In the following acid-base reaction,
HPO42- is the
H2PO4- (aq) + NH3(aq) → HPO42- (aq) + NH4+(aq)
А
B
С
acid
conjugate
acid
conjugate
base

The predominant form of the amino acid that is abbreviated val at the pH 7 is the neutral.

The Valine that is the symbol Val or the V is the α-amino acid that is used for the biosynthesis of the proteins. The pH scale ranges from the 0 to the 14. The pH value below the 7 is the acidic in the nature and the pH value with the value above than the 7 is the basic in the nature. The pH value 7 is the neutral in the nature.

Thus, the neutral is the  predominant form of the amino acid abbreviated Val at pH 7.

To learn more about pH here

https://brainly.com/question/15289741

#SPJ4

The correct Lewis structure of IF₅ is given below in the image attached.

Generally a Lewis Structure is defined as a very simplified representation of the valence shell electrons in a molecule. Lewis structure is basically used to show how the electrons are arranged around individual atoms present in a molecule.

Generally, in the Lewis structure of  IF₅, there are five fluorines atoms connected with a single bond surrounding the central atom i.e., I. The iodine atom usually carries one lone pair and five fluorine atoms carry three lone pairs. Iodine pentafluoride generally have a square pyramidal geometry and the hybridization of IF₅ is sp₃d₂.

Learn more about Lewis structure from the link given below.

https://brainly.com/question/20300458

#SPJ4

In chemistry, a buffer is a solution that typically contains an acid and a base, or a salt, and which helps to keep the concentration of hydrogen ions constant. Atoms or molecules that have acquired or lost one or more electrons are known as ions.

When acidic or basic substances are added, a substance is said to be a buffer if it can endure the pH change. It can neutralize minor amounts of acid or base, essentially maintaining the solution's pH. This is important for processes and/or reactions that require specific and stable pH values. How much acid or base can be mitigated before pH changes, as well as how much pH will change, depends on the pH range and capacity of buffer solutions.

What components comprise a buffer?

To successfully maintain a pH range, a weak conjugate acid-base pair, which can be either a weak acid and its conjugate base or a weak base and its conjugate acid, must be present. The pH that is wanted when making the buffer will simply determine which should be used. The following, for instance, could serve as barriers when mixed together in a solution:

Sodium acetate is a salt that contains acetic acid, a weak organic acid with the formula [tex]CH_{3} COOH[/tex] and its corresponding base, the acetate anion ([tex]CH_{3} COO-[/tex]) ([tex]CH_{3}COONa[/tex])

Pyridinium chloride is a compound that contains pyridinium cation ([tex]C_{5}H_{5}NH+[/tex]), the conjugate acid of pyridine (weak base with formula [tex]C_{5}H_{5}N[/tex]).

Ammonia (weak base with formula [tex]NH_{3}[/tex]) and a salt having the ammonium cation, which is the conjugate acid of ammonia, are examples of such compounds ([tex]NH_{4}OH[/tex])

To know more about buffers:

https://brainly.com/question/3435382

#SPJ4

The reaction in the cold pack is an endothermic reaction

The question is incomplete but I will explain generally the reaction in a cold pack

The reaction in a cold pack is typically endothermic. Cold packs are designed to absorb heat from their surroundings in order to create a cooling effect. This is achieved through a chemical reaction that takes place inside the pack.

Most cold packs contain two separate compartments, one containing water and the other containing a solid or powdered substance, such as ammonium nitrate. When the pack is activated, the barrier between the two compartments is broken and the water and solid/powdered substance are mixed together. This reaction is typically endothermic, meaning it absorbs heat from its surroundings in order to proceed.

Learn more about endothermic:https://brainly.com/question/23184814

#SPJ1

Third-degree polynomials are also referred to as cubic polynomials. It is in the form of:

[tex]p(x)=ax^3+bx^2+cx+d[/tex], where a ≠ 0.

Using variables and coefficients, polynomials are algebraic expressions. A variable's degree in a polynomial equation is its highest or greatest power. The polynomial's highest power of exponential is indicated by the degree. A polynomial in which the greatest term's degree is three is said to be a third-degree polynomial.

With a degree of three, a third degree polynomial, also called a cubic polynomial, is a particular kind of mathematical statement. is the variable, and a, b, c, and d are constants. It is created by adding or removing monomials (terms) of the form  Cubic polynomials can have a single root or three roots, or x values that bring the polynomial to a value of 0.

