Question: What is the formal charge on the O atom in each of the following species that contains a multiple bond to O? The formal charge on the oxygen atom is +1.The formal charge on the oxygen atom is +1.The formal charge on the oxygen atom is 0.

If water is produced from the reaction of hexane and of oxygen gas, then the percent yield of water is 8.6%.

The balanced equation for the reaction between hexane and oxygen to form carbon dioxide and water is:

C₆H₁₄ + 19/2 O₂ → 6CO₂ + 7H₂O

The stoichiometric ratio between hexane and water is 1:7, which means that for every 1 mole of hexane, 7 moles of water are produced.

If 0.30 moles of water are produced from the reaction of 0.50 moles of hexane and excess oxygen gas, then the theoretical yield of water is:

0.50 moles hexane × (7 moles H₂O / 1 mole hexane) = 3.5 moles H₂O

The percent yield of water is calculated by dividing the actual yield of water by the theoretical yield of water and multiplying by 100%:

percent yield =(actual yield/theoretical yield) × 100%

percent yield = (0.30 moles H₂O / 3.5 moles H₂O) × 100%

percent yield = 8.6%

Therefore, the percent yield of water is 8.6%.

To know more about percent yield here

https://brainly.com/question/2506978

#SPJ4

The four rules for naming ionic compounds are: 1) write the name of the cation, 2) write the name of the anion, 3) combine the names and 4) use roman numerals to indicate the charge of the cation if it is a transition metal.

The cation (positive ion) is named first, followed by the anion (negative ion).

The name of the cation is the same as the element from which it is derived. If the element can form cations with different charges, the charge is indicated using Roman numerals in parentheses after the element name.

The name of the anion is derived from the name of the element, with the ending changed to "-ide".

If the compound contains a polyatomic ion (a group of atoms with a net charge), the name of the ion is used in the compound name.

To know more about the ionic compounds, here

brainly.com/question/29005103

#SPJ4

Answer: there would be 12.5 grams of copper in the solution

Explanation:

50 grams of Copper (Cu) were dissolved in enough water to make 2.0 liters of solution.200 grams of copper would be in 500 ml of this solution.

The term molarity is defined as the concentration of a solution showed as the number of moles of solute per litre of solution.

Given:

M1 = 50 grams

V1 = 2.0 liters = 2000ml

M2 = ?

V2 = 500 ml

By using formula of molarity, we get

M1V1 = M2V2

Substitute the given values in above equation

First rearrange the equation

M2 = M1V1/V2

= 50 × 2000 / 500

= 200 grams

Thus, 200 grams of copper would be in 500 ml of this solution.

To learn more about the molarity, follow the link;

https://brainly.com/question/8732513

#SPJ1

The major organic product for the given two step reaction is lithium diisopropyl amide (LDA).

The chemical molecule known as lithium diisopropyl amide, or LDA for short, has the molecular formula LiN(CH(CH₃)₂)₂. Due to its non-nucleophilic character as well as excellent solubility in non-polar organic solvents, it is a strong base that is frequently used. It is a colorless solid which is often only produced and seen in the solutions.

LDA is strongly polar yet, like the majority of organolithium reagents, is not a salt. In solution, it aggregates, to varying degrees depending on the solvent's properties. Its structure in THF is essentially that of a dimer that has been solvated. While LDA in its solid form is pyrophoric, its solutions are typically not. As a result, it is readily accessible in the market as a solution in polar aprotic solvents like THF and ether; but, for small-scale applications (less than 50 mmol), it is more usual and financially advantageous to manufacture LDA in situ.

To know more about lithium diisopropyl amide ( LDA ) , visit :

https://brainly.com/question/22528534

#SPJ1

The mass of sucrose that is hydrolyzed when 2.60 l of a 0.160 m sucrose solution is allowed to react for 200 minutes is 106 g.

The following information in the complete question;

Rate constant (k) = 1.8 x 10^-4 s^-2

Initial concentration (Ao) = 0.130 M

Time is taken =  190 minutes or 11400 seconds

Final concentration (A) =?

