A student mixes 10.0mL of 1.5 x 10-4 M AgNO3 with 2.0 mL of 5.0 x 10-4 M NaBr and stirs the resulting mixture. Will the student observe a precipitate

The final temperature of the water is 308 K.

To find the final temperature of the water, we need to use the formula Q = mcΔT, where Q is the heat transferred, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature. The heat lost by the iron will be equal to the heat gained by the water, so we can set the equations equal to each other and solve for the final temperature.

  Qiron = Qwater

Heat lost by iron:

  Q = iron mass x specific heat of iron x temperature of iron

      = 25 x 0.449 x (398 - T)

Heat gained by water:

  Q = water mass x specific heat of water x temperature of water

      = 25 x 4.18 x (T - 298)

Since heat lost = heat gained, therefore:

  25 x 0.449 x (398 - T) = 25 x 4.18 x (T - 298)

                        115.725T = 35608.55

                                    T = 308 K

Learn more about heat lost and gained at https://brainly.com/question/4002926

#SPJ11

Answer:

The atomic mass of sodium is 23 g/mol

Explanation:

Sodium's atomic mass is 11 + 12 = 23. As a result, 1 mole of sodium equals 23 grams. We know that because sodium's atomic mass is 23, we can write it as 23 g/mol.

Answer:

Three properties of covalent bonds are low melting and boiling points, softer than ionic bonds, don't dissolve well in the water.

Three properties of ionic bonds are high melting as well as boiling points, hard and brittle in nature and conduct electricity when dissolved in water.

About 100 million years ago, in South America, marsupials first appeared. Australia, Antarctica, and South America were all connected at the time to form one large continent. Australia and Antarctica gradually separated from South America and developed into independent continents.

Why is marsupials more in Australia than South America ?

The diversity of marsupials is thought to be higher in Australia than in South America because there were no terrestrial placental mammals there in prehistoric Australia to compete with marsupials. The only other large mammal that uses hopping as its main mode of propulsion is the kangaroo.

To know more kangaroo, visit :

brainly.in/question/10247956

#SPJ1

A. The reaction will shift toward the products (Right).

In the given system, the forward reaction is represented by the equation 2NO(g) + O2(g) ⇌ 2NO2(g) + 113.06 kJ

When NO gas is added to the container, it increases the concentration of one of the reactants. According to Le Chatelier's principle, if there is a change in the conditions of a system at equilibrium, the system will adjust to counteract that change.

In this case, adding more NO gas increases its concentration. To counteract this increase, the system will shift in the direction that reduces the concentration of NO, which is the reactant.

The system will shift towards the products (right) to consume some of the additional NO, in order to restore equilibrium.

Learn more about equilibrium at:

https://brainly.com/question/30807709

#SPJ2

The number of grams sodium oxide required to produce 160 grams of NaOH is 123.96g.

Stoichiometry refers to the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, sodium oxide reacts with water to produce sodium hydroxide.

160 grams of NaOH is equivalent to 4 moles

Based on the above equation, 1 mole of sodium oxide produces 2 moles of sodium hydroxide.

4 moles of sodium hydroxide will require 2 moles of sodium oxide.

2 moles of sodium oxide is equivalent to 123.96g

Learn more about mass at: https://brainly.com/question/9743981

#SPJ1

The nonmetallic elements from the list are: Oxygen, Boron, Argon and Carbon. Option B, C, E, and G will be correct.

Nonmetallic elements are elements that generally lack metallic properties such as luster, malleability, ductility, and electrical conductivity. They are located on the right side of the periodic table, except for hydrogen, which is located on the top left corner.

Nonmetals have different physical and chemical properties, but some of their common characteristics include: They are poor conductors of heat and electricity.

They are typically brittle solids or gases at room temperature, except for bromine, which is a liquid.

They have low melting and boiling points compared to metals.

Nonmetallic elements play important roles in various chemical reactions and are essential to life, such as oxygen and carbon.

Hence, B.C.G.E. Oxygen, Boron, Argon and Carbon are the correct options.

To know more about nonmetallic elements here

https://brainly.com/question/29524372

#SPJ4

Chemical combination refers to the ability of matter to react with other substances and form new compounds.

