continuously access computer systems.

To know more about  malicious code  visit:-

https://brainly.com/question/26256984

#SPJ4

The total number of comparisons, therefore, is (n - 1) + (n - 2)... (2) + (1) = n(n - 1)/2 or O(n2). The list should already be sorted or be almost sorted before using bubble sort.

Describe bubble sort using an example.

A form of sorting technique you can use to place a group of data in ascending order is called a bubble sort. To order the values in descending order, you may alternatively use bubble sort. The alphabetical order of the contacts in your phone's contact list is a practical illustration of a bubble sort algorithm.

The bubble sort is a straightforward method for placing a series of numbers or other items in the proper order.

Know more about  technique  Visit:

https://brainly.com/question/30078437

#SPJ4

It employs n comparisons in the worst case, n comparisons in the average case, n comparisons in the best case, n swaps in the worst case, and n swaps in the average case is true about Bubble Sort.

Bubble Sort is the simplest sorting technique; if close components are sorted incorrectly, it continuously changes them. Due to its high average and worst-case time complexity, this method should not be employed with large data sets.

Quicksort's temporal complexity has best, average, and worst cases that are, respectively, O(n log n), O(n log n), and O(n log n). But because it performs at the highest level in quicksort is typically regarded as the "fastest" sorting algorithm since it is the average case for the majority of inputs.

To know more about Bubble Sort visit:-

https://brainly.com/question/13161938

#SPJ4

Every time two computing devices communicate with one another online, it is used. The location and identification of the network interface are the two primary purposes of an IP address.

A computer network that uses the Internet Protocol for communication is identified by its IP address, which is a numeric label. An example of such an IP address is 192.0.2.1. addressing.

It manages to address and routing for all Internet communication. The protocol explains how IP addresses are used to uniquely identify devices connected to the Internet. Internet-connected devices require an IP address in order to receive messages, much like residences require a mailing address to receive mail.

Internet Protocol is the procedure or method used to transport data from one computer to another over the internet (IP). A host, or a computer connected to the internet, is identified by at least one IP address that sets it apart from all other computers there.

To learn more about IP address click here:

brainly.com/question/29345454

#SPJ4

CISSP — The First Certification — 1994 was founded, and the Certified Information Systems Security Professional (CISSP) certificate and first test were introduced by (ISC)2.

A non-profit organisation that focuses in providing cybersecurity experts with training and credentials is called the International Information System Security Certification Consortium, or (ISC)2. The "biggest IT security group in the world" is how some have referred to it.

The International Information Systems Security Certification Consortium, generally known as (ISC)2, founded the CISSP (Certified Information Systems Security Professional) as a professional information security credential in 1988. For those who work in information security, the CISSP is a recognised standard worldwide.

To know more about CISSP visit :-

https://brainly.com/question/29858480

#SPJ4

Answer:

A. Expansion slots

Explanation:

An expansion slot is a connection or port within a computer on the motherboard or riser card that allows users to expand their systems. It is also known as a bus slot or expansion port

The files and folders at the target that are no longer present at the source will be deleted by the robocopy /purge windows command.

Microsoft created the operating system called Windows. You are only able to utilise a computer thanks to the operating system. Windows is the most widely used operating system on the planet since it comes preloaded on the majority of new personal computers (PCs).

Microsoft created and distributes a number of proprietary graphic operating system families under the name Windows. Every family caters to a specific sector of the computing industry.

To know more about  windows visit:

https://brainly.com/question/13502522

#SPJ4

Programming paradigms make programs less complex. When writing their code, every programmer must use a paradigm approach.

Because they specify a computer language's functionality, paradigms are crucial. A paradigm can be viewed as a set of concepts that a programming language can utilize to carry out operations at a much higher level than what would be possible using machine-code.

In order to create expectations about what would probably happen based on these assumptions, paradigms are quite useful. Unfortunately, we find it challenging to recognize and accept the data when it contradicts our paradigm.

To know more about programming  visit:-

https://brainly.com/question/29674300

#SPJ4

The timing of transition slides per minute can vary depending on the content and pace of the presentation.

A slide transition is the visual effect that happens as you switch from one slide to the next during a presentation. The pace, sound, and appearance of transition effects can all be adjusted.

Depending on the presentation's content and pacing, the number of transition slides every minute may change.

It is advised to keep the presentation's pace at roughly 1-2 minutes each slide as a general rule.

As a result, if your presentation lasts for 10 minutes, you should aim for 5–10 slides.

But, it's crucial to put the presentation's flow first and to refrain from speeding or dragging out slides in order to stick to a strict time limit. The timing of transition slides should ultimately be changed to better serve the presentation's content and purpose.

Thus, this is the timing of transition slides be per minute.

For more details regarding transition slide, visit:

https://brainly.com/question/19217934

#SPJ9

On the Database Tools tab, in the Relationships group, click the Relationships button.