Given that;

lnA = lnAo - kt

A = e^ lnAo - kt

A = e^[(ln0.130) - ( 1.8 x 10^-4  x  11400)

A = 0.017 M

Now;

n = CV

n = Number of moles

C = Molar concentration

V = volume

After hydrolysing the number of moles = 0.017 M ×  2.75 L

= 0.047 moles

Before hydrolysing number of moles =0.130 M  ×  2.75 L = 0.358 moles

Hydrolysed number of moles include=  0.358 moles - 0.047 moles = 0.311 moles

Mass = Number of moles × molar mass

Molar mass of sucrose = 342 g/mol

Mass =   0.311 moles × 342 g/mol

Mass = 106 g

To learn more about mass,

brainly.com/question/24191825

#SPJ4

The reactants, products and energy sources of the photosynthetic reaction are as follows:

Photosynthesis is any process by which plants and other photoautotrophs convert light energy into chemical energy.

Photosynthesis combines carbondioxide and water to produce glucose and oxygen with the dispense of energy.

Carbondioxide and water can be classified as reactants while glucose and oxygen can be regarded as products.

Learn more about photosynthesis at: https://brainly.com/question/29764662

#SPJ1

A magnesium ion has 12 electrons, with the electron configuration of 1s²2s²2p⁶3s². When magnesium loses two electrons to form an ion, the last-filled electron in the ion will be in a 3p orbital.

Out of the given options, only ψ 3,0,1 corresponds to a 3p orbital, with n=3, l=1, and m=0. Therefore, ψ 3,0,1 is a possible ψ for the last-filled electron in a magnesium ion.

An electron configuration refers to the distribution of electrons in the atomic orbitals of an atom or ion. It describes the arrangement of electrons in the electron shells and subshells and is usually represented using a notation that indicates the number of electrons in each shell and subshell. The electron configuration of an atom is determined by the number of protons in its nucleus and the rules governing the filling of electron shells and subshells. The electron configuration of an atom plays a critical role in determining its chemical and physical properties, including its reactivity, bonding, and the energy required to remove or add electrons.

To know more about reactivity, visit:

https://brainly.com/question/1598581

#SPJ1

Therefore, the new volume of the nitrous oxide is 1.64 L when the pressure changes from 1.25 atm to 1.91 atm and the temperature remains constant.

Volume is the amount of space that a substance or an object occupies. It is a physical property of matter that can be measured in cubic units. The volume of a substance can be determined by measuring its dimensions, such as length, width, and height, and then multiplying these values together. In the case of a gas, the volume is the amount of space that the gas occupies in a container. The volume of a gas can be affected by changes in pressure and temperature, as described by the ideal gas law. In this case, the volume is often expressed in terms of standard temperature and pressure (STP), which are defined as a temperature of 0°C and a pressure of 1 atmosphere (atm).

Here,

To solve this problem, we can use Boyle's Law, which states that the pressure and volume of a gas are inversely proportional when the temperature is constant. Mathematically, this can be expressed as:

P₁V₁ = P₂V₂

where P₁ and V₁ are the initial pressure and volume, respectively, and P₂ and V₂ are the final pressure and volume, respectively.

We are given that the pressure changes from 1.25 atm to 1.91 atm, and the initial volume is 2.50 L. To find the final volume, we can use Boyle's Law and solve for V₂:

P₁V₁ = P₂V₂

(1.25 atm)(2.50 L) = (1.91 atm)(V2)

V₂= (1.25 atm)(2.50 L) / (1.91 atm)

V₂= 1.64 L

To know more about volume,

https://brainly.com/question/25252629

#SPJ1

Boyle's Law states that at a constant temperature, the pressure of a gas is inversely proportional to its volume, which can explain why shower curtains are affected when using a shower due to the decrease in air pressure in the shower space.

