Answer:
Non-polar
Explanation:
The way to determine if something is polar is by subtracting their electronegativity values. The two atoms in this molecule are both phosphorous which have equal electronegativity values (since they are both phosphorus). Anything minus itself will equal 0. If the final difference between the electronegativity values is less than 0.4, it will be non-polar. Since the result is 0, P2 is non-polar.
In P₂ molecule there is absence of partial charges, thus the molecule has been nonpolar.
The molecules have been differentiated based on polarity as polar and nonpolar molecules. The molecules that have been comprised of the difference in the electronegativity of the elements and develop partial charges have been termed polar compounds.
The compounds with no difference in electronegativity and absence of partial charges are termed nonpolar molecules. In the P₂ molecule, there have 2 phosphorus molecules with the same electronegativities.
Since there has been an absence of polarity in the molecule, the molecule of P₂ is nonpolar.
For more information about polar molecules, refer to the link:
https://brainly.com/question/24775418
Rank the electronegativity values of lithium, oxygen, potassium, and selenium from lowest to highest
Answer:
Potassium < lithium < Selenium < Oxygen
Explanation:
Oxygen has the highest electronegativity value from the given choices.
Electronegativity of an element is a property that combines the ability of its atom to lose and gain electrons.
It is a measure of the relative tendency with which atoms of the element attracts valence electrons in a chemical bond.
Down a group, electronegativity reduces and across the period from left to right, it increasesPotassium and lithium are in group 1 , selenium and oxygen are group 7;
So group 1 elements will have lower electronegativity value.
Potassium is below lithium in group 1 and its electronegativity value will be lower.
Selenium is below oxygen and also, its electronegativity value is lesser.
The electronegativity values of lithium, oxygen, potassium, and selenium from lowest to highest is potassium, lithium, selenium and oxygen.
The electronegativity of an element is a measure of the tendency of an atom of element to attract bonding pair of electrons. Electronegative elements have the ability to attract shared electrons of covalent bonds to itself.
The most electronegative element is fluorine. Electronegativity increases across the period in the periodic table .
Electronegativity decreases down the group in the periodic table. Generally metallic elements are have lower electronegativity. This is because they mostly give out there electrons.
Therefore, the electronegativity values of lithium, oxygen, potassium, and selenium from lowest to highest is potassium, lithium, selenium and oxygen.
read more: https://brainly.com/question/19913727?referrer=searchResults
The formation of an ionic compound involves the transfer of electrons. The removal of one or more electrons from a metal is a process that _____ energy, whereas the addition of one or more electrons to a nonmetal _____ energy.
Answer:
Absorbs, Releases
Explanation:
The formation of an ionic compound involves the transfer of electrons. The removal of one or more electrons from a metal is a process that absorbs energy, whereas the addition of one or more electrons to a nonmetal releases energy.
Answer:
Absorbs
Release
Explanation:
The formation of ionic compounds occurs between two kinds of atoms having a large electronegativity difference (Δx ≥ 0.7) e.g metals (like those in group IA and IIA) and non-metals(like those in groups VIA and VIIA). The formation of an ionic bond involves the transfer of electron(s) from the less electronegative atom (metal) to the more electronegative atom (non-metal) such that the two kinds of atoms now have a completely filled outer shell like the noble gas.
In the equation
FeCl3+ O2 -->Fe2O3 +Cl2
if 6 moles of FeCl3 react with 3 moles of oxygen, what is the excess reactant?
Answer:
FeCl₃ is present in excess.
Explanation:
Given data:
Number of moles of FeCl₃ = 6 mol
Number of moles of oxygen = 3 mol
Excess reactant = ?
Solution:
Chemical equation:
4FeCl₃ + 3O₂ → 2Fe₂O₃ + 6Cl₂
Now we will compare the moles of reactant with product.
FeCl₃ : Fe₂O₃
4 : 2
6 : 2/4×6= 3
FeCl₃ : Cl₂
4 : 6
6 : 6/4×6= 9
O₂ : Fe₂O₃
3 : 2
O₂ : Cl₂
3 : 6
Less number of moles of product are formed by the oxygen thus it will act as limiting reactant while FeCl₃ is present in excess.
MARKING BRAINLIEST!
plant or animal and to explain the reasoning for their conclusion. What is the correct response?
The cell is an animal cell because it has a cell membrane and no cell wall. Cell walls are unique to plant cells.
The cell is a plant cell because it has cytoplasm, which helps the plant make their own food from sunlight.
The cell is a plant cell because it has chloroplast, which helps the plant make its own food from sunlight.