Double-click the line connecting the Departments and Staff tables.

Click the Cascade Delete Related Records check box.

Click OK.

Die casting is a type of moulding where molten metal is injected into a split mould die at high pressure and speed. Also known as pressure die casting.

A specified quantity of molten metal alloy is poured into a heated, greased die, then forged and solidified under pressure. This method is known as squeeze casting, sometimes known as liquid forging, and combines permanent mould casting with die forging in one operation.

to know more about metal here:

brainly.com/question/28650063

#SPJ4

Digital forensics is a subfield of forensic science that focuses on finding, obtaining, processing, analysing, and documenting electronically stored data.

The FBI Labs and other law enforcement organisations started to create software to look at digital evidence as early as 1984. The FBI created the Computer Analysis and Response Team in order to effectively respond to the increasing demands of investigators and prosecutors in a systematic and programmatic manner (CART).

Software programmes known as "digital forensic tools" are used to extract, identify, and document computer evidence for judicial proceedings. The digital forensic process is simplified and made easier with the use of these technologies. In-depth reports for legal procedures are also provided by these instruments.

To know more about Digital forensics visit :-

https://brainly.com/question/29349145

#SPJ4

The correct answer is Seismographs from at least three separate locations are required in order to pinpoint the epicentre of an earthquake.

But, certain groups, like the Quake-Catcher Network, can use household size detectors built into computers to detect earthquakes as well. These seismometers are frequently used as part of a big scale governmental or scientific effort. Computers, stereos, TVs, and other small gadgets that are frequently placed on desks, tables, and worktops are easily moved by the shocks that even tiny earthquakes create. If they stumble, they can sustain irreparable injury. By turning seismic wave vibrations into electrical signals that may be shown as seismograms on a computer screen, seismometers enable the detection and measurement of earthquakes. Seismologists do research on earthquakes and can utilise this information to pinpoint the location and magnitude of a specific earthquake.

To learn more about earthquake click on the link below:

brainly.com/question/29500066

#SPJ4

Answer: The symbol ≈ means approximately equal to.

Explanation: I hope this helps!

HTML seems to be the title of the dialect used to explain where Web pages are organised. The best choice is c).

JavaScript runs in the internet while Python is still a backend server-side language, rendering JavaScript obviously greater to Python for website development. Python can help to build websites, but it can't do everything on its own.

The justification is that JavaScript is more difficult to learn than Python. Python is usually the language of choice for novices, particularly those who have no prior programming expertise. Python code is renowned to be more readable, which makes it simpler to comprehend (and write).

To know more about JavaScript visit :

https://brainly.com/question/30523170

#SPJ4

If your writing is similar to content in our database, the free Turnitin plagiarism checker will alert you.

Turnitin is a service that checks for originality and prevents plagiarism. It looks for citation errors and inappropriate copying in your writing. Turnitin compares your paper to text from its vast database of student work, websites, books, articles, and other sources when you submit it.

Reality: Turnitin does not assign grades to students but rather matches text similarity. The instructor and/or student are responsible for determining whether the assignment demonstrates plagiarism.

To know more about database visit :-

https://brainly.com/question/30634903

#SPJ4

The main reason for the discrepancy between 4.7 GB and 4.38 GB is the difference in measurement systems.

Discrepancy is a difference or disagreement between two or more facts, figures, accounts, or opinions. It can also refer to the lack of consistency between two or more facts, figures, accounts, or opinions.

The DVD manufacturer measures capacity in the decimal system, while the OS measures capacity in the binary system. In the decimal system, 1 GB is equal to 1,000,000,000 bytes, while in the binary system, 1 GB is equal to 1,073,741,824 bytes. This means that the actual capacity of the DVD is 4.7 GB, but the OS requires overhead to manage the DVD and the overhead is not included in the reported DVD capacity. Therefore, the reported capacity will be lower than the advertised capacity. Additionally, the DVD can be formatted to have a higher capacity, up to the advertised 4.7 GB. The manufacturer can therefore advertise the DVD as having a capacity of 4.7 GB, even though the OS will report the capacity as 4.38 GB.

To learn more about discrepancy
https://brainly.com/question/20292126
#SPJ1

If you are receiving this message, it means that your organization has a policy in place that does not allow granting permissions to users at a certain level.

Organization is a structured system of operations which is designed to achieve specific objectives. It is a collective effort of individuals, working together to achieve a common goal. Organization involves setting up a plan for the use of resources, such as people, money, and materials, in order to reach the desired objectives. This includes designing processes and procedures, and establishing rules and regulations.

Organization also involves setting up a hierarchy of authority and responsibility, assigning roles and tasks to individuals, and monitoring the performance of people and groups. Effective organization requires clear communication, coordination and cooperation between different individuals and teams, and an understanding of the goals and objectives of the organization. It also requires the ability to make decisions, solve problems and adapt to changing conditions.