Learn more about third degree polynomial

brainly.com/question/17071470

#SPJ4

The given reaction is hydrolysis.

Basically when we talk about hydrolysis, it is a chemical reaction where a larger molecule is broke down into smaller molecules or individual components using water.

Water is [tex]H_{2} O[/tex] and this can split into both H+ and OH- . This water can donates a hydrogen ion H+ to one part of the molecule and a hydroxyl group OH- to another part. Due to this, there happens a cleavage or separation in larger molecules.

In the given reaction molecule of water is used to break a disaccharide into two separate monosaccharides. Disaccharide is a molecule which constituted by two monosaccharides.

Same way above mentioned, the water molecule donates a hydrogen ion H+ to one of the monosaccharides and a hydroxyl group OH- to the other.

As a result the separation happens into two monosaccharides. Term "hydrolysis" literally means "breaking apart with water."

Learn more about hydrolysis:

https://brainly.com/question/11461355

#SPJ4

Answer:A balanced chemical equation provides a great deal of information in a very succinct format. Chemical formulas

provide the identities of the reactants and products involved in the chemical change, allowing classification of the

reaction. Coefficients provide the relative numbers of these chemical species, allowing a quantitative assessment

of the relationships between the amounts of substances consumed and produced by the reaction. These quantitative

relationships are known as the reaction’s stoichiometry, a term derived from the Greek words stoicheion (meaning

“element”) and metron (meaning “measure”). In this module, the use of balanced chemical equations for various

stoichiometric applications is explored.

The general approach to using stoichiometric relationships is similar in concept to the way people go about many

common activities. Food preparation, for example, offers an appropriate comparison. A recipe for making eight

pancakes calls for 1 cup pancake mix, 3

4

cup milk, and one egg. The “equation” representing the preparation of

pancakes per this recipe is

1 cup mix + 3

4

cup milk + 1 egg ⟶ 8 pancakes

If two dozen pancakes are needed for a big family breakfast, the ingredient amounts must be increased proportionally

according to the amounts given in the recipe. For example, the number of eggs required to make 24 pancakes is

24 pancakes ×

1 egg

8 pancakes = 3 eggs

Balanced chemical equations are used in much the same fashion to determine the amount of one reactant required to

react with a given amount of another reactant, or to yield a given amount of product, and so forth. The coefficients in

the balanced equation are used to derive stoichiometric factors that permit computation of the desired quantity. To

illustrate this idea, consider the production of ammonia by reaction of hydrogen and nitrogen:

N2

(g) + 3H2

(g) ⟶ 2NH3

(g)

This equation shows ammonia molecules are produced from hydrogen molecules in a 2:3 ratio, and stoichiometric

factors may be derived using any amount (number) unit:

2 NH3 molecules

3 H2 molecules or

2 doz NH3 molecules

3 doz H2 molecules or

2 mol NH3 molecules

3 mol H2 molecules

These stoichiometric factors can be used to compute the number of ammonia molecules produced from a given

number of hydrogen molecules, or the number of hydrogen molecules required to produce a given number of

ammonia molecules. Similar factors may be derived for any pair of substances in any chemical equation.

Explanation:

Answer:

2.3 kg.

Explanation:

The balanced equation tells us that 2 moles of sodium (Na) reacts with 1 mole of sulfuric acid (H2SO4) to produce 1 mole of hydrogen gas (H2).

To calculate the mass of sodium needed to produce 100g of hydrogen gas, we need to use the following steps:

Calculate the number of moles of hydrogen gas produced from 100g of hydrogen gas.

Use the mole ratio from the balanced equation to determine the number of moles of sodium required to produce that amount of hydrogen gas.

Convert the moles of sodium to grams using the molar mass of sodium.

Step 1:

The molar mass of hydrogen gas (H2) is 2 g/mol. Therefore, 100g of hydrogen gas is equal to 100/2 = 50 moles of H2.

Step 2:

From the balanced equation, 2 moles of Na reacts with 1 mole of H2. So, the number of moles of Na required to produce 50 moles of H2 is:

2 moles Na / 1 mole H2 = 2 * 50 = 100 moles Na

Step 3:

The molar mass of sodium (Na) is 23 g/mol. Therefore, the mass of sodium required to produce 100g of hydrogen gas is:

100 moles Na * 23 g/mol = 2300g or 2.3 kg of Na

Therefore, the mass of sodium needed to produce 100g of hydrogen gas is 2.3 kg.