The shower phenomenon refers to the movement of a shower curtain towards the shower when the water is turned on. This is caused by the decrease in air pressure in the shower space due to the flow of water from the showerhead. This decrease in pressure causes the higher atmospheric pressure outside of the shower to push the curtain inward.

Boyle's Law can be used to explain the shower phenomenon by showing that the decrease in air pressure inside the shower space causes the curtain to move inward, as the pressure outside the shower remains constant. This law can also be used to explain other phenomena such as the behavior of gases in a scuba tank, the operation of a bicycle pump, and the changes in volume and pressure of the lungs during respiration.

Learn more about Boyle's Law here:

https://brainly.com/question/30367133

#SPJ1

The structural formula for 2-methyl-2-butane is as follows(See Picture): The methyl groups are joined to the second carbon atom from either end of the main chain, which is numbered from left to right.

2-methyl-2-Butane, often known as butane or n-Butane, has the following chemical formula: [tex]C_4H_{10}[/tex]. It is a regularly used fuel that is a highly combustible gas that has no colour or smell. 2-Butane is a straight-chain alkane with a carbon atom count of four and a hydrogen atom count of ten. Its boiling point is -0.5°C, whereas its melting point is -138°C. Many organic solvents can dissolve it even if it is insoluble in water. 2-Butane is frequently used in household and commercial refrigeration systems, stoves, and lighters. It serves as a feedstock for the synthesis of several substances, including butadiene and methyl ethyl ketone.

Learn more about butane here:

brainly.com/question/13630264

#SPJ4

There are 1.053 × 10^23 hydrogen atoms in 5.29 × 10^21 molecules of ethanol.

The molecular formula for ethanol (C2H5OH) tells us that it contains 2 atoms of hydrogen per molecule.

First we can use the Avogadro's number, which gives us the number of molecules in a mole of a substance, and the molecular formula of ethanol:

1 mole of ethanol contains 2 moles of hydrogen atoms

1 mole of ethanol contains 6.022 × 10^23 molecules (Avogadro's number)

Therefore, we can calculate the number of hydrogen atoms in a given number of ethanol molecules as follows:

Therefore, there are 1.053 × 10^23 hydrogen atoms in 5.29 × 10^21 molecules of ethanol.

Learn more about avogadro's number here : brainly.com/question/1433200

#SPJ1

We would need  1.5 moles of oxygen

The mole is a unit of measurement used in chemistry to express the amount of a substance. One mole is defined as the amount of a substance that contains the same number of particles (such as atoms, molecules, or ions) as there are atoms in exactly 12 grams of carbon-12. This number of particles is known as Avogadro's number, which is approximately 6.022 x 10^23 particles per mole.

We have the correct reaction equation as;

2H₂ + O₂ →2 H₂O

If 1 mole of oxygen makes 2 moles of water

x moles of oxygen makes 3 moles of water

x = 1.5 moles

Learn more about moles:https://brainly.com/question/26416088

#SPJ1

Kb for CN⁻ is 2 x 10⁻⁵, Ka for NH⁴⁺ is 5.6 x 10⁻¹⁰.

The Kb value for CN⁻  and Ka value for NH⁴⁺ can be calculated using the following equation:

Kw = Ka × Kb

where Kw is the ion product constant for water, Ka is the acid dissociation constant, and Kb is the base dissociation constant.


At 25.0°C, the value of Kw is 1.0 × 10⁻¹⁴.


For HCN:

Ka = 4.9 × 10⁻¹⁰


For NH3:

Kb = 1.8 × 10⁻⁵


To find the Kb value for CN⁻ :

Kb = Kw / Ka

Kb = (1.0 × 10⁻¹⁴) / (4.9 × 10⁻¹⁰)

Kb = 2.0 × 10⁻⁵


To find the Ka value forNH⁴⁺:

Ka = Kw / Kb

Ka = (1.0 × 10¹⁴) / (1.8 × 1010⁻⁵)

Ka = 5.6 × 10⁻¹⁰


Therefore, the Kb value for CN− is 2.0 × 10⁻⁵ and the Ka value for NH4+ is 5.6 × 10⁻¹⁰.