Atoms, which are the basic units of matter, can combine with each other through various chemical bonds to form molecules. These molecules can then react with other molecules to form new compounds with different properties.

The ability of matter to combine chemically is determined by the electron configuration of the atoms. Atoms with incomplete electron shells tend to be more reactive and can easily form chemical bonds with other atoms. This ability to form chemical bonds allows for the formation of complex molecules and compounds, which are essential for life and many technological advancements.

Chemical combination plays a critical role in various fields such as medicine, agriculture, and materials science. Understanding the principles of chemical combination can help us design new molecules and compounds with desired properties and functions, leading to the development of new technologies and products.

Learn more about compounds:

brainly.com/question/13516179

#SPJ4

109.5

when we see it in 3d dimension...the repulsion force of the bonding pairs maximaze the distance from each other, thus making the angle 109.5

Answer:

S = 34

Se = 34

Br = 35

I = 53

Explanation:

S is sulphur which is has 16 atoms

Se is selenium which has 34 atoms

Br is bromine which has 35 atoms

I is iodine which has 53 atoms

ClO[tex]_2[/tex], H[tex]_2[/tex]O are the polar covalent compounds, since all of these chemicals have a dipole moment.

Polar covalent compounds are electrical conductors. Polar compounds comprise chemical compounds held together through polar covalent bonds.

A polar compound is a chemical species that has two or even more atoms that are linked together by polar covalent bonds that share electrons irregularly. ClO[tex]_2[/tex], H[tex]_2[/tex]O are the polar covalent compounds, since all of these chemicals have a dipole moment.

Therefore,  ClO[tex]_2[/tex], H[tex]_2[/tex]O are the polar covalent compounds.

To know more about polar covalent compound, here:

https://brainly.com/question/30420584

#SPJ1

Answer:

The given balanced equation is not relevant to the conversion of 6.94 mol Na2SO4 to the mass of NaOH. However, we can use stoichiometry to calculate the amount of NaOH required to react with 6.94 mol of Na2SO4.

From the balanced equation, we can see that 1 mole of Na2SO4 reacts with 2 moles of NaOH. Therefore, we can calculate the number of moles of NaOH required as follows:

Number of moles of NaOH = 6.94 mol Na2SO4 x (2 mol NaOH / 1 mol Na2SO4) = 13.88 mol NaOH

Now, we can use the molar mass of NaOH to calculate the mass of NaOH required:

Mass of NaOH = number of moles of NaOH x molar mass of NaOH

= 13.88 mol NaOH x 40.00 g/mol NaOH

= 555.20 g NaOH

Therefore, 6.94 mol of Na2SO4 requires 555.20 g of NaOH to react completely.

Note: It's important to specify the substances and units in the answer, as requested.

The Bromocresol green indicator will change colors, this will detect the endpoint of the titration of the Borate ion with HCl

Correct option: c

A typical laboratory technique for quantitative chemical analysis to ascertain the concentration of a recognized analyte is titration. A reagent, also known as a titrant or titrator, is created as a standard solution with a specified volume and concentration. Titration, sometimes referred to as titrimetry, is a method for calculating the concentration of a specific analyte in a mixture that is used in chemical qualitative analysis. Titration, which is also sometimes referred to as volumetric analysis, is a crucial analytical chemistry method.

The Bromocresol green indicator will change colour.

The reaction becomes:

B₄O₇⁻² + 2HCl → H₃BO₃ + NaCl

(Borate)              (weak acid)

At the end point a weak acid of H₃BO₃ formed as a resultant solution, which is acidic in nature. Bromocresol green indicator have the pH range 3.8 - 5.4. So, at the end point solution changes colour blue to yellow.

Thus, correct option: c

To know more about indicator refer to:

https://brainly.com/question/1918667

#SPJ1

The reaction of benzaldehyde with acetone and sodium hydroxide produces dibenzylideneacetone. This is an example of a condensation reaction, specifically a crossed aldol condensation.

In this reaction, benzaldehyde and acetone undergo a nucleophilic addition reaction with the strong base sodium hydroxide. The sodium hydroxide deprotonates the alpha-carbon of the carbonyl group in both benzaldehyde and acetone, creating nucleophilic enolate intermediates. The enolate of acetone then attacks the carbonyl group of benzaldehyde, forming an intermediate that subsequently loses a water molecule, leading to the formation of dibenzylideneacetone.