To learn more about Organization https://brainly.com/question/12947584

#SPJ4

2023 Sentra's will start to assist feature that holds the brakes on a hill for approximately 2 seconds or until the accelerator pedal is pressed.

The process of holding the brakes has described the strategy which is generally used to inhibit or reduce the speed of any vehicle. The function of holding brakes is to retain loads.

In contrast to control brakes or stopping brakes, which delay moving masses, and power brakes, which generate a counter torque for drive assemblies. Holding brakes are typically intended in order to stop shafts from starting up from a standstill.

Therefore, the 2023 Sentra will start to assist feature that holds the brakes on a hill for approximately 2 seconds or until the accelerator pedal is pressed.

To learn more about Holding brake, refer to the link:

https://brainly.com/question/28142507

#SPJ1

No, it is not 0 bytes after a block of size Alloc D. This is because Alloc D is a memory block size allocated by the operating system.

This means that the block size is set to a predetermined size, and any additional bytes needed to store the data will be added to the end of the block. Therefore, there are a few bytes after the block of size Alloc D.

Therefore, there are a few bytes after the block of size Alloc D. These extra bytes are used to store data that is in excess of the default block size. This ensures that all data is stored safely and without problems.

These extra bytes can also contain control information, such as the memory address where the block is located, the size of the block, etc. These dates

Lear More About 0 bytes

https://brainly.com/question/28235713

#SPJ11

The tee command enables you to simultaneously output to the screen and write the same data to a file.

Command and example are what?

'Imperative verbs' are the building blocks of command words. When they give instructions, these are also referred to as "bossy verbs." For instance, the command "Eat your food" employs the verb eat in the imperative form. A statement is considered to be an imperative when an imperative verb is present. A command is a statement that instructs the subject to perform a specific action. Exclamations, questions, and statements are the other three sentence types. Because they order someone to take action, command sentences typically but not always begin with an imperative (bossy) verb.

Know more about  simultaneously   Visit:

https://brainly.com/question/29672492

#SPJ4

True, when you add a video to a slide, the video tools contextual tabs display.

The video tools contextual tabs typically include a range of features for working with video content, such as playback controls, editing options, and formatting tools. Some common features include the ability to trim or crop the video, adjust the volume or playback speed, add captions or subtitles, and apply effects such as artistic filters or transitions.

What are some best practices for adding videos to a presentation?

When adding videos to a presentation, it is important to consider the audience, the purpose of the presentation, and the technical requirements of the video format and playback software. Some best practices for adding videos to a presentation include compressing the video to reduce file size, testing the video playback in advance, ensuring that the audio is clear and at an appropriate volume, and using visual cues or text to supplement the video content as needed. Additionally, it is important to follow copyright laws and obtain permission or licensing for any copyrighted videos used in the presentation.

Learn more about video tools here:

brainly.com/question/5578301

#SPJ4

The Center for Internet Security is the company that provides free benchmarking software for Linux and Windows (CIS). CIS offers standards that were created by a group of cybersecurity professionals.

Rootkits are particularly difficult to detect because they can hijack or subvert security software, which makes it possible that this kind of malware could survive on your computer for a long time and cause serious harm.

Accounting. The operating system's service maintains track of which users are using what resources—and how much—for accounting purposes as well as to compile consumption data.

to know more about Windows and Linux here:

brainly.com/question/14639136

#SPJ4

A light brown background typically refers to a background color that is a pale or muted shade of brown.

Technology refers to the set of tools, techniques, and processes that are used to create, develop, and operate various products, services, and systems to solve problems, improve efficiency, and enhance human life. Technology can be divided into various categories such as information technology, biotechnology, nanotechnology, energy technology, and many more. Technology has a profound impact on society, as it has led to the creation of numerous innovations, such as smartphones, computers, the internet, medical advancements, and transportation, that have transformed the way people live and work. Technology is continually evolving and advancing, and its development is driven by scientific research, engineering, and innovation.

Here,

Light brown backgrounds can be used in a variety of design contexts, such as in web design, graphic design, and interior design. They can provide a warm and inviting backdrop for other elements, such as text or images, and can be used to create a natural or organic feel.

In some cases, light brown backgrounds may be used to evoke a sense of nostalgia or vintage charm, particularly if the shade of brown is reminiscent of old photographs or other vintage materials. They may also be used to create a sense of depth or texture, particularly if the brown color has a slight gradient or other subtle variations.