Learn more about Ka value at https://brainly.com/question/2796803

#SPJ11

The given expression is a chemical equation that represents a reaction between nitric acid (HNO3) and magnesium hydroxide (Mg(OH)2). The balanced chemical equation for the reaction is:

2HNO3 + Mg(OH)2 → 2H2O + Mg(NO3)2

In this reaction, two molecules of nitric acid react with one molecule of magnesium hydroxide to produce two molecules of water and one molecule of magnesium nitrate. The coefficients in the balanced chemical equation indicate that two moles of HNO3 react with one mole of Mg(OH)2 to produce two moles of H2O and one mole of Mg(NO3)2.

While reaction two is endothermic, reaction one is exothermic. A reaction that loses energy in the shape heat warmth is exothermic. An endothermic reaction is one that absorbs energy in the form of heat.

Reaction is the process of responding to any type of stimulus. It could be an emotional response, a physical reaction, or an intellectual response. For example, when you see a scary movie, you might have a physical reaction of your heart beating faster or feeling a chill. When someone says something that offends you, you might have an emotional reaction of anger or sadness. When you read a scientific article, you might have an intellectual reaction of understanding or confusion. In each case, the reaction is a response to a stimulus.

To learn more about reaction
https://brainly.com/question/24795637
#SPJ1

Answer: Positive and gave off

Explanation: just did it :)

Alkene /Aromatic region of a 13C NMR spectrum of the following molecule produces 3 signal.

One signal will be produced for each of the two homotopic couples, and one for carbon 3 alone. Despite the fact that pentane has five carbon atoms, this leads to the presence of a total of three 13C NMR signals. These alkane symmetry principles also hold true for alkenes and alkynes.

Due to sp2 hybridization and the double bond to oxygen, the 13C-NMR signals for carbonyl carbons are often the deepest downfield (170–220 ppm).

A spectroscopic method for observing the local magnetic fields surrounding atomic nuclei is nuclear magnetic resonance spectroscopy, also referred to as magnetic resonance spectroscopy or NMR spectroscopy.

To know about spectrum

https://brainly.com/question/3997802

#SPJ4

The  prokaryotic cell and eukaryotic cell both contain the ribosomes. The Ribosomes are the non - membrane bound organelles.

The Eukaryotic cells contain the membrane - bound the organelles, such as the nucleus, the endoplasmic reticulum, the mitochondria while the prokaryotic cells do not contain the nucleus, endoplasmic and the mitochondria but the ribosome is the organelle that can be seen in the  both the prokaryotic cell and the eukaryotic cell.

The Prokaryotic and the eukaryotic ribosomes that is perform by the same functions that is the protein synthesis, however, the eukaryotic ribosomes are the much larger than the prokaryotic cell.

To learn more about prokaryotic here

https://brainly.com/question/13273192

#SPJ4

Answer:

D carbon dioxide

Explanation:

videos

When the pressure in the lung is greater than atmospheric pressure, expiration occurs.

Generally, expiration is defined as the process of expelling out carbon dioxide-rich air. Basically, during expiration, the ribs moved downwards and also inwards and the diaphragm relaxes and moves upwards. This inward and outward movement of diaphragm leads to a decrease in the volume of the lungs.

Expiration is basically a passive process because no muscular contraction occurs in order to cause air to flow out of the lungs. Relaxation of the diaphragm, and the intercostal muscles will definitely increase the pressure of the thoracic cavity (and inside of the lungs) over the atmospheric pressure, causing air to leave the lungs.

Learn more about atmospheric pressure from the link given below.

https://brainly.com/question/28310375

#SPJ4

When a nonsense mutation occurs in the 267th codon of a gene that encodes a 500 amino acid protein. The number of amino acids does the mutated polypeptide contain is 266. Hence, the correct choice is A.