The main differences between ion channels and ion pumps are that ion channels allow ions to passively move across the membrane and are typically regulated by external stimuli, while ion pumps actively transport ions across the membrane using energy and are not directly regulated by external stimuli.

Ion channels and ion pumps are both involved in the movement of ions across cell membranes, but they operate through different mechanisms and have different functions.

Ion channels are protein structures that allow ions to move across cell membranes by creating a pore or channel through which they can pass. Ion channels are typically highly selective, allowing only certain types of ions to pass through. Ion channels can be gated, meaning that they can be opened or closed in response to various stimuli, including changes in membrane potential, binding of ligands, or mechanical stress. Ion channels are important for the rapid movement of ions across the membrane, which is necessary for processes such as nerve signaling, muscle contraction, and the secretion of hormones and neurotransmitters.

In contrast, ion pumps are membrane proteins that actively transport ions across the membrane using energy in the form of ATP hydrolysis. Ion pumps are highly selective and can transport ions against their concentration gradients. One example of an ion pump is the sodium-potassium pump, which transports three sodium ions out of the cell and two potassium ions into the cell for every ATP molecule hydrolyzed. Ion pumps are important for maintaining ion concentrations inside and outside the cell, and for regulating cell volume.

For such more questions on Ions

https://brainly.com/question/14511468

#SPJ4

Lavoisier's experiments marked the first time someone tested the idea of the conservation of matter by measuring masses of materials both before and after they undergoing a chemical reaction.

In physics and chemistry, law of conservation of mass or principle of mass conservation states that for any system closed to all transfers of matter and energy, the mass of the system must remain constant over time, as the system's mass cannot change, so the quantity can neither be added nor be removed.

Atoms are neither created nor destroyed during chemical reaction and to form products,  atoms of the reactants are rearranged. As a result, there is no change in the mass during chemical reaction.

To know more about conservation of mass, refer

https://brainly.com/question/15289631

#SPJ1

Note: The question given on the portal is incomplete. Here is the complete question.

Question: What is a good lab test for the law of conservation of mass/matter?

The process that releases energy is "condensation." Condensation is the process by which a gas or vapor changes phase into a liquid when it loses energy (heat).

As the gas molecules lose energy, they move closer together, and intermolecular forces cause them to form a liquid.

During condensation, energy is released into the surrounding environment in the form of heat. This energy is the same as the energy that was added to the substance during the process of evaporation, which is the opposite of condensation.

Freezing and sublimation are processes that require energy input, while evaporation is a process that involves energy absorption or input.

Learn more about condensation here brainly.com/question/956180

#SPJ4

In 7.00 x 10²² molecules of NaOH, there are 0.465 grams.

To find out how many grams are 7.00 x 10²² molecules of NaOH, we need to use Avogadro's number in the formula:

mass = number of molecules x molar mass / Avogadro's number

First, let's find the molar mass of NaOH.

So, the molar mass of NaOH is:

22.99 g/mol + 16.00 g/mol + 1.01 g/mol = 40.00 g/mol

Next, let's plug in the values into the formula:

mass = (7.00 x 10²² molecules) x (40.00 g/mol) / (6.02 x 10²³ molecules/mol)

mass = 2800 x 10²² g / 6.02 x 10²³

mass = 4.65 x 10⁻¹ g

mass = 0.465 g

So, 7.00 x 10²² molecules of NaOH are equal to 0.465 grams.

Learn more about Avogadro's number here https://brainly.com/question/29367909

#SPJ11

Therefore, the sample of hydrogen gas contains 0.164 moles of H2 molecules.

Moles (symbol: mol) is a unit of measurement that is commonly used in chemistry to express the amount of a substance. One mole is defined as the amount of a substance that contains as many elementary entities (such as atoms, molecules, or ions) as there are in 12 grams of carbon-12. The number of elementary entities in one mole is known as Avogadro's number, which is approximately 6.022 x 10^23. This means that one mole of any substance contains 6.022 x 10^23 elementary entities. The concept of moles is important in chemistry because it allows us to easily compare and relate the amount of different substances in chemical reactions. For example, if we know the number of moles of a reactant and the stoichiometry of a reaction, we can calculate the number of moles of product that will be produced. This makes it possible to predict and control the outcome of chemical reactions.

Here,

To solve this problem, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in kelvin.