To know more about technology,

https://brainly.com/question/9171028

#SPJ4

To use a vector erase in C++, you need to specify the position of the element you want to erase. The "erase" function can be used to remove a single element or a range of elements from a vector. Here's how you can use the "erase" function:

```cpp
#include
#include

int main() {
   // Create a vector
   std::vector myVector {1, 2, 3, 4, 5, 6};

   // Erase the second element
   myVector.erase(myVector.begin() + 1);

   // Print the vector
   for (int i = 0; i < myVector.size(); i++) {
       std::cout << myVector[i] << " ";
   }

   return 0;
}
```

This will output: 1 3 4 5 6

You can also specify a range of elements to erase:

```cpp
myVector.erase(myVector.begin() + 2, myVector.begin() + 4);
```

This will erase the third and fourth elements from the vector.

For more information about C++, visit:

https://brainly.com/question/28959658

#SPJ11

Email is sent and received using SMTP. It can occasionally be combined with POP3 or IMAP.

E- mail or electronic mail is a technology for sending messages across computer networks by electronic devices. The term "email" can apply to both the method of delivery and the specific messages that are sent & received. Rapid email message exchange is made possible via a global email network.

Describe flexibility?

This system's versatility is a benefit. Additional instances. The criteria were set up to provide judges more latitude when making judgements. Increased range of motion and improved, more functional movement are both benefits of good flexibility. striving

To know more about email visit :

brainly.com/question/14666241

#SPJ4

Note that the code that executes as descried above is:

function pendingTasks = RemoveTasks(pendingTasks)

pendingTasks([2, 4, 6]) = [];

end

% Code to call the function

pendingTasks = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10];

pendingTasks = RemoveTasks(pendingTasks);

The above response provides a function in MATLAB that removes specific elements (2, 4, and 6) from a given array of task IDs.

The function accomplishes this by using the indexing feature of MATLAB to remove the specified elements from the array. The function can be called with a given array of task IDs, and the modified array with the specified elements removed is returned.

Learn more about Codes:
https://brainly.com/question/14461424
#SPJ1

Branding, design, usability, and function are just a few of the aspects of product acquisition and integration that a UX designer is interested in.

In user-centered design, the user is prioritized. UX designers must comprehend, specify, design, and assess throughout the design process in order to do this.

These prototypes are made by UX designers to closely resemble the anticipated final product in terms of appearance, functionality, and variety of features. Test consumers can engage with clickable prototypes, allowing UX designers to try out realistic variations of the experience and pinpoint areas for improvement.  

To know more designer visit:-

https://brainly.com/question/28486317

#SPJ1

The alignment size of a struct is the size of the largest data type contained in the struct. This is also known as the struct's alignment requirement.

The alignment requirement is used to ensure that the struct's members are aligned properly in memory, which can improve performance and prevent data corruption. For example, if a struct contains a char, an int, and a double, the alignment size of the struct would be the size of the double (8 bytes), since it is the largest data type in the struct. This means that the struct's members will be aligned on 8-byte boundaries in memory.

It is important to note that the alignment size of a struct can also be affected by compiler-specific settings and directives. For example, some compilers allow you to specify a custom alignment size for a struct using the #pragma pack directive.

In general, the alignment size of a struct is an important consideration when working with data structures in C and C++, as it can affect the performance and correctness of your code.

Learn more about struct alignment: https://brainly.com/question/28179317

#SPJ11

Agile is the software development methodology that is more appropriate when user specifications are unclear or constantly changing.

Agile is a software development methodology that emphasizes flexibility, collaboration, and rapid iterations to deliver software products. This approach is well-suited to situations where user specifications are unclear or changing frequently.

Agile development involves breaking down the development process into small, manageable chunks called sprints. Each sprint typically lasts two to four weeks and involves a cross-functional team of developers, designers, and other stakeholders working together to deliver a small, working piece of software.

Agile methodology is characterized by constant feedback and communication between team members and stakeholders, which enables the team to quickly adapt to changing requirements and feedback. This means that if user specifications are unclear or constantly changing, Agile development can be a good fit because it allows for rapid iterations and updates to the product based on feedback and user needs.

In contrast, the Waterfall methodology is a more rigid, linear approach to software development that requires a detailed plan and a fixed set of requirements upfront. This approach can be problematic if user needs are unclear or constantly changing, as it can be difficult to make changes mid-project without affecting the entire development process.

Learn more about Agile methodology here:

https://brainly.com/question/13104828

#SPJ4

The main functions of gateway firewalls are to establish virtual connections and restrict access to private IP addresses. Using their TCP handshakes, stateful firewalls maintain track of connections, creating a state table.

Stateful firewalls are able to track and protect depending on traffic patterns and flows by monitoring and identifying states of all traffic on a network. Nevertheless, stateless firewalls only concentrate on a single packet, utilising pre-defined rules to filter traffic.

An application called a personal firewall regulates network traffic to and from a computer, allowing or prohibiting communications in accordance with a security policy. As an application layer firewall, it usually functions.

To know more about IP addresses visit:-

https://brainly.com/question/16011753

#SPJ4