Dibenzylideneacetone is a yellow solid and is used as a UV absorber, as a flavoring agent, and in the preparation of fragrances. The crossed aldol condensation reaction is an important synthetic route to form α,β-unsaturated carbonyl compounds, which have numerous applications in organic chemistry.

Find out more about benzaldehyde

brainly.com/question/30725354

#SPJ4

When there is any visible tear in the gloves is a correct answer to the question.

It is important to replace gloves immediately if there is any visible tear or puncture, as this can compromise the integrity of the glove and expose you to harmful chemicals or pathogens.

When the gloves have been exposed to a solvent is also a correct answer, as solvents can degrade glove materials and compromise their ability to provide protection. It is important to replace gloves if they have been exposed to solvents to ensure that they provide adequate protection.

When you handle a new piece of glassware and When you mix two chemicals in the lab are not necessarily reasons to replace gloves. However, it is always important to follow the specific protocols and guidelines established by your lab to ensure safe handling of chemicals and materials.

Learn more about harmful chemicals here brainly.com/question/1229410

#SPJ4

The correct order of events for the hydrolysis of amide bonds by chymotrypsin is as follows:

1-Binding of substrate to properly position the scissile bond for cleavage

2-Attack by Ser 195 to give a tetrahedral intermediate

3-Attack by water, leading to the formation of a tetrahedral intermediate

4-Protonation by His 57 and then cleavage of the C-O bond release the N-terminal fragment

5-Protonation by His 57 and then cleavage of the C-N bond release the C-terminal fragment

Enzyme returns to initial state

First, the substrate binds to the chymotrypsin enzyme, positioning the scissile bond between the carbonyl carbon and the nitrogen atom in the amide bond for cleavage. Serine 195 in the enzyme's active site attacks the carbonyl carbon, forming a tetrahedral intermediate.

Next, a water molecule attacks the tetrahedral intermediate, breaking the bond between the nitrogen and carbonyl carbon atoms and forming another tetrahedral intermediate. This intermediate is then protonated by the imidazole group of histidine 57, resulting in the release of the N-terminal fragment.

Finally, the nitrogen lone pair electrons attack the carbonyl carbon, forming another tetrahedral intermediate. This intermediate is also protonated by histidine 57, resulting in the release of the C-terminal fragment and the return of the enzyme to its initial state.

Overall, this process involves a series of coordinated steps, with the enzyme and substrate interacting in a precise manner to facilitate the hydrolysis of amide bonds.

Find out more about hydrolysis of amide bonds

brainly.com/question/14932769

#SPJ4

The correct name for NO₂ is nitrogen dioxide.

NO₂ is a chemical compound composed of one nitrogen atom and two oxygen atoms. It is a reddish-brown gas with a pungent odor and is a major component of air pollution.

Nitrogen dioxide is an important intermediate in the formation of smog and acid rain in the atmosphere. It is also used as a reagent in the production of nitric acid, which is used in the production of fertilizers and explosives. Exposure to high concentrations of NO₂ can cause respiratory problems and contribute to the development of asthma and other lung diseases.

To know more about the NO₂, here

brainly.com/question/20291234

#SPJ4

Pure liquids and solids are not included in the equilibrium constant expression because their concentrations do not change significantly during the reaction and they do not affect the reaction quotient.

Pure liquids and solids are often ignored when writing the equilibrium constant expression because their concentrations remain constant and do not affect the equilibrium position. This is due to their very low vapor pressures compared to the gaseous reactants and products.

For example, in the reaction A(s) + B(g) ⇌ C(g) + D(l), the concentration of the liquid D remains constant and does not change the equilibrium position. Therefore, it is not included in the equilibrium constant expression.

In reactions involving aqueous solutions, the concentration of water is included because it can vary significantly and affect the equilibrium position.

Learn more about the equilibrium constant expression here: brainly.com/question/12504520

#SPJ4

The temperature when a liquid's vapour pressure equals the pressure of a gas above it is known as the boils point of the liquid. A temperature at which a liquid's vapour equals one atmosphere is considered the liquid's typical boiling point (760 torr).

The temperature at which a liquid's vapour pressure equals atmospheric pressure, which is typically 760 mm of Hg, is known as the boiling point of the a liquid.