First, we need to convert the temperature to kelvin:

T = 28°C + 273.15 = 301.15 K

Next, we can plug in the given values and solve for n:

n = (PV)/(RT)

n = (1.25 atm)(4.25 L)/(0.0821 L·atm/mol·K)(301.15 K)

n = 0.164 mol

To know more about moles,

https://brainly.com/question/14107397

#SPJ1

The formal charge of a nitrogen atom that has no lone pairs and forms two double bonds is +1

The formal charge of an atom is calculated by subtracting the number of lone pair electrons and half the number of bonding electrons from the number of valence electrons.

Nitrogen having atomic number 7 and electronic configuration 1s²2s²2p³ has five valence electrons. If it forms two double bonds, then it is sharing four electrons with each bond, for a total of 8 electrons. This means that nitrogen has lost 3 electrons compared to the neutral atom, due to which it will have a formal charge of +1.

To know more about formal charge here

https://brainly.com/question/30806728

#SPJ4

The type of plot that can be used to determine λ max of a solution is Absorbance vs wavelength.

The correct option is C.

The plot of absorbance vs wavelength is called an absorption spectrum or an absorbance spectrum.

In this plot, the x-axis represents the wavelength of light, usually in nanometers (nm), and the y-axis represents the absorbance of the sample at that particular wavelength. The absorbance is a measure of how much light is absorbed by the sample at a specific wavelength.

The absorption spectrum is used to identify the wavelengths at which a substance absorbs light and can be used to determine the identity or concentration of the substance. The pattern of peaks and troughs in the absorption spectrum is unique to each substance, making it a useful tool in analytical chemistry and biochemistry.

Learn more about absorbance and wavelength at: https://brainly.com/question/28178230

#SPJ1

Option (d) exothermic. An exothermic process is a chemical or physical process that releases energy in the form of heat.

This energy is typically released as a result of the formation of stronger bonds between atoms or molecules than existed in the reactants. For example, freezing, where a liquid turns into a solid, releases heat as the molecules slow down and form stronger bonds. Condensation, where a gas turns into a liquid, also releases heat as the molecules lose energy and form stronger intermolecular bonds. Exothermic processes are the opposite of endothermic processes, which absorb heat from the surroundings and store it as potential energy in the reactants.

Learn more about exothermic here: brainly.com/question/28143384

#SPJ4

The type of container breach that has been documented as causing a BLEVE is runway cracking.

BLEVE stands for Boiling liquid expanding vapor explosion. BLEVE generally refers to the failure of a closed container as a result of over pressurization caused by an external heat source. More precisely the major failure of a closed liquid container into two or more pieces when the temperature of the liquid is well above its boiling point at normal atmospheric pressure.

Runway cracking is generally defined as the process by which heavy hydrocarbon molecules are broken up into lighter molecules by means of heat and usually pressure and sometimes catalysts. Hence, option C is correct.

Learn more about runway cracking from the link given below.

https://brainly.com/question/20305377

#SPJ4

There are 6.75 moles of NaCl in 5.4 L of 1.25 M NaCl.

What are moles?

Moles is a unit used in chemistry to measure the amount of a substance. One mole of a substance is defined as the amount of that substance that contains as many elementary entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of carbon-12. The number of entities in one mole is known as Avogadro's number, which is approximately equal to 6.022 x 10^23.

To determine the number of moles of NaCl in 5.4 L of 1.25 M NaCl, we need to use the following formula:

moles = concentration x volume

where concentration is in units of M (moles per liter) and volume is in units of liters.

Substituting the given values, we get:

moles = 1.25 M x 5.4 L

moles = 6.75 mol

Therefore, there are 6.75 moles of NaCl in 5.4 L of 1.25 M NaCl.

To learn more about moles:

https://brainly.com/question/13314627

#SPJ1

56 g. Given that the density is 2.5 g/L, we know that 1 mole of any ideal gas takes up 22.4 L at STP conditions. Hence, we may conclude that this gas's molar mass is equal to 56 g if one mole of it weighs 56 g.

The atomic mass in g/mol is the element's typical molar mass. The atomic mass in AMU can also be used to compute molar mass by multiplying it by the molar mass constant (1 g/mol). Add together all the atomic masses of the constituent atoms to determine the molar mass of a compound with numerous atoms.

For instance, the ideal gas law asserts that, if the gas's mass and particle count are constant, the pressure, volume, and temperature of a gas are all precisely proportional to one another.