The cell is an animal cell because it has chloroplast used for making useable energy.
Answer:c is correct
Explanation:
Please help me answer this first question.
Answer:
I think it would be 9 moles.
Answer in two or three sentences
Why do you believe knowing how elements and compounds react together is essential in everyday matters?
Answer:
Knowing how elements and compounds react together is essential in everyday life is essential to people like a scientist and someday you might become a scientist no matter what you become you will have to learn all that you can.
UwU Hope I helped
Answer:
it is very important to know how elements and compounds react together because everything that surrounds us is made out of elements and compounds. Therefore, understanding how these work can allow us to have a better understanding of the world that surrounds us. Moreover, it can avoid accidents when we deal with dangerous compounds, such as when we cook or clean
Explanation:
Select the item with the highest embodied energy for a typical American. A. Organically grown oranges transported 500 miles by truck B. Pineapple imported by air from Costa Rica C. Sweet corn produced locally using synthetic fertilizer D. Green beans grown in the backyard garden
Answer:
B: Pineapple imported by air from Costa Rica
Explanation:
Embodied energy is the total energy that is required for the extraction, processing, manufacture and transportation of materials to its intended usage destination.
This means highest embodied energy will be the work that demands the most energy for extraction, processing, manufacture and transportation of materials to its intended usage destination.
Looking at the options given, the one with the highest embodied energy will be "Pineapple imported by air from Costa Rica". This is because other options are done locally and thus will consume lesser energy and processing time unlike the pineapple that is coming from another country and by air.
HELP pleaseee its due soon
Om sister
6 C
7 A
8 C
9 D
10 B
What is the molecular formula of a substance whose molar mass is 166.8 grams and its empirical formula is C2H4N2?
Answer:
C4H2O6
Explanation:
HELP
1) A 400g sample of alcohol (c = 2.43 J/g°C) at 16°C is mixed with 400g
of water (c = 4.19 J/g°C) at 85°C. What is the final temperature of the
mixture?
Answer:
Explanation:
Given data:
Mass of alcohol = 400 g
Specific heat capacity of alcohol = 2.43 J/g°C
Initial temperature of alcohol = 16°C
Mass of water = 400 g
Specific heat capacity of water = 4.19 J/g°C
Initial temperature of water = 85°C
Final temperature of mixture = ?
Solution:
Equation:
m₁c₁ (T₂-T₁ ) = m₂c₂(T₂-T₁)
by putting values,
400 × 4.19 × (T₂ - 85°C) = 400 × 2.43 × (T₂ - 16°C)
1676 × (T₂ - 85°C) = 972 × (T₂ - 16°C)
What's the balanced equation for Iron and copper (II) sulfate solution.
Answer:
2Fe + 3CuSO₄ → Fe₂(SO₄)₃ + 3Cu
Explanation:
The reactants are:
Iron = Fe
Copper (II) sulfate solution = CuSO₄
The reaction is given as:
Fe + CuSO₄ → Fe₂(SO₄)₃ + Cu
This is a single displacement reaction;
Now let us balance the equation;
aFe + bCuSO₄ → cFe₂(SO₄)₃ + dCu
Conserving Fe;
a = 2c
Conserving Cu;
b = d
Conserving S;
b = 3c
Conserving O;
4b = 12c
let b = 1;
c = [tex]\frac{1}{3}[/tex]
d = 1
a = [tex]\frac{2}{3}[/tex]
Multiply through by 3 to get whole numbers;
a = 2, b = 3, c = 1 and d = 3
2Fe + 3CuSO₄ → Fe₂(SO₄)₃ + 3Cu
Cherylanne mixes together Chemical A and Chemical B in a test tube, forming Chemical C. The mixture instantly turns cool to the touch. She then adds Chemical D, and the reaction becomes hot and explodes. What can be known about this situation? Chemicals A and B form an endothermic reaction, and chemicals C and D form an exothermic reaction. Chemicals A and B form an exothermic reaction, and chemicals C and D form an endothermic reaction. Chemicals A and C form an endothermic reaction, and chemicals B and D form an exothermic reaction. Chemicals A and B form an exothermic reaction, and chemicals B and D form an endothermic reaction.
Answer:
Chemicals A and B form an endothermic reaction, and chemicals C and D form an exothermic reaction.
Explanation:
The reaction that produced chemical C is an endothermic reaction whereas, the reaction between C and D is an exothermic one.
An exothermic change is one in which heat is liberated to the surroundings. So the surrounding becomes hotter at the end of the reaction.
An endothermic reaction is a change in which heat is absorbed from the surrounding and hence the surrounding colder at the end of the change.