The force that is applied to the sides of a closed bag when a chemical inside of it evaporates is known as vapour pressure in chemistry (converts to a gas). Use the Clausius-Clapeyron formula to determine the vapour pressure at a specific temperature: ln(P1/P2) = (Hvap/R)((1/T2) - (1/T1)

When the vapour pressure and air pressure are equal, boiling will happen. We refer to this as the boiling point. The liquid will be capable of spreading out and transform into gas with no external pressure.

Learn more about temperature here:

https://brainly.com/question/11464844

#SPJ4

The atomic number of the helium is the 2. The helium is place in the period 1 and the group 18 in the periodic table.

The Helium is the second element in the periodic table. Helium is  located in the period 1 and the group 18 in the periodic table. The group of the helium contains the noble gases that are the most chemically inert elements present in the periodic table. The each He atom contains the two protons and usually the two neutrons and the two electrons.

The atomic number of the helium is 2. Helium is the colorless, the odorless, the tasteless and the inert monatomic gas and the first element in the noble gas group in the periodic table. The boiling point of the helium is the lowest among all the elements in the periodic table.

To learn more about atomic number here

https://brainly.com/question/16858932

#SPJ4

The molar attenuation coefficient is a measure of how strongly a substance absorbs light at a particular wavelength. It is defined as the amount of absorbance per unit path length and concentration of a solution.

The molar attenuation coefficient (also known as molar absorptivity or extinction coefficient) is a measure of how strongly a substance absorbs light at a particular wavelength. It is defined as the amount of absorbance (A) per unit path length (l) and concentration (c) of a solution of a compound: ε = A / (l*c)

The molar attenuation coefficient has units of liters per mole per centimeter (L mol⁻¹ cm⁻¹ and is a measure of how efficiently a particular compound absorbs light at a specific wavelength. It depends on various factors, including the identity of the compound, the solvent, and the wavelength of the incident light.

The molar attenuation coefficient is commonly used in analytical chemistry to determine the concentration of a particular compound in a solution by measuring its absorbance at a specific wavelength using a spectrophotometer. The higher the molar attenuation coefficient of a compound, the more sensitive and accurate the analysis can be.

To know more about analytical chemistry, visit:https://brainly.com/question/29420545

#SPJ4

Answer:

Vitamin overdose occurs when a person ingests far more than the daily recommendation, for an extended period of time. Although the body can excrete excessive amounts of water-soluble vitamins such as vitamin C, it can retain fat-soluble vitamins such as vitamin A, which can be toxic.

The mass of 1 mol of KOH is 56.11 grams.

The molar mass of KOH (potassium hydroxide) can be calculated by adding the atomic masses of its constituent atoms. The chemical formula for KOH shows that it contains one potassium atom (K), one oxygen atom (O), and one hydrogen atom (H).

The atomic masses of potassium, oxygen, and hydrogen are 39.10 u, 16.00 u, and 1.01 u, respectively.

Therefore, the molar mass of KOH is:

Molar mass of KOH = atomic mass of K + atomic mass of O + atomic mass of H

Molar mass of KOH = (39.10 u) + (16.00 u) + (1.01 u)

Molar mass of KOH = 56.11 u/mol

To know more about mass here

https://brainly.com/question/11954533

#SPJ4

16 gm/mol is the Molar mass of O.

O is the symbol for the element oxygen, which is a diatomic gas with a molar mass of approximately 32 g/mol. This means that one mole of oxygen atoms, which is equivalent to 6.022 x 10^23 atoms, has a mass of 32 grams.

The molar mass of oxygen is calculated by adding the atomic mass of one oxygen atom, which is 16 g/mol, to itself because there are two oxygen atoms in each molecule of oxygen gas. Therefore, the molar mass of O is equal to 2 x 16 g/mol, or 32 g/mol. This is useful information for chemists and scientists who need to perform calculations and measurements involving the amount of oxygen present in a sample of a substance.

To know more about the molar mass, here

brainly.com/question/27907091

#SPJ4

Answer:

In chemistry, a mixture is a substance made up of 2 or more substances that are not chemically combined, but physically combined. This means there are no chemical bonds between the different substances in a homogeneous or heterogeneous mixture. You can think of a salad as an example of a mixture— lettuce, tomatoes, cucumbers, and Parmesan cheese are substances, and each substance retains its own chemical composition and identity.