Generally mutation is defined as an alteration in the genes or chromosomes of a cell. This genes shift or the mutation in the gametes may impact the development and structure of the progeny. A mutation in biology is defined as a modification of the nucleic acid sequence of a virus, extrachromosomal DNA, or the genome of an organism.

Hence, the correct option is A.

Learn more about mutation from the link given below.

https://brainly.com/question/17130462

#SPJ4

The VSEPR theory predicting the 3d shapes of molecules - it is true as the model predicts the 3-D shape of molecules and ions but is ineffective in providing any specific information regarding the bond length or the bond itself.

As we know that the VSEPR also know as know the Valence Shell Electron Pair Repulsion Model predicts the 3-D shape of molecules and ions but is ineffective in providing any specific information regarding the bond length or the bond itself. This model is basically used to predict the geometry of molecules. The VSEPR models more specifically look at the bonding and molecular geometry of organic molecules and also polyatomic ions. It is useful for nearly all compounds that have a central atom that is not a metal.

To learn more about the VSEPR model, click here:

brainly.com/question/29022281

#SPJ4

Lewis dot structures, electron "."structures, are diagrams that depict both the interactions of atoms within a molecule and any lone pairs of electrons that may be present. There will be four dots surrounding the letter C, which stands for carbon.

The electrons in their valence shells can be shared or transferred when atoms come together to form compounds. Lewis . structures were used as tents.

Each of the four valence electrons is represented as a . in the Lewis symbol for carbon.

This displays the carbon letter C with four dots surrounding it. The four dots stand for the four electrons that make up carbon's valence shell. The 2s and 2p orbitals are home to these electrons.

The electrons added to or subtracted from the Lewis dot diagram when the atom is an ion are equal to the charge's magnitude. An anion (negative charge) has electrons added to it, whereas a cation (positive charge) has electrons subtracted.

To learn more about Lewis dot structure: https://brainly.com/question/20300458

#SPJ4

You may use the following formula to convert ppm (parts per million) to mg/L (milligrammes per litre): 1 mg/L equals 1 ppm.

As there is a 1:1 ratio between parts per million and milligrammes per litre, one part per million is equivalent to one milligramme per litre. As both ppm and mg/L are measures of concentration, this connection may be explained by the fact that ppm measures the parts of a drug per million parts of the solution and mg/L measures the number of milligrammes of a material per litre of the solution. Just multiply the ppm number by 1, which is the conversion factor between the two units, to convert ppm to mg/L. Any number in ppm may be quickly and simply converted to mg/L using this straightforward procedure.

Learn more about ppm here:

https://brainly.com/question/16727593

#SPJ4

Researchers have found that fetal heart rate Decreases when it hears a familiar story, suggesting that fetuses are soothed by familiar things.

The circulatory system of the fetus is distinct from that of a newborn infant because it does not use its own lungs until delivery. The fetal heart does not need to pump blood to the lungs to take up oxygen before delivery. In other words, the pulmonary artery and aorta do not need to be distinct for the fetal heart. These two blood arteries are linked in the fetal heart by a blood vessel known as the ductus arteriosus. The ductus closes after birth, and a distinct left pulmonary artery and aorta develop.

The foramen ovale, which is an opening between the top chambers of the fetal heart (the right and left atria), is also present. During fetal development, it allows blood to flow straight from the right atrium to the left atrium, but it closes after delivery. Thus, the foramen ovale and the ductus arteriosus are a component of the fetal heart.

To know more about fetal heart:

https://brainly.com/question/29894189

#SPJ4

Respiratory alkalosis is the primary problem that the given ABG information describe.

When the blood's acid-base balance is upset by high levels of carbon dioxide, respiratory alkalosis results. People who have rapid, uncontrollable breathing frequently experience it (hyperventilation). Therapies to lower the risk of hyperventilation are part of the treatment.

Your body works nonstop to maintain the proper acid-base (alkali) balance in your blood. When there is too much alkali and not enough acid, alkalosis develops. The acid-base balance may change chemically in response to changes in breathing or metabolism.