Given;

Density of the gas at STP = 2.5 g/L

At STP volume of the gas = 22.4 litres/mole

6.023×10∧23 molecules contains 1 mole of gas = Molar mass of gas

Density = mass / volume

2.5 = molar mass / 22.4

Molar mass = 56g/mol

To know more about the molar mass visit;

https://brainly.com/question/24191825

#SPJ1

This ability is best quantified by its electronegativity. Electronegativity is a measure of an atom's ability to attract a shared pair of electrons towards itself.

The higher the electronegativity, the more strongly an atom is able to attract the shared electrons, and the more polar the covalent bond is.  Electronegativity is a measure of the ability of an atom to attract electrons to itself when bonded with another atom. It is calculated on a scale from 0 to 4, with 0 being the least electronegative and 4 being the most electronegative. A higher electronegativity value indicates that the atom is more likely to attract electrons to itself, while a lower electronegativity value indicates that it is less likely to do so. Electronegativity therefore can be used to determine how electrons in a covalent bond are distributed between two atoms.

To learn more about electronegativity click here https://brainly.com/question/17762711

#SPJ4

The Kcat for the reaction at the pH 4.5 when no chloride is added when compound 3 is substrate is 2.5 × 10⁻² s⁻¹.

The concentration value of the enzyme is 5.0 uM, and the rate of the product formation for the compound 3 is 125 nM/s. The enzyme is saturated with the substrate because of the rate of the product synthesis and it did not change over the time of the first five minutes. The kcat value is  as follows :

Kcat = Vmax / [E]

= 125 nM/s / (5.0 uM)

= 2.5 × 10⁻² s⁻¹

thus, the Kcat value for the reaction  at the pH of 4.5 when no chloride is added and the compound 3 is the substrate is 2.5 × 10⁻² s⁻¹.

To learn more about Kcat here

https://brainly.com/question/4745688

#SPJ4

In decreasing sequence of base strength, we have: (CH3)2NH>CH3NH2>NH3>NH2Br amines are present.

The equivalent amine should be considered to be a stronger base. In this case, if the substituted ammonium cation is more stable. In this scenario, the sequence of basicity for aliphatic amines should be as follows: primary > secondary > tertiary. Inductive effect is determined as the reverse of the order.

The acid or base is more potent. The greater the dissociation constant, more potent it is. There is a relation between the strength of an acid as well as base. This is along with the electrolyte it creates. This is because electrolytes are formed as ions are released eventually into the solution. pH scales are used for acids and bases measurement.

Learn more about amines:

brainly.com/question/28522775

#SPJ4

The pi bond in the double bond breaks and the hydrogen moves towards a carbon, creating a covalent bond. Therefore, all the steps are correct.

A basic definition of an addition reaction in the context of organic chemistry is an organic process in which two or more molecules join to produce a single, bigger molecule (the adduct).

The polar covalent bond between the hydrogen and the halogen breaks. The pi bond in the double bond breaks and the hydrogen moves towards a carbon, creating a covalent bond and the hydrogen acting as a Lewis acid (accepting an electron pair). Since the other carbon has lost the electrons of the pi bond, it has now become a carbocation. The halogen forms a covalent bond with the carbocation to form a haloalkane.

Therefore, all the steps are correct.

To learn more about addition reaction, here:

https://brainly.com/question/29160052

#SPJ9

Answer:At STP, a mole of gas takes up 22.4 liters.

(This information can be deducted from ideal gas law)

So 15 liters correspond to x moles:

22.4 —- 1 mole

15 —- x

x = 0.67 moles

The complete combustion is the reaction:

CH4 (for example) + 2 O2 -> CO2 + 2 H2O

it is the same than

1/2 CH4 + O2 -> 1/2 CO2 + H2O

So the dioxide carbon producted will be 0.67/2 moles. Or, it will be 15/2 = 7.5 liters.

Notice that I used CH4 but I might used any organic compound instead. I used CH4 to be more pratical resulting 1 carbon atom in each side of the chemical equation.

Explanation:

Codility is a platform that offers online programming tests and coding challenges for software developers and engineers.