A homogeneous mixture (from the root “homo” meaning same) has a uniform composition throughout. Furthermore, in a homogeneous mixture, all substances exist in one state of matter. Liquids can be homogeneously mixed with liquids, solids with solids, and so on.

Examples :

1)Saltwater

If salt dissolves in water, it disperses evenly throughout the water. Note that seawater can be heterogeneous if pieces of particulate matter are present, as in nature.

2)Coffee, milk

These drinks consist of many chemicals dissolved in water, spread evenly like in saltwater. However, when milk curdles, it becomes a heterogeneous mixture.

3)Cement, glue

These are homogeneous mixtures of chemicals that set (harden) on drying or exposure to other special conditions. They may have other things added which could make them heterogeneous.

4)Bronze, steel

These are alloys, made by mixing copper and tin (for bronze) or iron and carbon (for steel). Because the resulting mixtures do not have distinguishable regions of each component, they are homogeneous.

5)Air

Air is a mixture of gases spread evenly throughout the atmosphere. Because gas molecules are distant from one another, they always mix evenly and do not form heterogeneous mixtures.

Other examples include :

6)Mouthwash

7)Detergent

8)Cologne

9)Jello gelatin

10) Sugar syrup

When the negative end of one water molecule is drawn toward the positive end of another water molecule, a hydrogen bond is created between the two water molecules.

Amazingly, water can cling to both other substances and to itself. The cohesion characteristic of water is the ability of water molecules to attract other water molecules, making water a "sticky" liquid.

The disparity in charge between hydrogen ions that are slightly positive and other hydrogen ions that are slightly negative results in hydrogen bonds, which are electrostatic forces that attract. Hydrogen bonds develop between nearby hydrogen and oxygen atoms of adjacent water molecules in the case of water. A connection called a hydrogen bond is produced by the attraction between individual water molecules.

To know more about hydrogen:

https://brainly.com/question/29765115

#SPJ4

Potassium atom is weakly electronegative and would be more stable if it gave up a valence electron.

The propensity of an element to draw a pair of bonding electrons is measured by its electronegativity. The Pauling measure is most frequently employed. The number ranges from 4.0 for fluorine, the most electronegative element, to 0.7 for cesium and francium, the least electronegative elements.

What happens if two elements with equivalent electronegativity combine?

Think about the connection between elements A and B. Since both atoms have the same propensity to attract the bonding pair of electrons if they are equally electronegative, it will typically be located halfway between the two atoms.

Normally, A and B would have to be the same atom to form a connection like this. This kind of bond can be found in compounds like H2 or Cl2, for instance. It's essential to keep in mind that this is a typical image. Actually, the electrons are in a molecule orbital, where they are constantly revolving. The electrons in this type of connection are distributed equally between the two atoms, making it a "pure" covalent bond.

To know more about electronegative:

https://brainly.com/question/17762711

#SPJ4

NO is called nitric oxide.

NO is a chemical compound composed of one nitrogen atom and one oxygen atom. It is a colorless gas that is a free radical, meaning it has an unpaired electron. Nitric oxide is an important signaling molecule in many physiological and pathological processes in the human body.

It plays a crucial role in the regulation of blood pressure, immune system function, and neurotransmission. Nitric oxide is also involved in the formation of smog and acid rain in the atmosphere, as well as in the production of fertilizers and explosives in industry.

To know more about the compound, here

brainly.com/question/9674829

#SPJ4

The molar mass of CH30H is 32u. METHANOL is another name for CH3OH. To calculate the molar mass:

Carbon is an element with an atomic mass of 12u and an atomic number of 6. Atomic masses of Hydrogen is 1u, Oxygen has is 16u and an atomic number of 8.

CH3OH/Methanol,

12+3×1+16+1

15 + 17

= 32u.

A methyl group joined to a polar hydroxyl group makes up methanol. It is produced in excess of 20 million tons annually and acts as a precursor to formaldehyde, acetic acid, methyl tert-butyl ether, methyl benzoate, anisole, and other regular chemicals in addition to many more specialized ones.

To learn more about methanol: https://brainly.com/question/10886248

#SPJ4