We can see that the first reaction is endothermic. The second reaction is exothermic.Answer:
A or 1Explanation:
Chemicals A and B form an endothermic reaction, and chemicals C and D form an exothermic reaction.the rest are wrongChemicals A and B form an exothermic reaction, and chemicals C and D form an endothermic reaction.
Chemicals A and C form an endothermic reaction, and chemicals B and D form an exothermic reaction.
Chemicals A and B form an exothermic reaction, and chemicals B and D form an endothermic reaction.
Type the correct answer in each box.
Balance the equation.
SiO2 +
CaC2 →
Si +
CaO +
CO2
Answer:
5SiO2 + 2CaC2 = 5Si + 2CaO + 4CO2
Explanation:
balancing equations is a lot of trial and error. My strategy to approaching this equation was to get the O's balanced. After trying several combonations I found that I needed 10 O's on each side of the equation for the other elements to match up. After I balanced the O's, I balanced my C's to 4 on each side. Then I balanced my Ca's to have 2 on each side. And last but not least I balanced my Si to have 5 on each side.
explain faraday's law
Explanation:
Faraday's Law of Induction describes how an electric current produces a magnetic field and, conversely, how a changing magnetic field generates an electric current in a conductor. ... Magnetic induction makes possible the electric motors, generators and transformers that form the foundation of modern technology.
If the half-life of substance A is 1.5 years, how long would it take an 8.0 gram sample of stances A to decay such that only 1.0 gram remained?
Answer: 4.5 Years
Explanation:
8 -> 4 -> 2 -> 1
Substance goes through 3 Half-Lives
3 Half-Lives x 1.5 Years = 4.5 Years
Answer:
4.5 i think
Explanation:
if hydrochloride tablets and eno combine what will the reaction
answer is attached in the image below
Answer:
Hydrochloric Acid
Explanation:
What variable represents specific heat in the equation Q = mcAT?
O A. The variable c
OB. The variable T
O C. The variable m
O D. The variable Q
Answer: A. The variable c
============================================
Explanation:
Q = heat transferred
m = mass
c = specific heat
[tex]\Delta T[/tex] = delta T = change in temperature
Can someone help me on this? (The second one has the same options as the first one)
Answer:
EASY ITS BUILT DIFERENT
Explanation:
(20 POINTS!!) please help me write a short reference page on chemical bonds (anything helps)
•differentiate the characteristics of ionic and covalent bonds
•summarize the steps and rules for naming IONIC and COVALENT bonds
•describe the role an elements charge has in writing and naming bonds
- how do roman numerals change the process of naming ionic compounds
have a good day :)
Explanation:An ionic bond essentially donates an electron to the other atom participating in the bond, while electrons in a covalent bond are shared equally between the atoms. The only pure covalent bonds occur between identical atoms. ... Ionic bonds form between a metal and a nonmetal. Covalent bonds form between two nonmetals.
What would you see if you were standing on the Earth's surface in the penumbra and you were looking up at the sky?
Answer:
clouds?
Explanation:
im sorry i just wanted the 23 points
Calculate normality and tire of KOH solution , if CN H2 C2 O4 solution , that is nessesary for titration is 0.1050 mol/1 and the Volume is 5.0 ml ; the volume of KOH - solution is 4.5 ml
Answer:
Normality of KOH = 0.1062 N
Note: The given question is not clearly stated. A related question below is answered and explained;
What is the NORMALITY of a solution of KOH if 45.18 mL are required to neutralize 0.3g of pure oxalic acid H2C2O4 . 2H2O?
Explanation:
Equation of the reaction: 2KOH + H₂C₂O₄.2H₂O --> K₂C₂O₄ + 4H₂O
molar mass 0f KOH = 56 g/mol; molar mass of H₂C₂O₄.2H₂O = 126 g/mol
Number of moles of in 0.3 g of H₂C₂O₄.2H₂O = mass/molar mass
number of moles = 0.3 g / 126 g/mol = 0.0024 moles
From the equation of reaction, 2 moles of KOH are required to neutralize 1 mole of H₂C₂O₄.2H₂O
Number of moles of KOH required to neutralize 0.0024 moles of H₂C₂O₄.2H₂O = 2 * 0.0024 = 0.0048 moles
Molar concentration of 45.18 mL solution of KOH containing 0.0048 moles of KOH = number of moles/volume (L)
molarity of KOH solution = (0.0048/45.18 mL) * (1000 mL/1 L) = 0.1062 mol/L
Normality = n * molarity
where is the number of moles of OH⁻ ions produces from mole of KOH = 1
Normality of KOH = 1 * 0.1062
Normality of KOH = 0.1062 N
14. Which of the following involves a chemical change?
A.mixing
b. melting
grinding
d. decomposing
Answer:
D. decomposing
General Formulas and Concepts:
Chemistry
Chemical vs Physical ChangesExplanation:
A would be incorrect because mixing 2 things together doesn't necessarily create a chemical change. Take oil and water for example. You can mix the 2 and it would not have a chemical change.