The tests and challenges are designed to assess a candidate's technical skills and programming proficiency. Codility's assessments cover a wide range of programming languages, including Java, Python, C++, JavaScript, and more. Codility's tests typically consist of a set of coding tasks or challenges that are designed to test a candidate's problem-solving abilities, programming skills, and ability to write efficient and readable code. Candidates are given a set of requirements for each task and are expected to write code that meets these requirements within a certain time limit. Codility provides solutions to its tests and challenges to help candidates understand how to approach the problems and improve their skills. These solutions can also be used by recruiters and hiring managers to evaluate a candidate's performance and suitability for a given role. In summary, Codility is a platform that offers online programming tests and coding challenges to assess a candidate's technical skills, and Codility test solutions are the answers and explanations to these tests and challenges.

Learn more about Codility here:

https://brainly.com/question/23160652

#SPJ4

Its formal charge will be 1+ if it has three bonds and one lone pair, like the hydronium ion does. Furthermore, oxygen can exist as a radical. For instance, an oxygen atom with one link, two lone pairs, and one unpaired (free radical) electron would have a formal charge of zero.

Focus instead for the time being on the three primary non-radical examples since they represent the majority of oxygen-containing compounds you will come across in organic chemistry.

Nitrogen

The formal charge of a nitrogen is zero if it has three bonds in addition to a lone pair. The formal charge is 1+ if there are four bonds

Nitrogen that is negatively charged has two bonds and two lone pairs, which is a somewhat unusual bonding configuration.

Sulfur and Phosphorus

Biological organic compounds frequently contain the third row elements phosphorus and sulfur. Although both of these elements have other bonding patterns that are significant in laboratory chemistry, in a biological setting sulfur almost always follows the same bonding/formal charge pattern as oxygen, whereas phosphorus is present in the form of the phosphate ion (PO43), where it has five bonds (almost always to oxygen), no lone pairs, and a formal charge of zero. Keep in mind that elements in the third row of the periodic table have d orbitals in addition to s and p orbitals, therefore they are not constrained by the octet.

Learn more about formal charge  here

https://brainly.com/question/11723212

#SPJ4

Phosphorus atom and Sulphur atom will have a formal charge of zero.

To determine the formal charge on an atom, we need to compare the number of valence electrons on the neutral atom to the number of electrons it "owns" in the molecule. The number of valence electrons on an atom is equal to its group number in the periodic table.

A) Oxygen has 6 valence electrons. If it forms three bonds and has one lone pair, it "owns" 4 electrons in the molecule. Its formal charge would be:

FC = 6 - 3 - 2 = 1

Therefore, oxygen in this configuration would not have a formal charge of 0.

B) Sulfur has 6 valence electrons. If it forms four bonds and has no lone pairs, it "owns" 8 electrons in the molecule. Its formal charge would be:

FC = 6 - 4 - 0 = 2

Therefore, sulphur in this configuration would not have a formal charge of 0.

C) Phosphorus has 5 valence electrons. If it forms three bonds and has one lone pair, it "owns" 4 electrons in the molecule. Its formal charge would be:

FC = 5 - 3 - 2 = 0

Therefore, phosphorus in this configuration would have a formal charge of 0.

D) Sulfur has 6 valence electrons. If it forms two bonds and has two lone pairs, it "owns" 6 electrons in the molecule. Its formal charge would be:

FC = 6 - 2 - 4 = 0

Therefore, sulfur in this configuration would have a formal charge of 0.

E) Nitrogen has 5 valence electrons. If it forms two bonds and has two lone pairs, it "owns" 4 electrons in the molecule. Its formal charge would be:

FC = 5 - 2 - 4 = -1

Therefore, nitrogen in this configuration would not have a formal charge of 0.

F) Nitrogen has 5 valence electrons. If it forms four bonds and has no lone pairs, it "owns" 8 electrons in the molecule. Its formal charge would be:

FC = 5 - 4 - 0 = 1

Therefore, nitrogen in this configuration would not have a formal charge of 0.

Therefore, only options (D) and (C) correspond to atoms with a formal charge of 0.

To learn more about Formal charge

https://brainly.com/question/11723212

#SPJ4

A model Suppose that each molecule has a surface area of 2.1–10 cm2. 3. Combine the data from steps 1 and 2 with the previous conversion factors to produce the

Is Water a Molecule?

Molecules are created when atoms are combined. Two h (H) ions one and oxygen (O) atom make all four atoms that make up a water molecule. As a consequence, water is occasionally abbreviated as H2O. There are billions of water molecules in a single drop of liquid.

What do molecules and atoms do?