The most common cause of respiratory alkalosis is overbreathing, also known as hyperventilation, which happens when you breathe in deeply or quickly.

Learn more about respiratory alkalosis

https://brainly.com/question/10889363

#SPJ1

Complete question:

What primary problem does the following ABG information describe?

pH: 7.5

PaCO2: 19 mmHg

HCO3: 16 mEq/L

A. metabolic acidosis

B. metabolic alkalosis

C. respiratory acidosis

D. respiratory alkalosis

The basic principle of the Cyclical Model Theory is the universe begins with the big bang and ends with a big corn sure of the universe's expansion is reversed.

The correct option is D.

The Cyclical Model Theory proposes that the universe undergoes an infinite series of cycles, with each cycle, beginning with a "big bang" and ending with a "big crunch". After the big crunch, the universe undergoes a period of contraction until it becomes a singularity, which then expands again in another big bang, starting the cycle anew.

This theory assumes that the universe is eternal and that the cycle of birth, growth, decay, and rebirth repeats indefinitely.

Learn more about the cyclical model theory at: https://brainly.com/question/28740891

#SPJ1

The compound pairs are the constitutional isomers are :

C. CH₃COCH₂CH₃ and CH₃CH₂COCH₃

D. CH₃CH₂CH₂CHO and CH₃COCH₂CH₃

G. CH₃COCH₂CH₃ and CH₃CH₂COCH₃

H. CH₃CH₂CH₂CHO and CH₃COCH₂CH₃

When the compounds have same molecular formula represents by the different compounds which are differ from the one another by the means of their structures are called the constitutional isomers.

The Constitutional isomers are those which have the same molecular formulas, but they will have the different connectivity.

C. CH₃COCH₂CH₃ and CH₃CH₂COCH₃ , the number of the carbon , oxygen and hydrogen atoms are same but the structure are different.

D. CH₃CH₂CH₂CHO and CH₃COCH₂CH₃, the number of the carbon , oxygen and hydrogen atoms are same but the structure are different.

G. CH₃COCH₂CH₃ and CH₃CH₂COCH₃, the number of the carbon , oxygen and hydrogen atoms are same but the structure are different.

H. CH₃CH₂CH₂CHO and CH₃COCH₂CH₃, the number of the carbon , oxygen and hydrogen atoms are same but the structure are different.

To learn more about constitutional isomers here

https://brainly.com/question/9355669

#SPJ4

Battery would be the best analogy for an electrochemical gradient across a cellular membrane. Hence, the correct choice is C.

Generally, the electrochemical gradient is defined as a measure of the free energy that is available to carry out the useful work of transporting the molecule across the membrane. Electrochemical gradient mainly has two types of components out of which one component represents the energy in the concentration gradient for X across the membrane(chemical potential difference).

Generally, battery is defined as a device that stores chemical energy and converts it to electrical energy. Basically, the chemical reactions in a battery involve the flow of electrons from one material (electrode) to another, through an external circuit.

Hence, option C is correct.

Learn more about electrochemical gradient from the link given below.

https://brainly.com/question/17136000

#SPJ4

Precipitate is produced when Nibr2 and AgNo3 are combined in aqueous solutions. The correct option to this question is A.

For more information on precipitation kindly visit to

https://brainly.com/question/29762381

#SPJ1

Acetic acid will corrode metals since it is acidic, forming acetate salts in the process. For instance, acetic acid and magnesium (Mg) will combine to generate magnesium acetate

What is the role of magnesium in the body?

Magnesium is required by the body to keep its muscles, especially the heart, healthy. According to research, magnesium is crucial for heart health. A 2018 research found that a person's risk of cardiovascular issues can rise if they have a magnesium shortage. This is partially brought on by its cellular functions.

What are supplements for magnesium?

A mineral called magnesium that is necessary for the body's regular bone structure. Although most people acquire their magnesium through food, if levels are extremely low, magnesium supplements may be necessary.

To know more about magnesium visit:

https://brainly.com/question/1533548

#SPJ1