B would be incorrect because you are simplify changing the state of matter of the object. Iron in solid form is still iron in liquid form; there is no chemical change.
C would be incorrect for similar reasons as B. You are simply changing the state of matter.
D would be the remaining and correct answer. Decomposing changes one object into a different one by chemically changing.
oxidation number of lead is PbO2
Answer:
+4
Explanation:
guys please help me i really need help! pls and thank you!
Answer:
Hydrogen
Explanation:
What is the problem with O2?
Answer:
It’s one of the most popular mobile networks across the UK, but it seems that O2 is having issues this morning
explanation:
According to Down Detector, the issues started at around 10:41 BST, and are affecting users across the UK.
Of those who reported issues, 74% said they were having problems with their mobile phone, 13% with the network, and 11% with mobile internet.
Speaking to Mirror Online, an O2 spokesperson said: "The earlier issue we experienced where some customers may have had difficulty using mobile data has now been resolved. Our technical teams are continuing to closely monitor the situation. We apologise for any inconvenience."
what occurs along a convergent plate boundary ?
Answer:
Two plates pull towards each other
Explanation:
Along a convergent plate boundary, two plates moves towards each other as the move in the same direction.
This results in different forms of plate interactions depending on the plate types.
At an ocean - ocean and continental - ocean convergent front, subduction of the oceanic plate occurs. This is because the oceanic plate below is denser than the asthenosphere. At a continental - continental convergent front, the continental crust is pulls upward and build up as a mountain. The subduction produces trenches and some volcanic islands.Answer:
What happens along a convergent plate boundary?
If two tectonic plates collide, they form a convergent plate boundary. Usually, one of the converging plates will move beneath the other, a process known as subduction. ... The new magma (molten rock) rises and may erupt violently to form volcanoes, often building arcs of islands along the convergent boundary
Explanation:
The function of a specific enzyme is mostly determined by its
Answer:
What does the shape of an enzyme determine? The shape of the enzyme determines which chemical reaction it will speed up. -The region on an enzyme that the substrate fits into. ... The active site of an enzyme only fits one type of substrate molecule.
Explanation:
Which type of reaction occurs in the core of a nuclear reactor in a nuclear power plant? Upper H upper C l plus upper N a upper O upper H right arrow upper H subscript 2 upper O plus upper n a upper C l. Superscript 235 subscript 92 upper U plus superscript 1 subscript 0 n right arrow superscript 90 subscript 38 upper S r plus superscript 143 subscript 54 upper X e plus 3 superscript 1 subscript 0 n. Superscript 90 subscript 38 upper S r plus superscript 143 subscript 54 upper X e plus 3 superscript 1 subscript 0 n right arrow superscript 235 subscript 92 upper U plus superscript 1 subscript 0 n. Upper C subscript 10 upper h subscript 8 plus 12 upper O subscript 2 right arrow 10 upper C upper O subscript 2 plus 4 upper H subscript 2 upper O.
Answer:
Superscript 235 subscript 92 upper U plus superscript 1 subscript 0 n right arrow superscript 90 subscript 38 upper S r plus superscript 143 subscript 54 upper X e plus 3 superscript 1 subscript 0 n.
Explanation:
B
Answer:
b
Explanation:
got it right on test
3. Write the equation for the reaction of metal with oxygen and non metal with oxygen and then
predict the nature of the substance formed when the oxide of metal and oxide of non metal is
dissolved in water.
Answer:
Acidic Oxides: Acidic oxide are oxides that react with water to form an acid. Acidic oxides are formed by reaction of non metals with oxygen .
[tex]S+O_2\rightarrow SO_2[/tex]
[tex]SO_2+H_2O\rightarrow H_2SO_4[/tex]
Basic Oxides: Basic oxides are oxides that react with water to form bases. Basic oxides are formed by reaction of metals with oxygen.
[tex]2Mg+O_2\rightarrow 2MgO[/tex]
[tex]MgO+H_2O\rightarrow Mg(OH)_2[/tex]
Which square (A, B, C, or D) represents the repeating subunit of the polymer shown?
Answer:
c is the answer
Explanation: just answerd it and got it correct