Atoms are referred to as the "basic building units of matter." The tiniest parts of a substance are the features of a chemical element. One or more atoms are joined together to form molecules using covalent (chemical) bonds.

To know more about Molecule visit:

https://brainly.com/question/30465503

#SPJ4

At STP, a mole of pure gas is closest in size to a marble. As a tiny, solid material, a gram of gas at the STP is considerably smaller than a marble. D is the correct response.

At Standard Pressure and Temperature, 22.4 L of any gas will be required to hold 1 mole (STP). The Ideal Gas Law and a balanced chemical equation can be used to determine the amount or mass of gas consumed or created in a chemical process. In other words, the gas that has the greatest number of molecules of a certain gas at a given temperature will occupy the largest volume.

Learn more about STP

brainly.com/question/29356493

#SPJ4

Question: From the following items, which is closest in size to one mole of gas at STP?

A) A car

B) An elephant

C) A microwave

D) A marble

Both the statement of the resonance and resonance structure of thiocyanate ion given in the question is False.

Resonance can occur even when the elements in a molecule do not keep the same formal charge. In fact, one of the main features of resonance is that it allows for the delocalization of electrons in a molecule, which can lead to the distribution of formal charge over multiple atoms. This delocalization can result in the stabilization of the molecule and increased reactivity. The resonance structures of the thiocyanate ion, SCN⁻, are not equivalent. The thiocyanate ion has two resonance structures, one where the negative charge is on the nitrogen atom and the other where the negative charge is on the sulfur atom. These two resonance structures are not equivalent because they have different atom connectivity and formal charges. In the nitrogen resonance structure, nitrogen has a formal charge of -1 and sulfur has a formal charge of +1, while in the sulfur resonance structure, sulfur has a formal charge of -1 and nitrogen has a formal charge of +1. However, both resonance structures contribute to the overall description of the molecule, which is an important feature of resonance.

To learn more about thiocyanate ion click here

brainly.com/question/6285077

#SPJ4

Complete Question

Resonance can only occur when the elements in the molecule keep the same formal charge. True False. The resonance structures of thiocyanate ion, SCN⁻ are equivalent. True False

False. Both the statement of the resonance and resonance structure of thiocyanate ion given in the question . Resonance can occur even when the elements in a molecule do not keep the same formal charge.

In fact, one of the main features of resonance is that it allows for the delocalization of electrons in a molecule, which can lead to the distribution of formal charge over multiple atoms. This delocalization can result in the stabilization of the molecule and increased reactivity. The resonance structures of the thiocyanate ion, SCN⁻, are not equivalent. The thiocyanate ion has two resonance structures, one where the negative charge is on the nitrogen atom and the other where the negative charge is on the sulfur atom. These two resonance structures are not equivalent because they have different atom connectivity and formal charges. In the nitrogen resonance structure, nitrogen has a formal charge of -1 and sulfur has a formal charge of +1, while in the sulfur resonance structure, sulfur has a formal charge of -1 and nitrogen has a formal charge of +1. However, both resonance structures contribute to the overall description of the molecule, which is an important feature of resonance.

learn more about thiocyanate ion  here:

brainly.com/question/6285077

#SPJ4

The main difference between cis and trans isomers lies in the configuration of atoms in the double bonds. Cis isomers contain two similar atoms lying on identical sides of the double bond in a molecule.

Trans isomers have molecules with two identical atoms that are positioned on opposite sides of double bond. Cis isomers are molecules with the identical connectivity of atoms. They attribute some side groups positioned on the same side of a double bond. Trans isomers are part molecules with same side groups put on opposite sides of a double bond. Cis isomers are basically invariably polar. Trans isomers are not absolutely polar. Multiple trans isomers are non-polar molecules. Due to loosely compacted molecules, cis isomers have somewhat lower melting points than trans isomers.

To learn more about isomers visit here:

https://brainly.com/question/18474884

#SPJ4

The grams in to the moles is as follows :

The number of moles = mass in grams / molar mass in grams /mol

The conversion in between the moles and the grams is the typical. The grams to the moles conversion is related to the the atomic weight. One mole of the material comprises of the Avogadro number of the atoms. The grams to the moles conversion formula is as follows :

The number of moles = mass in grams / molar mass in grams /mol

The number of the moles of the substance can be calculated by the divinding the mass to the molar mass of the substance.

To learn more about moles here

https://brainly.com/question/11543816

#SPJ4